Package: linux-2.6 Version: 3.0.0-1 Severity: important Hi!
I was using my computer and saw a kernel BUG: Aug 11 08:58:13 sti-nelson kernel: [144574.621166] kernel BUG at /tmp/buildd/linux-2.6-3.0.0/debian/build/source_amd64_none/mm/slab.c:3059! Aug 11 08:58:13 sti-nelson kernel: [144574.621176] invalid opcode: 0000 [#1] SMP Aug 11 08:58:13 sti-nelson kernel: [144574.621190] CPU 1 Aug 11 08:58:13 sti-nelson kernel: [144574.621193] Modules linked in: des_generic ecb md4 hmac nls_utf8 cifs fscache btrfs zlib_deflate crc32c libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext3 jbd ext2 ip6table_filter ip6_tables ebtable_nat ebtables ipt_REJECT xt_CHECKSUM iptable_mangle xt_tcpudp iptable_filter ip_tables x_tables bridge stp powernow_k8 cpufreq_conservative cpufreq_userspace cpufreq_stats mperf cpufreq_powersave ppdev lp binfmt_misc fuse loop kvm_amd kvm usbhid hid snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device ohci_hcd snd ehci_hcd nouveau ttm drm_kms_helper drm usbcore sg soundcore k8temp r8169 sr_mod mii i2c_algo_bit mxm_wmi wmi sp5100_tco edac_core ata_generic i2c_piix4 edac_mce_amd snd_page_alloc i2c_core video evdev cdrom pata_atiixp parport_pc floppy psmouse parport button serio_raw processor ext4 mbcache jbd2 crc16 dm_mod sd_mod crc_t10dif ahci libahci fan thermal therma l_sys libata scsi_mod Aug 11 08:58:13 sti-nelson kernel: [144574.621406] Aug 11 08:58:13 sti-nelson kernel: [144574.621410] Pid: 25134, comm: chromium Not tainted 3.0.0-1-amd64 #1 Itautec S.A. Infoway/SM 3321 Aug 11 08:58:13 sti-nelson kernel: [144574.621422] RIP: 0010:[<ffffffff810ec222>] [<ffffffff810ec222>] ____cache_alloc+0x133/0x258 Aug 11 08:58:13 sti-nelson kernel: [144574.621436] RSP: 0018:ffff880138f0fe58 EFLAGS: 00010046 Aug 11 08:58:13 sti-nelson kernel: [144574.621442] RAX: ffff88007d03e000 RBX: ffff88013f000040 RCX: 0000000000000070 Aug 11 08:58:13 sti-nelson kernel: [144574.621450] RDX: 000000000000002c RSI: dead000000100100 RDI: ffff88013f044450 Aug 11 08:58:13 sti-nelson kernel: [144574.621457] RBP: 0000000000000010 R08: ffff88013f044460 R09: 0000000000000010 Aug 11 08:58:13 sti-nelson kernel: [144574.621464] R10: 000000000000005b R11: 0000000000000246 R12: ffff88013af42800 Aug 11 08:58:13 sti-nelson kernel: [144574.621471] R13: ffff88013f044440 R14: 0000000000000000 R15: 00000000000492d0 Aug 11 08:58:13 sti-nelson kernel: [144574.621479] FS: 00007ffbfbd22960(0000) GS:ffff88013fc80000(0000) knlGS:000000000c098840 Aug 11 08:58:13 sti-nelson kernel: [144574.621487] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Aug 11 08:58:13 sti-nelson kernel: [144574.621494] CR2: 00007ffbfd997fa0 CR3: 0000000138e4d000 CR4: 00000000000006e0 Aug 11 08:58:13 sti-nelson kernel: [144574.621501] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Aug 11 08:58:13 sti-nelson kernel: [144574.621508] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Aug 11 08:58:13 sti-nelson kernel: [144574.621516] Process chromium (pid: 25134, threadinfo ffff880138f0e000, task ffff880139bad0e0) Aug 11 08:58:13 sti-nelson kernel: [144574.621524] Stack: Aug 11 08:58:13 sti-nelson kernel: [144574.621527] 0000000000012c00 ffffffff0000003c ffff88000243eee0 0000000000000000 Aug 11 08:58:13 sti-nelson kernel: [144574.621540] 0000000000000020 ffff88013f000040 00000000000080d0 00000000000080d0 Aug 11 08:58:13 sti-nelson kernel: [144574.621551] 0000000000000292 ffffffff810ecd4b ffff880138f0ff48 0000000000000000 A picture with a call trace (that isn't available in the log file) is available at http://people.debian.org/~naoliv/misc/kernel-bug-slab.jpg I was able to find only this on google: https://lkml.org/lkml/2011/8/4/308 I can give more information or test any patch if needed. Thank you! Best regards, Nelson -- Package-specific info: ** Version: Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (b...@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=c73f4307-2dce-4e31-939c-e6cb20668551 ro quiet ** Not tainted ** Kernel log: [ 4.686026] nouveau 0000:01:00.0: setting latency timer to 64 [ 4.687228] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096d80c1) [ 4.690301] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 4.753693] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 4.753697] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 4.753700] [drm] nouveau 0000:01:00.0: Bios version 62.94.64.00 [ 4.753703] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 4.753706] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 4.753710] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04011310 00000028 [ 4.753712] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030 [ 4.753714] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02000300 00000028 [ 4.753717] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00c0c080 [ 4.753720] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 