Package: linux-2.6 Version: 2.6.26-24lenny1 Severity: normal
Install of package reported an error - failed to preconfigure - due to /tmp being mounted as noexec. This was during an attempted upgrade to latest linux-image-2.6.26-2-amd64 from lenny updates (recently). Install log: Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Reading task descriptions... Done The following packages will be upgraded: linux-headers-2.6.26-2-amd64 linux-headers-2.6.26-2-common linux-image-2.6.26-2-amd64 linux-libc-dev 4 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 25.8MB of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] y Writing extended state information... Done Get:1 http://security.debian.org lenny/updates/main linux-image-2.6.26-2-amd64 2.6.26-24lenny1 [20.9MB] Get:2 http://security.debian.org lenny/updates/main linux-headers-2.6.26-2-amd64 2.6.26-24lenny1 [392kB] Get:3 http://security.debian.org lenny/updates/main linux-headers-2.6.26-2-common 2.6.26-24lenny1 [3726kB] Get:4 http://security.debian.org lenny/updates/main linux-libc-dev 2.6.26-24lenny1 [754kB] Fetched 25.8MB in 23s (1084kB/s) Preconfiguring packages ... Can't exec "/tmp/linux-image-2.6.26-2-amd64.config.225381": Permission denied at /usr/share/perl/5.10/IPC/Open3.pm line 168. open2: exec of /tmp/linux-image-2.6.26-2-amd64.config.225381 configure 2.6.26-24 failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 linux-image-2.6.26-2-amd64 failed to preconfigure, with exit status 255 (Reading database ... 159229 files and directories currently installed.) Preparing to replace linux-image-2.6.26-2-amd64 2.6.26-24 (using .../linux-image-2.6.26-2-amd64_2.6.26-24lenny1_amd64.deb) ... The directory /lib/modules/2.6.26-2-amd64 still exists. Continuing as directed. Done. Unpacking replacement linux-image-2.6.26-2-amd64 ... Running postrm hook script /sbin/update-grub. Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /vmlinuz-2.6.26-2-amd64 Updating /boot/grub/menu.lst ... done Preparing to replace linux-headers-2.6.26-2-amd64 2.6.26-24 (using .../linux-headers-2.6.26-2-amd64_2.6.26-24lenny1_amd64.deb) ... Unpacking replacement linux-headers-2.6.26-2-amd64 ... Preparing to replace linux-headers-2.6.26-2-common 2.6.26-24 (using .../linux-headers-2.6.26-2-common_2.6.26-24lenny1_amd64.deb) ... Unpacking replacement linux-headers-2.6.26-2-common ... Preparing to replace linux-libc-dev 2.6.26-24 (using .../linux-libc-dev_2.6.26-24lenny1_amd64.deb) ... Unpacking replacement linux-libc-dev ... Setting up linux-image-2.6.26-2-amd64 (2.6.26-24lenny1) ... Running depmod. Running mkinitramfs-kpkg. Not updating initrd symbolic links since we are being updated/reinstalled (2.6.26-24 was configured last, according to dpkg) Not updating image symbolic links since we are being updated/reinstalled (2.6.26-24 was configured last, according to dpkg) Running postinst hook script update-grub. Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /vmlinuz-2.6.26-2-amd64 Updating /boot/grub/menu.lst ... done Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms Setting up linux-headers-2.6.26-2-common (2.6.26-24lenny1) ... Setting up linux-headers-2.6.26-2-amd64 (2.6.26-24lenny1) ... Setting up linux-libc-dev (2.6.26-24lenny1) ... Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Reading task descriptions... Done Current status: 0 updates [-4]. -- Package-specific info: ** Version: Linux version 2.6.26-2-amd64 (Debian 2.6.26-24) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 20 20:16:30 UTC 2010 ** Command line: root=/dev/sda8 ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [428245.811590] sd 9:0:0:0: [sdd] Mode Sense: 21 00 00 00 [428245.811590] sd 9:0:0:0: [sdd] Assuming drive cache: write through [428245.811590] sdd: sdd1 [428245.823587] sd 9:0:0:0: [sdd] Attached SCSI disk [441170.847475] hda: ide_cd_check_ireason: wrong transfer direction! [443020.806449] kjournald starting. Commit interval 5 seconds [443020.810080] EXT3 FS on sdd1, internal journal [443020.810088] EXT3-fs: mounted filesystem with ordered data mode. [443867.928164] hda: ide_cd_check_ireason: wrong transfer direction! [465642.389073] kjournald starting. Commit interval 5 seconds [465642.397592] EXT3 FS on sdd1, internal journal [465642.397599] EXT3-fs: mounted filesystem with ordered data mode. [465697.493292] kjournald starting. Commit interval 5 seconds [465697.494317] EXT3 FS on sdd1, internal journal [465697.494324] EXT3-fs: mounted filesystem with ordered data mode. [465763.901264] kjournald starting. Commit interval 5 seconds [465763.904937] EXT3 FS on sdd1, internal journal [465763.904946] EXT3-fs: mounted filesystem with ordered data mode. [466696.323813] npviewer.bin[19055]: segfault at 0 ip f64037d3 sp ffffca2c error 4 in libflashplayer.so[f6135000+b2c000] [466915.870509] kjournald