Package: linux-2.6 Version: 2.6.32-35 Severity: normal
Hi, i am experiencing problems between Debian 6.0.2 and a Sandisk Cruzer U3 memory stick (4 GB). These sticks appear as USB hub with an emulated CD-ROM drive and a memory stick storage device. So Linux creates /dev/srN as well as /dev/sdX and /dev/sdX1 when such a stick is plugged in. But Debian 6.0.2 drops the devices a few seconds after they appear. /var/log/messages reports a normal installation of the devices, then an unrecoverable error with an SCSI command READ(10), then it resets the USB device multiple times, and finally drops the device files. If i kill the udisks demon, the devices do not vanish and i can read at ~ 900 kB/s from the /dev/sr2 device. But reading from the /dev/sdb device stalls and causes the device files to vanish after some seconds. /var/log/messages lines are similar to those with udisks enabled. The hardware is not to blame alone. I booted RIPLinuX 9.3 (slackware based) on the same machine. No problems with reading the entire memory stick. Speed is 23 MB/s. A SuSE on an older machine could read at 6 MB/s. ------------------------------------------------------------------- $ uname -a Linux debian2 2.6.32-5-amd64 #1 SMP Tue Jun 14 09:42:28 UTC 2011 x86_64 GNU/Linux $ dpkg -l | grep ^ii | grep linux-image ii linux-image-2.6-amd64 2.6.32+29 Linux 2.6 for 64-bit PCs (meta-package) ii linux-image-2.6.32-5-amd64 2.6.32-35 Linux 2.6.32 for 64-bit PCs ------------------------------------------------------------------- With udisks demon still active and trying to automount, i got: ------------------------------------------------------------------- Jun 26 09:44:22 debian2 kernel: [165443.464304] usb 1-3.2: new high speed USB device using ehci_hcd and address 27 Jun 26 09:44:22 debian2 kernel: [165443.557530] usb 1-3.2: New USB device found, idVendor=0781, idProduct=5406 Jun 26 09:44:22 debian2 kernel: [165443.557539] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 26 09:44:22 debian2 kernel: [165443.557546] usb 1-3.2: Product: U3 Cruzer Micro Jun 26 09:44:22 debian2 kernel: [165443.557551] usb 1-3.2: Manufacturer: SanDisk Jun 26 09:44:22 debian2 kernel: [165443.557555] usb 1-3.2: SerialNumber: 0164620760128686 Jun 26 09:44:22 debian2 kernel: [165443.557757] usb 1-3.2: configuration #1 chosen from 1 choice Jun 26 09:44:22 debian2 kernel: [165443.558188] scsi15 : SCSI emulation for USB Mass Storage devices Jun 26 09:44:27 debian2 kernel: [165448.557054] scsi 15:0:0:0: Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS Jun 26 09:44:27 debian2 kernel: [165448.557680] scsi 15:0:0:1: CD-ROM SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 Jun 26 09:44:27 debian2 kernel: [165448.558693] sd 15:0:0:0: Attached scsi generic sg4 type 0 Jun 26 09:44:27 debian2 kernel: [165448.561374] sd 15:0:0:0: [sdb] 7864319 512-byte logical blocks: (4.02 GB/3.74 GiB) Jun 26 09:44:27 debian2 kernel: [165448.562519] sd 15:0:0:0: [sdb] Write Protect is off Jun 26 09:44:27 debian2 kernel: [165448.563570] sr3: scsi3-mmc drive: 48x/48x tray Jun 26 09:44:27 debian2 kernel: [165448.563970] sr 15:0:0:1: Attached scsi generic sg5 type 5 Jun 26 09:44:27 debian2 kernel: [165448.565121] sdb: sdb1 Jun 26 09:44:27 debian2 kernel: [165448.567643] sd 15:0:0:0: [sdb] Attached SCSI removable disk Jun 26 09:44:57 debian2 kernel: [165478.853879] usb 1-3.2: reset high speed USB device using ehci_hcd and address 27 Jun 26 09:45:28 debian2 kernel: [165509.880686] usb 1-3.2: reset high speed USB device using ehci_hcd and address 27 Jun 26 09:45:59 debian2 kernel: [165540.365260] usb 1-3.2: reset high speed USB device using ehci_hcd and address 27 Jun 26 09:46:29 debian2 kernel: [165570.829581] usb 1-3.2: reset high speed USB device using ehci_hcd and address 27 Jun 26 09:46:50 debian2 kernel: [165591.417455] sd 15:0:0:0: Device offlined - not ready after error recovery Jun 26 09:46:50 debian2 kernel: [165591.417478] sd 15:0:0:0: [sdb] Unhandled error code Jun 26 09:46:50 debian2 kernel: [165591.417484] sd 15:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK Jun 26 09:46:50 debian2 kernel: [165591.417492] sd 15:0:0:0: [sdb] CDB: Read(10): 28 00 00 77 ff fd 00 00 01 00 Jun 26 09:46:50 debian2 kernel: [165591.417606] usb 1-3.2: USB disconnect, address 27 Jun 26 09:46:50 debian2 