Package: linux-2.6
Version: 2.6.36~rc6-1~experimental.1
Severity: normal
Tags: experimental
Trying out 2.6.36-rc6 as packaged (I need the experimental Nvidia
Xorg driver, so 2.6.32 won't do, and 2.6.35 packages seem to have been
abandoned). On boot, I get an oops (during "wait for /dev to be fully
populated") which I can avoid by blacklisting edac_core and i7core_edac.
However, the module that actually caused the crash may be a driver
dependent on those.
Kernel log below "Package-specific info:" is with those modules blacklisted.
Here is the actual oops:
[ 3.943612] EDAC MC: Ver: 2.1.0 Oct 4 2010
[ 3.951329] PCI: Discovered peer bus ff
[ 3.952079] BUG: unable to handle kernel NULL pointer dereference at
00000000000001a4
[ 3.952194] IP: [<ffffffffa0351e54>]
edac_create_mci_instance_attributes+0xe0/0x139 [edac_core]
[ 3.952279] PGD 1bd525067 PUD 1bd66c067 PMD 0
[ 3.952416] Oops: 0000 [#1] SMP
[ 3.952516] last sysfs file: /sys/devices/pci0000:ff/0000:ff:04.1/class
[ 3.952562] CPU 0
[ 3.952597] Modules linked in: i7core_edac(+) edac_core tpm_bios button
snd_timer processor evdev snd_seq_device pcspkr snd soundcore nls_base wmi
snd_page_alloc ext4 mbcache jbd2 crc16 sd_mod crc_t10dif ata_generic ata_piix
libata scsi_mod thermal thermal_sys
[ 3.953559]
[ 3.953596] Pid: 478, comm: modprobe Not tainted 2.6.36-rc6-amd64 #1 MSI
X58M (MS-7593)/MS-7593
[ 3.953646] RIP: 0010:[<ffffffffa0351e54>] [<ffffffffa0351e54>]
edac_create_mci_instance_attributes+0xe0/0x139 [edac_core]
[ 3.953736] RSP: 0018:ffff8801bd0d1b88 EFLAGS: 00010286
[ 3.953794] RAX: 00000000000001a4 RBX: ffff8801bd44bba0 RCX: 0000000000000000
[ 3.953854] RDX: ffff8801be8f40f0 RSI: ffffffffa0354dc0 RDI: ffff8801bd44bbb0
[ 3.953914] RBP: ffffffffa0364d28 R08: ffff880001a11928 R09: ffff8801be8f4130
[ 3.953975] R10: 00000000fffffff4 R11: ffff8801be8f4130 R12: ffff8801bd44bbb0
[ 3.954035] R13: ffff8801be8f4000 R14: ffff8801be8f4130 R15: 0000000000000060
[ 3.954096] FS: 00007fd1fac6b700(0000) GS:ffff880001a00000(0000)
knlGS:0000000000000000
[ 3.954172] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.954229] CR2: 00000000000001a4 CR3: 00000001bd522000 CR4: 00000000000006f0
[ 3.954289] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.954350] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3.954411] Process modprobe (pid: 478, threadinfo ffff8801bd0d0000, task
ffff8801bd5f5f60)
[ 3.954487] Stack:
[ 3.954536] ffff8801be8f40f0 ffff8801bd44bf70 ffff8801bb500af0
ffff8801bd44bf60
[ 3.954692] <0> ffffffffa0364c38 ffff8801bd44bf70 ffff8801be8f4000
ffff8801be8f4130
[ 3.954924] <0> 0000000000000060 ffffffffa0351e75 ffff8801be8f40f0
ffff8801be8f40f0
[ 3.955202] Call Trace:
[ 3.955257] [<ffffffffa0351e75>] ?