starting. Commit interval 5 seconds [466915.876450] EXT3 FS on sdd1, internal journal [466915.876450] EXT3-fs: mounted filesystem with ordered data mode. [466966.944640] kjournald starting. Commit interval 5 seconds [466966.948641] EXT3 FS on sdd1, internal journal [466966.948641] EXT3-fs: mounted filesystem with ordered data mode. [467963.594329] kjournald starting. Commit interval 5 seconds [467963.595151] EXT3 FS on sdd1, internal journal [467963.595151] EXT3-fs: mounted filesystem with ordered data mode. [516913.534770] kjournald starting. Commit interval 5 seconds [516913.535090] EXT3 FS on sdd1, internal journal [516913.535090] EXT3-fs: mounted filesystem with ordered data mode. [547438.648692] hda: packet command error: status=0xd0 { Busy } [547438.648692] ide: failed opcode was: unknown [586111.102657] kjournald starting. Commit interval 5 seconds [586111.109071] EXT3 FS on sdd1, internal journal [586111.109078] EXT3-fs: mounted filesystem with ordered data mode. [626046.346344] npviewer.bin[14521]: segfault at ff0a0000 ip ff0a0000 sp ff0a0000 error 14 [651555.250125] kjournald starting. Commit interval 5 seconds [651555.250125] EXT3 FS on sdd1, internal journal [651555.250125] EXT3-fs: mounted filesystem with ordered data mode. [676264.524445] kjournald starting. Commit interval 5 seconds [676264.530983] EXT3 FS on sdd1, internal journal [676264.530991] EXT3-fs: mounted filesystem with ordered data mode. [685392.782217] r8169: eth0: link down [685395.251761] r8169: eth0: link up [685395.251761] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [685406.088050] eth0: no IPv6 routers present [685429.026316] r8169: eth0: link down [685431.010992] r8169: eth0: link up [685431.010992] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [685452.220409] eth0: no IPv6 routers present [685606.828213] r8169: eth0: link up [685694.240366] r8169: eth0: link down [685696.540874] r8169: eth0: link up [685696.541392] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [685712.749765] eth0: no IPv6 routers present [685835.116593] r8169: eth0: link down [685837.327084] r8169: eth0: link up [685837.327552] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [685856.234594] eth0: no IPv6 routers present [770395.189681] kjournald starting. Commit interval 5 seconds [770395.192012] EXT3 FS on sdd1, internal journal [770395.192012] EXT3-fs: mounted filesystem with ordered data mode. [812573.314305] npviewer.bin[2558]: segfault at ff0a0000 ip ff0a0000 sp ff0a0000 error 14 [812856.935279] npviewer.bin[3241]: segfault at ff0a0000 ip ff0a0000 sp ff0a0000 error 14 [814116.926739] hda: ide_cd_check_ireason: wrong transfer direction! [815764.897706] npviewer.bin[8588]: segfault at c ip f5f3a313 sp ffff9360 error 4 in libplds4.so.0d[f5f39000+2000] [830288.382136] vboxdrv: Trying to deactivate the NMI watchdog permanently... [830288.382142] vboxdrv: Successfully done. [830288.382145] vboxdrv: Found 2 processor cores. [830288.382182] VBoxDrv: dbg - g_abExecMemory=ffffffffa0c57000 [830288.382215] vboxdrv: fAsync=0 offMin=0x35c offMax=0xbcc [830288.382283] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [830288.382287] vboxdrv: Successfully loaded version 3.2.4_OSE (interface 0x00140001). [862921.934194] kjournald starting. Commit interval 5 seconds [862921.940000] EXT3 FS on sdd1, internal journal [862921.940000] EXT3-fs: mounted filesystem with ordered data mode. [875842.443999] hda: ide_cd_check_ireason: wrong transfer direction! [951659.529407] kjournald starting. Commit interval 5 seconds [951659.536729] EXT3 FS on sdd1, internal journal [951659.536737] EXT3-fs: mounted filesystem with ordered data mode. [956406.347213] hda: packet command error: status=0xd0 { Busy } [956406.347213] ide: failed opcode was: unknown [964331.551317] npviewer.bin[22405]: segfault at c ip f5fe0313 sp ffff9410 error 4 in libplds4.so.0d[f5fdf000+2000] [965806.048786] usb 4-4.2.4: new full speed USB device using ehci_hcd and address 7 [965806.121026] usb 4-4.2.4: device descriptor read/64, error -32 [965806.244776] hub 4-4.2:1.0: unable to enumerate USB device on port 4 [965806.489037] usb 4-4.2.4: new high speed USB device using ehci_hcd and address 8 [965806.612946] usb 4-4.2.4: configuration #1 chosen from 1 choice [965806.616207] scsi10 : SCSI emulation for USB Mass Storage devices [965806.616207] usb-storage: device found at 8 [965806.616207] usb-storage: waiting for device to settle before scanning [965806.619995] usb 4-4.2.4: New USB device found, idVendor=0bb4, idProduct=0ff9 [965806.620000] usb 4-4.2.4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [965806.620004] usb 4-4.2.4: Product: Android Phone [965806.620007] usb 4-4.2.4: Manufacturer: HTC [965806.620010] usb 4-4.2.4: SerialNumber: HT97ML906878 [965812.153980] usb-storage: device scan complete [965812.153980] scsi 10:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [965812.174513] sd 10:0:0:0: [sde] Attached SCSI removable disk ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: P35-S3 product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F8 board_vendor: Gigabyte Technology Co., Ltd. board_name: P35-S3 board_version: x.x ** Loaded modules: Module Size Used by vboxnetadp 9920 0 vboxnetflt 19472 0 vboxdrv 1789516 2 vboxnetadp,vboxnetflt nvidia 9626312 28 ppdev 11656 0 parport_pc 31016 0 lp 14724 0 parport 41776 3 ppdev,parport_pc,lp acpi_cpufreq 11792 0 cpufreq_conservative 11784 0 cpufreq_userspace 8452 0 cpufreq_powersave 6400 0 cpufreq_ondemand 11792 2 cpufreq_stats 9120 0 freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats ipv6 288456 37 fuse 53184 1 coretemp 11008 0 it87 28952 0 hwmon_vid 7296 1 it87 loop 19468 0 snd_hda_intel 436696 1 snd_pcm_oss 41760 0 snd_mixer_oss 18816 1 snd_pcm_oss snd_pcm 81800 2 snd_hda_intel,snd_pcm_oss i2c_i801 13596 0 pcspkr 7040 0 i2c_core 27936 2 nvidia,i2c_i801 snd_seq_dummy 7428 0 snd_seq_oss 33152 0 snd_seq_midi 11072 0 snd_rawmidi 26784 1 snd_seq_midi snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi snd_seq 54304 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 25744 2 snd_pcm,snd_seq snd_seq_device 11668 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 63688 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12064 1 snd snd_page_alloc 13072 2 snd_hda_intel,snd_pcm button 11680 0 intel_agp 31856 0 evdev 14208 3 ext3 125072 8 jbd 51240 1 ext3 mbcache 12804 1 ext3 ide_cd_mod 36360 0 cdrom 37928 1 ide_cd_mod jmicron 6912 0 [permanent] sd_mod 29376 12 ide_pci_generic 9220 0 [permanent] ide_core 128284 3 ide_cd_mod,jmicron,ide_pci_generic usbhid 45792 0 hid 41792 1 usbhid ff_memless 9224 1 usbhid usb_storage 95936 0 floppy 61800 0 ata_generic 10116 0 ahci 33036 9 r8169 36100 0 ehci_hcd 36108 0 libata 165600 2 ata_generic,ahci scsi_mod 161016 3 sd_mod,usb_storage,libata dock 14112 1 libata uhci_hcd 25760 0 thermal 22688 0 processor 42304 2 acpi_cpufreq,thermal fan 9352 0 thermal_sys 17728 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: f4000000-f7ffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e100 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at e200 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fa104000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000afff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fa000000-fa0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 0000000080000000-00000000800fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e300 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e500 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 00009000-00009fff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 82801IB (ICH9) 4 port SATA AHCI Controller [8086:2923] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 1275 Region 0: I/O ports at e600 [size=8] Region 1: I/O ports at e700 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e900 [size=4] Region 4: I/O ports at ea00 [size=32] Region 5: Memory at fa106000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fa107000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0640] (rev a1) (prog-if 00 [VGA controller]) Subsystem: CardExpert Technology Device [10b0:1401] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at b000 [size=128] [virtual] Expansion ROM at f7000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidiafb, nvidia 03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 5: Memory at fa000000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device [1458:b000] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at c100 [size=4] Region 2: I/O ports at c200 [size=8] Region 3: I/O ports at c300 [size=4] Region 4: I/O ports at c400 [size=16] Capabilities: <access denied> Kernel driver in use: JMicron IDE Kernel modules: ata_generic, jmicron, ide-pci-generic 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 1274 Region 0: I/O ports at d000 [size=256] Region 2: Memory at f9000000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 ** USB devices: Bus 004 Device 008: ID 0bb4:0ff9 High Tech Computer Corp. Bus 004 Device 006: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 004 Device 004: ID 046d:c062 Logitech, Inc. Bus 004 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 5.0.5 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-2-amd64 recommends no packages. Versions of packages linux-image-2.6.26-2-amd64 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) Versions of packages linux-image-2.6.26-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100821023049.26749.93446.report...@hall
