Package: linux-2.6 Version: 2.6.38-5 Severity: important (reportbug script died, hope you've got everything.)
The machine runs with *HORRIBLE* clock drift (see text). Eventually, the system will slow right down, so that new processes or threads will not start. It *seems* to be related to the use of BRLTTY. See this thread: http://www.mail-archive.com/brltty@mielke.cc/msg05352.html And, yes, it's annoying having to hard-reboot the box every so often. It would seem that after some period of time, touching my display or the physical console triggers the lockup. I don't think this is a coincidence, even though on the surface there are two different problems. The kernel upgrade was sufficient to begin these issues. Cheers, Sabahattin -- Package-specific info: ** Version: Linux version 2.6.38-2-686 (Debian 2.6.38-5) (b...@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 14:49:45 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=3b61a0a8-b642-4e7c-b846-e1e9e16019cb ro bootkbd=uk quiet ** Not tainted ** Kernel log: [ 6.176964] PCI: setting IRQ 10 as level-triggered [ 6.176995] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 [ 6.177042] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 6.177175] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 6.177274] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400 [ 6.177490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.177512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.177531] usb usb1: Product: UHCI Host Controller [ 6.177547] usb usb1: Manufacturer: Linux 2.6.38-2-686 uhci_hcd [ 6.177563] usb usb1: SerialNumber: 0000:00:07.2 [ 6.178971] hub 1-0:1.0: USB hub found [ 6.179013] hub 1-0:1.0: 2 ports detected [ 6.197469] SCSI subsystem initialized [ 6.459277] libata version 3.00 loaded. [ 6.489362] pata_via 0000:00:07.1: version 0.3.4 [ 6.494117] scsi0 : pata_via [ 6.495346] scsi1 : pata_via [ 6.496281] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 6.496304] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 6.606996] firewire_core: created device fw0: GUID 00110600000069b8, S400 [ 6.660614] ata1.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133 [ 6.660636] ata1.00: 398297088 sectors, multi 16: LBA48 [ 6.676520] ata1.00: configured for UDMA/66 [ 6.677192] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y200P0 YAR4 PQ: 0 ANSI: 5 [ 6.848386] ata2.00: ATAPI: IOMEGA ZIP 100 ATAPI, 23.D, max PIO2, CDB intr [ 6.848426] ata2.01: ATAPI: COMPAQ DVD-ROM GD-2500, 0011, max MWDMA2 [ 6.864359] ata2.00: configured for PIO2 [ 6.912302] ata2.01: configured for MWDMA2 [ 6.928529] scsi 1:0:0:0: Direct-Access IOMEGA ZIP 100 23.D PQ: 0 ANSI: 5 [ 6.948929] scsi 1:0:1:0: CD-ROM COMPAQ DVD-ROM GD-2500 0011 PQ: 0 ANSI: 5 [ 7.190975] sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 7.191599] sd 0:0:0:0: [sda] Write Protect is off [ 7.191623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.191889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.204308] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 7.238294] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray [ 7.238317] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.239260] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 7.277548] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 7.277627] ata1.00: BMDMA stat 0x25 [ 7.277690] ata1.00: failed command: READ DMA [ 7.277777] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.277787] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 7.277905] ata1.00: status: { DRDY ERR } [ 7.277964] ata1.00: error: { ICRC ABRT } [ 7.278117] ata1: soft resetting link [ 7.448524] ata1.00: configured for UDMA/66 [ 7.448586] ata1: EH complete [ 7.527765] ata1.00: limiting speed to UDMA/44:PIO4 [ 7.527790] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 7.527864] ata1.00: BMDMA stat 0x25 [ 7.527927] ata1.00: failed command: READ DMA [ 7.528014] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.528024] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 7.528196] ata1.00: status: { DRDY ERR } [ 7.528258] ata1.00: error: { ICRC ABRT } [ 7.528409] ata1: soft resetting link [ 7.708508] ata1.00: configured for UDMA/44 [ 7.708553] ata1: EH complete [ 7.750848] sda: sda1 sda2 < sda5 > [ 7.753069] sda: detected capacity change from 0 to 203928109056 [ 7.755288] sda: detected capacity change from 0 to 203928109056 [ 7.756290] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.863627] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.869158] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 7.870202] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 8.257493] PM: Starting manual resume from disk [ 8.257517] PM: Hibernation image partition 8:5 present [ 8.257529] PM: Looking for hibernation image. [ 8.258247] PM: Image not found (code -22) [ 8.258262] PM: Hibernation image not present or could not be loaded. [ 8.457862] EXT3-fs (sda1): recovery required on