kernel: [165591.417989] sr 15:0:0:1: [sr3] Unhandled error code Jun 26 09:46:50 debian2 kernel: [165591.417994] sr 15:0:0:1: [sr3] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jun 26 09:46:50 debian2 kernel: [165591.418002] sr 15:0:0:1: [sr3] CDB: Read(10): 28 00 00 00 00 13 00 00 01 00 Jun 26 09:46:50 debian2 kernel: [165591.418078] sr 15:0:0:1: [sr3] Unhandled error code Jun 26 09:46:50 debian2 kernel: [165591.418083] sr 15:0:0:1: [sr3] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jun 26 09:46:50 debian2 kernel: [165591.419174] sdb: detected capacity change from 4026531328 to 0 Jun 26 09:46:50 debian2 kernel: [165591.424130] VFS: busy inodes on changed media or resized disk sr3 Jun 26 09:46:50 debian2 kernel: [165591.436906] VFS: busy inodes on changed media or resized disk sr3 Jun 26 09:46:50 debian2 kernel: [165591.443196] VFS: busy inodes on changed media or resized disk sr3 Jun 26 09:46:50 debian2 kernel: [165591.444558] VFS: busy inodes on changed media or resized disk sr3 Jun 26 09:46:50 debian2 kernel: [165591.517479] usb 1-3.2: new high speed USB device using ehci_hcd and address 28 Jun 26 09:47:20 debian2 kernel: [165621.940387] usb 1-3.2: new high speed USB device using ehci_hcd and address 29 Jun 26 09:46:50 debian2 kernel: [165591.517479] usb 1-3.2: new high speed USB device using ehci_hcd and address 28 Jun 26 09:47:20 debian2 kernel: [165621.940387] usb 1-3.2: new high speed USB device using ehci_hcd and address 29 Jun 26 09:47:51 debian2 kernel: [165652.380221] usb 1-3.2: new high speed USB device using ehci_hcd and address 30 Jun 26 09:48:01 debian2 kernel: [165662.696410] usb 1-3.2: new high speed USB device using ehci_hcd and address 31 ------------------------------------------------------------------- I found related reports about Ubuntu. On http://ubuntuforums.org/archive/index.php/t-207683.html i found the advise to do modprobe -r ehci_hcd and this seems to help somewhat indeed with the next plugging. Both /dev/sr2 and /dev/sdb become readable and do not vanish any more. But they read with ~ 900 kB/s where RIPLinuX reads with 23 MB/s. Probably related is also https://bugs.launchpad.net/ubuntu/+source/linux/+bug/726814 Have a nice day :) -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (da...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e3378181-54dc-4fe3-97e2-d7f2b6c1d296 ro quiet ** Not tainted ** Kernel log: [ 3.437876] processor LNXCPU:03: registered as cooling_device3 [ 3.637949] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 3.638689] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 3.638737] ACPI: Power Button [PWRB] [ 3.638797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 3.638816] ACPI: Power Button [PWRF] [ 3.775987] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.806134] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 3.815134] parport_pc 00:09: reported by Plug and Play ACPI [ 3.815210] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 3.914940] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.970778] EDAC MC: Ver: 2.1.0 Jun 14 2011 [ 3.980874] EDAC amd64_edac: Ver: 3.2.0 Jun 14 2011 [ 3.980994] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 3.981010] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.981011] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 3.981012] (Note that use of the override may cause unknown side effects.) [ 3.981035] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 4.326359] [drm] Initialized drm 1.1.0 20060810 [ 4.408574] [drm] radeon kernel modesetting enabled. [ 4.408697] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.410343] [drm] radeon: Initializing kernel modesetting. [ 4.410505] [drm] register mmio base: 0xFDFE0000 [ 4.410507] [drm] register mmio size: 65536 [ 4.412212] ATOM BIOS: ATI [ 4.412420] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [ 4.412430] [drm] radeon: VRAM 128M [ 4.412431] [drm] radeon: VRAM from 0xD0000000 to 0xD7FFFFFF [ 4.412432] [drm] radeon: GTT 512M [ 4.412434] [drm] radeon: GTT from 0x00000000 to 0x1FFFFFFF [ 4.412451] [drm] radeon: irq initialized. [ 4.412679] [drm] Detected VRAM RAM=128M, BAR=128M [ 4.412683] [drm] RAM width 128bits DDR [ 4.412777] [TTM] Zone kernel: Available graphics memory: 1965380 kiB. [ 4.412795] [drm] radeon: 128M of VRAM