Package: linux-2.6
Version: 2.6.32-35
Severity: important
Hello, it seems like my video driver is failing. My screen just switches off
itself and I see the following messages in my dmesg:
{ *** BEGIN OF dmesg OUTPUT CHUNK ***
[ 7.097844] [drm] radeon kernel modesetting enabled.
[ 7.097908] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.097914] radeon 0000:01:00.0: setting latency timer to 64
[ 7.099510] [drm] radeon: Initializing kernel modesetting.
[ 7.099694] [drm] register mmio base: 0xFE9E0000
[ 7.099696] [drm] register mmio size: 65536
[ 7.099826] ATOM BIOS: RV635PRO
[ 7.099841] [drm] Clocks initialized !
[ 7.099858] mtrr: type mismatch for d0000000,10000000 old: write-back new:
write-combining
[ 7.099861] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.099862] [drm] RAM width 128bits DDR
[ 7.099900] [TTM] Zone kernel: Available graphics memory: 2030490 kiB.
[ 7.099916] [drm] radeon: 256M of VRAM memory ready
[ 7.099918] [drm] radeon: 512M of GTT memory ready.
[ 7.099950] alloc irq_desc for 28 on node -1
[ 7.099952] alloc kstat_irqs on node -1
[ 7.099964] radeon 0000:01:00.0: irq 28 for MSI/MSI-X
[ 7.099968] radeon 0000:01:00.0: radeon: using MSI.
[ 7.099993] [drm] radeon: irq initialized.
[ 7.099995] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.100572] [drm] Loading RV635 Microcode
[ 7.100576] platform radeon_cp.0: firmware: requesting radeon/RV635_pfp.bin
[ 7.155453] r600_cp: Failed to load firmware "radeon/RV635_pfp.bin"
[ 7.155495] [drm:r600_startup] *ERROR* Failed to load firmware!
[ 7.155532] radeon 0000:01:00.0: disabling GPU acceleration
[ 7.155597] radeon 0000:01:00.0: ffff88012c2fe000 unpin not necessary
[ 7.155600] radeon 0000:01:00.0: ffff88012c2fe000 unpin not necessary
[ 7.155618] [drm] Enabling audio support
[ 7.155727] [drm] Default TV standard: NTSC
[ 7.155795] [drm] Radeon Display Connectors
[ 7.155797] [drm] Connector 0:
[ 7.155798] [drm] DVI-I
[ 7.155799] [drm] HPD1
[ 7.155802] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 7.155803] [drm] Encoders:
[ 7.155805] [drm] DFP1: INTERNAL_UNIPHY
[ 7.155807] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.155808] [drm] Connector 1:
[ 7.155810] [drm] DIN
[ 7.155811] [drm] Encoders:
[ 7.155812] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 7.155813] [drm] Connector 2:
[ 7.155815] [drm] DVI-I
[ 7.155816] [drm] HPD2
[ 7.155818] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 7.155820] [drm] Encoders:
[ 7.155821] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.155822] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 7.305072] [drm] fb mappable at 0xD0040000
[ 7.305075] [drm] vram apper at 0xD0000000
[ 7.305077] [drm] size 8294400
[ 7.305078] [drm] fb depth is 24
[ 7.305079] [drm] pitch is 7680
[ 7.319339] Console: switching to colour frame buffer device 240x67
[ 7.325068] fb0: radeondrmfb frame buffer device
[ 7.325069] registered panic notifier
[ 7.325074] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on
minor 0
[ 8798.657508] [drm:r600_audio_bits_per_sample] *ERROR* Unknown bits per sample
0xf using 16 instead.
