Andreas,
In case this helps, I am running the same kernel, but an older ATI hw
(ATI Mobility Radeon HD 3870 X2), however it's a newer driver (couple of
weeks old TOT from git):
II) Loading /opt/xorg/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.13.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
and this all is fine, in fact including most GL stuff.
-- Pat.
On Mon, 2010-12-06 at 13:16 +0100, art1 wrote:
> Package: linux-2.6
> Version: 2.6.32-28
> Severity: important
>
> Hello,
>
> If I am using kernel-image 2.6.32-5-amd64 the X server does not start
> correctly, the screen will be black and mouse and keyboard does not work
> anymore. The system could be shutdown using power-button. I am using standard
> radeon-driver (xorg-driver).
>
> In the /var/log/message I could find ff. entries:
>
> ------------- 8>< ----- 8>< ----------------
> Dec 6 12:58:17 art1 kernel: [ 49.730076] pci 0000:01:00.0: PCI INT A
> -> GSI 18 (level, low) -> IRQ 18
> Dec 6 12:58:17 art1 kernel: [ 49.826563] [drm] Initialized drm 1.1.0
> 20060810Dec 6 12:58:17 art1 kernel: [ 49.908767] [drm] radeon kernel
> modesetting enabled.
> Dec 6 12:58:17 art1 kernel: [ 49.914748] [drm] radeon: Initializing
> kernel modesetting.
> Dec 6 12:58:17 art1 kernel: [ 49.914913] [drm] register mmio base:
> 0xFDFE0000Dec 6 12:58:17 art1 kernel: [ 49.914918] [drm] register
> mmio size: 65536
> Dec 6 12:58:17 art1 kernel: [ 49.918927] ATOM BIOS: 11X
> Dec 6 12:58:17 art1 kernel: [ 49.918967] [drm] Clocks initialized !
> Dec 6 12:58:17 art1 kernel: [ 49.919362] [drm] Detected VRAM
> RAM=256M, BAR=256M
> Dec 6 12:58:17 art1 kernel: [ 49.919371] [drm] RAM width 64bits DDR
> Dec 6 12:58:17 art1 kernel: [ 49.919637] [TTM] Zone kernel:
> Available graphics memory: 1029290 kiB.
> Dec 6 12:58:17 art1 kernel: [ 49.919673] [drm] radeon: 256M of VRAM
> memory ready
> Dec 6 12:58:17 art1 kernel: [ 49.919677] [drm] radeon: 512M of GTT
> memory ready.
> Dec 6 12:58:17 art1 kernel: [ 49.919781] radeon 0000:01:00.0: radeon:
> using MSI.
> Dec 6 12:58:17 art1 kernel: [ 49.919834] [drm] radeon: irq
> initialized.
> Dec 6 12:58:17 art1 kernel: [ 49.919840] [drm] GART: num cpu pages
> 131072, num gpu pages 131072
> Dec 6 12:58:17 art1 kernel: [ 49.921722] [drm] Loading RV710
> Microcode
> Dec 6 12:58:17 art1 kernel: [ 49.922074] platform radeon_cp.0:
> firmware: requesting radeon/RV710_pfp.bin
> Dec 6 12:58:17 art1 kernel: [ 49.952955] platform radeon_cp.0:
> firmware: requesting radeon/RV710_me.bin
> Dec 6 12:58:17 art1 kernel: [ 49.965756] platform radeon_cp.0:
> firmware: requesting radeon/R700_rlc.bin
> Dec 6 12:58:18 art1 kernel: [ 50.025730] [drm] ring test succeeded in
> 1 usecsDec 6 12:58:18 art1 kernel: [ 50.026019] [drm] radeon: ib pool
> ready.