readonly filesystem [ 8.457887] EXT3-fs (sda1): write access will be enabled during recovery [ 8.465638] EXT3-fs: barriers not enabled [ 8.703768] kjournald starting. Commit interval 5 seconds [ 8.704536] EXT3-fs (sda1): recovery complete [ 8.705806] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 10.674601] <30>udevd[206]: starting version 168 [ 11.627939] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 11.627990] ACPI: Power Button [PWRB] [ 11.628583] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 11.628613] ACPI: Power Button [PWRF] [ 11.868358] ACPI: acpi_idle registered with cpuidle [ 11.868564] Marking TSC unstable due to TSC halts in idle [ 11.895119] Switching to clocksource acpi_pm [ 11.962045] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 12.226005] parport_pc 00:0a: reported by Plug and Play ACPI [ 12.226162] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 12.244012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.595667] ACPI: resource vt596_smbus [io 0x5000-0x5007] conflicts with ACPI region SM06 [io 0x5006-0x5006] [ 12.595690] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.424147] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 15.014073] Adding 746984k swap on /dev/sda5. Priority:-1 extents:1 across:746984k [ 15.416470] EXT3-fs (sda1): using internal journal [ 15.908342] loop: module loaded [ 17.546459] fuse init (API version 7.16) [ 17.800373] r8169 0000:00:12.0: eth0: link down [ 17.800628] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.153905] r8169 0000:00:12.0: eth0: link up [ 20.154109] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ** Model information not available ** Loaded modules: Module Size Used by fuse 55640 1 loop 17805 0 firewire_sbp2 17511 0 i2c_viapro 12451 0 psmouse 45863 0 i2c_core 18989 1 i2c_viapro evdev 13084 3 shpchp 26653 0 parport_pc 21895 0 serio_raw 12758 0 pci_hotplug 26303 1 shpchp processor 26983 1 parport 27018 1 parport_pc button 12866 0 ext3 98001 1 jbd 40818 1 ext3 mbcache 12810 1 ext3 sg 21385 0 sr_mod 17418 0 sd_mod 34941 3 cdrom 34631 1 sr_mod crc_t10dif 12332 1 sd_mod ata_generic 12439 0 pata_via 12733 2 libata 131904 2 ata_generic,pata_via uhci_hcd 21850 0 ehci_hcd 34889 0 usbcore 99058 3 uhci_hcd,ehci_hcd firewire_ohci 26296 0 scsi_mod 134369 5 firewire_sbp2,sg,sr_mod,sd_mod,libata r8169 36366 0 firewire_core 42274 2 firewire_sbp2,firewire_ohci thermal 13058 0 fan 12594 0 pcspkr 12515 0 floppy 47893 0 crc_itu_t 12331 1 firewire_core mii 12562 1 r8169 thermal_sys 17667 3 processor,thermal,fan nls_base 12649 1 usbcore ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:40:f4:a9:d0:7d brd ff:ff:ff:ff:ff:ff inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0 inet6 2001:470:1f09:103e:240:f4ff:fea9:d07d/64 scope global dynamic valid_lft 3183sec preferred_lft 3183sec inet6 fe80::240:f4ff:fea9:d07d/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 11660 160 0 0 0 0 0 0 11660 160 0 0 0 0 0 0 eth0: 314981 2251 0 0 0 0 0 0 215539 1982 0 0 0 0 0 0 *** Protocol statistics: Ip: 2339 total packets received 5 with invalid addresses 0 forwarded 0 incoming packets discarded 2334 incoming packets delivered 1835 requests sent out 72 dropped because of missing route Icmp: 9 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 9 7 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 7 IcmpMsg: InType3: 9 OutType3: 7 Tcp: 10 active connections openings 0 passive connection openings 0 failed connection attempts 0 connection resets received 1 connections established 231 segments received 229 segments send out 2 segments retransmited 0 bad segments received. 4 resets sent Udp: 2086 packets received 7 packets to unknown port received. 0 packet receive errors 1712 packets sent UdpLite: TcpExt: 2 TCP sockets finished time wait in fast timer 14 delayed acks sent 7 packets directly queued to recvmsg prequeue. 6 bytes directly received in process context from prequeue 41 packet headers predicted 74 acknowledgments not containing data payload received 22 predicted acknowledgments 2 other TCP timeouts 2 DSACKs received TCPDSACKIgnoredOld: 2 IpExt: InMcastPkts: 123 OutMcastPkts: 38 InBcastPkts: 613 OutBcastPkts: 278 InOctets: 294919 OutOctets: 174018 InMcastOctets: 21445 OutMcastOctets: 4977 InBcastOctets: 86373 OutBcastOctets: 41144 *** Device features: eth0: 0x4180 lo: 0x13865 ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev 82) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 0 Region 0: Memory at dd000000 (32-bit, prefetchable) [size=4M] Capabilities: <access denied> Kernel driver in use: agpgart-via 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: d8000000-dbffffff Prefetchable memory behind bridge: 10000000-100fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C596 ISA [Mobile South] [1106:0596] (rev 12) Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge [1106:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d000 [size=16] Kernel driver in use: pata_via 00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 08) (prog-if 00 [UHCI]) Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:07.3 Host bridge [0600]: VIA Technologies, Inc. VT82C596 Power Management [1106:3050] (rev 20) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10 [OHCI]) Subsystem: VIA Technologies, Inc. Device [1106:e8e9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at dd401000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at dc00 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci 00:12.