Hi Vagrant, On Sat, Apr 16, 2011 at 10:11:38PM -0700, Vagrant Cascadian wrote: > ok, one last patch trimmed even more from the last, tested to work on the > efikamx smarttop with ethernet, mmc and serial console.
I have been working in parallel on another config, but have not yet tested. I got some symbols that could be discussed and promoted to generic ARM config or even to main config, some of them are commented out. Vagrant could you cross check your config.mx5 with mine (which it is in the state of Work-In-Progress), you got symbols selected which are already present on the top level config or selected by other symbols. Thanks and best regards, -- Hector Oron P.S.- config: (it is mainly a copy of armel one) ## ## file: arch/arm/Kconfig ## ## choice: ARM system type # CONFIG_ARCH_REALVIEW is not set ## end choice CONFIG_AEABI=y CONFIG_OABI_COMPAT=y ## ## file: arch/arm/Kconfig.debug ## CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y ## ## file: drivers/input/misc/Kconfig ## CONFIG_INPUT_MISC=y CONFIG_INPUT_UINPUT=m ## ## file: drivers/input/mouse/Kconfig ## CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_APPLETOUCH=m ## ## file: drivers/net/hamradio/Kconfig ## CONFIG_BPQETHER=m CONFIG_BAYCOM_SER_FDX=m CONFIG_BAYCOM_SER_HDX=m CONFIG_BAYCOM_PAR=m CONFIG_BAYCOM_EPP=m CONFIG_YAM=m ## ## file: drivers/net/wireless/ipw2x00/Kconfig ## # CONFIG_IPW2100 is not set ## ## file: drivers/parport/Kconfig ## #. Causes lockups on ARM (see #588164) # CONFIG_PARPORT_PC is not set ## ## file: drivers/scsi/Kconfig ## # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_HPTIOP is not set ## ## file: drivers/scsi/aic7xxx/Kconfig.aic79xx ## # CONFIG_SCSI_AIC79XX is not set ## ## file: drivers/scsi/aic7xxx/Kconfig.aic7xxx ## # CONFIG_SCSI_AIC7XXX is not set ## ## file: drivers/scsi/aic94xx/Kconfig ## # CONFIG_SCSI_AIC94XX is not set ## ## file: drivers/scsi/megaraid/Kconfig.megaraid ## # CONFIG_MEGARAID_SAS is not set ## ## file: drivers/scsi/qla2xxx/Kconfig ## # CONFIG_SCSI_QLA_FC is not set ## ## file: drivers/scsi/qla4xxx/Kconfig ## # CONFIG_SCSI_QLA_ISCSI is not set ## ## file: init/Kconfig ## ## choice: Kernel compression mode # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y ## end choice ## ## file: net/econet/Kconfig ## CONFIG_ECONET_AUNUDP=y CONFIG_ECONET_NATIVE=y ================================================ config.mx5: ## ## file: arch/arm/Kconfig ## ## choice: ARM system type # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set CONFIG_ARCH_MXC=y # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set ## end choice #. These are not yet selected symbols. #. CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y #. CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y #. CONFIG_IMX_HAVE_PLATFORM_IMX_SSI=y #. CONFIG_IMX_HAVE_PLATFORM_MXC_PWM=y ## ## file: "arch/arm/plat-mxc/Kconfig" ## CONFIG_ARCH_MX5=y ## ## file: "arch/arm/mach-mx5/Kconfig" ## CONFIG_MACH_MX51_EFIKAMX=y # CONFIG_MACH_MX51_EFIKASB is not set ## ## file: "arch/arm/mm/Kconfig" ## CONFIG_MMU=y CONFIG_ARM_THUMB=y #. Not selected #. CONFIG_MXC_PWM=y #. CONFIG_MXC_DEBUG_BOARD=y #. CONFIG_MXC_ULPI=y ## ## file: "arch/arm/common/Kconfig" ## ## ## file: "kernel/time/Kconfig" ## #. Need to check if this are needed or selected by other symbols. #. CONFIG_NO_HZ=y #. CONFIG_HIGH_RES_TIMERS=y #. Need to cross-check with rtp if we need split regions. CONFIG_VMSPLIT_3G=y CONFIG_PAGE_OFFSET=0xC0000000 #. At top level CONFIG_HZ_250=y found #. CONFIG_HZ=100 #. Force console from kernel cmdline CONFIG_CMDLINE="console=ttymxc0,115200 console=tty1" #. cpufreq driver for i.MX CPU CONFIG_CPU_FREQ_IMX=m CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 #. Proposed to bring to arm generic conf CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y ## ## file: "drivers/cpufreq/Kconfig" ## #. Missing dependency of CPU_FREQ? CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_IMX=m #. Promote to toplevel CONFIG_VFP=y CONFIG_VFPv3=y #. Enable NEON SIMD support CONFIG_NEON=y ## ## file: "fs/Kconfig.binfmt" ## ## ## file: "kernel/power/Kconfig" ## ## ## file: "net/Kconfig" ## ## ## file: "drivers/Kconfig" ## ## file: "drivers/base/Kconfig" #. CONFIG_DEVTMPFS is not set #. CONFIG_STANDALONE is not set #. CONFIG_PREVENT_FIRMWARE_BUILD is not set #. Extra firmware might need to be enabled, it is not required at the moment #. but it needs better investigation #. CONFIG_FW_LOADER is not set #. CONFIG_FIRMWARE_IN_KERNEL is not set #. CONFIG_EXTRA_FIRMWARE is not set #. CONFIG_EXTRA_FIRMWARE_DIR is not set ## file: "drivers/connector/Kconfig" #. I guess we do not this #. CONFIG_PROC_EVENTS=y ## file: "drivers/mtd/Kconfig" #. Do we need this? #. CONFIG_MTD=y #. CONFIG_MTD_CONCAT=y #. CONFIG_MTD_PARTITIONS=y #. CONFIG_MTD_CMDLINE_PARTS=y #. CONFIG_MTD_CHAR=y #. CONFIG_MTD_BLOCK=y ## file: drivers/mtd/chips/Kconfig #. ditto #. CONFIG_MTD_CFI=y #. CONFIG_MTD_JEDECPROBE=y #. CONFIG_MTD_GEN_PROBE=y #. CONFIG_MTD_MAP_BANK_WIDTH_1=y #. CONFIG_MTD_MAP_BANK_WIDTH_2=y #. CONFIG_MTD_MAP_BANK_WIDTH_4=y #. CONFIG_MTD_CFI_I1=y #. CONFIG_MTD_CFI_I2=y #. CONFIG_MTD_CFI_UTIL=y ## file: drivers/mtd/devices/Kconfig #. CONFIG_MTD_PHRAM=y #. CONFIG_MTD_BLOCK2MTD=y ## ## file: drivers/block/Kconfig ## ## file: "drivers/ide/Kconfig" #. CONFIG_HAVE_IDE=y ## file: "drivers/scsi/Kconfig" #. XXX Needed to promote to main config? CONFIG_SCSI_MOD=y CONFIG_SCSI_DMA=y CONFIG_SCSI_WAIT_SCAN=m ## file: "drivers/ata/Kconfig" #. Not yet supported on this kernel, need patch which it is available #. CONFIG_HAVE_PATA_PLATFORM=y #. CONFIG_PATA_PLATFORM=y ## file: "drivers/target/Kconfig" ## file: "drivers/message/fusion/Kconfig" ## file: "drivers/firewire/Kconfig" ## file: "drivers/message/i2o/Kconfig" ## file: "drivers/macintosh/Kconfig" ## file: "drivers/net/Kconfig" ## file: "drivers/isdn/Kconfig" ## file: "drivers/telephony/Kconfig" ## file: "drivers/input/Kconfig" #. XXX Not sure about this, do not see them on toplevel #. CONFIG_INPUT_KEYBOARD=y #. CONFIG_KEYBOARD_ATKBD=y #. CONFIG_KEYBOARD_GPIO=y #. CONFIG_INPUT_MOUSE=y #. CONFIG_MOUSE_PS2=y #. CONFIG_MOUSE_PS2_ALPS=y #. CONFIG_MOUSE_PS2_LOGIPS2PP=y #. CONFIG_MOUSE_PS2_SYNAPTICS=y #. CONFIG_MOUSE_PS2_TRACKPOINT=y #. CONFIG_MOUSE_PS2_ELANTECH=y #. CONFIG_SERIO=y #. CONFIG_SERIO_LIBPS2=y ## file: "drivers/char/Kconfig" CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y #. Not set at top level - needed? CONFIG_HW_RANDOM=y ## file: "drivers/tty/serial/Kconfig" CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y ## file: "drivers/i2c/Kconfig" #. XXX It need to check whether is needed #. CONFIG_I2C=y #. CONFIG_I2C_BOARDINFO=y #. CONFIG_I2C_CHARDEV=y #. CONFIG_I2C_ALGOBIT=y #. CONFIG_I2C_ALGOPCF=y #. CONFIG_I2C_ALGOPCA=y CONFIG_I2C_IMX=y ## file: "drivers/spi/Kconfig" CONFIG_SPI_MASTER=y CONFIG_SPI_GPIO=y CONFIG_SPI_IMX_VER_0_7=y CONFIG_SPI_IMX_VER_2_3=y CONFIG_SPI_IMX=y ## file: "drivers/pps/Kconfig" #. Not set on main config #. Promote for generic ARM? CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y ## file: "drivers/gpio/Kconfig" ## file: "drivers/w1/Kconfig" ## file: "drivers/power/Kconfig" #. Not set on main config #. Promote to generic ARM? CONFIG_POWER_SUPPLY=y #. CONFIG_BATTERY_EFIKASB is not set ## file: "drivers/hwmon/Kconfig" ## file: "drivers/thermal/Kconfig" ## file: "drivers/watchdog/Kconfig" CONFIG_IMX2_WDT=y CONFIG_SSB_POSSIBLE=y ## file: "drivers/ssb/Kconfig" ## file: "drivers/mfd/Kconfig" #. Defaults to Y #. CONFIG_MFD_SUPPORT=y CONFIG_MFD_MC13XXX=y #. CONFIG_MFD_IMX_IPU_V3 is not set ## file: "drivers/regulator/Kconfig" #. Provide dummy if lookup fails CONFIG_REGULATOR_DUMMY=y #. It is not set at top level CONFIG_REGULATOR_VIRTUAL_CONSUMER=y #. Included as module, should not be regulator stuff included as built-in? CONFIG_REGULATOR_USERSPACE_CONSUMER=y CONFIG_REGULATOR_MC13892=y ## file: "drivers/media/Kconfig" ## file: "drivers/video/Kconfig" CONFIG_FB=y #. Not yet on this kernel, patch available #. CONFIG_FB_MX5 is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y #. Not set on top level CONFIG_LCD_CLASS_DEVICE=y #. CONFIG_LCD_MTL017 not in this kernel, patch available CONFIG_BACKLIGHT_PWM=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y #. Remove? #. CONFIG_FONT_8x8=y #. CONFIG_FONT_8x16=y #. CONFIG_LOGO=y #. CONFIG_LOGO_LINUX_MONO=y #. CONFIG_LOGO_LINUX_VGA16=y #. CONFIG_LOGO_LINUX_CLUT224=y ## file: "sound/Kconfig" CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_JACK=y #. Not set at toplevel CONFIG_SND_SOC=m CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_IMX_SOC=m CONFIG_SND_MXC_SOC_MX2=m CONFIG_SND_SOC_IMX_SGTL5000=m CONFIG_SND_SOC_I2C_AND_SPI=m CONFIG_SND_SOC_SGTL5000=m CONFIG_AC97_BUS=m ## file: "drivers/hid/Kconfig" #. This is a module on top level CONFIG_HID=y CONFIG_USB_HID=y ## file: "drivers/usb/Kconfig" CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y #. Not set on toplevel CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_OTG_UTILS=y CONFIG_USB_ULPI=y CONFIG_USB_NET_CDC_NCM=y ## file: "drivers/uwb/Kconfig" ## file: "drivers/mmc/Kconfig" CONFIG_MMC=y CONFIG_MMC_BLOCK=y CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_MXC=y ## file: "drivers/memstick/Kconfig" ## file: "drivers/leds/Kconfig" #. Not set at toplevel CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y CONFIG_LEDS_TRIGGER_GPIO=y #. CONFIG_LEDS_TRIGGER_KEYBOARD=y ## file: "drivers/nfc/Kconfig" ## file: "drivers/accessibility/Kconfig" ## file: "drivers/infiniband/Kconfig" ## file: "drivers/edac/Kconfig" ## file: "drivers/rtc/Kconfig" CONFIG_RTC_LIB=y #. Disabled on top level CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_DMADEVICES=y ## file: "drivers/dma/Kconfig" CONFIG_IMX_SDMA=y CONFIG_DMA_ENGINE=y CONFIG_NET_DMA=y ## file: "drivers/dca/Kconfig" ## file: "drivers/auxdisplay/Kconfig" ## file: "drivers/uio/Kconfig" ## file: "drivers/vlynq/Kconfig" ## file: "drivers/xen/Kconfig" ## file: "drivers/staging/Kconfig" ## file: "drivers/platform/Kconfig" ## file: "drivers/clk/Kconfig" ## ## file: "fs/Kconfig" ## ## ## file: "arch/arm/Kconfig.debug" ## ## ## file: "security/Kconfig" ## ## ## file: "crypto/Kconfig" ## ## ## file: "lib/Kconfig" ## > live well, > vagrant > > debian/config/armhf/config | 58 ++++ > debian/config/armhf/config.mx5 | 253 > ++++++++++++++++++++ > debian/config/armhf/defines | 17 + > linux-2.6-2.6.38/debian/config/defines | 1 > linux-2.6-2.6.38/debian/rules.real | 3 > linux-2.6-2.6.38/debian/templates/control.main.in | 2 > linux-2.6-2.6.38/debian/templates/control.source.in | 2 > 7 files changed, 333 insertions(+), 3 deletions(-) > > diff -u linux-2.6-2.6.38/debian/rules.real linux-2.6-2.6.38/debian/rules.real > --- linux-2.6-2.6.38/debian/rules.real > +++ linux-2.6-2.6.38/debian/rules.real > @@ -39,7 +39,7 @@ > # > binary-arch-arch: install-headers_$(ARCH) > binary-arch-arch: install-libc-dev_$(ARCH) > -ifneq ($(filter alpha amd64 armel hppa i386 powerpc ppc64 s390 sh4 sparc > sparc64,$(ARCH)),) > +ifneq ($(filter alpha amd64 armel armhf hppa i386 powerpc ppc64 s390 sh4 > sparc sparc64,$(ARCH)),) > binary-arch-arch: install-tools_$(ARCH) > endif > binary-arch-featureset: install-headers_$(ARCH)_$(FEATURESET) > @@ -364,6 +364,7 @@ > > install-image_arm_$(FEATURESET)_$(FLAVOUR)_plain_image \ > install-image_armel_$(FEATURESET)_$(FLAVOUR)_plain_image \ > +install-image_armhf_$(FEATURESET)_$(FLAVOUR)_plain_image \ > install-image_sparc_$(FEATURESET)_$(FLAVOUR)_plain_image \ > install-image_sparc64_$(FEATURESET)_$(FLAVOUR)_plain_image \ > install-image_sh4_$(FEATURESET)_$(FLAVOUR)_plain_image: > > diff -u linux-2.6-2.6.38/debian/templates/control.source.in > linux-2.6-2.6.38/debian/templates/control.source.in > --- linux-2.6-2.6.38/debian/templates/control.source.in > +++ linux-2.6-2.6.38/debian/templates/control.source.in > @@ -3,7 +3,7 @@ > Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org> > Uploaders: Bastian Blank <wa...@debian.org>, Frederik Schüler > <f...@debian.org>, maximilian attems <m...@debian.org>, Ben Hutchings > <b...@decadent.org.uk> > Standards-Version: 3.9.1 > -Build-Depends: debhelper (>> 7), cpio, module-init-tools, python, lzma > [armel], libelf-dev, libdw-dev, binutils-dev, asciidoc, xmlto, libperl-dev, > python-dev, libnewt-dev, python-support > +Build-Depends: debhelper (>> 7), cpio, module-init-tools, python, lzma > [armel armhf], libelf-dev, libdw-dev, binutils-dev, asciidoc, xmlto, > libperl-dev, python-dev, libnewt-dev, python-support > Build-Depends-Indep: bzip2 > Vcs-Svn: svn://svn.debian.org/svn/kernel/dists/sid/linux-2.6/ > Vcs-Browser: http://svn.debian.org/wsvn/kernel/dists/sid/linux-2.6/?op=log > diff -u linux-2.6-2.6.38/debian/templates/control.main.in > linux-2.6-2.6.38/debian/templates/control.main.in > --- linux-2.6-2.6.38/debian/templates/control.main.in > +++ linux-2.6-2.6.38/debian/templates/control.main.in > @@ -1,5 +1,5 @@ > Package: linux-tools-@version@ > -Architecture: alpha amd64 armel hppa i386 powerpc ppc64 s390 sh4 sparc > sparc64 > +Architecture: alpha amd64 armel armhf hppa i386 powerpc ppc64 s390 sh4 sparc > sparc64 > Depends: ${shlibs:Depends}, ${misc:Depends}, ${perl:Depends}, > ${python:Depends} > Recommends: linux-base (>= 2.6.32-16) > Suggests: linux-doc-@version@ > diff -u linux-2.6-2.6.38/debian/config/defines > linux-2.6-2.6.38/debian/config/defines > --- linux-2.6-2.6.38/debian/config/defines > +++ linux-2.6-2.6.38/debian/config/defines > @@ -6,6 +6,7 @@ > alpha > amd64 > armel > + armhf > hppa > i386 > ia64 > only in patch2: > unchanged: > --- linux-2.6-2.6.38.orig/debian/config/armhf/config.mx5 > +++ linux-2.6-2.6.38/debian/config/armhf/config.mx5 > @@ -0,0 +1,253 @@ > +## > +## file: arch/arm/Kconfig > +## > +## choice: ARM system type > +CONFIG_ARCH_MXC=y > + > +CONFIG_IMX_HAVE_PLATFORM_FEC=y > +CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS=y > +CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y > +CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y > +CONFIG_IMX_HAVE_PLATFORM_IMX_SSI=y > +CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y > +CONFIG_IMX_HAVE_PLATFORM_MXC_PWM=y > +CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX=y > +CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y > +# CONFIG_IMX_HAVE_PLATFORM_IMX_IPUV3 is not set > + Some of these are selected by CONFIG_ARCH_MX5 > +## > +## file: "arch/arm/plat-mxc/Kconfig" > +## > +CONFIG_ARCH_MX5=y > +## > +## file: "arch/arm/mach-mx5/Kconfig" > +## > +CONFIG_ARCH_MX51=y > +CONFIG_SOC_IMX51=y > +CONFIG_MACH_MX51_EFIKAMX=y Selecting EFIKAMX, implies SOC_IMX51 and CPU_V7, which implies all the symbols below. > +# CONFIG_MACH_MX51_EFIKASB is not set > +## > +## file: "arch/arm/mm/Kconfig" > +## > +CONFIG_CPU_32v6K=y > +CONFIG_CPU_32v7=y > +CONFIG_CPU_ABRT_EV7=y > +CONFIG_CPU_PABRT_V7=y > +CONFIG_CPU_CACHE_V7=y > +CONFIG_CPU_CACHE_VIPT=y > +CONFIG_CPU_COPY_V6=y > +CONFIG_CPU_TLB_V7=y > +CONFIG_CPU_HAS_ASID=y > +CONFIG_CPU_CP15=y > +CONFIG_CPU_CP15_MMU=y > +# CONFIG_ARM_THUMBEE is not set > +# CONFIG_SWP_EMULATE is not set > +# CONFIG_CPU_ICACHE_DISABLE is not set > +# CONFIG_CPU_DCACHE_DISABLE is not set > +# CONFIG_CPU_BPREDICT_DISABLE is not set > +CONFIG_ARM_L1_CACHE_SHIFT=6 > +CONFIG_ARM_DMA_MEM_BUFFERABLE=y > +# CONFIG_ARM_ERRATA_430973 is not set > +# CONFIG_ARM_ERRATA_458693 is not set > +# CONFIG_ARM_ERRATA_460075 is not set > +# CONFIG_ARM_ERRATA_743622 is not set > + > +# CONFIG_MXC_IRQ_PRIOR is not set > +CONFIG_MXC_TZIC=y > +# CONFIG_MXC_AVIC is not set Some of the symbols below are not selected, are those really needed? > +CONFIG_MXC_PWM=y > +CONFIG_MXC_DEBUG_BOARD=y > +CONFIG_MXC_ULPI=y > +CONFIG_ARCH_MXC_IOMUX_V3=y > +CONFIG_ARCH_MXC_AUDMUX_V2=y > +CONFIG_CPU_HAS_PMU=y > + > +CONFIG_ARCH_HAS_CPUFREQ=y > +CONFIG_CPU_FREQ_IMX=m > +CONFIG_ZBOOT_ROM_TEXT=0x0 > +CONFIG_ZBOOT_ROM_BSS=0x0 > + > +# CONFIG_XIP_KERNEL is not set > +CONFIG_KEXEC=y > +CONFIG_ATAGS_PROC=y I would promote ^ to generic ARM config. > + > +# CONFIG_FPE_NWFPE_XP is not set > +# CONFIG_FPE_FASTFPE is not set > +CONFIG_NEON=y > +# CONFIG_ARTHUR is not set > + Some of the below symbols are selected on top main kernel config. See my WIP config.mx5 file > +## file: "drivers/connector/Kconfig" > +CONFIG_PROC_EVENTS=y > + > +## file: "drivers/ide/Kconfig" > +CONFIG_HAVE_IDE=y > + > +## file: "drivers/scsi/Kconfig" > +CONFIG_SCSI_MOD=y > +CONFIG_SCSI_WAIT_SCAN=m > + > +## file: "drivers/ata/Kconfig" > +CONFIG_HAVE_PATA_PLATFORM=y > +CONFIG_PATA_PLATFORM=y > + > +## file: "drivers/net/Kconfig" > +CONFIG_RT2800_LIB=y > +CONFIG_RT2X00_LIB_USB=y > +CONFIG_RT2X00_LIB=y > +CONFIG_RT2X00_LIB_HT=y > +CONFIG_RT2X00_LIB_FIRMWARE=y > +CONFIG_RT2X00_LIB_CRYPTO=y > +CONFIG_RT2X00_LIB_LEDS=y > +CONFIG_RT2X00_LIB_DEBUGFS=y > + > +## file: "drivers/input/Kconfig" > +CONFIG_INPUT_KEYBOARD=y > +CONFIG_KEYBOARD_ATKBD=y > +CONFIG_KEYBOARD_GPIO=y > +CONFIG_INPUT_MOUSE=y > +CONFIG_MOUSE_PS2=y > +CONFIG_MOUSE_PS2_LOGIPS2PP=y > +CONFIG_MOUSE_PS2_SYNAPTICS=y > +CONFIG_MOUSE_PS2_TRACKPOINT=y > +CONFIG_SERIO=y > +CONFIG_SERIO_LIBPS2=y > + > +## file: "drivers/char/Kconfig" > +CONFIG_VT=y > +CONFIG_CONSOLE_TRANSLATIONS=y > +CONFIG_VT_CONSOLE=y > +CONFIG_HW_CONSOLE=y > +CONFIG_HW_RANDOM=y > + > +## file: "drivers/tty/serial/Kconfig" > +CONFIG_SERIAL_IMX=y > +CONFIG_SERIAL_IMX_CONSOLE=y > +CONFIG_SERIAL_CORE=y > +CONFIG_SERIAL_CORE_CONSOLE=y > +## file: "drivers/i2c/Kconfig" > +CONFIG_I2C=y > +CONFIG_I2C_BOARDINFO=y > +CONFIG_I2C_CHARDEV=y > +CONFIG_I2C_ALGOBIT=y > +CONFIG_I2C_ALGOPCF=y > +CONFIG_I2C_ALGOPCA=y > +CONFIG_I2C_IMX=y > +## file: "drivers/spi/Kconfig" > +CONFIG_SPI_MASTER=y > +CONFIG_SPI_GPIO=y > +CONFIG_SPI_IMX_VER_0_7=y > +CONFIG_SPI_IMX_VER_2_3=y > +CONFIG_SPI_IMX=y > + > +## file: "drivers/pps/Kconfig" > +CONFIG_ARCH_REQUIRE_GPIOLIB=y > +CONFIG_GPIOLIB=y > +CONFIG_GPIO_SYSFS=y > + > +## file: "drivers/power/Kconfig" > +CONFIG_POWER_SUPPLY=y > +# CONFIG_BATTERY_EFIKASB is not set > + > +## file: "drivers/watchdog/Kconfig" > +CONFIG_IMX2_WDT=y > +CONFIG_SSB_POSSIBLE=y > + > +## file: "drivers/mfd/Kconfig" > +CONFIG_MFD_CORE=y > +CONFIG_MFD_MC13783=y > +CONFIG_MFD_MC13XXX=y > +# CONFIG_MFD_IMX_IPU_V3 is not set > + > +## file: "drivers/regulator/Kconfig" > +CONFIG_REGULATOR_DUMMY=y > +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y > +CONFIG_REGULATOR_MC13XXX_CORE=y > +CONFIG_REGULATOR_MC13892=y > + > +## file: "drivers/video/Kconfig" > +CONFIG_FB=y > +CONFIG_FB_CFB_FILLRECT=y > +CONFIG_FB_CFB_COPYAREA=y > +CONFIG_FB_CFB_IMAGEBLIT=y > +CONFIG_FB_MODE_HELPERS=y > +CONFIG_FB_TILEBLITTING=y > +# CONFIG_FB_MX5 is not set > +CONFIG_LCD_CLASS_DEVICE=y > +# CONFIG_LCD_MTL017 is not set > +CONFIG_BACKLIGHT_PWM=y > +CONFIG_DUMMY_CONSOLE=y > +CONFIG_FRAMEBUFFER_CONSOLE=y > +CONFIG_FONT_8x8=y > +CONFIG_FONT_8x16=y > +CONFIG_LOGO=y > +CONFIG_LOGO_LINUX_MONO=y > +CONFIG_LOGO_LINUX_VGA16=y > +CONFIG_LOGO_LINUX_CLUT224=y > + > +## file: "sound/Kconfig" > +CONFIG_SND_TIMER=m > +CONFIG_SND_PCM=m > +CONFIG_SND_JACK=y > +CONFIG_SND_SOC=m > +CONFIG_SND_SOC_AC97_BUS=y > +CONFIG_SND_IMX_SOC=m > +CONFIG_SND_MXC_SOC_MX2=m > +CONFIG_SND_SOC_IMX_SGTL5000=m > +CONFIG_SND_SOC_I2C_AND_SPI=m > +CONFIG_SND_SOC_SGTL5000=m > +CONFIG_AC97_BUS=m > + > +## file: "drivers/hid/Kconfig" > +CONFIG_USB_HID=y > + > +## file: "drivers/usb/Kconfig" > +CONFIG_USB_ARCH_HAS_HCD=y > +CONFIG_USB_ARCH_HAS_EHCI=y > +CONFIG_USB=y > +CONFIG_USB_DEVICE_CLASS=y > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_EHCI_ROOT_HUB_TT=y > +CONFIG_USB_EHCI_MXC=y > +CONFIG_USB_OTG_UTILS=y > +CONFIG_USB_ULPI=y > +CONFIG_USB_NET_CDC_NCM=y > + > +## file: "drivers/mmc/Kconfig" > +CONFIG_MMC=m > +CONFIG_MMC_BLOCK=y > +CONFIG_MMC_SDHCI_IO_ACCESSORS=y > +CONFIG_MMC_SDHCI_ESDHC_IMX=y > +CONFIG_MMC_MXC=y > + > +## file: "drivers/rtc/Kconfig" > +CONFIG_RTC_LIB=y > +CONFIG_RTC_INTF_DEV_UIE_EMUL=y > +CONFIG_RTC_DRV_MC13XXX=y > +CONFIG_DMADEVICES=y > + > +## file: "drivers/dma/Kconfig" > +CONFIG_IMX_SDMA=y > +CONFIG_DMA_ENGINE=y > +CONFIG_NET_DMA=y > + > +## file: "drivers/clk/Kconfig" > +CONFIG_CLKDEV_LOOKUP=y > + > +## > +## file: "security/Kconfig" > +## > +CONFIG_SECURITYFS=y > +CONFIG_DEFAULT_SECURITY_DAC=y > +CONFIG_DEFAULT_SECURITY="" > + > +## > +## file: "lib/Kconfig" > +## > +CONFIG_BITREVERSE=y > +CONFIG_RATIONAL=y > +CONFIG_GENERIC_FIND_LAST_BIT=y > +CONFIG_HAS_IOMEM=y > +CONFIG_HAS_IOPORT=y > +CONFIG_HAS_DMA=y > +CONFIG_NLATTR=y > +CONFIG_AVERAGE=y > only in patch2: > unchanged: > --- linux-2.6-2.6.38.orig/debian/config/armhf/defines > +++ linux-2.6-2.6.38/debian/config/armhf/defines > @@ -0,0 +1,17 @@ > +[base] > +flavours: > + mx5 > +kernel-arch: arm > + > +[image] > +suggests: fdutils > + > +[mx5_build] > +image-file: arch/arm/boot/zImage > + > +[mx5_description] > +hardware: Freescale MXC/iMX-based > +hardware-long: Support for Freescale MXC/iMX-based family of processors > + > +[mx5_image] > +recommends: uboot-mkimage > only in patch2: > unchanged: > --- linux-2.6-2.6.38.orig/debian/config/armhf/config > +++ linux-2.6-2.6.38/debian/config/armhf/config > @@ -0,0 +1,58 @@ > +## > +## file: arch/arm/Kconfig > +## > +## choice: ARM system type > +# CONFIG_ARCH_REALVIEW is not set > +## end choice > +CONFIG_AEABI=y > +CONFIG_OABI_COMPAT=y > + > +## > +## file: arch/arm/Kconfig.debug > +## > +CONFIG_DEBUG_LL=y > +CONFIG_EARLY_PRINTK=y > + > +## > +## file: drivers/input/misc/Kconfig > +## > +CONFIG_INPUT_MISC=y > +CONFIG_INPUT_UINPUT=m > + > +## > +## file: drivers/input/mouse/Kconfig > +## > +CONFIG_INPUT_MOUSE=y > +CONFIG_MOUSE_PS2=m > +CONFIG_MOUSE_APPLETOUCH=m > + > +## > +## file: drivers/net/wireless/ipw2x00/Kconfig > +## > +# CONFIG_IPW2100 is not set > + > +## > +## file: drivers/parport/Kconfig > +## > +#. Causes lockups on ARM (see #588164) > +# CONFIG_PARPORT_PC is not set > + > +## > +## file: init/Kconfig > +## > +## choice: Kernel compression mode > +# CONFIG_KERNEL_BZIP2 is not set > +CONFIG_KERNEL_LZMA=y > +## end choice > + > +## > +## file: "arch/arm/mm/Kconfig" > +## > +CONFIG_CPU_V7=y > +CONFIG_ARM_THUMB=y > + > +## > +## file: "arch/arm/Kconfig" > +## > +CONFIG_VFP=y > +CONFIG_VFPv3=y > > > -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110417093951.ga4...@flaco.tsc-farm.upc.es
