Package: linux-2.6
Version: 3.0.0-1
Severity: normal
Hi!
Today I did an upgrade to latest the Kernel release and after a short time
had the system stopped with this:
Jul 25 09:04:19 sti-nelson kernel: [ 670.769745] BUG: unable to handle kernel
NULL pointer dereference at 00000000000000a0
Jul 25 09:04:19 sti-nelson kernel: [ 670.769774] IP: [<ffffffff81336123>]
down_write+0x16/0x27
Jul 25 09:04:19 sti-nelson kernel: [ 670.769787] PGD 0
Jul 25 09:04:19 sti-nelson kernel: [ 670.769792] Oops: 0002 [#1] SMP
Jul 25 09:04:19 sti-nelson kernel: [ 670.769801] CPU 1
Jul 25 09:04:19 sti-nelson kernel: [ 670.769804] Modules linked in:
des_generic ecb md4 hmac nls_utf8 cifs fscache ip6table_filter ip6_tables
ebtable_nat ebtables powernow_k8 cpufreq_conservative cpufreq_userspa
ce cpufreq_stats mperf ipt_REJECT xt_CHECKSUM iptable_mangle xt_tcpudp
iptable_filter cpufreq_powersave ip_tables x_tables bridge stp ppdev lp
vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc fuse loop kvm_amd
kvm usbhid hid snd_hda_codec_realtek sg nouveau ttm snd_hda_intel
drm_kms_helper snd_hda_codec drm edac_core i2c_algo_bit sp5100_tco sr_mod
edac_mce_amd snd_hwdep snd_pcm ohci_hcd snd_seq snd_timer snd_seq_device
snd mxm_wmi i2c_piix4 i2c_core r8169 ata_generic k8temp ehci_hcd soundcore
usbcore mii wmi pata_atiixp cdrom snd_page_alloc video parport_pc evdev floppy
psmouse parport button processor serio_raw ext4 mbcache j
bd2 crc16 dm_mod sd_mod crc_t10dif thermal ahci libahci fan thermal_sys libata
scsi_mod
Jul 25 09:04:19 sti-nelson kernel: [ 670.769990]
Jul 25 09:04:19 sti-nelson kernel: [ 670.769994] Pid: 2738, comm: chromium
Tainted: G O 3.0.0-1-amd64 #1 Itautec S.A. Infoway/SM 3321
Jul 25 09:04:19 sti-nelson kernel: [ 670.770008] RIP:
0010:[<ffffffff81336123>] [<ffffffff81336123>] down_write+0x16/0x27
Jul 25 09:04:19 sti-nelson kernel: [ 670.770019] RSP: 0018:ffff88012a577ea8
EFLAGS: 00010296
Jul 25 09:04:19 sti-nelson kernel: [ 670.770025] RAX: 00000000000000a0 RBX:
00000000000000a0 RCX: fffffffffffffb80
Jul 25 09:04:19 sti-nelson kernel: [ 670.770032] RDX: ffffffff00000001 RSI:
0000000000000003 RDI: ffff88012a576000
Jul 25 09:04:19 sti-nelson kernel: [ 670.770039] RBP: 00000000000000a0 R08:
00007fc650822000 R09: 0000000000000000
Jul 25 09:04:19 sti-nelson kernel: [ 670.770046] R10: 00007fc6720c3c18 R11:
0000000000000213 R12: ffff88012a4bf200
Jul 25 09:04:19 sti-nelson kernel: [ 670.770054] R13: ffff88011c7d8c38 R14:
00007fc650822000 R15: ffff88011c7d8c38
Jul 25 09:04:19 sti-nelson kernel: [ 670.770061] FS: 00007fc66c85a960(0000)
GS:ffff88013fc80000(0000) knlGS:000000000b14c840
Jul 25 09:04:19 sti-nelson kernel: [ 670.770070] CS: 0010 DS: 0000 ES: 0000
CR0: 0000000080050033
Jul 25 09:04:19 sti-nelson kernel: [ 670.770075] CR2: 00000000000000a0 CR3:
0000000130f18000 CR4: 00000000000006e0
Jul 25 09:04:19 sti-nelson kernel: [ 670.770083] DR0: 0000000000000000 DR1:
0000000000000000 DR2: 0000000000000000
Jul 25 09:04:19 sti-nelson kernel: [ 670.770090] DR3: 0000000000000000 DR6:
00000000ffff0ff0 DR7: 0000000000000400
Jul 25 09:04:19 sti-nelson kernel: [ 670.770097] Process chromium (pid: 2738,
threadinfo ffff88012a576000, task ffff880130f54f60)
Jul 25 09:04:19 sti-nelson kernel: [ 670.770105] Stack:
Jul 25 09:04:19 sti-nelson kernel: [ 670.770108] 0000000000000000
ffffffff8115b236 0000000000000000 ffff88011c7d8c38
Jul 25 09:04:19 sti-nelson kernel: [ 670.770120] 00007fc6503a2000
ffffffff810d587c ffff88011c7d8c38 ffff880139d99440
Jul 25 09:04:19 sti-nelson kernel: [ 670.770132] 0000000000000000
ffffffff810d6941 ffff880139d99440 ffff880139d99448
Jul 25 09:04:19 sti-nelson kernel: [ 670.770143] Call Trace:
Jul 25 09:04:19 sti-nelson kernel: [ 670.770150] [<ffffffff8115b236>] ?