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at e000 [size=256] Region 1: Memory at dd400000 (32-bit, non-prefetchable) [size=256] Expansion ROM at dc000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage LT Pro AGP-133 [1002:4c42] (rev dc) (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Rage LT Pro AGP 2X [1002:0040] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at da000000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 10000000 [disabled] [size=128K] Capabilities: <access denied> ** Sound cards: *** /root/out.d (full from-boot dmesg) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-2-686 (Debian 2.6.38-5) (b...@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 14:49:45 UTC 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) [ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.1 present. [ 0.000000] DMI: Micronpc.com Millennia GS/694X-596B-977, BIOS 4.51 PG 10/20/99 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 0DD000000 mask FFFC00000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000fc00000 page 2M [ 0.000000] 000fc00000 - 000fff0000 page 4k [ 0.000000] kernel direct mapping tables up to fff0000 @ 17fb000-1800000 [ 0.000000] RAMDISK: 0e924000 - 0fc9c000 [ 0.000000] ACPI: RSDP 000f6bf0 00014 (v00 VIA694) [ 0.000000] ACPI: RSDT 0fff3000 00028 (v01 AWARD AWRDACPI 30302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0fff3040 00074 (v01 AWARD AWRDACPI 30302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0fff30c0 0226C (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0fff0000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fff0000 [ 0.000000] low ram: 0 - 0fff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000fff0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000fff0 [ 0.000000] On node 0 totalpages: 65407 [ 0.000000] free_area_init_node: node 0, pgdat c13ea5c0, node_mem_map cfdef200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60944 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @ce400000 s27136 r0 d22016 u4194304 [ 0.000000] pcpu-alloc: s27136 r0 d22016 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64895 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=3b61a0a8-b642-4e7c-b846-e1e9e16019cb ro bootkbd=uk quiet [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 234336k/262080k available (2646k kernel code, 27292k reserved, 1389k data, 392k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) [ 0.000000] .init : 0xc13f1000 - 0xc1453000 ( 392 kB) [ 0.000000] .data : 0xc12959e4 - 0xc13f0e80 (1389 kB) [ 0.000000] .text : 0xc1000000 - 0xc12959e4 (2646 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] CPU 0 irqstacks, hard=ce01a000 soft=ce01c000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 400.929 MHz processor. [ 0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 801.85 BogoMIPS (lpj=1603716) [ 0.008043] pid_max: default: 32768 minimum: 301 [ 0.012417] Security Framework initialized [ 0.012453] SELinux: Disabled at boot. [ 0.012746] Mount-cache hash table entries: 512 [ 0.014973] Initializing cgroup subsys ns [ 0.014994] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.015014] Initializing cgroup subsys cpuacct [ 0.015214] Initializing cgroup subsys devices [ 0.015230] Initializing cgroup subsys freezer [ 0.015246] Initializing cgroup subsys net_cls [ 0.015261] Initializing cgroup subsys blkio [ 0.015569] mce: CPU supports 5 MCE banks [ 0.015829] SMP alternatives: switching to UP code [ 0.030218] Freeing SMP alternatives: 16k freed [ 0.030277] ACPI: Core revision 20110112 [ 0.036535] ACPI: setting ELCR to 0200 (from 0e20) [ 0.040299] weird, boot CPU (#0) not listed by the BIOS. [ 0.040313] SMP motherboard not detected. [ 0.040328] Local APIC not detected. Using dummy APIC emulation. [ 0.040340] SMP disabled [ 0.040353] Performance Events: [ 0.040367] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.040380] no hardware sampling interrupt available. [ 0.040395] p6 PMU driver. [ 0.040426] ... version: 0 [ 0.040438] ... bit width: 32 [ 0.040450] ... generic registers: 2 [ 0.040462] ... value mask: 00000000ffffffff [ 0.040476] ... max period: 000000007fffffff [ 0.040489] ... fixed-purpose events: 0 [ 0.040501] ... event mask: 0000000000000003 [ 0.042344] NMI watchdog disabled (cpu0): not supported (no LAPIC?) [ 0.042366] Brought up 1 CPUs [ 0.042383] Total of 1 processors activated (801.85 BogoMIPS). [ 0.043537] devtmpfs: initialized [ 0.046675] print_constraints: dummy: [ 0.047282] NET: Registered protocol family 16 [ 0.047962] ACPI: bus type pci registered [ 0.080585] PCI: PCI BIOS revision 2.10 entry at 0xfb280, last bus=1 [ 0.080602] PCI: Using configuration type 1 for base access [ 0.084263] bio: create slab <bio-0> at 0 [ 0.087279] ACPI: EC: Look up EC in DSDT [ 0.095355] ACPI: Interpreter enabled [ 0.095385] ACPI: (supports S0 S1 S5) [ 0.095490] ACPI: Using PIC for interrupt routing [ 0.111019] ACPI: No dock devices found. [ 0.111036] HEST: Table not found. [ 0.111060] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.111671] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.113006] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.113030] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored) [ 0.113052] pci_root PNP0A03:00: host bridge window [io 0x4100-0x4fff] (ignored) [ 0.113073] pci_root PNP0A03:00: host bridge window [io 0x5010-0xffff] (ignored) [ 0.113094] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000cffff] (ignored) [ 0.113115] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffefffff] (ignored) [ 0.113178] pci 0000:00:00.0: [1106:0691] type 0 class 0x000600 [ 0.113217] pci 0000:00:00.0: reg 10: [mem 0xdd000000-0xdd3fffff pref] [ 0.113346] pci 0000:00:01.0: [1106:8598] type 1 class 0x000604 [ 0.113474] pci 0000:00:07.0: [1106:0596] type 0 class 0x000601 [ 0.113615] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101 [ 0.113694] pci 0000:00:07.1: reg 20: [io 0xd000-0xd00f] [ 0.113780] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03 [ 0.113858] pci 0000:00:07.2: reg 20: [io 0xd400-0xd41f] [ 0.113942] pci 0000:00:07.3: [1106:3050] type 0 class 0x000600 [ 0.114091] pci 0000:00:10.0: [1106:3044] type 0 class 0x000c00 [ 0.114135] pci 0000:00:10.0: reg 10: [mem 0xdd401000-0xdd4017ff] [ 0.114166] pci 0000:00:10.0: reg 14: [io 0xdc00-0xdc7f] [ 0.114265] pci 0000:00:10.0: supports D2 [ 0.114283] pci 0000:00:10.0: PME# supported from D2 D3hot D3cold [ 0.114304] pci 0000:00:10.0: PME# disabled [ 0.114364] pci 0000:00:12.0: [10ec:8169] type 0 class 0x000200 [ 0.114406] pci 0000:00:12.0: reg 10: [io 0xe000-0xe0ff] [ 0.114437] pci 0000:00:12.0: reg 14: [mem 0xdd400000-0xdd4000ff] [ 0.114509] pci 0000:00:12.0: reg 30: [mem 0xdc000000-0xdc01ffff pref] [ 0.114552] pci 0000:00:12.0: supports D1 D2 [ 0.114570] pci 0000:00:12.0: PME# supported from D1 D2 D3hot D3cold [ 0.114589] pci 0000:00:12.0: PME# disabled [ 0.114720] pci 0000:01:00.0: [1002:4c42] type 0 class 0x000300 [ 0.114766] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xd8ffffff] [ 0.114796] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff] [ 0.114827] pci 0000:01:00.0: reg 18: [mem 0xda000000-0xda000fff] [ 0.114888] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.114941] pci 0000:01:00.0: supports D1 D2 [ 0.115023] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.115045] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.115067] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff] [ 0.115090] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.115122] pci_bus 0000:00: on NUMA node 0 [ 0.115148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.121611] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.122532] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.123553] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.124673] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.125599] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.125619] vgaarb: loaded [ 0.125872] PCI: Using ACPI for IRQ routing [ 0.125895] PCI: pci_cache_line_size set to 32 bytes [ 0.126022] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.126040] reserve RAM buffer: 000000000fff0000 - 000000000fffffff [ 0.126915] Switching to clocksource pit [ 0.132580] pnp: PnP ACPI init [ 0.132725] ACPI: bus type pnp registered [ 0.134052] pnp 00:00: [mem 0x000d0000-0x000d1fff] [ 0.134074] pnp 00:00: [mem 0x000f0000-0x000f7fff] [ 0.134093] pnp 00:00: [mem 0x000f8000-0x000fbfff] [ 0.134112] pnp 00:00: [mem 0x000fc000-0x000fffff] [ 0.134130] pnp 00:00: [mem 0x0fff0000-0x0fffffff] [ 0.134148] pnp 00:00: [mem 0xffff0000-0xffffffff] [ 0.134166] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.134184] pnp 00:00: [mem 0x00100000-0x0ffeffff] [ 0.134506] system 00:00: [mem 0x000d0000-0x000d1fff] has been reserved [ 0.134532] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.134555] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.134578] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.134601] system 00:00: [mem 0x0fff0000-0x0fffffff] could not be reserved [ 0.134624] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved [ 0.134647] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.134670] system 00:00: [mem 0x00100000-0x0ffeffff] could not be reserved [ 0.134698] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.135336] pnp 