Package: linux-2.6 Version: 2.6.32-30 Severity: normal *** Please type your report below this line ***
Hi, The Asus WL-167g USB wifi dongle doesn't work with 2.6.32, it never gets an address when DHCP is used. A static configuration does however work. Others[0] have apparently had the same problem but, I didn't find a bug report. According to this Ubuntu bug[1], this is a problem that has been resolved in 2.6.36 (I have confirmed this both on .36 and .37) but no word of a specific fix. There's also a very similar bug for Fedora[2], but concerning rt2500pci. When I have a little more time, I will try a bisect between .35 and .36 and see if I can track down what fixed this. Any pointers in the right direction is welcome. 0. http://lists.debian.org/debian-user/2010/02/msg01959.html 1. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/468072 2. https://bugzilla.redhat.com/show_bug.cgi?id=457441 -- Package-specific info: ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-30) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=1e2f54c2-b7b9-48bb-8af6-743dc5179c9e ro quiet ** Not tainted ** Kernel log: [ 5.877933] [drm] register mmio size: 65536 [ 5.878963] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 5.878996] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 5.879016] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x [ 5.879024] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 5.879083] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 5.879088] [drm] radeon: VRAM 128M [ 5.879091] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 5.879094] [drm] radeon: GTT 128M [ 5.879096] [drm] radeon: GTT from 0xE0000000 to 0xE7FFFFFF [ 5.879158] [drm] radeon: irq initialized. [ 5.879251] [drm] Detected VRAM RAM=128M, BAR=256M [ 5.879258] [drm] RAM width 128bits DDR [ 5.879571] [TTM] Zone kernel: Available graphics memory: 256808 kiB. [ 5.879607] [drm] radeon: 128M of VRAM memory ready [ 5.879610] [drm] radeon: 128M of GTT memory ready. [ 5.879867] [drm] radeon: cp idle (0x02000603) [ 5.879928] [drm] Loading R200 Microcode [ 5.880763] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 6.201889] [drm] radeon: ring at 0x00000000E0000000 [ 6.201912] [drm] ring test succeeded in 0 usecs [ 6.225439] [drm] radeon: ib pool ready. [ 6.225550] [drm] ib test succeeded in 0 usecs [ 6.228448] [drm] DFP table revision: 3 [ 6.229299] [drm] Radeon Display Connectors [ 6.229304] [drm] Connector 0: [ 6.229307] [drm] VGA [ 6.229310] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 6.229313] [drm] Encoders: [ 6.229316] [drm] CRT1: INTERNAL_DAC1 [ 6.229318] [drm] Connector 1: [ 6.229320] [drm] DVI-D [ 6.229322] [drm] HPD1 [ 6.229325] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 6.229345] [drm] Encoders: [ 6.229348] [drm] DFP1: INTERNAL_TMDS1 [ 6.289683] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 6.375769] [drm] fb mappable at 0xD0040000 [ 6.375773] [drm] vram apper at 0xD0000000 [ 6.375775] [drm] size 3145728 [ 6.375778] [drm] fb depth is 24 [ 6.375780] [drm] pitch is 4096 [ 6.448069] Console: switching to colour frame buffer device 128x48 [ 6.464400] fb0: radeondrmfb frame buffer device [ 6.464404] registered panic notifier [ 6.464415] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 7.319934] cfg80211: Using static regulatory domain info [ 7.319938] cfg80211: Regulatory domain: US [ 7.319941] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.319946] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 7.319949] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 7.319953] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 7.319957] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 7.319961] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 7.319964] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 7.320777] cfg80211: Calling CRDA for country: US [ 7.835137] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 7.835155] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 7.835326] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 7.918149] phy0: Selected rate control algorithm 'minstrel' [ 7.919251] Registered led device: rt2500usb-phy0::radio [ 7.919277] Registered led device: rt2500usb-phy0::quality [ 7.920236] usbcore: registered new interface driver rt2500usb [ 9.736149] Adding 