Package: linux-2.6 Version: 2.6.38-3 Severity: normal
This seems to be the same as http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=614566
When booting with modeset=1, the screen flickers constantly, showing the real
content only for one in ~15 seconds. Booting with modeset=0 works. I've also attached a dmesg log where modesetting was enabled.Thanks for your time and work, if there's anything else I can do to help, please yell!
Best Regards, David -- Package-specific info: ** Version:Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
** Command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/debian-debian ro ** Not tainted ** Kernel log:[ 2.101025] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 2.272132] usb 5-2: New USB device found, idVendor=046d, idProduct=c00e[ 2.272170] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.272206] usb 5-2: Product: USB-PS/2 Optical Mouse [ 2.272240] usb 5-2: Manufacturer: Logitech[ 2.288329] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input0 [ 2.288438] generic-usb 0003:046D:C00E.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 2.424027] ata7: SATA link down (SStatus 0 SControl 300) [ 2.744027] ata8: SATA link down (SStatus 0 SControl 300)[ 2.750095] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.750179] sd 3:0:0:0: [sda] Write Protect is off [ 2.750212] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00[ 2.750232] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.776136] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input1 [ 2.776261] microsoft 0003:045E:00DB.0001: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1/input0 [ 2.797323] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input2 [ 2.797407] microsoft 0003:045E:00DB.0002: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1/input1
[ 2.801462] sda: sda1 sda2 sda3 < sda5 > [ 2.801834] sd 3:0:0:0: [sda] Attached SCSI disk[ 2.806000] sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.806043] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.806203] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.810036] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.810173] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 3.259559] device-mapper: uevent: version 1.0.3[ 3.259711] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-de...@redhat.com
[ 3.426439] PM: Starting manual resume from disk [ 3.426476] PM: Hibernation image partition 254:1 present [ 3.426478] PM: Looking for hibernation image. [ 3.426599] PM: Image not found (code -22) [ 3.426602] PM: Hibernation image not present or could not be loaded. [ 3.443445] EXT3-fs: barriers not enabled [ 3.450816] kjournald starting. Commit interval 5 seconds [ 3.450836] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 4.815589] <30>udev[369]: starting version 167 [ 5.285071] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 5.359650] ACPI: acpi_idle registered with cpuidle[ 5.378581] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 5.378672] ACPI: Power Button [PWRB][ 5.378757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.378822] ACPI: Power Button [PWRF] [ 5.855214] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)[ 5.855256] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.855295] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f] [ 5.855333] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.090766] [drm] Initialized drm 1.1.0 20060810[ 6.145885] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.145967] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6.145989] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.184777] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.184815] pci 0000:01:00.0: setting latency timer to 64 [ 6.184962] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.184994] [drm] No driver support for vblank timestamp query.[ 6.185026] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[ 6.576866] hda_codec: AD1988: BIOS auto-probing.[ 6.576994] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 6.579556] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.579641] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 6.579663] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 11.630614] EXT3-fs (dm-0): using internal journal [ 11.939134] loop: module loaded[ 12.094984] Adding 1949692k swap on /dev/mapper/debian-swap. Priority:-1 extents:1 across:1949692k
[ 12.318840] EXT3-fs: barriers not enabled [ 12.325044] kjournald starting. Commit interval 5 seconds [ 12.325235] EXT3-fs (sda2): using internal journal [ 12.325268] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 13.003166] Bridge firewalling registered [ 13.005279] device eth0 entered promiscuous mode [ 13.006087] skge 0000:04:04.0: eth0: enabling interface [ 13.010665] lan: port 1(eth0) entering learning state [ 13.010699] lan: port 1(eth0) entering learning state[ 16.818673] skge 0000:04:04.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 23.344009] eth0: no IPv6 routers present [ 23.376018] lan: no IPv6 routers present [ 28.064017] lan: port 1(eth0) entering forwarding state [ 32.487411] fuse init (API version 7.16) [ 36.647890] Bluetooth: Core ver 2.15 [ 36.647945] NET: Registered protocol family 31 [ 36.647978] Bluetooth: HCI device and connection manager initialized [ 36.648033] Bluetooth: HCI socket layer initialized [ 36.682374] Bluetooth: L2CAP ver 2.15 [ 36.682412] Bluetooth: L2CAP socket layer initialized [ 36.824582] Bluetooth: RFCOMM TTY layer initialized [ 36.824619] Bluetooth: RFCOMM socket layer initialized [ 36.824651] Bluetooth: RFCOMM ver 1.11 [ 36.837331] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.837372] Bluetooth: BNEP filters: protocol multicast [ 36.876032] Bluetooth: SCO (Voice Link) ver 0.6 [ 36.876072] Bluetooth: SCO socket layer initialized [ 37.690542] lp: driver loaded but no devices found [ 37.730876] ppdev: user-space parallel port driver [ 38.332625] [drm] Setting GART location based on new memory map [ 38.332855] [drm] Loading R600 CP Microcode [ 38.492822] [drm] Resetting GPU [ 38.492881] [drm] writeback test succeeded in 2 usecs[ 40.822683] sshd (2257): /proc/2257/oom_adj is deprecated, please use /proc/2257/oom_score_adj instead.