00:01: [bus 00-ff] [ 0.135358] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.135378] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.135397] pnp 00:01: [io 0x0d00-0x3fff window] [ 0.135415] pnp 00:01: [io 0x4000-0x407f] [ 0.135432] pnp 00:01: [io 0x4080-0x40ff] [ 0.135450] pnp 00:01: [io 0x4100-0x4fff window] [ 0.135468] pnp 00:01: [io 0x5000-0x500f] [ 0.135486] pnp 00:01: [io 0x5010-0xffff window] [ 0.135506] pnp 00:01: [mem 0x000a0000-0x000cffff window] [ 0.135526] pnp 00:01: [mem 0x10000000-0xffefffff window] [ 0.135786] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.136578] pnp 00:02: [io 0x0010-0x001f] [ 0.136598] pnp 00:02: [io 0x0022-0x003f] [ 0.136616] pnp 00:02: [io 0x0044-0x005f] [ 0.136633] pnp 00:02: [io 0x0062-0x0063] [ 0.136650] pnp 00:02: [io 0x0065-0x006f] [ 0.136667] pnp 00:02: [io 0x0074-0x007f] [ 0.136685] pnp 00:02: [io 0x0091-0x0093] [ 0.136702] pnp 00:02: [io 0x00a2-0x00bf] [ 0.136719] pnp 00:02: [io 0x00e0-0x00ef] [ 0.136737] pnp 00:02: [io 0x03f0-0x03f1] [ 0.136754] pnp 00:02: [io 0x04d0-0x04d1] [ 0.137114] system 00:02: [io 0x03f0-0x03f1] has been reserved [ 0.137139] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.137165] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.137264] pnp 00:03: [dma 4] [ 0.137283] pnp 00:03: [io 0x0000-0x000f] [ 0.137300] pnp 00:03: [io 0x0080-0x0090] [ 0.137318] pnp 00:03: [io 0x0094-0x009f] [ 0.137335] pnp 00:03: [io 0x00c0-0x00df] [ 0.137557] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.137651] pnp 00:04: [io 0x0070-0x0073] [ 0.137676] pnp 00:04: [irq 8] [ 0.137929] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.138010] pnp 00:05: [io 0x0061] [ 0.138237] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.138319] pnp 00:06: [io 0x00f0-0x00ff] [ 0.138340] pnp 00:06: [irq 13] [ 0.138568] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.139290] pnp 00:07: [io 0x03f2-0x03f5] [ 0.139310] pnp 00:07: [io 0x03f7] [ 0.139329] pnp 00:07: [irq 6] [ 0.139347] pnp 00:07: [dma 2] [ 0.139710] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.140735] pnp 00:08: [io 0x03f8-0x03ff] [ 0.140756] pnp 00:08: [irq 4] [ 0.141218] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.142243] pnp 00:09: [io 0x02f8-0x02ff] [ 0.142264] pnp 00:09: [irq 3] [ 0.142639] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.144776] pnp 00:0a: [io 0x0378-0x037f] [ 0.144796] pnp 00:0a: [io 0x0778-0x077b] [ 0.144816] pnp 00:0a: [irq 7] [ 0.144832] pnp 00:0a: [dma 3] [ 0.145318] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.145545] pnp 00:0b: [irq 12] [ 0.145780] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.145979] pnp 00:0c: [io 0x0060] [ 0.145997] pnp 00:0c: [io 0x0064] [ 0.146016] pnp 00:0c: [irq 1] [ 0.146257] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.146321] pnp: PnP ACPI: found 13 devices [ 0.146335] ACPI: ACPI bus type pnp unregistered [ 0.146358] PnPBIOS: Disabled by ACPI PNP [ 0.199199] Switching to clocksource acpi_pm [ 0.199374] pci 0000:00:01.0: BAR 15: assigned [mem 0x10000000-0x100fffff pref] [ 0.199403] pci 0000:01:00.0: BAR 6: assigned [mem 0x10000000-0x1001ffff pref] [ 0.199425] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.199445] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.199470] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff] [ 0.199492] pci 0000:00:01.0: bridge window [mem 0x10000000-0x100fffff pref] [ 0.199539] pci 0000:00:01.0: setting latency timer to 64 [ 0.199563] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.199582] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.199603] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.199622] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xdbffffff] [ 0.199643] pci_bus 0000:01: resource 2 [mem 0x10000000-0x100fffff pref] [ 0.200101] NET: Registered protocol family 2 [ 0.200693] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.201094] Switched to NOHz mode on CPU #0 [ 0.202362] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.202779] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.203145] TCP: Hash tables configured (established 8192 bind 8192) [ 0.203161] TCP reno registered [ 0.203181] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.203252] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.204753] NET: Registered protocol family 1 [ 0.204845] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.204876] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 0.204955] pci 0000:01:00.0: Boot video device [ 0.204974] PCI: CLS 32 bytes, default 32 [ 0.205285] Unpacking initramfs... [ 3.956894] Freeing initrd memory: 19936k freed [ 4.065609] audit: initializing netlink socket (disabled) [ 4.065683] type=2000 audit(1305145501.063:1): initialized [ 4.131964] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 4.146756] VFS: Disk quotas dquot_6.5.2 [ 4.147717] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 4.148820] msgmni