> Dec 6 12:58:18 art1 kernel: [ 50.026166] [drm] ib test succeeded in 0
> usecs
> Dec 6 12:58:18 art1 kernel: [ 50.026623] [drm] Radeon Display
> Connectors
> Dec 6 12:58:18 art1 kernel: [ 50.026627] [drm] Connector 0:
> Dec 6 12:58:18 art1 kernel: [ 50.026630] [drm] VGA
> Dec 6 12:58:18 art1 kernel: [ 50.026636] [drm] DDC: 0x7e40 0x7e40
> 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
> Dec 6 12:58:18 art1 kernel: [ 50.026640] [drm] Encoders:
> Dec 6 12:58:18 art1 kernel: [ 50.026643] [drm] CRT2:
> INTERNAL_KLDSCP_DAC2Dec 6 12:58:18 art1 kernel: [ 50.026647] [drm]
> Connector 1:
> Dec 6 12:58:18 art1 kernel: [ 50.026650] [drm] HDMI-A
> Dec 6 12:58:18 art1 kernel: [ 50.026652] [drm] HPD1
> Dec 6 12:58:18 art1 kernel: [ 50.026657] [drm] DDC: 0x7e50 0x7e50
> 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
> Dec 6 12:58:18 art1 kernel: [ 50.026661] [drm] Encoders:
> Dec 6 12:58:18 art1 kernel: [ 50.026664] [drm] DFP1:
> INTERNAL_UNIPHY
> Dec 6 12:58:18 art1 kernel: [ 50.026667] [drm] Connector 2:
> Dec 6 12:58:18 art1 kernel: [ 50.026670] [drm] DVI-I
> Dec 6 12:58:18 art1 kernel: [ 50.026673] [drm] HPD4
> Dec 6 12:58:18 art1 kernel: [ 50.026678] [drm] DDC: 0x7f10 0x7f10
> 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
> Dec 6 12:58:18 art1 kernel: [ 50.026682] [drm] Encoders:
> Dec 6 12:58:18 art1 kernel: [ 50.026685] [drm] CRT1:
> INTERNAL_KLDSCP_DAC1Dec 6 12:58:18 art1 kernel: [ 50.026688] [drm]
> DFP2: INTERNAL_UNIPHY2
> Dec 6 12:58:18 art1 kernel: [ 50.152421] composite sync not supported
> Dec 6 12:58:18 art1 kernel: [ 50.165599] [drm] fb mappable at
> 0xD0142000
> Dec 6 12:58:18 art1 kernel: [ 50.165601] [drm] vram apper at
> 0xD0000000
> Dec 6 12:58:18 art1 kernel: [ 50.165603] [drm] size 3145728
> Dec 6 12:58:18 art1 kernel: [ 50.165604] [drm] fb depth is 24
> Dec 6 12:58:18 art1 kernel: [ 50.165605] [drm] pitch is 4096
> Dec 6 12:58:18 art1 kernel: [ 50.165823] Console: switching to colour
> frame buffer device 128x48
> Dec 6 12:58:18 art1 kernel: [ 50.165829] fb0: radeondrmfb frame
> buffer deviceDec 6 12:58:18 art1 kernel: [ 50.165831] registered
> panic notifier
> Dec 6 12:58:18 art1 kernel: [ 50.165835] [drm] Initialized radeon
> 2.0.0 20080528 for 0000:01:00.0 on minor 0
> ------------- ><8 ----- ><8 ----------------
>
> The Xorg.log will be attached, too.
>
> The problem does not occur with kernel 2.6.30-2-amd64. Therefore I think
> it could be related to kernel-mode switching.
>
> Any hints to track the problem down?
