Your message dated Tue, 5 Jul 2011 18:32:57 +0100
with message-id <20110705173257.gj29...@decadent.org.uk>
and subject line Re: Bug#632734: linux-image-2.6.39-2-686-pae: Kernel boots but
OOPs found in syslog
has caused the Debian Bug report #632734,
regarding linux-image-2.6.39-2-686-pae: Kernel boots but OOPs found in syslog
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
632734: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632734
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.39-3
Severity: normal
Tags: sid
I tried the pae kernel again this morning after having had problems with it 3
or 4 weeks ago. It still OOP'es but at least the first time it booted and
computer operation **seems** normal.
This time there are 2 OOPS in syslog, after the second there is a reference to
recursive error fixed but re-boot required ??
-- Package-specific info:
** Version:
Linux version 2.6.39-2-686-pae (Debian 2.6.39-3) (b...@decadent.org.uk) (gcc
version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Tue Jul 5 03:48:49 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae
root=UUID=e27e5d70-6d89-407c-a7c0-078ae4a0e704 ro quiet
** Tainted: DW (640)
* Kernel has oopsed before.
* Taint on warning.
** Kernel log:
[ 5.871467] Pid: 276, comm: modprobe Tainted: G D 2.6.39-2-686-pae
#1 /D865GBF
[ 5.871654] EIP: 0060:[<c103a31e>] EFLAGS: 00010292 CPU: 1
[ 5.871712] EIP is at do_exit+0x655/0x663
[ 5.871765] EAX: 00000000 EBX: f719e460 ECX: f63071c0 EDX: 00000000
[ 5.871828] ESI: 00000012 EDI: f719e460 EBP: f70f1f7c ESP: f70f1f68
[ 5.871880] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 5.871934] Process modprobe (pid: 276, ti=f70f0000 task=f719e460
task.ti=f70f0000)
[ 5.871996] Stack:
[ 5.872016] 0000008b 00000001 f719e588 f719e458 f719e588 f70f1f7c f70f1f7c
f719e5d0
[ 5.872016] 00000000 f71bad00 f719e460 f70f0000 c103a38b 00000000 b786c258
00000000
[ 5.872016] f70f0000 c103a3bf c12b721f 00000000 b786ecd8 00000000 b786c258
00000000
[ 5.872016] Call Trace:
[ 5.872016] [<c103a38b>] ? do_group_exit+0x5f/0x82
[ 5.872016] [<c103a3bf>] ? sys_exit_group+0x11/0x14
[ 5.872016] [<c12b721f>] ? sysenter_do_call+0x12/0x28
[ 5.872016] Code: 08 83 bb 24 03 00 00 00 74 07 89 d8 e8 f1 e0 10 00 8b 83
d8 03 00 00 85 c0 74 05 e8 d8 7f 09 00 c7 03 40 00 00 00 e8 34 61 27 00 <0f> 0b
eb fe be fe ff ff ff e9 70 ff ff ff 55 57 56 64 8b 3d 84
[ 5.872016] EIP: [<c103a31e>] do_exit+0x655/0x663 SS:ESP 0068:f70f1f68
[ 5.875621] ------------[ cut here ]------------
[ 5.875684] WARNING: at
/build/buildd-linux-2.6_2.6.39-3-i386-0YkQQW/linux-2.6-2.6.39/debian/build/source_i386_none/kernel/fork.c:193
__put_task_struct+0x4a/0x99()
[ 5.875777] Hardware name:
[ 5.875828] Modules linked in: processor video button thermal_sys ext3 jbd
mbcache usb_storage uas sg sd_mod sr_mod cdrom crc_t10dif ata_generic ata_piix
uhci_hcd libata scsi_mod ehci_hcd usbcore e100 mii [last unloaded:
scsi_wait_scan]
[ 5.876856] Pid: 276, comm: modprobe Tainted: G D 2.6.39-2-686-pae
#1
[ 5.876943] Call Trace:
[ 5.877005] [<c1036b45>] ? warn_slowpath_common+0x6a/0x7b
[ 5.877066] [<c1036634>] ? __put_task_struct+0x4a/0x99
[ 5.877136] [<c1036b63>] ? warn_slowpath_null+0xd/0x10
[ 5.877206] [<c1036634>] ? __put_task_struct+0x4a/0x99
[ 5.877275] [<c1079f82>] ? __rcu_process_callbacks+0x148/0x21c
[ 5.877347] [<c103bc50>] ? irq_enter+0x49/0x49
[ 5.877408] [<c107a072>] ? rcu_process_callbacks+0x1c/0x6f
[ 5.877466] [<c103bceb>] ? __do_softirq+0x9b/0x14e
[ 5.877525] [<c103bc50>] ? irq_enter+0x49/0x49
[ 5.877589] <IRQ> [<c103bb4b>] ? irq_exit+0x2f/0x79
[ 5.877711] [<c101bc1b>] ? smp_apic_timer_interrupt+0x6b/0x75
[ 5.877779] [<c12b2711>] ? apic_timer_interrupt+0x31/0x38
[ 5.877853] [<c103007b>] ? __build_sched_domains+0xbc/0x2fc
[ 5.877917] [<c12b322f>] ? oops_end+0x57/0x99
[ 5.877972] [<c10090b3>] ? do_coprocessor_segment_overrun+0x50/0x50
[ 5.878035] [<c100911f>] ? do_invalid_op+0x6c/0x75
[ 5.878088] [<c103a31e>] ? do_exit+0x655/0x663
[ 5.878141] [<c12b09e9>] ? schedule+0x597/0x5be
[ 5.878194] [<c12b2977>] ? error_code+0x67/0x6c
[ 5.878250] [<c103a31e>] ? do_exit+0x655/0x663
[ 5.878307] [<c103a38b>] ? do_group_exit+0x5f/0x82
[ 5.878359] [<c103a3bf>] ? sys_exit_group+0x11/0x14
[ 5.878414] [<c12b721f>] ? sysenter_do_call+0x12/0x28
[ 5.878465] ---[ end trace c839e13d011ef847 ]---
[ 5.878551] ---[ end trace c839e13d011ef848 ]---
[ 5.878601] Fixing recursive fault but reboot is needed!