memory ready [ 4.412797] [drm] radeon: 512M of GTT memory ready. [ 4.412812] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 4.418319] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 4.418334] [drm] radeon: cp idle (0x10000C03) [ 4.418376] [drm] Loading RS690/RS740 Microcode [ 4.418378] platform radeon_cp.0: firmware: requesting radeon/RS690_cp.bin [ 4.482693] radeon_cp: Failed to load firmware "radeon/RS690_cp.bin" [ 4.482729] [drm:r100_cp_init] *ERROR* Failed to load firmware! [ 4.482763] radeon 0000:01:05.0: failled initializing CP (-2). [ 4.482795] radeon 0000:01:05.0: Disabling GPU acceleration [ 4.482828] [drm] radeon: cp finalized [ 4.483329] [drm] Radeon Display Connectors [ 4.483331] [drm] Connector 0: [ 4.483332] [drm] VGA [ 4.483334] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 4.483335] [drm] Encoders: [ 4.483337] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.483338] [drm] Connector 1: [ 4.483339] [drm] DVI-D [ 4.483341] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 4.483342] [drm] Encoders: [ 4.483343] [drm] DFP3: INTERNAL_LVTM1 [ 4.514015] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.569519] [drm] fb mappable at 0xD8040000 [ 4.569522] [drm] vram apper at 0xD8000000 [ 4.569523] [drm] size 3145728 [ 4.569525] [drm] fb depth is 24 [ 4.569526] [drm] pitch is 4096 [ 4.582097] Console: switching to colour frame buffer device 128x48 [ 4.588108] fb0: radeondrmfb frame buffer device [ 4.588109] registered panic notifier [ 4.588190] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [ 5.074504] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6 [ 5.077268] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.097014] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 7.101016] hda-intel: Codec #0 probe error; disabling it... [ 8.121021] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0000 [ 8.949333] Adding 9767480k swap on /dev/sda6. Priority:-1 extents:1 across:9767480k [ 9.093071] EXT3 FS on sda8, internal journal [ 9.185475] loop: module loaded [ 9.973623] r8169: eth0: link up [ 9.973635] r8169: eth0: link up [ 11.123610] fuse init (API version 7.13) [ 12.739070] powernow-k8: Found 1 AMD Athlon(tm) II X4 620 Processor processors (4 cpu cores) (version 2.20.00) [ 12.739119] powernow-k8: 0 : pstate 0 (2600 MHz) [ 12.739121] powernow-k8: 1 : pstate 1 (1900 MHz) [ 12.739122] powernow-k8: 2 : pstate 2 (1400 MHz) [ 12.739123] powernow-k8: 3 : pstate 3 (800 MHz) [ 15.633878] Bluetooth: Core ver 2.15 [ 15.633974] NET: Registered protocol family 31 [ 15.633975] Bluetooth: HCI device and connection manager initialized [ 15.633979] Bluetooth: HCI socket layer initialized [ 15.678960] Bluetooth: L2CAP ver 2.14 [ 15.678966] Bluetooth: L2CAP socket layer initialized [ 15.737260] Bluetooth: RFCOMM TTY layer initialized [ 15.737273] Bluetooth: RFCOMM socket layer initialized [ 15.737278] Bluetooth: RFCOMM ver 1.11 [ 15.830242] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.830248] Bluetooth: BNEP filters: protocol multicast [ 15.873568] Bridge firewalling registered [ 16.052214] Bluetooth: SCO (Voice Link) ver 0.6 [ 16.052220] Bluetooth: SCO socket layer initialized [ 16.584420] lp0: using parport0 (interrupt-driven). [ 16.614192] ppdev: user-space parallel port driver [ 20.960042] eth0: no IPv6 routers present ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: GA-MA74GM-S2H product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: FD board_vendor: Gigabyte Technology Co., Ltd. board_name: GA-MA74GM-S2H board_version: x.x ** Loaded modules: Module Size Used by ppdev 5030 0 lp 7462 0 sco 7225 2 bridge 39630 0 stp 1440 1 bridge bnep 9427 2 rfcomm 29613 0 l2cap 24736 6 bnep,rfcomm crc16 1319 1 l2cap bluetooth 41827 6 sco,bnep,rfcomm,l2cap rfkill 13044 2 bluetooth powernow_k8 10978 0 cpufreq_powersave 902 0 cpufreq_stats 2659 0 cpufreq_conservative 5162 0 cpufreq_userspace 1992 0 binfmt_misc 6431 1 fuse 50892 1 loop 11799 0 snd_hda_codec_atihdmi 2251 1 snd_hda_codec_realtek 235602 1 snd_hda_intel 20035 0 snd_hda_codec 54244 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm 60503 2 snd_hda_intel,snd_hda_codec radeon 574844 2 snd_seq 42881 0 ttm 40146 1 radeon drm_kms_helper 20369 1 radeon snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 1 snd_seq drm 142327 