}*** END OF dmesg OUTPUT CHUNK ***
The last line in log is [drm:r600_audio_bits_per_sample] *ERROR* Unknown bits
per sample 0xf using 16 instead and I see a lot of them ... The only way to
recover from this situation is to reboot machine.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=b88c9b9a-8744-4408-a480-58770bb6671d ro quiet
** Not tainted
** Kernel log:
[ 4.484359] [drm] DIN
[ 4.484360] [drm] Encoders:
[ 4.484361] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 4.484362] [drm] Connector 2:
[ 4.484363] [drm] DVI-I
[ 4.484364] [drm] HPD2
[ 4.484366] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 4.484367] [drm] Encoders:
[ 4.484368] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.484369] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 4.529012] usb 3-3: new high speed USB device using ehci_hcd and address 2
[ 4.628680] alloc irq_desc for 22 on node -1
[ 4.628683] alloc kstat_irqs on node -1
[ 4.628690] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 4.628739] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.631579] [drm] fb mappable at 0xD0040000
[ 4.631581] [drm] vram apper at 0xD0000000
[ 4.631582] [drm] size 8294400
[ 4.631583] [drm] fb depth is 24
[ 4.631584] [drm] pitch is 7680
[ 4.645749] Console: switching to colour frame buffer device 240x67
[ 4.650354] fb0: radeondrmfb frame buffer device
[ 4.650356] registered panic notifier
[ 4.650360] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on
minor 0
[ 4.688991] usb 3-3: New USB device found, idVendor=145f, idProduct=0142
[ 4.688994] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 4.688997] usb 3-3: Product: Trust Webcam
[ 4.688998] usb 3-3: Manufacturer:
[ 4.689085] usb 3-3: configuration #1 chosen from 1 choice
[ 4.840119] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input4
[ 4.842650] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 4.842698] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 4.846016] Linux video capture interface: v2.00
[ 4.883808] uvcvideo: Found UVC 1.00 device Trust Webcam (145f:0142)
[ 4.891204] input: Trust Webcam as
/devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/input/input5
[ 4.891252] usbcore: registered new interface driver uvcvideo
[ 4.891254] USB Video Class driver (v0.1.0)
[ 5.018456] 2:3:1: cannot get freq at ep 0x84
[ 5.027954] usbcore: registered new interface driver snd-usb-audio
[ 5.160015] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 5.316199] usb 7-2: New USB device found, idVendor=045e, idProduct=070f
[ 5.316202] usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.316205] usb 7-2: Product: Microsoft LifeChat LX-3000
[ 5.316293] usb 7-2: configuration #1 chosen from 1 choice
[ 5.486036] usbcore: registered new interface driver hiddev
[ 5.489252] input: Microsoft LifeChat LX-3000 as
/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.3/input/input6
[ 5.489341] generic-usb 0003:045E:070F.0001: input,hidraw0: USB HID v1.00
Device [Microsoft LifeChat LX-3000 ] on usb-0000:00:1d.1-2/input3
[ 5.489364] usbcore: registered new interface driver usbhid
[ 5.489366] usbhid: v2.6:USB HID core driver
[ 5.632016] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 5.844486] Adding 2882552k swap on /dev/sda7. Priority:-1 extents:1
across:2882552k
[ 5.889949] usb 8-1: New USB device found, idVendor=04d9, idProduct=1603
[ 5.889952] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.889954] usb 8-1: Product: USB Keyboard
[ 5.889955] usb 8-1: Manufacturer:
[ 5.890045] usb 8-1: configuration #1 chosen from 1 choice
[ 5.941183] input: USB Keyboard as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input7
[ 5.941248] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10
Keyboard [ USB Keyboard] on usb-0000:00:1d.2-1/input0
[ 6.017690] loop: module loaded
[ 6.032032] input: USB Keyboard as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input8
[ 6.032110] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10
Device [ USB Keyboard] on usb-0000:00:1d.2-1/input1
[ 6.268011] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 6.341186] fuse init (API version 7.13)
[ 6.453892] usb 8-2: New USB device found, idVendor=045e, idProduct=0047
[ 6.453895] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 6.453898] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 6.453900] usb 8-2: Manufacturer: Microsoft
[ 6.453999] usb 8-2: configuration #1 chosen from 1 choice
[ 6.472117] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input9
[ 6.472200] generic-usb 0003:045E:0047.0004: input,hidraw3: USB HID v1.10
Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1d.2-2/input0
[ 8.322337] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
[ 8.322453] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<1000 Mbps Full
Duplex>
[ 8.322898] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.323383] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.662478] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 8.662480] vboxdrv: Successfully done.