shm_close+0x26/0xa2
Jul 25 09:04:19 sti-nelson kernel: [ 670.770157] [<ffffffff810d587c>] ?
remove_vma+0x2c/0x71
Jul 25 09:04:19 sti-nelson kernel: [ 670.770164] [<ffffffff810d6941>] ?
do_munmap+0x2da/0x2f3
Jul 25 09:04:19 sti-nelson kernel: [ 670.770172] [<ffffffff8115c0ab>] ?
sys_shmdt+0x9a/0x127
Jul 25 09:04:19 sti-nelson kernel: [ 670.770182] [<ffffffff8133ba92>] ?
system_call_fastpath+0x16/0x1b
Jul 25 09:04:19 sti-nelson kernel: [ 670.770188] Code: e0 fe ff ff 48 83 ec 08
89 f2 31 f6 48 83 c4 08 e9 dd ff ff ff 53 48 89 fb e8 40 f5 ff ff 48 ba 01 00
00 00 ff ff ff ff 48 89 d8 <f0> 48 0f c1 10 48 85 d2 74 05 e8 0e 64 e7 ff 5b c3
53 48 89 fb
Jul 25 09:04:19 sti-nelson kernel: [ 670.770272] RIP [<ffffffff81336123>]
down_write+0x16/0x27
Jul 25 09:04:19 sti-nelson kernel: [ 670.770280] RSP <ffff88012a577ea8>
Jul 25 09:04:19 sti-nelson kernel: [ 670.770285] CR2: 00000000000000a0
Jul 25 09:04:19 sti-nelson kernel: [ 670.803106] ---[ end trace
386b34f32fc2281f ]---
This machine is very stable with 2.6.39-3 however.
Instructions to debug and help gather more information for this are very
welcome :-)
Thank you!
Best regards,
Nelson
-- Package-specific info:
** Version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-1) (b...@decadent.org.uk) (gcc
version 4.5.3 (Debian 4.5.3-4) ) #1 SMP Sun Jul 24 02:24:44 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64
root=UUID=c73f4307-2dce-4e31-939c-e6cb20668551 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 4.692193] hub 6-0:1.0: USB hub found
[ 4.692201] hub 6-0:1.0: 2 ports detected
[ 4.788022] usb 2-1: new low speed USB device number 2 using ohci_hcd
[ 4.833590] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.833596] nouveau 0000:01:00.0: setting latency timer to 64
[ 4.834828] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card
(0x096d80c1)
[ 4.837897] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from
PRAMIN
[ 4.901791] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 4.901795] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 4.901798] [drm] nouveau 0000:01:00.0: Bios version 62.94.64.00
[ 4.901802] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 4.901804] [drm] nouveau 0000:01:00.0: Found Display Configuration Block
version 4.0
[ 4.901808] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04011310 00000028
[ 4.901810] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[ 4.901813] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02000300 00000028
[ 4.901815] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010223f1 00c0c080
[ 4.901819] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 4.901822] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag
0x07
[ 4.901824] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag
0xff
[ 4.901827] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag
0xff
[ 4.901830] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag
0xff
[ 4.901832] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag
0xff
[ 4.901837] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset
0xD2D9
[ 4.926985] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset
0xD756
[ 4.930328] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset
0xE7A6
[ 4.930337] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset
0xE8C7
[ 4.931408] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset
0xEB44
[ 4.931413] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset
0xEBA9
[ 4.951262] [drm] nouveau 0000:01:00.0: 0xEBA9: Condition still not met
after 20ms, skipping following opcodes
[ 4.951303] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 4.951373] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
[ 4.957065] usb 2-1: New USB device found, idVendor=413c, idProduct=2003
[ 4.957069] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.957072] usb 2-1: Product: Dell USB Keyboard
[ 4.957073] usb 2-1: Manufacturer: Dell
[ 4.970023] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 4.970028] [drm] nouveau 0000:01:00.0: 3: memory 400MHz core 550MHz shader
1350MHz fanspeed 100%
[ 4.970042] [drm] nouveau 0000:01:00.0: c: memory 399MHz core 400MHz shader
800MHz
[ 4.970203] [TTM] Zone kernel: Available graphics memory: 2031438 kiB.
