Package: linux-2.6
Version: 2.6.38-5
Severity: important
Bridge IPv6 forwarding is broken in 2.6.38:
http://www.spinics.net/lists/linux-ethernet-bridging/msg04084.html
Please apply the mentioned patch.
-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-5) (b...@decadent.org.uk) (gcc
version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 13:51:57 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64
root=UUID=acb70178-aad0-49ea-911b-727ab468e3ae ro console=tty0
console=ttyS0,115200n8 vga=0x318
** Not tainted
** Kernel log:
[ 0.920388] usbcore: registered new interface driver hub
[ 0.924076] 8139cp 0000:00:06.0: eth0: RTL-8139C+ at 0xffffc9000018e000,
52:54:00:31:ba:d8, IRQ 10
[ 0.928557] 8139cp 0000:00:06.0: setting latency timer to 64
[ 0.938644] usbcore: registered new device driver usb
[ 0.945704] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.948948] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11
(level, high) -> IRQ 11
[ 0.964284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.974606] libata version 3.00 loaded.
[ 0.979177] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.990729] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.996312] virtio-pci 0000:00:04.0: setting latency timer to 64
[ 0.996416] ata_piix 0000:00:01.1: version 2.13
[ 0.997707] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.998248] scsi0 : ata_piix
[ 1.002751] scsi1 : ata_piix
[ 1.006469] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 1.019180] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 1.021812] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 1.028147] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10
(level, high) -> IRQ 10
[ 1.031703] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 1.031795] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level,
high) -> IRQ 11
[ 1.035410] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 1.035419] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 1.048199] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus
number 1
[ 1.050884] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
[ 1.059780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.066041] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.068729] usb usb1: Product: UHCI Host Controller
[ 1.070911] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[ 1.073168] usb usb1: SerialNumber: 0000:00:01.2
[ 1.077663] hub 1-0:1.0: USB hub found
[ 1.089476] hub 1-0:1.0: 2 ports detected
[ 1.140361] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X
[ 1.140390] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X
[ 1.174360] vda: vda1 vda2 vda3
[ 1.204358] ata2.01: NODEV after polling detection
[ 1.204687] ata2.00: ATAPI: QEMU DVD-ROM, 0.14.0, max UDMA/100
[ 1.208975] ata2.00: configured for MWDMA2
[ 1.212877] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.14
PQ: 0 ANSI: 5
[ 1.259400] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X
[ 1.259422] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X
[ 1.259442] virtio-pci 0000:00:05.0: irq 44 for MSI/MSI-X
[ 1.265225] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 1.267975] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.271308] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.301067] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.404044] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 1.420038] Refined TSC clocksource calibration: 3000.210 MHz.
[ 1.664781] PM: Starting manual resume from disk
[ 1.667671] PM: Hibernation image partition 254:1 present
[ 1.667673] PM: Looking for hibernation image.
[ 1.667754] PM: Image not found (code -22)
[ 1.667756] PM: Hibernation image not present or could not be loaded.
[ 1.694561] EXT3-fs: barriers not enabled
[ 1.698024] kjournald starting. Commit interval 5 seconds
[ 1.700231] EXT3-fs (vda2): mounted filesystem with ordered data mode
[ 1.705459] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[ 1.707886] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[ 1.710404] usb 1-1: Product: QEMU USB Tablet
[ 1.712431] usb 1-1: Manufacturer: QEMU 0.14.0
[ 1.714261] usb 1-1: SerialNumber: 42
[ 1.780803] input: QEMU 0.14.0 QEMU USB Tablet as
/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input1
[ 1.784696] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01
Pointer [QEMU 0.14.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.797727] usbcore: registered new interface driver usbhid
[ 1.808034] usbhid: USB HID core driver
[ 2.623711] <30>udev[240]: starting version 167
[ 2.884574] WARNING! power/level is deprecated; use power/control instead
[ 2.989243] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.016388] <30>udev[263]: renamed network interface eth0 to eth0-eth1
[ 3.027011] <30>udev[258]: renamed network interface eth1 to eth0
[ 3.069482] <30>udev[263]: renamed network interface eth0-eth1 to eth1
[ 3.097013] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.099826] ACPI: Power Button [PWRF]
[ 3.124131] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100,
revision 0
[ 3.199304] ACPI: acpi_idle registered with cpuidle
[ 3.348054] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.526529] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
[ 3.912088] Adding 3903756k swap on /dev/vda1. Priority:-1 extents:1
across:3903756k
[ 4.277242] EXT3-fs (vda2): using internal journal
[ 4.463407] loop: module loaded
[ 5.010592] EXT3-fs: barriers not enabled
[ 5.013499] kjournald starting. Commit interval 5 seconds
[ 5.035973] EXT3-fs (vda3): using internal journal
[ 5.039915] EXT3-fs (vda3): mounted filesystem with ordered data mode
[ 6.014476] RPC: Registered udp transport module.
[ 6.014479] RPC: Registered tcp transport module.
