Your message dated Tue, 31 May 2011 10:41:18 +0200
with message-id <20110531084118.ga2...@mraw.org>
and subject line Re: Bug#465278: linux-image-2.6.24-1-powerpc: appletouch
failure upon resume after suspend2ram
has caused the Debian Bug report #465278,
regarding linux-image-2.6.24-1-powerpc: appletouch failure upon resume after
suspend2ram
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
465278: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465278
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.24-1-powerpc
Version: 2.6.24-2
Severity: normal
Hi,
I've been experiencing troubles with the appletouch driver on my iBook
G4 (last series) after resuming from a suspend2ram. With previous kernel
versions (all of them being Debian kernels), it was at least possible to
modprobe -r and modprobe it back, getting back to a functional driver
(even if restarting X was sometimes needed to get back synaptics
features, like tapping). Now, it's no longer possible to reload the
driver:
sudo modprobe -r appletouch
| Feb 11 17:04:48 evy kernel: usbcore: deregistering interface driver appletouch
sudo modprobe appletouch
| Feb 11 17:04:52 evy kernel: drivers/input/mouse/appletouch.c: Could not do
mode read request from device (Geyser Raw mode)
| Feb 11 17:04:52 evy kernel: appletouch: probe of 1-2:1.0 failed with error -12
| Feb 11 17:04:52 evy kernel: usbcore: registered new interface driver
appletouch
Cheers,
--
Cyril Brulebois
-- Package-specific info:
** Version:
Linux version 2.6.24-1-powerpc (Debian 2.6.24-2) (wa...@debian.org) (gcc
version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 Thu Jan 31 18:52:10
CET 2008
** Command line:
root=/dev/hda4 ro ramdisk_size=8192
** Not tainted
** Kernel log:
adb: finished probe task...
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Loading R300 Microcode
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
eth0: suspending, WakeOnLan disabled
radeonfb (0000:00:10.0): suspending for event: 2...
uninorth-agp: disabling AGP on device 0000:00:10.0
uninorth-agp: disabling AGP on bridge 0000:00:0b.0
radeonfb (0000:00:10.0): resuming from state: 2...
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
PCI: Enabling device 0001:10:12.0 (0000 -> 0002)
PM: Writing back config space on device 0001:10:12.0 at offset 4 (was 0,
writing 80084000)
PM: Writing back config space on device 0001:10:12.0 at offset 3 (was 0,
writing 1000)
PM: Writing back config space on device 0001:10:12.0 at offset 1 (was 2,
writing 6)
PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
PCI: Enabling device 0001:10:1b.2 (0000 -> 0002)
PM: Writing back config space on device 0001:10:1b.2 at offset 1 (was 2100006,
writing 2100016)
eth0: resuming
PHY ID: 4061e4, addr: 0
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: MWDMA2 mode selected
adb: starting probe task...
adb devices: [2]: 2 c3 [7]: 7 1f
ADB keyboard at 2, handler 1
adb: finished probe task...
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Loading R300 Microcode
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
eth0: suspending, WakeOnLan disabled
radeonfb (0000:00:10.0): suspending for event: 2...
uninorth-agp: disabling AGP on device 0000:00:10.0
uninorth-agp: disabling AGP on bridge 0000:00:0b.0
radeonfb (0000:00:10.0): resuming from state: 2...
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
PCI: Enabling device 0001:10:12.0 (0000 -> 0002)
PM: Writing back config space on device 0001:10:12.0 at offset 4 (was 0,
writing 80084000)
PM: Writing back config space on device 0001:10:12.0 at offset 3 (was 0,
writing 1000)
PM: Writing back config space on device 0001:10:12.0 at offset 1 (was 2,
writing 6)
PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
PCI: Enabling device 0001:10:1b.2 (0000 -> 0002)
PM: Writing back config space on device 0001:10:1b.2 at offset 1 (was 2100006,
writing 2100016)
eth0: resuming
PHY ID: 4061e4, addr: 0
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: MWDMA2 mode selected
adb: starting probe task...
adb devices: [2]: 2 c3 [7]: 7 1f
ADB keyboard at 2, handler 1
adb: finished probe task...