746980k swap on /dev/sda5. Priority:-1 extents:1 across:746980k [ 9.978175] EXT3 FS on sda1, internal journal [ 10.144870] loop: module loaded [ 12.061792] fuse init (API version 7.13) [ 15.710030] eth0: setting half-duplex. [ 15.710185] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.881260] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.886790] eth1: link down [ 15.886909] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.901413] Bluetooth: Core ver 2.15 [ 17.901535] NET: Registered protocol family 31 [ 17.901538] Bluetooth: HCI device and connection manager initialized [ 17.901544] Bluetooth: HCI socket layer initialized [ 17.944946] Bluetooth: L2CAP ver 2.14 [ 17.944953] Bluetooth: L2CAP socket layer initialized [ 18.146926] Bluetooth: RFCOMM TTY layer initialized [ 18.146936] Bluetooth: RFCOMM socket layer initialized [ 18.146939] Bluetooth: RFCOMM ver 1.11 [ 18.286456] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.286463] Bluetooth: BNEP filters: protocol multicast [ 18.655701] Bridge firewalling registered [ 19.037775] Bluetooth: SCO (Voice Link) ver 0.6 [ 19.037781] Bluetooth: SCO socket layer initialized [ 19.861911] lp0: using parport0 (interrupt-driven). [ 19.899086] ppdev: user-space parallel port driver [ 111.148090] wlan0: direct probe to AP 00:1d:60:9d:a6:5a (try 1) [ 111.150392] wlan0: direct probe responded [ 111.150402] wlan0: authenticate with AP 00:1d:60:9d:a6:5a (try 1) [ 111.348037] wlan0: authenticate with AP 00:1d:60:9d:a6:5a (try 2) [ 111.349591] wlan0: authenticated [ 111.349625] wlan0: associate with AP 00:1d:60:9d:a6:5a (try 1) [ 111.351967] wlan0: RX AssocResp from 00:1d:60:9d:a6:5a (capab=0x411 status=0 aid=3) [ 111.351972] wlan0: associated [ 111.359565] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 111.424814] padlock: VIA PadLock not detected. [ 121.468024] wlan0: no IPv6 routers present [ 156.596649] wlan0: deauthenticating from 00:1d:60:9d:a6:5a by local choice (reason=3) ** Model information not available ** Loaded modules: Module Size Used by aes_i586 6816 0 aes_generic 25738 1 aes_i586 cpufreq_stats 1940 0 cpufreq_conservative 4018 0 cpufreq_userspace 1480 0 cpufreq_powersave 602 0 ppdev 4058 0 lp 5570 0 sco 5857 2 bridge 33019 0 stp 996 1 bridge bnep 7444 2 rfcomm 25171 0 l2cap 21705 6 bnep,rfcomm crc16 1027 1 l2cap bluetooth 36319 6 sco,bnep,rfcomm,l2cap binfmt_misc 4907 1 fuse 44033 1 loop 9765 0 arc4 974 2 ecb 1405 2 snd_via82xx 15256 1 gameport 6061 1 snd_via82xx snd_ac97_codec 79148 1 snd_via82xx ac97_bus 710 1 snd_ac97_codec snd_pcm 47226 2 snd_via82xx,snd_ac97_codec snd_page_alloc 5045 2 snd_via82xx,snd_pcm rt2500usb 14078 0 snd_mpu401_uart 4067 1 snd_via82xx rt2x00usb 5713 1 rt2500usb snd_seq_midi 3576 0 snd_seq_midi_event 3684 1 snd_seq_midi rt2x00lib 19101 2 rt2500usb,rt2x00usb led_class 1757 1 rt2x00lib mac80211 123574 2 rt2x00usb,rt2x00lib cfg80211 87661 2 rt2x00lib,mac80211 snd_rawmidi 12513 2 snd_mpu401_uart,snd_seq_midi rfkill 10264 3 bluetooth,cfg80211 snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event snd_timer 12258 2 snd_pcm,snd_seq snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq snd 34375 10 snd_via82xx,snd_ac97_codec,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device radeon 511184 2 ttm 33386 1 radeon drm_kms_helper 18309 1 radeon drm 112088 4 radeon,ttm,drm_kms_helper parport_pc 15799 1 i2c_viapro 4419 0 i2c_algo_bit 3497 1 radeon i2c_core 12696 5 radeon,drm_kms_helper,drm,i2c_viapro,i2c_algo_bit pcspkr 1207 0 evdev 5609 9 parport 22554 3 ppdev,lp,parport_pc soundcore 3450 1 snd psmouse 44657 0 processor 26327 1 button 3598 0 shpchp 21220 0 serio_raw 2916 0 pci_hotplug 18065 1 shpchp ext3 94212 1 jbd 32169 1 ext3 mbcache 3762 1 ext3 sg 15968 0 sr_mod 10770 0 sd_mod 25977 3 crc_t10dif 1012 1 sd_mod cdrom 26487 1 sr_mod ata_generic 2067 0 fan 2586 0 pata_via 5701 2 thermal 9206 0 uhci_hcd 16057 0 3c59x 25036 0 sata_via 5608 0 via_rhine 14627 0 ehci_hcd 27851 0 thermal_sys 9378 3 processor,fan,thermal libata 115753 3 ata_generic,pata_via,sata_via floppy 40923 0 mii 2714 2 3c59x,via_rhine usbcore 98453 5 rt2500usb,rt2x00usb,uhci_hcd,ehci_hcd nls_base 4541 1 usbcore scsi_mod 101429 4 sg,sr_mod,sd_mod,libata ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 #NetworkManager#iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:50:8d:62:d5:98 