Package: linux-2.6
Version: 2.6.32-23
Severity: normal
I used Qemu to do a Squeeze install, using an encrypted LVM2 install on a 5G
raw image.
When done I mounted the raw image and rsync's its contents into an existing
ext4 image on my "real" encrypted LVM2
partition and added
cryptopts=target=hda2_crypt,source=UUID=41d45178-c0d4-4d8f-a190-1c56b6328318,key=none,rootdev,lvm=VgCompaq-squeeze
to the kernel command line.
/etc/crypttab contained
sda4_crypt UUID=41d45178-c0d4-4d8f-a190-1c56b6328318 none luks
Early-crypto (sorry if I got the name wrong - none of the logs list it) didn't
spot that an encrypted partition with
the same uuid was already opened and prompted again.
When I entered the password again I got a slew of errors relating to duplicate
PV, LVM2...
Changing the luks device name to sda4_crypt on the kernel command line fixes
the problem, but that's not the
point of this bug report, as I hope you will agree.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-3) ) #1 SMP Fri Sep 17 21:50:19 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64.squeeze root=/dev/mapper/VgCompaq-squeeze
resume=/dev/VgCompaq/swap ro quiet splash vga=0x317
cryptopts=target=sda4_crypt,source=UUID=41d45178-c0d4-4d8f-a190-1c56b6328318,key=none,rootdev,lvm=VgCompaq-squeeze
** Not tainted
** Kernel log:
[ 10.672142] ACPI: AC Adapter [AC] (on-line)
[ 10.672512] ACPI: WMI: Mapper loaded
[ 10.727880] udev: renamed network interface eth0 to eth1
[ 10.756239] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.847978] i801_smbus 0000:00:1f.3: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 11.237050] [drm] Initialized drm 1.1.0 20060810
[ 11.315582] cfg80211: Using static regulatory domain info
[ 11.315585] cfg80211: Regulatory domain: US
[ 11.315588] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 11.315591] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 11.315595] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.315601] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.315601] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.315604] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.315607] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 11.315618] cfg80211: Calling CRDA for country: US
[ 11.387778] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 11.423406] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input8
[ 11.546159] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.546165] i915 0000:00:02.0: setting latency timer to 64
[ 11.561342] alloc irq_desc for 26 on node -1
[ 11.561347] alloc kstat_irqs on node -1
[ 11.561358] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 11.561367] [drm] set up 7M of stolen space
[ 11.659728] Linux video capture interface: v2.00
[ 11.686036] [drm] initialized overlay support
[ 11.754445] ath5k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.754469] ath5k 0000:01:00.0: setting latency timer to 64
[ 11.754544] ath5k 0000:01:00.0: registered as 'phy0'
[ 11.948683] uvcvideo: Found UVC 1.00 device CNF7041 (04f2:b057)
[ 11.952488] input: CNF7041 as
/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9
[ 11.952586] usbcore: registered new interface driver uvcvideo
[ 11.952794] USB Video Class driver (v0.1.0)
[ 12.254885] ath: EEPROM regdomain: 0x67
[ 12.254888] ath: EEPROM indicates we should expect a direct regpair map
[ 12.254893] ath: Country alpha2 being used: 00
[ 12.254895] ath: Regpair used: 0x67
[ 12.364329] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing
generic driver
[ 12.364401] Console: switching to colour dummy device 80x25
[ 12.364878] Console: switching to colour frame buffer device 180x56
[ 12.374279] phy0: Selected rate control algorithm 'minstrel'
[ 12.375014] Registered led device: ath5k-phy0::rx
[ 12.375033] Registered led device: ath5k-phy0::tx
[ 12.375036] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 12.488180] fb0: inteldrmfb frame buffer device
[ 12.488183] registered panic notifier
[ 12.489089] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC
function
[ 12.500533] acpi device:15: registered as cooling_device2
[ 12.501050] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 12.501121] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 12.501165] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.501250] alloc irq_desc for 22 on node -1
[ 12.501252] alloc kstat_irqs on node -1
[ 12.501263] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 12.501347] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.685629] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.685740] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.685811] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 13.817381] loop: module loaded