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Loading R300 Microcode
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Loading R300 Microcode
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
usbcore: deregistering interface driver appletouch
input: appletouch disconnected
drivers/input/mouse/appletouch.c: Could not do mode read request from device
(Geyser Raw mode)
appletouch: probe of 1-2:1.0 failed with error -12
usbcore: registered new interface driver appletouch
usbcore: deregistering interface driver appletouch
drivers/input/mouse/appletouch.c: Could not do mode read request from device
(Geyser Raw mode)
appletouch: probe of 1-2:1.0 failed with error -12
usbcore: registered new interface driver appletouch
agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
[drm] Loading R300 Microcode
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input7
input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0001:10:1b.1-1
** Loaded modules:
Module Size Used by
cpufreq_powersave 1824 1
appletouch 11360 0
radeon 142440 2
drm 90584 3 radeon
tun 13376 2
nfs 294856 0
lockd 77752 1 nfs
nfs_acl 4032 1 nfs
sunrpc 213516 5 nfs,lockd,nfs_acl
ipv6 295860 16
dm_snapshot 21184 0
dm_mirror 25728 0
dm_mod 70180 2 dm_snapshot,dm_mirror
cpufreq_userspace 4760 0
cpufreq_stats 5956 0
therm_adt746x 13612 0
sr_mod 20644 0
snd_powermac 48416 0
firewire_sbp2 16492 0
scsi_mod 187764 2 sr_mod,firewire_sbp2
snd_aoa_codec_tas 15168 2
snd_aoa_fabric_layout 13864 4
joydev 13696 0
snd_aoa 21056 2 snd_aoa_codec_tas,snd_aoa_fabric_layout
arc4 1984 2
ecb 4064 2
blkcipher 8388 1 ecb
snd_aoa_i2sbus 24388 1
snd_pcm 92100 3 snd_powermac,snd_aoa_i2sbus
snd_timer 26180 2 snd_pcm
snd_page_alloc 11912 1 snd_pcm
snd 67668 13
snd_powermac,snd_aoa_codec_tas,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm,snd_timer
soundcore 8900 1 snd
snd_aoa_soundbus 7620 2 snd_aoa_fabric_layout,snd_aoa_i2sbus
b43 127328 0
rfkill 9008 1 b43
mac80211 143486 1 b43
cfg80211 16688 1 mac80211
uninorth_agp 11692 1
agpgart 40156 2 drm,uninorth_agp
input_polldev 5832 1 b43
evdev 13984 11
ext3 156328 2
jbd 56212 1 ext3
mbcache 9568 1 ext3
sungem 35268 0
sungem_phy 12928 1 sungem
firewire_ohci 22464 0
firewire_core 49912 2 firewire_sbp2,firewire_ohci
crc_itu_t 2112 1 firewire_core
ide_disk 18816 4
ehci_hcd 38892 0
usbhid 49252 0
hid 44036 1 usbhid
ff_memless 6184 1 usbhid
ide_cd 47108 0
cdrom 42812 2 sr_mod,ide_cd
ssb 40132 1 b43
pcmcia 45872 2 b43,ssb
pcmcia_core 46904 2 b43,pcmcia
firmware_class 11104 2 b43,pcmcia
i2c_powermac 5984 0
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc M11 NV
[FireGL Mobility T2e] [1002:4e56] (rev 80) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc M11 NV [FireGL Mobility T2e] [1002:4e56]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 98000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at f1000000 [disabled] [size=128K]
Capabilities: <access denied>
0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce
One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: Apple Computer Inc. Unknown device [106b:4318]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 16
Interrupt: pin A routed to IRQ 52
Region 0: Memory at 80084000 (32-bit, non-prefetchable) [size=8K]
0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac
I/O [106b:003e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB
[106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 27
0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB
[106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 28
0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB
[106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at 80083000 (32-bit, non-prefetchable) [size=4K]
0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev
04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI
[106b:0036]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 16, Cache Line Size: 32 bytes
0002:20:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid
ATA/100 [106b:003b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2
FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI])
Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC
(Sun GEM) [106b:0032] (rev 80)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.24-1-powerpc
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-powerpc depends on:
ii debconf [debconf-2.0] 1.5.17 Debian configuration management sy
ii initramfs-tools [linux-initr 0.91c tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
linux-image-2.6.24-1-powerpc recommends no packages.
-- debconf information:
linux-image-2.6.24-1-powerpc/postinst/bootloader-test-error-2.6.24-1-powerpc:
linux-image-2.6.24-1-powerpc/postinst/depmod-error-2.6.24-1-powerpc: false
linux-image-2.6.24-1-powerpc/preinst/lilo-initrd-2.6.24-1-powerpc: true
linux-image-2.6.24-1-powerpc/prerm/removing-running-kernel-2.6.24-1-powerpc:
true
linux-image-2.6.24-1-powerpc/preinst/initrd-2.6.24-1-powerpc:
linux-image-2.6.24-1-powerpc/preinst/overwriting-modules-2.6.24-1-powerpc:
true
linux-image-2.6.24-1-powerpc/postinst/old-initrd-link-2.6.24-1-powerpc: true
linux-image-2.6.24-1-powerpc/preinst/elilo-initrd-2.6.24-1-powerpc: true
linux-image-2.6.24-1-powerpc/preinst/abort-overwrite-2.6.24-1-powerpc:
linux-image-2.6.24-1-powerpc/preinst/bootloader-initrd-2.6.24-1-powerpc: true
linux-image-2.6.24-1-powerpc/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-powerpc/preinst/abort-install-2.6.24-1-powerpc:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-powerpc/preinst/failed-to-move-modules-2.6.24-1-powerpc:
linux-image-2.6.24-1-powerpc/postinst/create-kimage-link-2.6.24-1-powerpc:
true
linux-image-2.6.24-1-powerpc/postinst/old-dir-initrd-link-2.6.24-1-powerpc:
true
linux-image-2.6.24-1-powerpc/prerm/would-invalidate-boot-loader-2.6.24-1-powerpc:
true
linux-image-2.6.24-1-powerpc/postinst/old-system-map-link-2.6.24-1-powerpc:
true
linux-image-2.6.24-1-powerpc/postinst/depmod-error-initrd-2.6.24-1-powerpc:
false
linux-image-2.6.24-1-powerpc/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-powerpc/postinst/bootloader-error-2.6.24-1-powerpc:
--- End Message ---
--- Begin Message ---
Version: 2.6.39-1
Sorry for the lack of replies, the mail redirection apparently got
killed with no notice…
Cyril Brulebois <cyril.bruleb...@enst-bretagne.fr> (11/02/2008):
> I've been experiencing troubles with the appletouch driver on my
> iBook G4 (last series) after resuming from a suspend2ram. With
> previous kernel versions (all of them being Debian kernels), it was
> at least possible to modprobe -r and modprobe it back, getting back
> to a functional driver (even if restarting X was sometimes needed to
> get back synaptics features, like tapping). Now, it's no longer
> possible to reload the driver: […]
After a long while, I powered that machine on again, and it's been
working fine for weeks now (except for the xfs bugs in 2.6.39-rc*,
now fixed in 2.6.39).
Mraw,
KiBi.
signature.asc
Description: Digital signature
--- End Message ---