brd ff:ff:ff:ff:ff:ff 3: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:60:08:0f:1c:ec brd ff:ff:ff:ff:ff:ff 4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 00:11:d8:be:13:cd brd ff:ff:ff:ff:ff:ff inet6 fe80::211:d8ff:febe:13cd/64 scope link valid_lft forever preferred_lft forever 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 32:c4:e9:24:44:0d brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1492 22 0 0 0 0 0 0 1492 22 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 724 5 0 0 0 0 0 0 5454 23 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 25 total packets received 0 forwarded 0 incoming packets discarded 22 incoming packets delivered 22 requests sent out 96 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 1 active connections openings 1 passive connection openings 0 failed connection attempts 0 connection resets received 0 connections established 10 segments received 10 segments send out 0 segments retransmited 0 bad segments received. 0 resets sent Udp: 12 packets received 0 packets to unknown port received. 0 packet receive errors 12 packets sent UdpLite: TcpExt: 1 TCP sockets finished time wait in fast timer 0 packet headers predicted 3 acknowledgments not containing data payload received 1 predicted acknowledgments IpExt: InOctets: 1846 OutOctets: 1492 *** Device features: eth0: 0x0 eth1: 0x0 lo: 0x13865 pan0: 0xff3865 wlan0: 0x2000 ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 8 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Capabilities: <access denied> Kernel driver in use: agpgart-via 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: e8000000-e80fffff Prefetchable memory behind bridge: d0000000-dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905 100BaseTX [Boomerang] [10b7:9050] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at d200 [size=64] [virtual] Expansion ROM at 20000000 [disabled] [size=64K] Kernel driver in use: 3c59x 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) Subsystem: ABIT Computer Corp. KV7 [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at de00 [size=8] Region 1: I/O ports at e000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at ce00 [size=4] Region 4: I/O ports at d000 [size=16] Region 5: I/O ports at c000 [size=256] Capabilities: <access denied> Kernel driver in use: sata_via 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 20 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_via 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at d600 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at d800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at da00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at dc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI]) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 21 Region 0: Memory at e8111000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at c400 [size=256] Capabilities: <access denied> Kernel driver in use: VIA 82xx Audio 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) Subsystem: ABIT Computer Corp. Device [147b:1408] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at c800 [size=256] Region 1: Memory at e8110000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: via-rhine 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R200 QM [Radeon 9100] [1002:514d] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device [174b:7149] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at b000 [size=256] Region 2: Memory at e8020000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at e8000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0b05:1706 ASUSTek Computer, Inc. WL-167G v1 802.11g Adapter [Ralink RT2500USB] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.7 tools for generating an initramfs ii linux-base 2.6.32-30 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: ii firmware-linux-free 2.6.32-30 Binary firmware for various driver ii libc6-i686 2.11.2-9 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-686 suggests: ii grub 0.97-64 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.28 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: * linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
signature.asc
Description: This is a digitally signed message part