edac_create_mci_instance_attributes+0x101/0x139 [edac_core]
[ 3.955335] [<ffffffffa0351f1b>] ? edac_create_sysfs_mci_device+0x6e/0x1d3
[edac_core]
[ 3.955409] [<ffffffffa03509a5>] ? edac_mc_add_mc+0x8d/0x16d [edac_core]
[ 3.955468] [<ffffffffa0363dd8>] ? i7core_probe+0x842/0x9f9 [i7core_edac]
[ 3.955527] [<ffffffff811a24e7>] ? local_pci_probe+0x49/0x93
[ 3.955583] [<ffffffff811a3226>] ? pci_device_probe+0xc2/0xef
[ 3.955639] [<ffffffff81228782>] ? driver_sysfs_add+0x66/0x8d
[ 3.955695] [<ffffffff812288c3>] ? driver_probe_device+0xa8/0x138
[ 3.955751] [<ffffffff812289a2>] ? __driver_attach+0x4f/0x6f
[ 3.955806] [<ffffffff81228953>] ? __driver_attach+0x0/0x6f
[ 3.955861] [<ffffffff81227f4c>] ? bus_for_each_dev+0x44/0x78
[ 3.955917] [<ffffffff812283a4>] ? bus_add_driver+0xa8/0x1f0
[ 3.955972] [<ffffffff81228c49>] ? driver_register+0x90/0xf8
[ 3.956028] [<ffffffff811a3470>] ? __pci_register_driver+0x4e/0xbe
[ 3.956085] [<ffffffffa036807d>] ? i7core_init+0x7d/0x9d [i7core_edac]
[ 3.956142] [<ffffffffa0368000>] ? i7core_init+0x0/0x9d [i7core_edac]
[ 3.956200] [<ffffffff81002079>] ? do_one_initcall+0x78/0x131
[ 3.956256] [<ffffffff81072982>] ? sys_init_module+0x97/0x1d5
[ 3.956312] [<ffffffff81008a02>] ? system_call_fastpath+0x16/0x1b
[ 3.956367] Code: 8d 63 10 4c 89 33 48 c7 c6 c0 4d 35 a0 4c 89 e7 48 89 43
08 48 89 18 48 8b 45 10 4c 89 6b 58 48 89 43 50 48 8b 45 10 48 8b 14 24 <48> 8b
08 31 c0 e8 8e b3 e3 e0 85 c0 75 3c 48 8b 43 50 4c 89 e2
[ 3.958430] RIP [<ffffffffa0351e54>]
edac_create_mci_instance_attributes+0xe0/0x139 [edac_core]
[ 3.958535] RSP <ffff8801bd0d1b88>
[ 3.958586] CR2: 00000000000001a4
[ 3.958648] ---[ end trace d4fe4ac7c6d47dfe ]---
-- Package-specific info:
** Version:
Linux version 2.6.36-rc6-amd64 (Debian 2.6.36~rc6-1~experimental.1)
(b...@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.4-17) ) #1 SMP Mon Oct 4
09:56:45 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.36-rc6-amd64
root=UUID=80eabe2b-76e2-4a6c-a00e-df8e6cc0dc1d ro quiet
** Not tainted
** Kernel log:
[ 4.482399] alloc irq_desc for 42 on node -1
[ 4.482403] alloc kstat_irqs on node -1
[ 4.482422] firewire_ohci 0000:07:00.0: irq 42 for MSI/MSI-X
[ 4.482451] firewire_ohci: Added fw-ohci device 0000:07:00.0, OHCI v1.10, 4
IR + 8 IT contexts, quirks 0x1
[ 4.583712] ahci 0000:05:00.0: version 3.0
[ 4.583729] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.598369] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 4.598375] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 4.598382] ahci 0000:05:00.0: setting latency timer to 64
[ 4.598702] scsi6 : ahci
[ 4.598820] scsi7 : ahci
[ 4.598900] ata7: SATA max UDMA/133 abar m8...@0xfbcfe000 port 0xfbcfe100
irq 17
[ 4.598904] ata8: SATA max UDMA/133 abar m8...@0xfbcfe000 port 0xfbcfe180
irq 17
[ 4.636887] usbcore: registered new interface driver usbserial
[ 4.636899] USB Serial support registered for generic
[ 4.636912] usbcore: registered new interface driver usbserial_generic
[ 4.636914] usbserial: USB Serial Driver core
[ 4.770111] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.918010] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.918014] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.943469] USB Serial support registered for GSM modem (1-port)
[ 4.943502] usbcore: registered new interface driver option
[ 4.943503] option: v0.7.2:USB Driver for GSM modems
[ 4.945776] usb 3-1: New USB device found, idVendor=046d, idProduct=c018
[ 4.945780] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.945783] usb 3-1: Product: USB Optical Mouse
[ 4.945786] usb 3-1: Manufacturer: Logitech
[ 4.977515] usbcore: registered new interface driver hiddev
[ 4.990089] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input4
[ 4.990163] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1/input0
[ 4.990175] usbcore: registered new interface driver usbhid
[ 4.990177] usbhid: USB HID core driver
[ 5.630838] Adding 17578120k swap on /dev/sda2. Priority:-1 extents:1
across:17578120k
[ 5.634086] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 5.792232] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.124005] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
(null)
[ 6.767167] r8169 0000:06:00.0: eth0: link up
[ 6.767174] r8169 0000:06:00.0: eth0: link up
[ 6.864965] fuse init (API version 7.15)
[ 10.096357] Bluetooth: Core ver 2.15
[ 10.096366] NET: Registered protocol family 31
[ 10.096367] Bluetooth: HCI device and connection manager initialized
[ 10.096368] Bluetooth: HCI socket layer initialized
[ 10.126899] Bluetooth: L2CAP ver 2.15
[ 10.126902] Bluetooth: L2CAP socket layer initialized
[ 10.140668] Bluetooth: RFCOMM TTY layer initialized
[ 10.140675] Bluetooth: RFCOMM socket layer initialized
[ 10.140678] Bluetooth: RFCOMM ver 1.11
[ 10.217905] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.217909] Bluetooth: BNEP filters: protocol multicast
[ 10.409191] Bluetooth: SCO (Voice Link) ver 0.6