has been set to 496 [ 4.150391] alg: No test for stdrng (krng) [ 4.150877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.150900] io scheduler noop registered [ 4.150913] io scheduler deadline registered [ 4.151059] io scheduler cfq registered (default) [ 4.152518] ERST: Table is not found! [ 4.152638] isapnp: Scanning for PnP cards... [ 4.507275] isapnp: No Plug & Play device found [ 4.507747] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.528467] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.549253] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 4.571396] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.592429] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 4.593588] Linux agpgart interface v0.103 [ 4.594360] agpgart: Detected VIA Apollo Pro 133 chipset [ 4.597500] agpgart-via 0000:00:00.0: AGP aperture is 4M @ 0xdd000000 [ 4.598179] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.601925] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.601970] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.602984] mousedev: PS/2 mouse device common for all mice [ 4.603264] rtc_cmos 00:04: RTC can wake from S4 [ 4.603592] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 4.603659] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 4.603736] cpuidle: using governor ladder [ 4.603751] cpuidle: using governor menu [ 4.605681] TCP cubic registered [ 4.607376] NET: Registered protocol family 10 [ 4.612649] Mobile IPv6 [ 4.612669] NET: Registered protocol family 17 [ 4.612710] Registering the dns_resolver key type [ 4.612804] Using IPI No-Shortcut mode [ 4.613544] PM: Hibernation image not present or could not be loaded. [ 4.613615] registered taskstats version 1 [ 4.614239] rtc_cmos 00:04: setting system clock to 2011-05-11 20:25:02 UTC (1305145502) [ 4.614380] Initalizing network drop monitor service [ 4.614817] Freeing unused kernel memory: 392k freed [ 4.616800] Write protecting the kernel text: 2648k [ 4.616935] Write protecting the kernel read-only data: 1000k [ 4.626554] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.709986] <30>udevd[44]: starting version 168 [ 5.124201] Refined TSC clocksource calibration: 400.908 MHz. [ 5.124226] Switching to clocksource tsc [ 5.359201] Floppy drive(s): fd0 is 1.44M [ 5.376541] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 5.378005] ACPI: Fan [FAN] (on) [ 5.396527] FDC 0 is a post-1991 82077 [ 5.588971] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.588992] ACPI: Thermal Zone [THRM] (0 C) [ 5.680521] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.682130] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 5.682150] PCI: setting IRQ 5 as level-triggered [ 5.682180] r8169 0000:00:12.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 5.682264] r8169 0000:00:12.0: (unregistered net_device): no PCI Express capability [ 5.720021] r8169 0000:00:12.0: eth0: RTL8110s at 0xd0806000, 00:40:f4:a9:d0:7d, XID 04000000 IRQ 5 [ 5.982791] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 5.982813] PCI: setting IRQ 11 as level-triggered [ 5.982845] firewire_ohci 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 6.104473] firewire_ohci: Added fw-ohci device 0000:00:10.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x11 [ 6.106469] usbcore: registered new interface driver usbfs [ 6.106614] usbcore: registered new interface driver hub [ 6.106886] usbcore: registered new device driver usb [ 6.147065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.174686] uhci_hcd: USB Universal Host Controller Interface driver [ 6.176944] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [ 6.176964] PCI: setting IRQ 10 as level-triggered [ 6.176995] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 [ 6.177042] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 6.177175] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 6.177274] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400 [ 6.177490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.177512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.177531] usb usb1: Product: UHCI Host Controller [ 6.177547] usb usb1: Manufacturer: Linux 2.6.38-2-686 uhci_hcd [ 6.177563] usb usb1: SerialNumber: 0000:00:07.2 [ 6.178971] hub 1-0:1.0: USB hub found [ 6.179013] hub 1-0:1.0: 2 ports detected [ 6.197469] SCSI subsystem initialized [ 6.459277] libata version 3.00 loaded. [ 6.489362] pata_via 0000:00:07.1: version 0.3.4 [ 6.494117] scsi0 : pata_via [ 6.495346] scsi1 : pata_via [ 6.496281] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 6.496304] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 6.606996] firewire_core: created device fw0: GUID 00110600000069b8, S400 [ 6.660614] ata1.00: ATA-7: Maxtor 6Y200P0, YAR41BW0, max UDMA/133 [ 6.660636] ata1.00: 398297088 sectors, multi 16: LBA48 [ 6.676520] ata1.00: configured for UDMA/66 [ 6.677192] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y200P0 