[ 6.014480] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.060244] FS-Cache: Loaded
[ 6.104551] FS-Cache: Netfs 'nfs' registered for caching
[ 6.133309] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 6.520260] eth1: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 14.317396] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.020441] sshd (1422): /proc/1422/oom_adj is deprecated, please use
/proc/1422/oom_score_adj instead.
[ 16.880019] eth1: no IPv6 routers present
[ 17.008019] eth0: no IPv6 routers present
[353791.492041] TCP: Peer 0000:0000:0000:0000:0000:ffff:5df5:3d73:49782/80
unexpectedly shrunk window 3915748651:3915758815 (repaired)
[358707.744032] TCP: Peer 0000:0000:0000:0000:0000:ffff:5b25:4556:49460/80
unexpectedly shrunk window 3700604559:3700643117 (repaired)
[363823.812021] TCP: Peer 0000:0000:0000:0000:0000:ffff:5b25:431b:3682/80
unexpectedly shrunk window 2318787936:2318802261 (repaired)
[448598.644052] TCP: Peer 0000:0000:0000:0000:0000:ffff:4fe7:1d69:51177/80
unexpectedly shrunk window 223122994:223136062 (repaired)
[448599.172028] TCP: Peer 0000:0000:0000:0000:0000:ffff:4fe7:1d69:51177/80
unexpectedly shrunk window 223122994:223136062 (repaired)
** Model information
sys_vendor: Bochs
product_name: Bochs
product_version:
chassis_vendor: Bochs
chassis_version:
bios_vendor: Bochs
bios_version: Bochs
** Loaded modules:
Module Size Used by
xt_multiport 12518 1
iptable_filter 12536 1
ip_tables 21818 1 iptable_filter
x_tables 18839 3 xt_multiport,iptable_filter,ip_tables
nfsd 258504 2
exportfs 12591 1 nfsd
nfs 250037 0
lockd 70844 2 nfsd,nfs
fscache 36071 1 nfs
nfs_acl 12511 2 nfsd,nfs
auth_rpcgss 36692 2 nfsd,nfs
sunrpc 162075 9 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
loop 22515 0
snd_pcm 67327 0
snd_timer 22658 1 snd_pcm
snd 52280 2 snd_pcm,snd_timer
tpm_tis 13125 0
processor 27431 0
soundcore 13014 1 snd
tpm 17756 1 tpm_tis
tpm_bios 12903 1 tpm
snd_page_alloc 12969 1 snd_pcm
i2c_piix4 12536 0
evdev 17475 2
button 12994 0
psmouse 55199 0
thermal_sys 17939 1 processor
joydev 17138 0
i2c_core 23725 1 i2c_piix4
virtio_balloon 12775 0
pcspkr 12579 0
serio_raw 12878 0
usbhid 39900 0
hid 72616 1 usbhid
ext3 112218 2
jbd 41698 1 ext3
mbcache 12930 1 ext3
sg 25769 0
sr_mod 21824 0
virtio_net 17496 0
cdrom 35134 1 sr_mod
ata_generic 12479 0
virtio_blk 12775 4
uhci_hcd 26290 0
ata_piix 25319 0
8139too 26385 0
ehci_hcd 39529 0
libata 147240 2 ata_generic,ata_piix
usbcore 122908 4 usbhid,uhci_hcd,ehci_hcd
floppy 56861 0
scsi_mod 161457 3 sg,sr_mod,libata
virtio_pci 13207 0
8139cp 22417 0
virtio_ring 12793 4 virtio_balloon,virtio_net,virtio_blk,virtio_pci
nls_base 12753 1 usbcore
virtio 13093 4 virtio_balloon,virtio_net,virtio_blk,virtio_pci
mii 12634 2 8139too,8139cp
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma]
[8086:1237] (rev 02)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton
II] [8086:7000]
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE
[Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at c000 [size=16]
Kernel driver in use: ata_piix
00:01.2 USB Controller [0c03]: Intel Corporation 82371SB PIIX3 USB
[Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c020 [size=32]
Kernel driver in use: uhci_hcd
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 03)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Kernel driver in use: piix4_smbus
00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8]
(prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc Device [1af4:1100]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f2010000 [disabled] [size=64K]
00:03.0 RAM memory [0500]: Red Hat, Inc Virtio memory balloon [1af4:1002]
Subsystem: Red Hat, Inc Device [1af4:0005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c040 [size=32]
Kernel driver in use: virtio-pci
00:04.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device
[1af4:1001]
Subsystem: Red Hat, Inc Device [1af4:0002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c080 [size=64]
Region 1: Memory at f2020000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
00:05.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device
[1af4:1000]
Subsystem: Red Hat, Inc Device [1af4:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c0c0 [size=32]
Region 1: Memory at f2021000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f2030000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: virtio-pci
00:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 20)
Subsystem: Red Hat, Inc Device [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c100 [size=256]
Region 1: Memory at f2040000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f2050000 [disabled] [size=64K]
Kernel driver in use: 8139cp
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20110608095708.7727.71968.report...@dingo.innofinity.de