>
> Bye Andreas
>
> -- Package-specific info:
> ** Version:
> Linux version 2.6.32-5-amd64 (Debian 2.6.32-28) (b...@decadent.org.uk) (gcc
> version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 25 18:02:11 UTC 2010
>
> ** Command line:
> BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64
> root=UUID=92d00b1e-19a0-4993-ab2a-1a685308ddc3 ro quiet
>
> ** Not tainted
>
> ** Kernel log:
> [ 8.200370] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 8.283342] usb 2-1: New USB device found, idVendor=046a, idProduct=0001
> [ 8.283346] usb 2-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 8.283448] usb 2-1: configuration #1 chosen from 1 choice
> [ 8.304790] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
> [ 8.304925] sr 3:0:0:0: Attached scsi CD-ROM sr1
> [ 8.548280] usb 2-2: new low speed USB device using ohci_hcd and address 3
> [ 8.691587] input: HDA Digital PCBeep as
> /devices/pci0000:00/0000:00:14.2/input/input4
> [ 8.695229] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) ->
> IRQ 19
> [ 8.695260] HDA Intel 0000:01:00.1: setting latency timer to 64
> [ 8.721350] usb 2-2: New USB device found, idVendor=046d, idProduct=c03e
> [ 8.721353] usb 2-2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 8.721356] usb 2-2: Product: USB-PS/2 Optical Mouse
> [ 8.721357] usb 2-2: Manufacturer: Logitech
> [ 8.721449] usb 2-2: configuration #1 chosen from 1 choice
> [ 8.776322] msp3400 1-0040: MSP3415G-B8 found @ 0x80 (ivtv i2c driver #0)
> [ 8.776325] msp3400 1-0040: msp3400 supports nicam and radio, mode is
> autodetect and autoselect
> [ 8.867267] usbcore: registered new interface driver hiddev
> [ 8.872647] input: HID 046a:0001 as
> /devices/pci0000:00/0000:00:12.0/usb2/2-1/2-1:1.0/input/input5
> [ 8.872728] generic-usb 0003:046A:0001.0001: input,hidraw0: USB HID v1.00
> Keyboard [HID 046a:0001] on usb-0000:00:12.0-1/input0
> [ 8.874687] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> [ 8.877637] input: Logitech USB-PS/2 Optical Mouse as
> /devices/pci0000:00/0000:00:12.0/usb2/2-2/2-2:1.0/input/input6
> [ 8.877750] generic-usb 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10
> Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2/input0
> [ 8.877777] usbcore: registered new interface driver usbhid
> [ 8.877780] usbhid: v2.6:USB HID core driver
> [ 8.955048] tuner-simple 1-0061: creating new instance
> [ 8.955052] tuner-simple 1-0061: type set to 14 (Temic PAL_BG (4006FH5))
> [ 8.956130] IRQ 20/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs
> [ 8.956464] ivtv0: Registered device video0 for encoder MPG (4096 kB)
> [ 8.956488] ivtv0: Registered device video32 for encoder YUV (2048 kB)
> [ 8.956514] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
> [ 8.956537] ivtv0: Registered device video24 for encoder PCM (320 kB)
> [ 8.956539] ivtv0: Initialized card: Hauppauge WinTV PVR-250
> [ 8.956575] ivtv: End initialization
> [ 8.984276] usb 2-3: new low speed USB device using ohci_hcd and address 4
> [ 9.160384] usb 2-3: New USB device found, idVendor=1a34, idProduct=0806
> [ 9.160387] usb 2-3: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 9.160390] usb 2-3: Product: HAMA X-Style Pad
> [ 9.160391] usb 2-3: Manufacturer: ACRUX
> [ 9.160498] usb 2-3: configuration #1 chosen from 1 choice
> [ 9.176480] input: ACRUX HAMA X-Style Pad as
> /devices/pci0000:00/0000:00:12.0/usb2/2-3/2-3:1.0/input/input7
> [ 9.176569] generic-usb 0003:1A34:0806.0003: input,hidraw2: USB HID v1.00
> Joystick [ACRUX HAMA X-Style Pad] on usb-0000:00:12.0-3/input0
> [ 9.732021] ivtv 0000:03:06.0: firmware: requesting v4l-cx2341x-enc.fw
> [ 9.824153] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> [ 10.020206] ivtv0: Encoder revision: 0x02060039
> [ 10.617123] Adding 1004020k swap on /dev/sdc1. Priority:-1 extents:1
> across:1004020k
> [ 10.665883] Adding 1951856k swap on /dev/sda7. Priority:-2 extents:1
> across:1951856k
> [ 11.571942] EXT3 FS on sda5, internal journal
> [ 11.637803] loop: module loaded
> [ 18.059019] kjournald starting. Commit interval 5 seconds
> [ 18.059261] EXT3 FS on sda2, internal journal
> [ 18.059266] EXT3-fs: mounted filesystem with ordered data mode.