[ 14.702057] Adding 5857272k swap on /dev/mapper/VgCompaq-swap. Priority:-1
extents:1 across:5857272k
[ 36.355840] kjournald starting. Commit interval 5 seconds
[ 36.356023] EXT3 FS on sda1, internal journal
[ 36.356029] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.449623] kjournald starting. Commit interval 5 seconds
[ 36.452298] EXT3 FS on dm-3, internal journal
[ 36.452304] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.518084] kjournald starting. Commit interval 5 seconds
[ 36.520276] EXT3 FS on dm-4, internal journal
[ 36.520282] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.593588] EXT4-fs (dm-1): mounted filesystem with ordered data mode
[ 37.859417] fuse init (API version 7.13)
[ 39.473309] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input14
[ 40.830272] Bluetooth: Core ver 2.15
[ 40.830362] NET: Registered protocol family 31
[ 40.830364] Bluetooth: HCI device and connection manager initialized
[ 40.830368] Bluetooth: HCI socket layer initialized
[ 40.929776] Bluetooth: L2CAP ver 2.14
[ 40.929779] Bluetooth: L2CAP socket layer initialized
[ 41.024027] Bluetooth: RFCOMM TTY layer initialized
[ 41.024032] Bluetooth: RFCOMM socket layer initialized
[ 41.024034] Bluetooth: RFCOMM ver 1.11
[ 41.273549] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 41.273553] Bluetooth: BNEP filters: protocol multicast
[ 41.392621] Bridge firewalling registered
[ 41.528196] Bluetooth: SCO (Voice Link) ver 0.6
[ 41.528200] Bluetooth: SCO socket layer initialized
[ 42.933819] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 42.942776] eth1: link down
[ 42.943495] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 44.345709] lp: driver loaded but no devices found
[ 44.386697] ppdev: user-space parallel port driver
[ 86.274662] wlan0: direct probe to AP 00:14:d1:57:20:2d (try 1)
[ 86.278055] wlan0: direct probe responded
[ 86.278066] wlan0: authenticate with AP 00:14:d1:57:20:2d (try 1)
[ 86.279848] wlan0: authenticated
[ 86.279885] wlan0: associate with AP 00:14:d1:57:20:2d (try 1)
[ 86.382580] wlan0: RX AssocResp from 00:14:d1:57:20:2d (capab=0x431 status=0
aid=1)
[ 86.382589] wlan0: associated
[ 86.384781] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 96.852103] wlan0: no IPv6 routers present
** Model information
sys_vendor: Hewlett-Packard
product_name: Compaq Presario A900 Notebook PC
product_version: F.34
chassis_vendor: Hewlett-Packard
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.34
board_vendor: Hewlett-Packard
board_name: 30ED
board_version: 83.21
** Loaded modules:
Module Size Used by
acpi_cpufreq 5523 0
cpufreq_powersave 902 0
cpufreq_stats 2659 0
cpufreq_userspace 1960 0
cpufreq_conservative 5162 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7209 2
bridge 39470 0
stp 1440 1 bridge
bnep 9363 2
rfcomm 29533 0
l2cap 24736 4 bnep,rfcomm
bluetooth 41763 6 sco,bnep,rfcomm,l2cap
uinput 6376 1
fuse 49998 1
ext3 106134 3
jbd 36877 1 ext3
loop 11767 0
snd_hda_codec_conexant 21869 1
arc4 1274 2
ecb 1841 2
uvcvideo 51887 0
snd_hda_intel 19955 2
ath5k 112034 0
mac80211 136604 1 ath5k
snd_hda_codec 54244 2 snd_hda_codec_conexant,snd_hda_intel
videodev 29881 1 uvcvideo
v4l1_compat 11442 2 uvcvideo,videodev
v4l2_compat_ioctl32 8474 1 videodev
ath 7974 1 ath5k
i915 254663 2
snd_hwdep 5380 1 snd_hda_codec
joydev 8411 0
snd_pcm 60503 2 snd_hda_intel,snd_hda_codec
snd_seq 42737 0
cfg80211 100792 3 ath5k,mac80211,ath
snd_timer 15582 2 snd_pcm,snd_seq
drm_kms_helper 20033 1 i915
snd_seq_device 4493 1 snd_seq
drm 142151 3 i915,drm_kms_helper
snd 46414 12
snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rfkill 12964 3 bluetooth,cfg80211
i2c_algo_bit 4225 1 i915
soundcore 4598 1 snd
led_class 2433 1 ath5k
video 17445 1 i915
snd_page_alloc 6169 2 snd_hda_intel,snd_pcm
i2c_i801 7830 0
psmouse 49729 0
i2c_core 15680 6
videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
pcspkr 1699 0
serio_raw 3752 0
wmi 4323 0
output 1692 1 video
ac 2192 0
evdev 7352 26
processor 30239 3 acpi_cpufreq
battery 4998 0
button 4650 1 i915
ext4 288329 2
mbcache 5050 2 ext3,ext4
jbd2 66759 1 ext4
crc16 1319 2 l2cap,ext4
sha256_generic 8692 2
aes_x86_64 7340 3
aes_generic 25714 1 aes_x86_64
cbc 2539 1
dm_crypt 10427 1
usb_storage 39529 0
dm_mod 53562 19 dm_crypt
sg 18712 0
sd_mod 29713 3
sr_mod 12602 0
cdrom 29415 1 sr_mod
crc_t10dif 1276 1 sd_mod
ata_generic 2983 0
ata_piix 21092 0
8139too 17869 0
ahci 32310 2
uhci_hcd 18457 0
8139cp 15813 0
mii 3210 2 8139too,8139cp
