Package: linux-2.6
Version: 2.6.32-29
Severity: normal
Tags: squeeze
Hi,
I wanted to start the GUI, but couldn't. After logging in, I usually say
'startx'. For this computer, which I have just installed, the command
resulted in the screen going blank, immediately followed by a hard reboot.
The problem appears to occur only with the entry in grub.cfg that I
marked below, but I only tried the first and the marked entry
(...XEN 4.0"):
--------------------------------------------- cut
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="4"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 97da3623-a193-4fe3-a9ce-13f91f9123fc
set locale_dir=($root)/grub/locale
set lang=en
insmod gettext
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### THE FOLLOWING ENTRY WORKS:
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-xen-686' --class debian
--class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 97da3623-a193-4fe3-a9ce-13f91f9123fc
echo 'Loading Linux 2.6.32-5-xen-686 ...'
linux /vmlinuz-2.6.32-5-xen-686 root=/dev/mapper/ev0-root ro quiet
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-xen-686
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-xen-686 (recovery mode)'
--class debian --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 97da3623-a193-4fe3-a9ce-13f91f9123fc
echo 'Loading Linux 2.6.32-5-xen-686 ...'
linux /vmlinuz-2.6.32-5-xen-686 root=/dev/mapper/ev0-root ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-xen-686
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-686' --class debian --class
gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 97da3623-a193-4fe3-a9ce-13f91f9123fc
echo 'Loading Linux 2.6.32-5-686 ...'
linux /vmlinuz-2.6.32-5-686 root=/dev/mapper/ev0-root ro quiet
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-686
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode)' --class
debian --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 97da3623-a193-4fe3-a9ce-13f91f9123fc
echo 'Loading Linux 2.6.32-5-686 ...'
linux /vmlinuz-2.6.32-5-686 root=/dev/mapper/ev0-root ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-686
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### THE FOLLOWING ENTRY CAUSES THE CRASH:
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-xen-686 and XEN 4.0-i386'
--class debian --class gnu-linux --class gnu --class os --class xen {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 97da3623-a193-4fe3-a9ce-13f91f9123fc
echo 'Loading Linux 2.6.32-5-xen-686 ...'
multiboot /xen-4.0-i386.gz placeholder
module /vmlinuz-2.6.32-5-xen-686 placeholder root=/dev/mapper/ev0-root
ro quiet
echo 'Loading initial ramdisk ...'
module /initrd.img-2.6.32-5-xen-686
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-xen-686 and XEN 4.0-i386
(recovery mode)' --class debian --class gnu-linux --class gnu --class os
--class xen {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 97da3623-a193-4fe3-a9ce-13f91f9123fc
echo 'Loading Linux 2.6.32-5-xen-686 ...'
multiboot /xen-4.0-i386.gz placeholder
module /vmlinuz-2.6.32-5-xen-686 placeholder root=/dev/mapper/ev0-root
ro single
echo 'Loading initial ramdisk ...'
module /initrd.img-2.6.32-5-xen-686
}
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------- cut
I have the following packages, which are related to XEN, installed:
$ dpkg -l '*xen*' |grep ^ii
ii libc6-xen 2.11.2-7
Embedded GNU C Library: Shared libraries [Xen version]
ii libxenstore3.0 4.0.1-1
Xenstore communications library for Xen
ii linux-image-2.6.32-5-xen-686 2.6.32-29
Linux 2.6.32 for modern PCs, Xen dom0 support
ii xen-hypervisor-4.0-i386 4.0.1-1
The Xen Hypervisor on i386
ii xen-linux-system-2.6.32-5-xen-686 2.6.32-29
Xen system with Linux 2.6.32 on modern PCs (meta-package)
ii xen-utils-4.0 4.0.1-1
XEN administrative tools
ii xen-utils-common 4.0.0-1
XEN administrative tools - common files
ii xenstore-utils 4.0.1-1
Xenstore utilities for Xen
FWIW, on a different pre-Squeeze machine, I have no trouble running X
after booting this entry:
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-xen-686 and XEN 4.0-amd64'
--class debian --class gnu-linux --class gnu --class os --class xen {
insmod raid
insmod mdraid
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(md0)'
search --no-floppy --fs-uuid --set dd88a909-503e-4bba-82fb-6c8a6293a842
echo 'Loading Linux 2.6.32-5-xen-686 ...'
multiboot /xen-4.0-amd64.gz placeholder
module /vmlinuz-2.6.32-5-xen-686 placeholder root=/dev/mapper/ev0-root
ro root=/dev/mapper/ev0-root ro
echo 'Loading initial ramdisk ...'