> [ 18.147610] kjournald starting. Commit interval 5 seconds
> [ 18.147832] EXT3 FS on sda6, internal journal
> [ 18.147836] EXT3-fs: mounted filesystem with ordered data mode.
> [ 18.234151] kjournald starting. Commit interval 5 seconds
> [ 18.234384] EXT3 FS on sda9, internal journal
> [ 18.234387] EXT3-fs: mounted filesystem with ordered data mode.
> [ 18.587849] FAT: utf8 is not a recommended IO charset for FAT filesystems,
> filesystem will be case sensitive!
> [ 20.766839] r8169: eth0: link up
> [ 20.766850] r8169: eth0: link up
> [ 22.942400] RPC: Registered udp transport module.
> [ 22.942403] RPC: Registered tcp transport module.
> [ 22.942404] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 22.989760] Slow work thread pool: Starting up
> [ 22.989823] Slow work thread pool: Ready
> [ 22.989885] FS-Cache: Loaded
> [ 23.028783] FS-Cache: Netfs 'nfs' registered for caching
> [ 23.066188] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
> [ 23.463243] fuse init (API version 7.13)
> [ 24.216298] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
> recovery directory
> [ 24.223759] NFSD: starting 90-second grace period
> [ 24.226225] svc: failed to register lockdv1 RPC service (errno 97).
> [ 25.222541] input: ACPI Virtual Keyboard Device as
> /devices/virtual/input/input8
> [ 29.575478] Bluetooth: Core ver 2.15
> [ 29.575556] NET: Registered protocol family 31
> [ 29.575557] Bluetooth: HCI device and connection manager initialized
> [ 29.575561] Bluetooth: HCI socket layer initialized
> [ 29.604195] Bluetooth: L2CAP ver 2.14
> [ 29.604198] Bluetooth: L2CAP socket layer initialized
> [ 29.619255] Bluetooth: RFCOMM TTY layer initialized
> [ 29.619260] Bluetooth: RFCOMM socket layer initialized
> [ 29.619262] Bluetooth: RFCOMM ver 1.11
> [ 29.658576] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 29.658579] Bluetooth: BNEP filters: protocol multicast
> [ 29.682809] Bridge firewalling registered
> [ 29.706340] Bluetooth: SCO (Voice Link) ver 0.6
> [ 29.706343] Bluetooth: SCO socket layer initialized
> [ 29.910616] lp0: using parport0 (interrupt-driven).
> [ 29.973038] ppdev: user-space parallel port driver
> [ 30.700148] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
> 5200+ processors (2 cpu cores) (version 2.20.00)
> [ 30.700217] powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0xa
> [ 30.700219] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xb
> [ 30.700221] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xd
> [ 30.700223] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xf
> [ 30.700225] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x11
> [ 30.700226] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x11
> [ 30.700228] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
> [ 31.004273] Clocksource tsc unstable (delta = -165721690 ns)
> [ 31.388018] eth0: no IPv6 routers present
>
> ** Model information
> sys_vendor: Gigabyte Technology Co., Ltd.
> product_name: GA-MA74GM-S2H
> product_version:
> chassis_vendor: Gigabyte Technology Co., Ltd.
> chassis_version:
> bios_vendor: Award Software International, Inc.
> bios_version: FEb
> board_vendor: Gigabyte Technology Co., Ltd.