4.753723] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 4.753726] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [ 4.753729] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 4.753731] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 4.753734] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 4.753738] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD2D9 [ 4.778881] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD756 [ 4.782222] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE7A6 [ 4.782231] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE8C7 [ 4.783301] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEB44 [ 4.783306] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEBA9 [ 4.796035] usb 2-1: new low speed USB device number 2 using ohci_hcd [ 4.803152] [drm] nouveau 0000:01:00.0: 0xEBA9: Condition still not met after 20ms, skipping following opcodes [ 4.807177] [drm] nouveau 0000:01:00.0: timingset 255 does not exist [ 4.825824] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 4.825828] [drm] nouveau 0000:01:00.0: 3: memory 400MHz core 550MHz shader 1350MHz fanspeed 100% [ 4.825842] [drm] nouveau 0000:01:00.0: c: memory 399MHz core 400MHz shader 800MHz [ 4.825897] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.825900] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.825902] usb usb6: Product: OHCI Host Controller [ 4.825904] usb usb6: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd [ 4.825906] usb usb6: SerialNumber: 0000:00:13.4 [ 4.825946] [TTM] Zone kernel: Available graphics memory: 2031438 kiB. [ 4.825948] [TTM] Initializing pool allocator. [ 4.825966] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [ 4.827055] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 4.835830] hub 6-0:1.0: USB hub found [ 4.835838] hub 6-0:1.0: 2 ports detected [ 4.836308] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 4.836310] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing [ 4.836905] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.836907] [drm] No driver support for vblank timestamp query. [ 4.840180] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.914706] hda_codec: ALC883: BIOS auto-probing. [ 4.920734] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input2 [ 4.965055] usb 2-1: New USB device found, idVendor=413c, idProduct=2003 [ 4.965059] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.965062] usb 2-1: Product: Dell USB Keyboard [ 4.965063] usb 2-1: Manufacturer: Dell [ 5.059886] [drm] nouveau 0000:01:00.0: allocated 1440x1024 fb: 0x40000000, bo ffff880136de1c00 [ 5.059948] fbcon: nouveaufb (fb0) is primary device [ 5.100031] usb 2-2: new low speed USB device number 3 using ohci_hcd [ 5.124839] Console: switching to colour frame buffer device 160x56 [ 5.126637] fb0: nouveaufb frame buffer device [ 5.126639] drm: registered panic notifier [ 5.126719] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 5.267057] usb 2-2: New USB device found, idVendor=093a, idProduct=2510 [ 5.267061] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.267064] usb 2-2: Product: USB OPTICAL MOUSE [ 5.267065] usb 2-2: Manufacturer: PIXART [ 5.884307] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input3 [ 5.884403] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-1/input0 [ 5.889243] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input4 [ 5.889347] generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0 [ 5.889363] usbcore: registered new interface driver usbhid [ 5.889365] usbhid: USB HID core driver [ 6.092217] kvm: Nested Virtualization enabled [ 6.810070] Adding 3929084k swap on /dev/sda3. Priority:-1 extents:1 across:3929084k [ 6.814112] EXT4-fs (sda1): re-mounted. Opts: (null) [ 7.027379] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.173003] loop: module loaded [ 7.715888] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 8.918932] r8169 0000:02:00.0: eth0: link down [ 8.918939] r8169 0000:02:00.0: eth0: link down [ 8.919497] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.111447] fuse init (API version 7.16) [ 11.667668] r8169 0000:02:00.0: eth0: link up [ 11.668250] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.621588] lp0: using parport0 (interrupt-driven). [ 15.785340] ppdev: user-space parallel port driver [ 20.018484] Bridge firewalling registered [ 20.407561] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.716372] ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 21.416698] Ebtables v2.0 registered [ 21.539774] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.541246] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00) [ 21.541300] powernow-k8: fid 0x15 (2900 MHz), vid 0x7 [ 21.541302] powernow-k8: fid 0x14 (2800 MHz), vid 0x8 [ 21.541304] powernow-k8: fid 0x12 (2600 MHz), vid 0xa [ 21.541305] powernow-k8: fid 0x10 (2400 MHz), vid 0xc [ 21.541307] powernow-k8: fid 0xe (2200 MHz), vid 0xe [ 21.541308] powernow-k8: fid 0xc (2000 MHz), vid 0x10 [ 21.541310] powernow-k8: fid 0xa (1800 MHz), vid 0x10 [ 21.541312] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 27.321951] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.890055] EXT4-fs (sda2): re-mounted. Opts: commit=0 [ 56.072181] exe (2621): /proc/2621/oom_adj is deprecated, please use /proc/2621/oom_score_adj instead. ** Model information sys_vendor: Itautec S.A. product_name: Infoway product_version: Corp chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: Itautec SM 3321 BIOS bios_version: Itautec SM 3321 BIOS Revision 0204 board_vendor: Itautec S.A. board_name: SM 3321 board_version: SM-3321 Padrao 04(Itautec_M) ** Loaded modules: Module Size Used by ip6table_filter 12540 0 powernow_k8 17688 1 ip6_tables 22263 1 ip6table_filter cpufreq_conservative 13147 0 ebtable_nat 12580 0 cpufreq_userspace 12576 0 ebtables 26250 1 ebtable_nat cpufreq_stats 12862 0 mperf 12453 1 powernow_k8 ipt_REJECT 12502 2 xt_CHECKSUM 12471 1 iptable_mangle 12536 1 cpufreq_powersave 12454 0 xt_tcpudp 12570 5 iptable_filter 12536 1 ip_tables 22131 2 iptable_mangle,iptable_filter x_tables 19024 9 ip6table_filter,ip6_tables,ebtables,ipt_REJECT,xt_CHECKSUM,iptable_mangle,xt_tcpudp,iptable_filter,ip_tables bridge 66612 0 stp 12435 1 bridge ppdev 12763 0 lp 17270 0 binfmt_misc 13040 1 fuse 62334 1 loop 22711 0 kvm_amd 51180 0 kvm 268970 1 kvm_amd usbhid 40516 0 hid 73172 1 usbhid snd_hda_codec_realtek 278027 1 snd_hda_intel 26140 3 snd_hda_codec 72699 2 snd_hda_codec_realtek,snd_hda_intel nouveau 512637 2 snd_hwdep 13186 1 snd_hda_codec snd_pcm 68104 3 snd_hda_intel,snd_hda_codec snd_seq 45208 0 snd_timer 22581 3 snd_pcm,snd_seq snd_seq_device 13137 1 snd_seq snd 52823 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device ohci_hcd 26576 0 sg 25985 0 sp5100_tco 12900 0 i2c_piix4 12536 0 ttm 52979 1 nouveau drm_kms_helper 27216 1 nouveau drm 163231 4 nouveau,ttm,drm_kms_helper edac_core 35343 0 ehci_hcd 40090 0 sr_mod 21811 0 edac_mce_amd 17103 0 usbcore 124242 4 usbhid,ohci_hcd,ehci_hcd r8169 42411 0 ata_generic 12479 0 i2c_algo_bit 12850 1 nouveau i2c_core 23909 5 nouveau,i2c_piix4,drm_kms_helper,drm,i2c_algo_bit soundcore 13152 1 snd snd_page_alloc 13043 2 snd_hda_intel,snd_pcm mxm_wmi 12473 1 nouveau wmi 13243 1 mxm_wmi mii 12675 1 r8169 video 17707 1 nouveau k8temp 12531 0 cdrom 35093 1 sr_mod pata_atiixp 12697 0 floppy 53265 0 parport_pc 22395 1 processor 27942 1 powernow_k8 evdev 17558 7 parport 31929 3 ppdev,lp,parport_pc button 12930 1 nouveau psmouse 55656 0 serio_raw 12846 0 ext4 313917 2 mbcache 13066 1 ext4 jbd2 62574 1 ext4 crc16 12343 1 ext4 dm_mod 63164 0 sd_mod 36259 4 crc_t10dif 12348 1 sd_mod ahci 25089 3 libahci 22767 1 ahci libata 149043 4 ata_generic,pata_atiixp,ahci,libahci fan 12674 0 thermal 17426 0 thermal_sys 17949 4 video,processor,fan,thermal scsi_mod 162442 4 sg,sr_mod,sd_mod,libata ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] Subsystem: ASUSTeK Computer Inc. Device [1043:826d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f900 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: ASUSTeK Computer Inc. Device [1043:8349] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: ASUSTeK Computer Inc. Device [1043:81ef] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fde00000-fdefffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9400 GT] [10de:065b] (rev a1) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device [1682:236d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at df00 [size=128] Expansion ROM at fbf80000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 42 Region 0: I/O ports at ee00 [size=256] Region 2: Memory at fddff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdc00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (100, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores) Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.3 Linux image base package ii module-init-tools 3.16-1 tools for managing Linux kernel mo Versions of packages linux-image-3.0.0-1-amd64 recommends: ii firmware-linux-free 3 Binary firmware for various driver Versions of packages linux-image-3.0.0-1-amd64 suggests: ii extlinux 2:4.04+dfsg-3 collection of boot loaders (ext2/3 ii grub-pc 1.99-11 GRand Unified Bootloader, version pn linux-doc-3.0.0 <none> (no description available) Versions of packages linux-image-3.0.0-1-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.33 Binary firmware for various driver ii firmware-linux-nonfree 0.33 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk: linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false * linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110811122204.2855.99203.report...@sti-nelson.foa.unesp.br