[ 8.662482] vboxdrv: Found 4 processor cores.
[ 8.662635] VBoxDrv: dbg - g_abExecMemory=ffffffffa03816c0
[ 8.662689] vboxdrv: fAsync=0 offMin=0x195 offMax=0x1950
[ 8.662730] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 8.662732] vboxdrv: Successfully loaded version 3.2.10_OSE (interface
0x00140001).
[ 9.598809] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input10
[ 12.665449] Bluetooth: Core ver 2.15
[ 12.665504] NET: Registered protocol family 31
[ 12.665506] Bluetooth: HCI device and connection manager initialized
[ 12.665508] Bluetooth: HCI socket layer initialized
[ 12.686408] Bluetooth: L2CAP ver 2.14
[ 12.686410] Bluetooth: L2CAP socket layer initialized
[ 12.702950] Bluetooth: RFCOMM TTY layer initialized
[ 12.702954] Bluetooth: RFCOMM socket layer initialized
[ 12.702956] Bluetooth: RFCOMM ver 1.11
[ 12.763814] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.763817] Bluetooth: BNEP filters: protocol multicast
[ 12.795528] Bridge firewalling registered
[ 12.864069] Bluetooth: SCO (Voice Link) ver 0.6
[ 12.864071] Bluetooth: SCO socket layer initialized
[ 13.526908] lp: driver loaded but no devices found
[ 13.599201] ppdev: user-space parallel port driver
[ 19.068006] eth0: no IPv6 routers present
[ 34.600889] 2:3:1: cannot get freq at ep 0x84
** Model information
sys_vendor: System manufacturer
product_name: P5QL PRO
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1004
board_vendor: ASUSTeK Computer INC.
board_name: P5QL PRO
board_version: Rev 1.xx
** Loaded modules:
Module Size Used by
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7225 2
bridge 39630 0
stp 1440 1 bridge
bnep 9427 2
rfcomm 29613 0
l2cap 24736 6 bnep,rfcomm
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
rfkill 13044 2 bluetooth
acpi_cpufreq 5571 0
cpufreq_userspace 1992 0
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
cpufreq_powersave 902 0
vboxnetadp 4193 0
vboxnetflt 12525 0
vboxdrv 1723671 2 vboxnetadp,vboxnetflt
uinput 6376 1
fuse 50892 5
loop 11799 0
usbhid 33292 0
hid 63257 1 usbhid
snd_usb_audio 64070 3
snd_hda_codec_atihdmi 2251 1
snd_usb_lib 13960 1 snd_usb_audio
uvcvideo 52079 0
snd_seq_midi 4400 0
videodev 29993 1 uvcvideo
snd_hda_codec_realtek 235602 1
snd_seq_midi_event 4628 1 snd_seq_midi
v4l1_compat 11442 2 uvcvideo,videodev
snd_rawmidi 15515 2 snd_usb_lib,snd_seq_midi
v4l2_compat_ioctl32 8474 1 videodev
snd_hda_intel 20035 0
snd_hda_codec 54244 3
snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 2 snd_usb_audio,snd_hda_codec
radeon 574844 2
snd_pcm 60503 4 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
ttm 40146 1 radeon
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 7830 0
snd 46526 15
snd_usb_audio,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
psmouse 49937 0
drm_kms_helper 20369 1 radeon
evdev 7352 22
button 4650 0
asus_atk0110 7686 0
soundcore 4598 1 snd
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
drm 142327 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
i2c_core 15819 6
videodev,radeon,i2c_i801,drm_kms_helper,drm,i2c_algo_bit
pcspkr 1699 0
processor 29935 1 acpi_cpufreq
serio_raw 3752 0
ext4 288318 1
mbcache 5050 1 ext4
jbd2 67015 1 ext4
crc16 1319 2 l2cap,ext4
sg 24069 0
sr_mod 12602 0
sd_mod 29921 5
cdrom 29415 1 sr_mod
crc_t10dif 1276 1 sd_mod
ata_generic 3239 0
pata_marvell 2629 0
ata_piix 21124 4
atl1e 27041 0
libata 133760 3 ata_generic,pata_marvell,ata_piix
scsi_mod 126517 4 sg,sr_mod,sd_mod,libata
uhci_hcd 18521 0
ehci_hcd 32081 0
thermal 11674 0
thermal_sys 11942 2 processor,thermal
usbcore 122498 7
usbhid,snd_usb_audio,snd_usb_lib,uvcvideo,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:22:15:88:36:bd brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0
inet6 fe80::222:15ff:fe88:36bd/64 scope link
valid_lft forever preferred_lft forever