> board_name: GA-MA74GM-S2H
> board_version: x.x
>
> ** Loaded modules:
> Module Size Used by
> powernow_k8 10978 1
> cpufreq_conservative 5162 0
> cpufreq_powersave 902 0
> cpufreq_stats 2659 0
> cpufreq_userspace 1992 0
> ppdev 5030 0
> lp 7462 0
> sco 7209 2
> bridge 39630 0
> stp 1440 1 bridge
> bnep 9427 2
> rfcomm 29597 0
> l2cap 24736 6 bnep,rfcomm
> crc16 1319 1 l2cap
> bluetooth 41827 6 sco,bnep,rfcomm,l2cap
> rfkill 13044 2 bluetooth
> binfmt_misc 6431 1
> uinput 6376 1
> fuse 50273 1
> nfsd 254118 13
> exportfs 3170 1 nfsd
> nfs 241050 0
> lockd 57603 2 nfsd,nfs
> fscache 29834 1 nfs
> nfs_acl 2031 2 nfsd,nfs
> auth_rpcgss 33476 2 nfsd,nfs
> sunrpc 161493 11 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
> nls_utf8 1208 1
> nls_cp437 5817 1
> vfat 7884 1
> fat 40038 1 vfat
> loop 11799 0
> joydev 8459 0
> tuner_simple 10806 1
> tuner_types 10601 1 tuner_simple
> tuner 16140 1
> usbhid 33292 0
> hid 63145 1 usbhid
> snd_hda_codec_atihdmi 2251 1
> msp3400 23176 1
> snd_hda_codec_realtek 235538 1
> snd_hda_intel 19987 0
> snd_hda_codec 54244 3
> snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
> snd_hwdep 5380 1 snd_hda_codec
> saa7115 11369 1
> snd_pcm_oss 32591 0
> snd_mixer_oss 12606 1 snd_pcm_oss
> ivtv 122239 0
> snd_pcm 60503 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_seq_midi 4400 0
> i2c_algo_bit 4225 1 ivtv
> snd_rawmidi 15515 1 snd_seq_midi
> snd_seq_midi_event 4628 1 snd_seq_midi
> snd_seq 42881 3 snd_seq_midi,snd_seq_midi_event
> cx2341x 9441 1 ivtv
> v4l2_common 11720 5 tuner,msp3400,saa7115,ivtv,cx2341x
> videodev 29993 5 tuner,msp3400,saa7115,ivtv,v4l2_common
> v4l1_compat 11442 1 videodev
> snd_timer 15582 2 snd_pcm,snd_seq
> snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
> r8169 28925 0
> i2c_piix4 8328 0
> v4l2_compat_ioctl32 8474 1 videodev
> ata_generic 3015 0
> snd 46446 12
> snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> tveeprom 12057 1 ivtv
> ohci_hcd 19212 0
> ehci_hcd 31135 0
> i2c_core 15712 10
> tuner_simple,tuner,msp3400,saa7115,ivtv,i2c_algo_bit,v4l2_common,videodev,i2c_piix4,tveeprom
> k8temp 3283 0
> usbcore 122034 4 usbhid,ohci_hcd,ehci_hcd
> sg 18744 0
> mii 3210 1 r8169
> edac_core 29261 0
> pata_atiixp 3489 2
> sr_mod 12602 0
> edac_mce_amd 6433 0
> soundcore 4598 1 snd
> nls_base 6377 5 nls_utf8,nls_cp437,vfat,fat,usbcore
> snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
> floppy 49087 0
> cdrom 29415 1 sr_mod
> evdev 7352 7
> pcspkr 1699 0
> parport_pc 18855 1
> parport 27954 3 ppdev,lp,parport_pc
> serio_raw 3752 0
> button 4650 0
> processor 29935 1 powernow_k8
> ext3 106518 4
> jbd 37085 1 ext3
> mbcache 5050 1 ext3
> sd_mod 29889 9
> crc_t10dif 1276 1 sd_mod
> ahci 32374 7
> libata 133616 3 ata_generic,pata_atiixp,ahci
> thermal 11674 0
> thermal_sys 11942 2 processor,thermal
> scsi_mod 122149 4 sg,sr_mod,sd_mod,libata
>
> ** Network interface configuration:
> auto lo eth0 wlan0
>
> iface lo inet loopback
>
> iface eth0 inet static
> address 192.168.2.2
> netmask 255.255.255.0
> network 192.168.2.0
> broadcast 192.168.2.255
> gateway 192.168.2.1
> dns-nameservers 195.50.140.114 195.50.140.252 192.168.2.1 145.253.2.11
> 145.253.2.75
>
> iface wlan0 inet dhcp
> wpa-ssid "Arcor-D2C652"
> wpa-psk ***********
>
> ** Network status:
> *** IP interfaces and addresses:
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> UNKNOWN qlen 1000
> link/ether 00:24:1d:8f:30:17 brd ff:ff:ff:ff:ff:ff
> inet 192.168.2.2/24 brd 192.168.2.255 scope global eth0
> inet6 fe80::224:1dff:fe8f:3017/64 scope link
> valid_lft forever preferred_lft forever
> 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
> link/ether 7e:48:e0:90:6e:23 brd ff:ff:ff:ff:ff:ff
>
> *** Device statistics:
> Inter-| Receive | Transmit
> face |bytes packets errs drop fifo frame compressed multicast|bytes
> packets errs drop fifo colls carrier compressed
> lo: 12735 164 0 0 0 0 0 0 12735
> 164 0 0 0 0 0 0
> eth0: 16460 123 0 0 0 0 0 0 18631
> 175 0 0 0 0 0 0
> pan0: 0 0 0 0 0 0 0 0 0
> 0 0 0 0 0 0 0
>
> *** Protocol statistics:
> Ip:
> 297 total packets received
> 0 forwarded