[ 64.656056] UDF-fs: Partition marked readonly; forcing readonly mount[ 64.680832] UDF-fs INFO UDF: Mounting volume '7_WORKOUTS_TCM', timestamp 2010/09/29 15:12 (1000)
[ 122.509259] [drm] Resetting GPU [ 127.864271] [drm] Resetting GPU ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1201 board_vendor: ASUSTeK Computer INC. board_name: P5B-V board_version: Rev 1.xx ** Loaded modules: Module Size Used by isofs 34960 0 udf 71210 1 acpi_cpufreq 12849 0 mperf 12411 1 acpi_cpufreq cpufreq_stats 12713 0 cpufreq_powersave 12454 0 cpufreq_conservative 13878 0 cpufreq_userspace 12576 0 parport_pc 22191 0 ppdev 12725 0 lp 17190 0 parport 31650 3 parport_pc,ppdev,lp sco 17555 2 bnep 17424 2 rfcomm 32744 0 l2cap 40163 6 bnep,rfcomm crc16 12343 1 l2cap bluetooth 55503 6 sco,bnep,rfcomm,l2cap rfkill 19014 3 bluetooth binfmt_misc 12914 1 fuse 61520 1 bridge 65499 0 stp 12392 1 bridge loop 22515 0 firewire_sbp2 17825 0 snd_hda_codec_hdmi 22161 1 snd_hda_codec_analog 77560 1 snd_seq 44678 0 radeon 717227 1 snd_seq_device 13155 1 snd_seq ttm 52155 1 radeon snd_hda_intel 25946 1 drm_kms_helper 26893 1 radeon drm 165567 4 radeon,ttm,drm_kms_helpersnd_hda_codec 67647 3 snd_hda_codec_hdmi,snd_hda_codec_analog,snd_hda_intel
i2c_algo_bit 12834 1 radeon snd_hwdep 13148 1 snd_hda_codecsnd_pcm 67327 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_timer 22658 2 snd_seq,snd_pcm tpm_tis 13125 0 i2c_i801 16870 0snd 52280 11 snd_hda_codec_hdmi,snd_hda_codec_analog,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 13014 1 snd snd_page_alloc 12969 2 snd_hda_intel,snd_pcmi2c_core 23725 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
tpm 17726 1 tpm_tis power_supply 13475 1 radeon tpm_bios 12903 1 tpm asus_atk0110 17276 0 button 12994 0 processor 27431 1 acpi_cpufreq psmouse 55199 0 pcspkr 12579 0 evdev 17475 9 joydev 17138 0 thermal_sys 17939 1 processor serio_raw 12878 0 ext3 112218 2 jbd 41698 1 ext3 mbcache 12930 1 ext3 dm_mod 62467 7 sg 25769 0 sr_mod 21824 1 cdrom 35134 1 sr_mod sd_mod 35501 3 hid_microsoft 12561 0 ata_generic 12479 0 crc_t10dif 12348 1 sd_mod usbhid 39900 0 hid 72616 2 hid_microsoft,usbhid uhci_hcd 26290 0 pata_jmicron 12472 1 ahci 25089 2 libahci 22568 1 ahci libata 147240 4 ata_generic,pata_jmicron,ahci,libahci skge 40243 0 scsi_mod 161457 5 firewire_sbp2,sg,sr_mod,sd_mod,libata firewire_ohci 30887 0 firewire_core 47683 2 firewire_sbp2,firewire_ohci ehci_hcd 39529 0 floppy 56861 0 usbcore 122908 4 usbhid,uhci_hcd,ehci_hcd crc_itu_t 12347 2 udf,firewire_core nls_base 12753 3 isofs,udf,usbcore ** PCI devices:00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:820b]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0 Capabilities: <access denied>00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00008000-0000afff Memory behind bridge: ff700000-ff7fffff Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport00:03.0 Communication controller [0780]: Intel Corporation 82P965/G965 HECI Controller [8086:29a4] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:820b]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at ffaff400 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied>00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at e080 [size=32] Kernel driver in use: uhci_hcd00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at ffaff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:821a]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at ffaf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: b0000000-b03fffff Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: ff800000-ff8fffff Prefetchable memory behind bridge: 00000000b0400000-00000000b05fffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec]Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ffafec00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ff900000-ff9fffffSecondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied>00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:821a]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Capabilities: <access denied>00:1f.2 SATA controller [0106]: Intel Corporation 82801HB (ICH8) 4 port SATA AHCI Controller [8086:2824] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:821a]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=32] Region 5: Memory at ffaff800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:821a]Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18 Region 0: Memory at b0600000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32]01:00.0 VGA compatible controller [0300]: ATI Technologies Inc R600 [Radeon HD 2900 Series] [1002:9400] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Sapphire Radeon HD 2900 XT [1002:3000]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at ff7f0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at a000 [size=256] Expansion ROM at ff7c0000 [disabled] [size=128K] Capabilities: <access denied>01:00.1 Audio device [0403]: ATI Technologies Inc R600 Audio Device [Radeon HD 2900 Series] [1002:aa00] Subsystem: ATI Technologies Inc R600 Audio Device [Radeon HD 2900 Series] [1002:aa00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 45 Region 0: Memory at ff7ec000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at ff8fe000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at ff8e0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4]Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at b880 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b480 [size=4] Region 4: I/O ports at b400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron04:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at ff9ff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at cc00 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci04:04.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 14) Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ff9f8000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at c800 [size=256] Expansion ROM at ff9c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: skge ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 005 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0 Bus 005 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
-- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.38-2-amd64 depends on:ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base packageii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:ii grub-pc 1.98+20100804-14 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available)ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information:linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64: linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
dmesg.1.gz
Description: GNU Zip compressed data