module /initrd.img-2.6.32-5-xen-686
}
Kind regards,
--Toni++
-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-686 (Debian 2.6.32-29) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 20:52:42 UTC 2010
** Command line:
placeholder root=/dev/mapper/ev0-root ro quiet
** Not tainted
** Kernel log:
[ 61.162673] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 61.162818] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 61.663123] EXT3 FS on dm-1, internal journal
[ 61.922775] loop: module loaded
[ 62.536358] Adding 7811064k swap on /dev/mapper/ev0-swap. Priority:-1
extents:1 across:7811064k
[ 67.017451] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 67.259292] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input14
[ 68.122711] kjournald starting. Commit interval 5 seconds
[ 68.122915] EXT3 FS on sda1, internal journal
[ 68.122934] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.232601] kjournald starting. Commit interval 5 seconds
[ 68.236331] EXT3 FS on dm-7, internal journal
[ 68.236350] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.298764] kjournald starting. Commit interval 5 seconds
[ 68.300330] EXT3 FS on dm-6, internal journal
[ 68.300348] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.361256] kjournald starting. Commit interval 5 seconds
[ 68.364327] EXT3 FS on dm-5, internal journal
[ 68.364345] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.404636] kjournald starting. Commit interval 5 seconds
[ 68.408322] EXT3 FS on dm-3, internal journal
[ 68.408340] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.448641] kjournald starting. Commit interval 5 seconds
[ 68.452325] EXT3 FS on dm-4, internal journal
[ 68.452343] EXT3-fs: mounted filesystem with ordered data mode.
[ 70.591228] fuse init (API version 7.13)
[ 71.611217] NET: Registered protocol family 15
[ 71.619145] alg: No test for cipher_null (cipher_null-generic)
[ 71.619300] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 71.619448] alg: No test for digest_null (digest_null-generic)
[ 71.619562] alg: No test for compress_null (compress_null-generic)
[ 71.669281] padlock: VIA PadLock Hash Engine not detected.
[ 72.477710] Event-channel device installed.
[ 72.979838] Initializing XFRM netlink socket
[ 72.993180] XENBUS: Unable to read cpu state
[ 72.993314] XENBUS: Unable to read cpu state
[ 73.126176] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input15
[ 76.194542] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 76.198613] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 76.259215] iwlagn 0000:03:00.0: iwlwifi-5000-2.ucode firmware file req
failed: -2
[ 76.262774] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 76.279269] iwlagn 0000:03:00.0: iwlwifi-5000-1.ucode firmware file req
failed: -2
[ 76.280016] iwlagn 0000:03:00.0: Could not read microcode: -2
[ 76.510751] apm: BIOS not found.
[ 76.525692] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 76.538837] iwlagn 0000:03:00.0: iwlwifi-5000-2.ucode firmware file req
failed: -2
[ 76.540561] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 76.545847] iwlagn 0000:03:00.0: iwlwifi-5000-1.ucode firmware file req
failed: -2
[ 76.547532] iwlagn 0000:03:00.0: Could not read microcode: -2
[ 77.269032] Bluetooth: L2CAP ver 2.14
[ 77.269042] Bluetooth: L2CAP socket layer initialized
[ 77.312618] Bluetooth: RFCOMM TTY layer initialized
[ 77.312633] Bluetooth: RFCOMM socket layer initialized
[ 77.312643] Bluetooth: RFCOMM ver 1.11
[ 77.358012] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 77.358016] Bluetooth: BNEP filters: protocol multicast
[ 77.517118] Bridge firewalling registered
[ 77.575166] Bluetooth: SCO (Voice Link) ver 0.6
[ 77.575172] Bluetooth: SCO socket layer initialized
[ 77.800852] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
[ 77.800866] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 77.801395] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 88.580070] eth0: no IPv6 routers present
[ 279.774306] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 279.778943] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 279.789208] iwlagn 0000:03:00.0: iwlwifi-5000-2.ucode firmware file req
failed: -2
[ 279.791025] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 279.798929] iwlagn 0000:03:00.0: iwlwifi-5000-1.ucode firmware file req
failed: -2
[ 279.799523] iwlagn 0000:03:00.0: Could not read microcode: -2
[ 279.801847] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 279.805815] iwlagn 0000:03:00.0: iwlwifi-5000-2.ucode firmware file req
failed: -2
[ 279.806459] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 279.810639] iwlagn 0000:03:00.0: iwlwifi-5000-1.ucode firmware file req
failed: -2
[ 279.811253] iwlagn 0000:03:00.0: Could not read microcode: -2
[ 279.812627] ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 281.360925] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
[ 281.360939] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 281.361463] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 291.421106] eth0: no IPv6 routers present
[ 323.473486] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 325.168920] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
[ 325.168933] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 325.169451] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 335.440077] eth0: no IPv6 routers present
[ 1132.417254] CPU0 attaching NULL sched-domain.