> 0 incoming packets discarded
> 297 incoming packets delivered
> 317 requests sent out
> Icmp:
> 6 ICMP messages received
> 0 input ICMP message failed.
> ICMP input histogram:
> destination unreachable: 2
> echo replies: 4
> 22 ICMP messages sent
> 0 ICMP messages failed
> ICMP output histogram:
> destination unreachable: 18
> echo request: 4
> IcmpMsg:
> InType0: 4
> InType3: 2
> OutType3: 18
> OutType8: 4
> Tcp:
> 9 active connections openings
> 0 passive connection openings
> 6 failed connection attempts
> 0 connection resets received
> 0 connections established
> 27 segments received
> 29 segments send out
> 0 segments retransmited
> 0 bad segments received.
> 7 resets sent
> Udp:
> 230 packets received
> 18 packets to unknown port received.
> 0 packet receive errors
> 248 packets sent
> UdpLite:
> TcpExt:
> 2 TCP sockets finished time wait in fast timer
> 3 packet headers predicted
> 6 acknowledgments not containing data payload received
> IpExt:
> InMcastPkts: 28
> OutMcastPkts: 30
> InOctets: 29884
> OutOctets: 25931
> InMcastOctets: 3079
> OutMcastOctets: 3223
>
> *** Device features:
> eth0: 0x180
> lo: 0x13865
> pan0: 0xff3865
>
> ** PCI devices:
> 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7911]
> Subsystem: Giga-byte Technology Device [1458:5000]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 32
>
> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI
> Express Graphics Port 0) [1002:7913] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 4 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fdf00000-fdffffff
> Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI
> Express Port 2) [1002:7916] (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 4 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fde00000-fdefffff
> Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
> Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
> Subsystem: Giga-byte Technology Device [1458:b002]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 22
> Region 0: I/O ports at ff00 [size=8]
> Region 1: I/O ports at fe00 [size=4]
> Region 2: I/O ports at fd00 [size=8]
> Region 3: I/O ports at fc00 [size=4]
> Region 4: I/O ports at fb00 [size=16]
> Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
> Kernel modules: ahci
>
> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller [1002:4397] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
> Controller [1002:4398] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
> Controller [1002:4396] (prog-if 20 [EHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0
> Controller [1002:4397] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
> Controller [1002:4398] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
> Controller [1002:4396] (prog-if 20 [EHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 19
> Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385]
> (rev 3c)
> Subsystem: Giga-byte Technology Device [1458:4385]
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> Kernel driver in use: piix4_smbus
> Kernel modules: i2c-piix4
>
> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller
> [1002:439c] (prog-if 8a [Master SecP PriP])
> Subsystem: Giga-byte Technology Device [1458:5002]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at fa00 [size=16]
> Capabilities: <access denied>
> Kernel driver in use: pata_atiixp
> Kernel modules: pata_atiixp, ata_generic
>
> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
> [1002:4383]
> Subsystem: Giga-byte Technology Device [1458:a002]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin ? routed to IRQ 16
> Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
> controller [1002:439d]
> Subsystem: Giga-byte Technology Device [1458:5001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
> [1002:4384] (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fdd00000-fddfffff
> Prefetchable memory behind bridge: f8000000-fbffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
> 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2