YAR4 PQ: 0 ANSI: 5 [ 6.848386] ata2.00: ATAPI: IOMEGA ZIP 100 ATAPI, 23.D, max PIO2, CDB intr [ 6.848426] ata2.01: ATAPI: COMPAQ DVD-ROM GD-2500, 0011, max MWDMA2 [ 6.864359] ata2.00: configured for PIO2 [ 6.912302] ata2.01: configured for MWDMA2 [ 6.928529] scsi 1:0:0:0: Direct-Access IOMEGA ZIP 100 23.D PQ: 0 ANSI: 5 [ 6.948929] scsi 1:0:1:0: CD-ROM COMPAQ DVD-ROM GD-2500 0011 PQ: 0 ANSI: 5 [ 7.190975] sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 7.191599] sd 0:0:0:0: [sda] Write Protect is off [ 7.191623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.191889] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.204308] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 7.238294] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray [ 7.238317] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.239260] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 7.277548] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 7.277627] ata1.00: BMDMA stat 0x25 [ 7.277690] ata1.00: failed command: READ DMA [ 7.277777] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.277787] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 7.277905] ata1.00: status: { DRDY ERR } [ 7.277964] ata1.00: error: { ICRC ABRT } [ 7.278117] ata1: soft resetting link [ 7.448524] ata1.00: configured for UDMA/66 [ 7.448586] ata1: EH complete [ 7.527765] ata1.00: limiting speed to UDMA/44:PIO4 [ 7.527790] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 7.527864] ata1.00: BMDMA stat 0x25 [ 7.527927] ata1.00: failed command: READ DMA [ 7.528014] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 7.528024] res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 7.528196] ata1.00: status: { DRDY ERR } [ 7.528258] ata1.00: error: { ICRC ABRT } [ 7.528409] ata1: soft resetting link [ 7.708508] ata1.00: configured for UDMA/44 [ 7.708553] ata1: EH complete [ 7.750848] sda: sda1 sda2 < sda5 > [ 7.753069] sda: detected capacity change from 0 to 203928109056 [ 7.755288] sda: detected capacity change from 0 to 203928109056 [ 7.756290] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.863627] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.869158] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 7.870202] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 8.257493] PM: Starting manual resume from disk [ 8.257517] PM: Hibernation image partition 8:5 present [ 8.257529] PM: Looking for hibernation image. [ 8.258247] PM: Image not found (code -22) [ 8.258262] PM: Hibernation image not present or could not be loaded. [ 8.457862] EXT3-fs (sda1): recovery required on readonly filesystem [ 8.457887] EXT3-fs (sda1): write access will be enabled during recovery [ 8.465638] EXT3-fs: barriers not enabled [ 8.703768] kjournald starting. Commit interval 5 seconds [ 8.704536] EXT3-fs (sda1): recovery complete [ 8.705806] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 10.674601] <30>udevd[206]: starting version 168 [ 11.627939] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 11.627990] ACPI: Power Button [PWRB] [ 11.628583] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 11.628613] ACPI: Power Button [PWRF] [ 11.868358] ACPI: acpi_idle registered with cpuidle [ 11.868564] Marking TSC unstable due to TSC halts in idle [ 11.895119] Switching to clocksource acpi_pm [ 11.962045] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 12.226005] parport_pc 00:0a: reported by Plug and Play ACPI [ 12.226162] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 12.244012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.595667] ACPI: resource vt596_smbus [io 0x5000-0x5007] conflicts with ACPI region SM06 [io 0x5006-0x5006] [ 12.595690] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.424147] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 15.014073] Adding 746984k swap on /dev/sda5. Priority:-1 extents:1 across:746984k [ 15.416470] EXT3-fs (sda1): using internal journal [ 15.908342] loop: module loaded [ 17.546459] fuse init (API version 7.16) [ 17.800373] r8169 0000:00:12.0: eth0: link down [ 17.800628] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.153905] r8169 0000:00:12.0: eth0: link up [ 20.154109] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready *** /root/ntp.d (openntpd syslog exerpt) May 11 17:00:28 Bloodstone ntpd[905]: adjusting local clock by -486.630147s May 11 17:04:44 Bloodstone ntpd[905]: adjusting local clock by -486.448775s May 11 17:08:56 Bloodstone ntpd[905]: adjusting local clock by -486.311607s May 11 17:13:15 Bloodstone ntpd[905]: adjusting local clock by -486.177790s May 11 17:17:34 Bloodstone ntpd[905]: adjusting local clock by -486.023306s May 11 17:21:43 Bloodstone ntpd[905]: adjusting local clock by -485.904187s May 11 17:26:03 Bloodstone ntpd[905]: adjusting local clock by -485.791888s May 11 17:30:22 Bloodstone ntpd[905]: adjusting local clock by -485.593061s May 11 17:34:31 Bloodstone ntpd[905]: adjusting