[ 1132.417259] CPU1 attaching NULL sched-domain.
[ 1132.445216] CPU0 attaching sched-domain:
[ 1132.445229] domain 0: span 0-1 level CPU
[ 1132.445246] groups: 0 1
[ 1132.445276] CPU1 attaching sched-domain:
[ 1132.445286] domain 0: span 0-1 level CPU
[ 1132.445301] groups: 1 0
[ 1132.561164] CPU0 attaching NULL sched-domain.
[ 1132.561169] CPU1 attaching NULL sched-domain.
[ 1132.585279] CPU0 attaching sched-domain:
[ 1132.585291] domain 0: span 0-1 level CPU
[ 1132.585306] groups: 0 1
[ 1132.585336] CPU1 attaching sched-domain:
[ 1132.585347] domain 0: span 0-1 level CPU
[ 1132.585361] groups: 1 0
** Model information
not available
** Loaded modules:
Module Size Used by
cpufreq_stats 1940 0
cpufreq_userspace 1476 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
sco 5857 2
bridge 33031 0
stp 996 1 bridge
bnep 7460 2
rfcomm 25171 8
l2cap 21705 16 bnep,rfcomm
crc16 1027 1 l2cap
xfrm_user 16166 4
xfrm4_tunnel 1201 0
tunnel4 1469 1 xfrm4_tunnel
ipcomp 1356 0
xfrm_ipcomp 2923 1 ipcomp
esp4 4053 0
ah4 3079 0
xen_evtchn 3471 1
xenfs 7248 1
binfmt_misc 4907 1
uinput 4796 1
deflate 1315 0
zlib_deflate 15822 1 deflate
ctr 2703 0
twofish 5665 0
twofish_common 12560 1 twofish
camellia 16843 0
serpent 16187 0
blowfish 7252 0
cast5 15593 0
des_generic 15027 0
xcbc 1925 0
rmd160 9448 0
sha1_generic 1395 0
hmac 2033 0
crypto_null 1876 0
af_key 23386 0
fuse 43937 1
loop 9761 0
firewire_sbp2 9708 0
snd_hda_codec_conexant 16345 1
joydev 6739 0
snd_hda_intel 16871 0
snd_hda_codec 46002 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
arc4 974 2
snd_mixer_oss 10461 1 snd_pcm_oss
ecb 1405 2
radeon 537808 0
snd_pcm 47402 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12513 1 snd_seq_midi
pcmcia 16286 0
snd_seq_midi_event 3684 1 snd_seq_midi
iwlagn 63639 0
snd_seq 35459 2 snd_seq_midi,snd_seq_midi_event
zaurus 1880 0
iwlcore 67698 1 iwlagn
ttm 33490 1 radeon
snd_timer 12258 2 snd_pcm,snd_seq
i915 222608 1
uvcvideo 45546 0
cdc_ether 2633 1 zaurus
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
yenta_socket 16511 1
usbnet 9539 2 zaurus,cdc_ether
drm_kms_helper 18305 2 radeon,i915
mac80211 123586 2 iwlagn,iwlcore
psmouse 44653 0
videodev 25541 1 uvcvideo
btusb 8081 2
pcspkr 1207 0
snd 34375 11
snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
rsrc_nonstatic 7413 1 yenta_socket
drm 113422 4 radeon,ttm,i915,drm_kms_helper
v4l1_compat 10250 2 uvcvideo,videodev
mii 2714 1 usbnet
cdc_wdm 6488 0
cdc_acm 12562 0
evdev 5609 8
pcmcia_core 20478 3 pcmcia,yenta_socket,rsrc_nonstatic
serio_raw 2916 0
soundcore 3450 1 snd
thinkpad_acpi 41971 0
cfg80211 87637 3 iwlagn,iwlcore,mac80211
bluetooth 36319 9 sco,bnep,rfcomm,l2cap,btusb
i2c_i801 6466 0
snd_page_alloc 5109 2 snd_hda_intel,snd_pcm
rfkill 10260 4 thinkpad_acpi,cfg80211,bluetooth
nvram 3985 1 thinkpad_acpi
i2c_algo_bit 3497 2 radeon,i915
i2c_core 12696 7
radeon,i915,drm_kms_helper,videodev,drm,i2c_i801,i2c_algo_bit
ac 1640 0
battery 3782 0
video 14605 1 i915
output 1204 1 video
wmi 3575 0
processor 30865 0
button 3598 1 i915
acpi_processor 3623 1 processor,[permanent]
ext3 94196 7
jbd 32161 1 ext3
mbcache 3762 1 ext3
sha256_generic 10748 2
aes_i586 6816 2
aes_generic 25738 1 aes_i586
cbc 2047 1
dm_crypt 9264 1
dm_mod 46074 24 dm_crypt
sg 15972 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25973 3
crc_t10dif 1012 1 sd_mod
uhci_hcd 16141 0
ahci 27286 2
sdhci_pci 4541 0
sdhci 12291 1 sdhci_pci
libata 116053 1 ahci
ricoh_mmc 2561 0
firewire_ohci 16997 0
firewire_core 31267 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
mmc_core 38665 1 sdhci
led_class 1757 3 iwlcore,thinkpad_acpi,sdhci
ehci_hcd 28255 0
scsi_mod 101417 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
e1000e 98161 0
usbcore 98793 10
zaurus,uvcvideo,cdc_ether,usbnet,btusb,cdc_wdm,cdc_acm,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal 9206 0
thermal_sys 9378 3 video,processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: Lenovo Device [17aa:20e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI
Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: bff00000-bfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device [17aa:2115]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1514
Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series
Chipset MEI Controller [8086:2a44] (rev 07)
Subsystem: Lenovo Device [17aa:20e6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc226800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network
Connection [8086:10f5] (rev 03)
Subsystem: Lenovo Device [17aa:20ee]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1516
Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc225000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:20f1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fc226c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: Lenovo Device [17aa:20f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: a0000000-a01fffff
Prefetchable memory behind bridge: 00000000a0200000-00000000a03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f4200000-f42fffff
Prefetchable memory behind bridge: 00000000a0400000-00000000a05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4300000-f43fffff
Prefetchable memory behind bridge: 00000000a0600000-00000000a07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:20f0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:20f1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00006000-00009fff
Memory behind bridge: f4800000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller
[8086:2917] (rev 03)
Subsystem: Lenovo Device [17aa:20f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI
Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:20f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 1515
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fc226000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 03)
Subsystem: Lenovo Device [17aa:20f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc227400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon
HD 3650 [1002:9591] (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:2116]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at bfff0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at bff00000 [disabled] [size=128K]
Capabilities: <access denied>
03:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300
[8086:4236]
Subsystem: Intel Corporation Device [8086:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1513
Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
04:00.0 Memory controller [0580]: Intel Corporation Turbo Memory Controller
[8086:444e] (rev 11)
Subsystem: Intel Corporation Device [8086:4443]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4300000 (32-bit, non-prefetchable) [size=1K]
Region 2: I/O ports at 3000 [size=256]
[virtual] Expansion ROM at a0600000 [disabled] [size=64K]
Capabilities: <access denied>
15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Lenovo Device [17aa:20c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: a4000000-a7fff000
I/O window 0: 00006000-000060ff
I/O window 1: 00006400-000064ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:20c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 21)
Subsystem: Lenovo Device [17aa:20c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4801800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
15:00.3 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller
[1180:0843] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: ricoh-mmc
15:00.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 11)
Subsystem: Lenovo ThinkPad T61 [17aa:20ca]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f4802000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
15:00.5 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev 11)
Subsystem: Lenovo Device [17aa:20cb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f4802400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
** USB devices:
Bus 008 Device 002: ID 17ef:1003 Lenovo Integrated Smart Card Reader
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp. Bluetooth with Enhanced Data
Rate II
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0bdb:1900 Ericsson Business Mobile Networks BV F3507g
Mobile Broadband Module
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 17ef:4807 Lenovo UVC Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-xen-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-xen-686 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools 0.98.5 tools for generating an initramfs
ii linux-base 2.6.32-29 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-xen-686 recommends:
ii firmware-linux-free 2.6.32-29 Binary firmware for various driver
ii libc6-xen 2.11.2-7 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-xen-686 suggests:
pn grub <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-xen-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
ii xen-hypervisor-4.0-i386 [xen- 4.0.1-1 The Xen Hypervisor on i386
-- debconf information:
linux-image-2.6.32-5-xen-686/postinst/depmod-error-initrd-2.6.32-5-xen-686:
false
linux-image-2.6.32-5-xen-686/prerm/removing-running-kernel-2.6.32-5-xen-686:
true
linux-image-2.6.32-5-xen-686/postinst/missing-firmware-2.6.32-5-xen-686:
linux-image-2.6.32-5-xen-686/postinst/ignoring-do-bootloader-2.6.32-5-xen-686:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20101219153336.13812.qm...@oak.oeko.net