[ 5.890693] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.986606] Intel 82802 RNG detected
[ 6.066149] [drm] Initialized drm 1.1.0 20060810
[ 6.096442] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 6.115693] parport_pc 00:08: reported by Plug and Play ACPI
[ 6.115808] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.236158] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.258900] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.517313] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.517374] i915 0000:00:02.0: setting latency timer to 64
[ 6.538429] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.538487] [drm] Driver supports precise vblank timestamp query.
[ 6.555952] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.556486] [drm] initialized overlay support
[ 6.704287] fbcon: inteldrmfb (fb0) is primary device
[ 6.775389] Console: switching to colour frame buffer device 210x65
[ 6.788647] fb0: inteldrmfb frame buffer device
[ 6.788688] drm: registered panic notifier
[ 6.788974] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.789141] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 6.789398] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 6.935327] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input4
[ 7.216054] intel8x0_measure_ac97_clock: measured 55362 usecs (2667 samples)
[ 7.216199] intel8x0: clocking to 48000
[ 9.799389] Adding 196996k swap on /dev/sda1. Priority:-1 extents:1
across:196996k
[ 10.389091] EXT3-fs (sda2): using internal journal
[ 10.518040] loop: module loaded
[ 12.053532] EXT3-fs: barriers not enabled
[ 12.053868] kjournald starting. Commit interval 5 seconds
[ 12.054167] EXT3-fs (sda3): using internal journal
[ 12.054215] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 12.225146] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 12.305648] EXT3-fs: barriers not enabled
[ 12.315434] kjournald starting. Commit interval 5 seconds
[ 12.315914] EXT3-fs (sda5): using internal journal
[ 12.315963] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 13.096344] RPC: Registered udp transport module.
[ 13.099798] RPC: Registered tcp transport module.
[ 13.103058] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.145545] FS-Cache: Loaded
[ 13.200761] FS-Cache: Netfs 'nfs' registered for caching
[ 13.319217] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 13.813369] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.817195] e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 13.820734] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.198381] fuse init (API version 7.16)
[ 14.354105] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e
[ 14.492378] microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e
[ 14.507793] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 24.400019] eth0: no IPv6 routers present
[ 374.183877] exe (1541): /proc/1541/oom_adj is deprecated, please use
/proc/1541/oom_score_adj instead.