thermal 11674 0
thermal_sys 11942 3 video,processor,thermal
libata 133328 3 ata_generic,ata_piix,ahci
ehci_hcd 30895 0
scsi_mod 121861 5 usb_storage,sg,sd_mod,sr_mod,libata
usbcore 121698 5 uvcvideo,usb_storage,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:1e:ec:86:54:52 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:22:68:98:c3:98 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.101/24 brd 192.168.10.255 scope global wlan0
inet6 fe80::222:68ff:fe98:c398/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 76:ed:0c:c5:80:86 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 14404 222 0 0 0 0 0 0 14404
222 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0:10267981 10041 0 0 0 0 0 0 1989519
9508 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
10367 total packets received
0 forwarded
0 incoming packets discarded
10367 incoming packets delivered
9546 requests sent out
8 outgoing packets dropped
Icmp:
16 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 16
16 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 16
IcmpMsg:
InType3: 16
OutType3: 16
Tcp:
543 active connections openings
7 passive connection openings
58 failed connection attempts
15 connection resets received
1 connections established
9806 segments received
9013 segments send out
47 segments retransmited
0 bad segments received.
91 resets sent
Udp:
391 packets received
16 packets to unknown port received.
0 packet receive errors
428 packets sent
UdpLite:
TcpExt:
1 packets pruned from receive queue because of socket buffer overrun
320 TCP sockets finished time wait in fast timer
4 time wait sockets recycled by time stamp
3 packets rejects in established connections because of timestamp
208 delayed acks sent
Quick ack mode was activated 21 times
6031 packet headers predicted
926 acknowledgments not containing data payload received
195 predicted acknowledgments
23 congestion windows recovered without slow start after partial ack
36 other TCP timeouts
30 packets collapsed in receive queue due to low socket buffer
22 DSACKs sent for old packets
6 DSACKs received
1 connections reset due to unexpected data
3 connections reset due to early user close
2 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 6
TCPSackShiftFallback: 3
IpExt:
InMcastPkts: 297
OutMcastPkts: 201
InBcastPkts: 1
InOctets: 10153814
OutOctets: 1679877
InMcastOctets: 20087
OutMcastOctets: 17423
InBcastOctets: 576
*** Device features:
eth1: 0x829
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub [8086:2a00] (rev 03)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at d1000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 30d0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller [8086:2a03] (rev 03)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d1100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 04)
Subsystem: Conexant Systems, Inc. Presario C700 [14f1:5051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d1300000-d23fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 04) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d2404800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d1200000-d12fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller [8086:2815] (rev 04)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
IDE Controller [8086:2850] (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 30a0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller [8086:2829] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 25
Region 0: I/O ports at 30b8 [size=8]
Region 1: I/O ports at 30dc [size=4]
Region 2: I/O ports at 30b0 [size=8]
Region 3: I/O ports at 30d8 [size=4]
Region 4: I/O ports at 3020 [size=32]
Region 5: Memory at d2404000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 04)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d2404c00 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless
Network Adapter [168c:001c] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:137b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1300000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Hewlett-Packard Company Presario C700 [103c:30d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at d1200000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b057 Chicony Electronics Co., Ltd integrated USB
webcam
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard
reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.4 tools for generating an initramfs
ii linux-base 2.6.32-23 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20101014165625.3561.84579.report...@potemkin.home