[ 10.409193] Bluetooth: SCO socket layer initialized
[ 10.447831] [drm] Initialized drm 1.1.0 20060810
[ 10.522535] nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.522544] nouveau 0000:02:00.0: setting latency timer to 64
[ 10.525974] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card
(0x094100a1)
[ 10.530511] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from
PRAMIN
[ 10.574477] lp: driver loaded but no devices found
[ 10.589359] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 10.589361] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 10.589363] [drm] nouveau 0000:02:00.0: Bios version 62.94.62.00
[ 10.589365] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[ 10.589367] [drm] nouveau 0000:02:00.0: Found Display Configuration Block
version 4.0
[ 10.589369] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[ 10.589370] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030
[ 10.589372] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[ 10.589373] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00020030
[ 10.589374] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c0c080
[ 10.589376] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4
[ 10.589378] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag
0x07
[ 10.589380] [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag
0x08
[ 10.589381] [drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag
0xff
[ 10.589383] [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag
0xff
[ 10.589385] [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag
0xff
[ 10.589388] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset
0xD689
[ 10.638452] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset
0xDAFD
[ 10.654170] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset
0xEAC6
[ 10.654180] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset
0xEBE7
[ 10.662113] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset
0xEE64
[ 10.662117] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset
0xEEC9
[ 10.662785] ppdev: user-space parallel port driver
[ 10.686189] [drm] nouveau 0000:02:00.0: 0xEEC9: Condition still not met
after 20ms, skipping following opcodes
[ 10.686208] [drm] nouveau 0000:02:00.0: Detected 512MiB VRAM
[ 10.784905] [TTM] Zone kernel: Available graphics memory: 3061032 kiB.
[ 10.784909] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 10.784911] [TTM] Initializing pool allocator.
[ 10.871944] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[ 10.871954] mtrr: type mismatch for d0000000,10000000 old: write-back new:
write-combining
[ 10.876710] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[ 10.876715] [drm] nouveau 0000:02:00.0: TV-1 has no encoders, removing
[ 10.909013] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[ 10.928287] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised
FIFO 1
[ 11.085638] [drm] nouveau 0000:02:00.0: allocated 1600x1200 fb: 0x40240000,
bo ffff8801bd750800
[ 11.085788] Console: switching to colour frame buffer device 200x75
[ 11.085792] fb0: nouveaufb frame buffer device
[ 11.085793] drm: registered panic notifier
[ 11.085797] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on
minor 0
[ 11.535232] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2
[ 11.555455] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised
FIFO 2
[ 17.021655] eth0: no IPv6 routers present
** Model information
sys_vendor: MSI
product_name: MS-7593
product_version: 1.0
chassis_vendor: MICRO-STAR INTERNATIONAL CO.,LTD
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: V3.5
board_vendor: MSI
board_name: MSI X58M (MS-7593)
board_version: 1.0
** Loaded modules:
Module Size Used by
parport_pc 18773 0
ppdev 5491 0
lp 8158 0
parport 25614 3 parport_pc,ppdev,lp
nouveau 382938 2
ttm 43951 1 nouveau
drm_kms_helper 21445 1 nouveau
drm 155393 4 nouveau,ttm,drm_kms_helper
sco 7435 2
i2c_algo_bit 4105 1 nouveau
video 18617 1 nouveau
output 1748 1 video
bnep 9663 2
rfcomm 29288 0
l2cap 30116 6 bnep,rfcomm
bluetooth 43558 6 sco,bnep,rfcomm,l2cap
rfkill 13886 3 bluetooth
acpi_cpufreq 5335 0
mperf 1275 1 acpi_cpufreq
cpufreq_userspace 2048 0
cpufreq_stats 2633 0
cpufreq_conservative 7646 0
cpufreq_powersave 942 0
fuse 54430 1
usbhid 31128 0
hid 64007 1 usbhid
option 15458 0
usb_wwan 7855 1 option
usbserial 26233 2 option,usb_wwan
ahci 19473 0
pata_jmicron 2336 0
uhci_hcd 18282 0
r8169 28602 0
mii 3266 1 r8169
firewire_ohci 21978 0
firewire_core 42225 1 firewire_ohci
crc_itu_t 1331 1 firewire_core
libahci 15971 1 ahci
snd_hda_codec_realtek 256966 1
sg 19079 0
sr_mod 12887 0
cdrom 29785 1 sr_mod
ehci_hcd 31102 0
pcspkr 1739 0
i2c_i801 7718 0
shpchp 21955 0
usbcore 118328 7
usbhid,option,usb_wwan,usbserial,uhci_hcd,ehci_hcd
pci_hotplug 19711 1 shpchp
tpm_tis 7045 0
i2c_core 16394 5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
evdev 7282 7
tpm 9635 1 tpm_tis
tpm_bios 4661 1 tpm
snd_hda_intel 19642 0
snd_hda_codec 66997 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5468 1 snd_hda_codec