** Model information
not available
** Loaded modules:
Module Size Used by
microcode 13231 0
fuse 55666 1
nfsd 196206 2
nfs 219235 0
lockd 60891 2 nfsd,nfs
fscache 31438 1 nfs
auth_rpcgss 31819 2 nfsd,nfs
nfs_acl 12463 2 nfsd,nfs
sunrpc 137017 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
nls_utf8 12416 1
nls_cp437 12417 1
vfat 16989 1
fat 44149 1 vfat
lm85 17907 0
hwmon_vid 12364 1 lm85
loop 17777 0
snd_intel8x0 22287 0
snd_ac97_codec 83732 1 snd_intel8x0
i915 286502 2
ac97_bus 12462 1 snd_ac97_codec
pcspkr 12515 0
shpchp 26653 0
snd_pcm 52731 2 snd_intel8x0,snd_ac97_codec
snd_seq 39172 0
snd_timer 22171 2 snd_pcm,snd_seq
snd_seq_device 12995 1 snd_seq
psmouse 45863 0
snd 38189 6
snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
serio_raw 12758 0
parport_pc 21895 0
evdev 13084 7
i2c_i801 12670 0
drm_kms_helper 26550 1 i915
soundcore 12878 1 snd
parport 27018 1 parport_pc
snd_page_alloc 12841 2 snd_intel8x0,snd_pcm
drm 129190 3 i915,drm_kms_helper
intel_rng 12501 0
i2c_algo_bit 12706 1 i915
i2c_core 19022 6
lm85,i915,drm_kms_helper,i2c_i801,drm,i2c_algo_bit
pci_hotplug 26303 1 shpchp
rng_core 12550 1 intel_rng
processor 26983 0
video 17345 1 i915
button 12783 1 i915
thermal_sys 17667 2 video,processor
ext3 102125 3
jbd 40818 1 ext3
mbcache 12810 1 ext3
usb_storage 34951 1
uas 12975 0
sg 21385 0
sd_mod 35060 7
sr_mod 17418 0
cdrom 34631 1 sr_mod
crc_t10dif 12332 1 sd_mod
ata_generic 12439 0
ata_piix 21079 4
uhci_hcd 21850 0
libata 132100 2 ata_generic,ata_piix
scsi_mod 134453 6 usb_storage,uas,sg,sr_mod,sd_mod,libata
ehci_hcd 34885 0
usbcore 99225 5 usb_storage,uas,uhci_hcd,ehci_hcd
e100 31318 0
mii 12595 1 e100
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:0c:f1:90:91:ef brd ff:ff:ff:ff:ff:ff
inet 192.168.0.105/24 brd 192.168.0.255 scope global eth0
inet6 fe80::20c:f1ff:fe90:91ef/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1104 8 0 0 0 0 0 0 1104
8 0 0 0 0 0 0
eth0: 1126283 1795 0 0 0 0 0 0 293499
1987 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1792 total packets received
0 forwarded
0 incoming packets discarded
1791 incoming packets delivered
1948 requests sent out
16 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
103 active connections openings
0 passive connection openings
0 failed connection attempts
2 connection resets received
0 connections established
1358 segments received
1523 segments send out
1 segments retransmited
0 bad segments received.
33 resets sent
Udp:
415 packets received
0 packets to unknown port received.
0 packet receive errors
413 packets sent
UdpLite:
TcpExt:
36 TCP sockets finished time wait in fast timer
48 delayed acks sent
Quick ack mode was activated 13 times
640 packet headers predicted
296 acknowledgments not containing data payload received
10 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
1 other TCP timeouts
13 DSACKs sent for old packets
2 connections reset due to early user close
IpExt:
InMcastPkts: 24
OutMcastPkts: 17
InBcastPkts: 2
InOctets: 1103848
OutOctets: 262162
InMcastOctets: 3039
OutMcastOctets: 2867
InBcastOctets: 656
*** Device features:
eth0: 0x4000
lo: 0x201b7c65
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Interface [8086:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated
Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to
I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at cc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff800000-ff8fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller
[8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:e001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet
Controller [8086:1050] (rev 01)
Subsystem: Intel Corporation Desktop Board D865GBF [8086:302f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at bc00 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash
Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 003 Device 002: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (990, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-2-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.39-2-686-pae suggests:
ii grub-pc 1.99-8 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)
Versions of packages linux-image-2.6.39-2-686-pae is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.32 Binary firmware for various driver
ii firmware-linux-nonfree 0.32 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-2-686-pae/postinst/depmod-error-initrd-2.6.39-2-686-pae:
false
linux-image-2.6.39-2-686-pae/prerm/removing-running-kernel-2.6.39-2-686-pae:
true
linux-image-2.6.39-2-686-pae/postinst/ignoring-ramdisk:
linux-image-2.6.39-2-686-pae/postinst/missing-firmware-2.6.39-2-686-pae:
--- End Message ---
--- Begin Message ---
On Tue, Jul 05, 2011 at 11:01:28AM -0400, Frank McCormick wrote:
> On 05/07/11 10:31 AM, Ben Hutchings wrote:
> >On Tue, 2011-07-05 at 09:22 -0400, Frank McCormick wrote:
> >>Package: linux-2.6
> >>Version: 2.6.39-3
> >>Severity: normal
> >>Tags: sid
> >>
> >>I tried the pae kernel again this morning after having had problems with it
> >>3
> >>or 4 weeks ago. It still OOP'es but at least the first time it booted and
> >>computer operation **seems** normal.
> >>This time there are 2 OOPS in syslog, after the second there is a reference
> >>to
> >>recursive error fixed but re-boot required ??
> >
> >Please send the *first* oops message. This one shows a 'D' taint which
> >means there was an earlier oops:
> >
> >[...]
> >>[ 5.871467] Pid: 276, comm: modprobe Tainted: G D
> >>2.6.39-2-686-pae #1 /D865GBF
> >[...]
> >
> >Ben.
> >
>
>
> Sorry - that was the portion report bug included. I've attached
> the whole section of the log
>
> Since my first boot, the kernel will not boot anymore - sometimes
> gets as far as waiting for /dev to fill, sometimes just fills the
> screen with garbage.
[...]
Then I believe this is a hardware fault.
See diagnostic suggestions here: <http://www.bitwizard.nl/sig11/>.
Ben.
--
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
- Albert Camus
--- End Message ---