4 radeon,ttm,drm_kms_helper snd 46526 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device i2c_algo_bit 4225 1 radeon edac_core 29261 0 soundcore 4598 1 snd shpchp 26264 0 parport_pc 18855 1 k10temp 2715 0 i2c_piix4 8328 0 edac_mce_amd 6433 0 i2c_core 15819 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4 pci_hotplug 21203 1 shpchp snd_page_alloc 6249 2 snd_hda_intel,snd_pcm parport 27954 3 ppdev,lp,parport_pc button 4650 0 pcspkr 1699 0 evdev 7352 8 processor 29935 1 powernow_k8 ext3 106630 1 jbd 37085 1 ext3 mbcache 5050 1 ext3 usbhid 33292 0 hid 63257 1 usbhid sg 24069 0 sd_mod 29921 3 sr_mod 12602 0 crc_t10dif 1276 1 sd_mod cdrom 29415 1 sr_mod ata_generic 3239 0 ohci_hcd 19343 0 pata_atiixp 3489 0 ahci 32534 2 r8169 29279 0 mii 3210 1 r8169 ehci_hcd 32081 0 libata 133760 3 ata_generic,pata_atiixp,ahci thermal 11674 0 thermal_sys 11942 2 processor,thermal usbcore 122498 4 usbhid,ohci_hcd,ehci_hcd nls_base 6377 1 usbcore scsi_mod 126517 4 sg,sd_mod,sr_mod,libata ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # allow-hotplug eth0 #NetworkManager#iface eth0 inet dhcp auto eth0 iface eth0 inet static address 192.168.2.76 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:1d:5b:e1:82 brd ff:ff:ff:ff:ff:ff inet 192.168.2.76/24 brd 192.168.2.255 scope global eth0 inet6 fe80::224:1dff:fe5b:e182/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether f2:0a:16:cf:22:b2 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 2196820 4932 0 0 0 0 0 0 441522 4846 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 4596 total packets received 0 forwarded 0 incoming packets discarded 4596 incoming packets delivered 4486 requests sent out Icmp: 3 ICMP messages received 0 input ICMP message failed. ICMP input histogram: echo replies: 3 3 ICMP messages sent 0 ICMP messages failed ICMP output histogram: echo request: 3 IcmpMsg: InType0: 3 OutType8: 3 Tcp: 1675 active connections openings 4 passive connection openings 993 failed connection attempts 7 connection resets received 3 connections established 3601 segments received 3477 segments send out 0 segments retransmited 0 bad segments received. 21 resets sent Udp: 895 packets received 0 packets to unknown port received. 0 packet receive errors 907 packets sent UdpLite: TcpExt: 7 TCP sockets finished time wait in fast timer 1 time wait sockets recycled by time stamp 11 delayed acks sent 56 packets directly queued to recvmsg prequeue. 213 bytes directly received in process context from prequeue 1150 packet headers predicted 5 packets header predicted and directly queued to user 114 acknowledgments not containing data payload received 632 predicted acknowledgments 1658 connections reset due to unexpected data IpExt: InMcastPkts: 110 OutMcastPkts: 112 InOctets: 2114334 OutOctets: 361130 InMcastOctets: 6108 OutMcastOctets: 6576 *** Device features: eth0: 0x180 lo: 0x13865 pan0: 0xff3865 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7911] Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdffffff Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: Giga-byte Technology Device [1458:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fa00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: fdb00000-fdbfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon 2100 [1002:796e] (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d8000000 (64-bit, prefetchable) [size=128M] Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at ee00 [size=256] Region 5: Memory at fde00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 01:05.2 Audio device [0403]: ATI Technologies Inc Radeon X1200 Series Audio Controller [1002:7919] Subsystem: Giga-byte Technology Device [1458:7919] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdaff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdae0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fda00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 04d9:048e Holtek Semiconductor, Inc. Optical Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=ISO-8859-1) (ignored: LC_ALL set to en_US) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-35 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: pn firmware-linux-free <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110629100535.2436.52566.reportbug@debian2.local