[ 4.970205] [TTM] Initializing pool allocator.
[ 4.970220] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[ 4.971303] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 4.980352] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 4.980355] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 4.980974] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.980976] [drm] No driver support for vblank timestamp query.
[ 5.058240] hda_codec: ALC883: BIOS auto-probing.
[ 5.072082] input: HDA ATI SB Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input2
[ 5.092028] usb 2-2: new low speed USB device number 3 using ohci_hcd
[ 5.202564] [drm] nouveau 0000:01:00.0: allocated 1440x1024 fb: 0x40000000,
bo ffff880139597000
[ 5.202634] fbcon: nouveaufb (fb0) is primary device
[ 5.259059] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 5.259062] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.259065] usb 2-2: Product: USB OPTICAL MOUSE
[ 5.259066] usb 2-2: Manufacturer: PIXART
[ 5.266950] Console: switching to colour frame buffer device 160x56
[ 5.268752] fb0: nouveaufb frame buffer device
[ 5.268754] drm: registered panic notifier
[ 5.268760] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on
minor 0
[ 5.489356] input: Dell Dell USB Keyboard as
/devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input3
[ 5.489459] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10
Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-1/input0
[ 5.494252] input: PIXART USB OPTICAL MOUSE as
/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input4
[ 5.494337] generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11
Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 5.494355] usbcore: registered new interface driver usbhid
[ 5.494356] usbhid: USB HID core driver
[ 6.202567] kvm: Nested Virtualization enabled
[ 7.849330] Adding 3929084k swap on /dev/sda3. Priority:-1 extents:1
across:3929084k
[ 7.853343] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.049739] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.212340] loop: module loaded
[ 8.705903] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 10.109291] fuse init (API version 7.16)
[ 10.323420] r8169 0000:02:00.0: eth0: link down
[ 10.323427] r8169 0000:02:00.0: eth0: link down
[ 10.323983] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.640399] Disabling lock debugging due to kernel taint
[ 10.648833] vboxdrv: Found 2 processor cores.
[ 10.649321] vboxdrv: fAsync=1 offMin=0x70ac offMax=0x70ac
[ 10.649514] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is
'normal'.
[ 10.649516] vboxdrv: Successfully loaded version 4.0.10_Debian (interface
0x00180000).
[ 12.798684] r8169 0000:02:00.0: eth0: link up
[ 12.799281] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.818504] lp0: using parport0 (interrupt-driven).
[ 16.998863] ppdev: user-space parallel port driver
[ 21.546887] Bridge firewalling registered
[ 21.712118] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.806557] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 22.530698] Ebtables v2.0 registered
[ 22.541350] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
5600+ (2 cpu cores) (version 2.20.00)
[ 22.541406] powernow-k8: fid 0x15 (2900 MHz), vid 0x7
[ 22.541408] powernow-k8: fid 0x14 (2800 MHz), vid 0x8
[ 22.541410] powernow-k8: fid 0x12 (2600 MHz), vid 0xa
[ 22.541412] powernow-k8: fid 0x10 (2400 MHz), vid 0xc
[ 22.541413] powernow-k8: fid 0xe (2200 MHz), vid 0xe
[ 22.541415] powernow-k8: fid 0xc (2000 MHz), vid 0x10
[ 22.541417] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 22.541418] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 22.637209] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 28.888299] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 29.063276] EXT4-fs (sda2): re-mounted. Opts: commit=0
** Model information
sys_vendor: Itautec S.A.
product_name: Infoway
product_version: Corp
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Itautec SM 3321 BIOS
bios_version: Itautec SM 3321 BIOS Revision 0204
board_vendor: Itautec S.A.