snd_pcm_oss 31980 0
snd_mixer_oss 12719 1 snd_pcm_oss
button 4706 1 nouveau
snd_pcm 61725 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4454 0
snd_rawmidi 15929 1 snd_seq_midi
snd_seq_midi_event 4754 1 snd_seq_midi
snd_seq 42486 2 snd_seq_midi,snd_seq_midi_event
snd_timer 16288 2 snd_pcm,snd_seq
snd_seq_device 4531 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 47020 11
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 4598 1 snd
snd_page_alloc 6321 2 snd_hda_intel,snd_pcm
processor 25923 9 acpi_cpufreq
nls_base 6369 1 usbcore
wmi 7209 0
ext4 263877 2
mbcache 5088 1 ext4
jbd2 57579 1 ext4
crc16 1327 2 l2cap,ext4
sd_mod 27506 4
crc_t10dif 1300 1 sd_mod
ata_generic 2959 0
ata_piix 20748 3
libata 134106 5 ahci,pata_jmicron,libahci,ata_generic,ata_piix
scsi_mod 154372 4 sg,sr_mod,sd_mod,libata
thermal 12014 0
thermal_sys 11764 3 video,processor,thermal
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN qlen 1000
link/ether 40:61:86:cb:fc:55 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.79/24 brd 192.168.1.255 scope global eth0
inet6 fe80::4261:86ff:fecb:fc55/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1104 8 0 0 0 0 0 0 1104
8 0 0 0 0 0 0
eth0: 120327 366 0 0 0 0 0 0 38084
257 0 0 0 0 0 0
*** Protocol statistics:
Ip:
224 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
223 incoming packets delivered
238 requests sent out
40 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
14 active connections openings
0 passive connection openings
0 failed connection attempts
1 connection resets received
3 connections established
147 segments received
162 segments send out
0 segments retransmited
0 bad segments received.
5 resets sent
Udp:
75 packets received
0 packets to unknown port received.
0 packet receive errors
74 packets sent
UdpLite:
TcpExt:
11 delayed acks sent
56 packet headers predicted
24 acknowledgments not containing data payload received
1 connections reset due to early user close
IpExt:
InMcastPkts: 9
OutMcastPkts: 11
InBcastPkts: 2
InOctets: 111576
OutOctets: 31829
InMcastOctets: 2583
OutMcastOctets: 2663
InBcastOctets: 557
*** Device features:
eth0: 0x180
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port
[8086:3405] (rev 13)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f8000000-fbbfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and
RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers
[8086:3438] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ac00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller [8086:3a3e]
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c01fffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 2 [8086:3a42] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7ffc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7ff7c00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8c00 [size=4]
Region 2: I/O ports at 8880 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8480 [size=16]
Region 5: I/O ports at 8400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 VGA compatible controller [0300]: nVidia Corporation G94 [GeForce 9600
GT] [10de:0622] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Elitegroup Computer Systems Device [1019:10a1]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at bc00 [size=128]
Expansion ROM at fbb80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial
ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 5: Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA
Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7593]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fbdff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f6ff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbdc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
07:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series
Firewire Controller [1106:3403] (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:593d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fbeff800 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at e800 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.36-rc6-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.36-rc6-amd64 depends on:
ii debconf [deb 1.5.36 Debian configuration management sy
ii initramfs-to 0.98.4 tools for generating an initramfs
ii linux-base 2.6.36~rc6-1~experimental.1 Linux image base package
ii module-init- 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.36-rc6-amd64 recommends:
ii firmware-linux-free 2.6.32-25 Binary firmware for various driver
Versions of packages linux-image-2.6.36-rc6-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.36 <none> (no description available)
Versions of packages linux-image-2.6.36-rc6-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.27 Binary firmware for various driver
ii firmware-linux-nonfree 0.27 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20101017194756.2035.45305.report...@moxana.local