3: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 16:c1:0e:c6:88:18 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 3591643 3387 0 0 0 0 0 0 3591643
3387 0 0 0 0 0 0
eth0:21473752 16165 0 0 0 0 0 92 1165506
10116 0 0 0 0 1 0
vboxnet0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
19542 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
19522 incoming packets delivered
13413 requests sent out
Icmp:
8 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 8
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 8
Tcp:
198 active connections openings
9 passive connection openings
22 failed connection attempts
1 connection resets received
20 connections established
18750 segments received
12830 segments send out
31 segments retransmited
0 bad segments received.
95 resets sent
Udp:
580 packets received
0 packets to unknown port received.
0 packet receive errors
552 packets sent
UdpLite:
TcpExt:
76 TCP sockets finished time wait in fast timer
2420 delayed acks sent
Quick ack mode was activated 4 times
1325 packets directly queued to recvmsg prequeue.
3286986 bytes directly received in process context from prequeue
12510 packet headers predicted
1217 packets header predicted and directly queued to user
433 acknowledgments not containing data payload received
2509 predicted acknowledgments
4 congestion windows recovered without slow start after partial ack
2 timeouts after SACK recovery
9 retransmits in slow start
14 other TCP timeouts
4 DSACKs sent for old packets
4 DSACKs received
4 connections reset due to unexpected data
1 connections reset due to early user close
1 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 2
TCPSackShiftFallback: 6
IpExt:
InMcastPkts: 90
OutMcastPkts: 64
InBcastPkts: 186
InOctets: 24858192
OutOctets: 4594648
InMcastOctets: 11271
OutMcastOctets: 8733
InBcastOctets: 25835
*** Device features:
eth0: 0x11989
lo: 0x13865
pan0: 0xff3865
vboxnet0: 0x0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root
Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:82fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe8f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f03fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe8ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface
Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8ff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a880 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a480 [size=16]
Region 5: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon
HD 3600 Series [1002:9598] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device [1787:2002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe9e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at c000 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: ATI Technologies Inc RV635 Audio device [Radeon HD
3600 Series] [1002:aa20]
Subsystem: Hightech Information System Ltd. Device [1787:aa20]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
02:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114
Gigabit or Fast Ethernet [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-CM Motherboard [1043:8304]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at feac0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at dc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101
single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP
SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
** USB devices:
Bus 008 Device 003: ID 045e:0047 Microsoft Corp. IntelliMouse Explorer 3.0
Bus 008 Device 002: ID 04d9:1603 Holtek Semiconductor, Inc.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 045e:070f Microsoft Corp.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 145f:0142 Trust WB-6250X Webcam
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-35 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-35 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20110810205914.2710.62553.reportbug@sv1