local clock by -485.464050s May 11 17:38:48 Bloodstone ntpd[905]: adjusting local clock by -485.313699s May 11 17:43:03 Bloodstone ntpd[905]: adjusting local clock by -485.169494s May 11 17:47:23 Bloodstone ntpd[905]: adjusting local clock by -485.026972s May 11 17:51:45 Bloodstone ntpd[905]: adjusting local clock by -484.836308s May 11 17:55:59 Bloodstone ntpd[905]: adjusting local clock by -484.717923s May 11 18:00:17 Bloodstone ntpd[905]: adjusting local clock by -484.574000s May 11 18:04:33 Bloodstone ntpd[905]: adjusting local clock by -484.431088s May 11 18:08:53 Bloodstone ntpd[905]: adjusting local clock by -484.252213s May 11 18:13:08 Bloodstone ntpd[905]: adjusting local clock by -484.114810s May 11 18:17:22 Bloodstone ntpd[905]: adjusting local clock by -483.975247s May 11 18:21:38 Bloodstone ntpd[905]: adjusting local clock by -483.819964s May 11 18:25:53 Bloodstone ntpd[905]: adjusting local clock by -483.694611s May 11 18:30:15 Bloodstone ntpd[905]: adjusting local clock by -483.558994s May 11 18:34:36 Bloodstone ntpd[905]: adjusting local clock by -483.382167s May 11 18:38:53 Bloodstone ntpd[905]: adjusting local clock by -483.212199s May 11 18:43:07 Bloodstone ntpd[905]: adjusting local clock by -483.090977s May 11 18:47:30 Bloodstone ntpd[905]: adjusting local clock by -482.934892s May 11 18:51:45 Bloodstone ntpd[905]: adjusting local clock by -482.831925s May 11 18:56:01 Bloodstone ntpd[905]: adjusting local clock by -482.645244s May 11 19:00:56 Bloodstone ntpd[905]: adjusting local clock by -482.457096s May 11 19:05:25 Bloodstone ntpd[905]: adjusting local clock by -482.370842s May 11 19:09:36 Bloodstone ntpd[905]: adjusting local clock by -482.161926s May 11 19:13:55 Bloodstone ntpd[905]: adjusting local clock by -482.033929s May 11 19:18:14 Bloodstone ntpd[905]: adjusting local clock by -481.907495s May 11 19:22:29 Bloodstone ntpd[905]: adjusting local clock by -481.727503s May 11 19:26:46 Bloodstone ntpd[905]: adjusting local clock by -481.573618s May 11 19:30:57 Bloodstone ntpd[905]: adjusting local clock by -481.436625s May 11 19:35:15 Bloodstone ntpd[905]: adjusting local clock by -485.958508s May 11 19:39:38 Bloodstone ntpd[905]: adjusting local clock by -485.856427s May 11 19:43:57 Bloodstone ntpd[905]: adjusting local clock by -485.701451s May 11 19:48:14 Bloodstone ntpd[905]: adjusting local clock by -485.565794s May 11 19:52:32 Bloodstone ntpd[905]: adjusting local clock by -485.394002s May 11 19:56:51 Bloodstone ntpd[905]: adjusting local clock by -485.284827s May 11 20:01:02 Bloodstone ntpd[905]: adjusting local clock by -485.125139s May 11 20:05:21 Bloodstone ntpd[905]: adjusting local clock by -484.943882s May 11 20:09:40 Bloodstone ntpd[905]: adjusting local clock by -484.796325s May 11 20:14:00 Bloodstone ntpd[905]: adjusting local clock by -484.670089s May 11 20:18:22 Bloodstone ntpd[905]: adjusting local clock by -484.514918s May 11 20:22:44 Bloodstone ntpd[905]: adjusting local clock by -484.345916s May 11 20:27:00 Bloodstone ntpd[905]: adjusting local clock by -484.230885s May 11 20:31:12 Bloodstone ntpd[905]: adjusting local clock by -484.075650s May 11 20:35:29 Bloodstone ntpd[905]: adjusting local clock by -483.908911s May 11 21:04:49 Bloodstone ntpd[906]: adjusting local clock by -490.346277s May 11 21:09:03 Bloodstone ntpd[906]: adjusting local clock by -490.208271s May 11 21:13:48 Bloodstone ntpd[906]: adjusting local clock by -490.086586s May 11 21:18:09 Bloodstone ntpd[906]: adjusting local clock by -489.988770s May 11 21:36:52 Bloodstone ntpd[904]: adjusting local clock by -490.406057s May 11 21:45:45 Bloodstone ntpd[904]: adjusting local clock by -490.152395s May 11 21:50:05 Bloodstone ntpd[904]: adjusting local clock by -490.016600s May 11 21:54:03 Bloodstone ntpd[904]: adjusting local clock by -489.910416s May 11 21:58:23 Bloodstone ntpd[904]: adjusting local clock by -489.755375s May 11 22:02:41 Bloodstone ntpd[904]: adjusting local clock by -489.630706s May 11 22:07:00 Bloodstone ntpd[904]: adjusting local clock by -489.458891s -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.38-2-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.38-2-686 depends on: ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-2-686 recommends: ii firmware-linux-free 3 Binary firmware for various driver ii libc6-i686 2.13-2 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.38-2-686 suggests: ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version ii linux-doc-2.6.38 2.6.38-5 Linux kernel specific documentatio Versions of packages linux-image-2.6.38-2-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.29 Binary firmware for various driver ii firmware-linux-nonfree 0.29 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686: linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true * linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110511215513.1166.32767.reportbug@Bloodstone.local