> Controller [1002:4399] (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology Device [1458:5004]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 4 bytes
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
>
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map [1022:1101]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] DRAM Controller [1022:1102]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Kernel modules: amd64_edac_mod
>
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: <access denied>
> Kernel driver in use: k8temp
> Kernel modules: k8temp
>
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV710 [Radeon
> HD 4350] [1002:954f] (prog-if 00 [VGA controller])
> Subsystem: PC Partner Limited Device [174b:e990]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Region 2: Memory at fdfe0000 (64-bit, non-prefetchable) [size=64K]
> Region 4: I/O ports at ee00 [size=256]
> [virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel modules: radeon
>
> 01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
> Subsystem: PC Partner Limited R700 Audio Device [Radeon HD 4000 Series]
> [174b:aa38]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 4 bytes
> Interrupt: pin B routed to IRQ 19
> Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
> Kernel modules: snd-hda-intel
>
> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
> Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 27
> Region 0: I/O ports at de00 [size=256]
> Region 2: Memory at fdcff000 (64-bit, prefetchable) [size=4K]
> Region 4: Memory at fdce0000 (64-bit, prefetchable) [size=64K]
> [virtual] Expansion ROM at fdc00000 [disabled] [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: r8169
> Kernel modules: r8169
>
> 03:06.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16
> (CX23416) MPEG-2 Encoder [4444:0016] (rev 01)
> Subsystem: Hauppauge computer works Inc. WinTV PVR 250 [0070:4009]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 4 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
> Capabilities: <access denied>
> Kernel driver in use: ivtv
> Kernel modules: ivtv
>
>
> ** USB devices:
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 004: ID 1a34:0806
> Bus 002 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
> (M-BT58)
> Bus 002 Device 002: ID 046a:0001 Cherry GmbH My3000 Keyboard
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> -- System Information:
> Debian Release: squeeze/sid
> APT prefers testing
> APT policy: (500, 'testing')
> Architecture: amd64 (x86_64)
>
> Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
> Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/bash
>
> Versions of packages linux-image-2.6.32-5-amd64 depends on:
> ii debconf [debconf-2.0] 1.5.36 Debian configuration management
> sy
> ii initramfs-tools [linux-initra 0.98.5 tools for generating an initramfs
> ii linux-base 2.6.32-28 Linux image base package
> ii module-init-tools 3.12-1 tools for managing Linux kernel
> mo
>
> Versions of packages linux-image-2.6.32-5-amd64 recommends:
> ii firmware-linux-free 2.6.32-28 Binary firmware for various
> driver
>
> Versions of packages linux-image-2.6.32-5-amd64 suggests:
> ii grub 0.97-63 GRand Unified Bootloader (dummy
> pa
> pn linux-doc-2.6.32 <none> (no description available)
>
> Versions of packages linux-image-2.6.32-5-amd64 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> ii firmware-ivtv 0.27 Binary firmware for
> iTVC15-family
> pn firmware-iwlwifi <none> (no description available)
> ii firmware-linux 0.27 Binary firmware for various
> driver
> ii firmware-linux-nonfree 0.27 Binary firmware for various
> driver
> pn firmware-qlogic <none> (no description available)
> pn firmware-ralink <none> (no description available)
> pn xen-hypervisor <none> (no description available)
>
> -- debconf information:
> linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
> linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
> linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64:
> false
> linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64:
> true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/1291664923.3293.6.ca...@blackpc