board_name: SM 3321
board_version: SM-3321 Padrao 04(Itautec_M)
** Loaded modules:
Module Size Used by
ip6table_filter 12540 0
ip6_tables 22263 1 ip6table_filter
ebtable_nat 12580 0
powernow_k8 17688 1
ebtables 26250 1 ebtable_nat
cpufreq_conservative 13147 0
cpufreq_userspace 12576 0
cpufreq_stats 12862 0
mperf 12453 1 powernow_k8
ipt_REJECT 12502 2
xt_CHECKSUM 12471 1
iptable_mangle 12536 1
xt_tcpudp 12570 5
iptable_filter 12536 1
cpufreq_powersave 12454 0
ip_tables 22131 2 iptable_mangle,iptable_filter
x_tables 19024 9
ip6table_filter,ip6_tables,ebtables,ipt_REJECT,xt_CHECKSUM,iptable_mangle,xt_tcpudp,iptable_filter,ip_tables
bridge 66612 0
stp 12435 1 bridge
ppdev 12763 0
lp 17270 0
vboxnetadp 13202 0
vboxnetflt 24411 0
vboxdrv 179416 2 vboxnetadp,vboxnetflt
binfmt_misc 13040 1
fuse 62334 1
loop 22711 0
kvm_amd 51180 0
kvm 268970 1 kvm_amd
usbhid 40516 0
hid 73172 1 usbhid
snd_hda_codec_realtek 278027 1
snd_hda_intel 26140 0
nouveau 512637 2
snd_hda_codec 72699 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13186 1 snd_hda_codec
snd_pcm 68104 2 snd_hda_intel,snd_hda_codec
ttm 52979 1 nouveau
snd_seq 45208 0
sp5100_tco 12900 0
drm_kms_helper 27216 1 nouveau
sg 25985 0
drm 163231 4 nouveau,ttm,drm_kms_helper
ata_generic 12479 0
sr_mod 21811 0
snd_timer 22581 2 snd_pcm,snd_seq
ohci_hcd 26576 0
i2c_piix4 12536 0
i2c_algo_bit 12850 1 nouveau
cdrom 35093 1 sr_mod
pata_atiixp 12697 0
mxm_wmi 12473 1 nouveau
edac_core 35343 0
k8temp 12531 0
edac_mce_amd 17103 0
ehci_hcd 40090 0
snd_seq_device 13137 1 snd_seq
usbcore 124242 4 usbhid,ohci_hcd,ehci_hcd
snd 52823 8
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_core 23909 5
nouveau,drm_kms_helper,drm,i2c_piix4,i2c_algo_bit
wmi 13243 1 mxm_wmi
soundcore 13152 1 snd
r8169 42411 0
mii 12675 1 r8169
parport_pc 22395 1
snd_page_alloc 13043 2 snd_hda_intel,snd_pcm
video 17707 1 nouveau
evdev 17558 7
parport 31929 3 ppdev,lp,parport_pc
floppy 53265 0
button 12930 1 nouveau
psmouse 55656 0
processor 27942 1 powernow_k8
serio_raw 12846 0
ext4 313917 2
mbcache 13066 1 ext4
jbd2 62574 1 ext4
crc16 12343 1 ext4
dm_mod 63164 0
sd_mod 36259 4
crc_t10dif 12348 1 sd_mod
thermal 17426 0
ahci 25089 3
libahci 22767 1 ahci
fan 12674 0
thermal_sys 17949 4 video,processor,thermal,fan
libata 149043 4 ata_generic,pata_atiixp,ahci,libahci
scsi_mod 162442 4 sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI
Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI
Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA
[1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0)
[1002:4387] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1)
[1002:4388] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2)
[1002:4389] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3)
[1002:438a] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4)
[1002:438b] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI)
[1002:4386] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
(rev 14)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f900 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:8349]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge
[1002:438d]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9400
GT] [10de:065b] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device [1682:236d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
Expansion ROM at fbf80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fddff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-3.0.0-1-amd64 suggests:
ii extlinux 2:4.04+dfsg-3 collection of boot loaders (ext2/3
ii grub-pc 1.99-8 GRand Unified Bootloader, version
pn linux-doc-3.0.0 <none> (no description available)
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.32 Binary firmware for various driver
ii firmware-linux-nonfree 0.32 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
* linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20110725123641.2749.2283.report...@sti-nelson.foa.unesp.br
