Package: linux-2.6 Version: 2.6.32-17 Severity: normal Hi,
I reported this in February to LKML without much reaction, see http://lkml.org/lkml/2010/2/2/208 It also happened with the latest sid kernel, so reporting here. Now it didn't happen during system bootup, but after an uptime of several days. The message, as received by our log server: Jul 27 16:42:48 nfs.niif.hu kernel: [412579.212737] device-mapper: multipath: Failing path 8:160. Jul 27 16:42:49 nfs.niif.hu kernel: [412579.247872] device-mapper: multipath: Failing path 8:240. Jul 27 16:42:50 nfs.niif.hu kernel: [412579.297906] ------------[ cut here ]------------ Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] kernel BUG at /build/buildd-linux-2.6_2.6.32-17-i3 6-4N4Tq6/linux-2.6-2.6.32/debian/build/source_i386_none/block/cfq-iosched.c:2329! Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] invalid opcode: 0000 [#1] SMP Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] last sysfs file: /sys/devices/virtual/block/dm-3/r movable Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] Modules linked in: ip_vs_wlc ip_vs nfsd nfs lockd scache nfs_acl auth_rpcgss sunrpc ip6t_REJECT ip6t_LOG nf_conntrack_ipv6 ip6table_filter ip6_tables xt recent ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_tcpudp ipt_LOG xt_limit xt multiport iptable_filter ip_tables x_tables ext2 mbcache ipmi_devintf ipmi_si ipmi_msghandler radeon t m snd_pcm snd_timer drm_kms_helper snd soundcore snd_page_alloc drm i2c_algo_bit pcspkr i2c_i801 evdev i2c_core i6300esb rng_core button shpchp processor pci_hotplug e752x_edac edac_core xfs exportfs dm_ro nd_robin scsi_dh_emc dm_multipath dm_mod scsi_dh 8021q garp stp bonding sd_mod crc_t10dif uhci_hcd ehc _hcd ata_generic mptspi ata_piix mptscsih mptbase thermal qla2xxx scsi_transport_spi libata scsi_trans ort_fc thermal_sys scsi_tgt tg3 usbcore libphy nls_base scsi_mod [last unloaded: scsi_wait_scan] Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] Pid: 447, comm: kmpath_handlerd Not tainted (2.6.3 -5-686 #1) IBM BladeCenter HS20 -[884321Y]- Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] EIP: 0060:[<c1131e28>] EFLAGS: 00010046 CPU: 0 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] EIP is at cfq_put_request+0x1c/0x4a Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] EAX: 00000000 EBX: f0b6e708 ECX: c1131e0c EDX: 000 000d Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] ESI: f6498540 EDI: f67c0000 EBP: 00000001 ESP: f64 3ed4 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] Process kmpath_handlerd (pid: 447, ti=f6452000 tas =f6603300 task.ti=f6452000) Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] Stack: Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] f0b6e708 01282c4f c1121419 c1127f18 f67c0000 f0b6 708 00000292 c11283d3 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] <0> f659fd0c f83332eb 00000000 f8332491 f659fc10 f 677800 f6677800 f0b6e708 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] <0> c126b3ee f6600000 00000000 f659fc00 f6677800 f 59fc0c f8332761 f66034bc Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] Call Trace: Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c1121419>] ? elv_put_request+0x10/0x11 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c1127f18>] ? __blk_put_request+0x60/0x8e Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c11283d3>] ? blk_put_request+0x1e/0x2e Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<f8332491>] ? send_trespass_cmd+0x21c/0x226 [scs _dh_emc] Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c126b3ee>] ? schedule+0x78f/0x7dc Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<f8332761>] ? clariion_activate+0x3b/0xeb [scsi_ h_emc] Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<f82c95f1>] ? scsi_dh_activate+0x6d/0x82 [scsi_d ] Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<f8304b8c>] ? activate_path+0x1d/0x118 [dm_multi ath] Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c1040aa7>] ? worker_thread+0x141/0x1bd Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<f8304b6f>] ? activate_path+0x0/0x118 [dm_multip th] Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c10437de>] ? autoremove_wake_function+0x0/0x2d Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c1040966>] ? worker_thread+0x0/0x1bd Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c10435ac>] ? kthread+0x61/0x66 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c104354b>] ? kthread+0x0/0x66 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] Code: e1 4b c1 89 da 5b 5e e9 0b bb f7 ff 5b 5e c3 56 53 8b 70 5c 89 c3 85 f6 74 3c 8b 40 24 83 e0 01 8d 50 0c 8b 44 96 0c 85 c0 75 04 <0f> 0b eb fe 48 8 44 96 0c 8b 43 58 8b 40 10 e8 32 8f ff ff 89 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] EIP: [<c1131e28>] cfq_put_request+0x1c/0x4a SS:ESP 0068:f6453ed4 Jul 27 16:42:50 nfs.niif.hu kernel: [412579.301846] ---[ end trace aca77b10ce27a5b7 ]--- Jul 27 16:42:52 nfs.niif.hu kernel: [412583.065023] bonding: bond0: link status definitely down for in erface eth0, disabling it Jul 27 16:42:52 nfs.niif.hu kernel: [412583.113962] bonding: bond0: making interface eth1 the new acti e one. After this, the machine froze. A couple of minutes before the freeze some MySQL dumps were done, but on rather small databases, so those didn't put serious load on the system. We didn't manage to reproduce the issue yet, although it's much similar to the previous one reported to LKML, which happens frequently. The referenced code is below: /* * queue lock held here */ static void cfq_put_request(struct request *rq) { struct cfq_queue *cfqq = RQ_CFQQ(rq); if (cfqq) { const int rw = rq_data_dir(rq); BUG_ON(!cfqq->allocated[rw]); cfqq->allocated[rw]--; put_io_context(RQ_CIC(rq)->ioc); rq->elevator_private = NULL; rq->elevator_private2 = NULL; cfq_put_queue(cfqq); } } I don't know why the paths 8:160 and 8:240 were failed, the FC fabric probably remained intact during the crash, but multipathd logged this: Jul 27 16:42:48 nfs.niif.hu multipathd: sdk: emc_clariion_checker: Active path to inactive snapshot WWN 60060160f4512000de9d9b74090cdf11. Jul 27 16:42:48 nfs.niif.hu multipathd: checker failed path 8:160 in map 360060160f4512000de9d9b74090cdf11 Jul 27 16:42:48 nfs.niif.hu multipathd: 360060160f4512000de9d9b74090cdf11: remaining active paths: 3 Jul 27 16:42:48 nfs.niif.hu multipathd: sdp: emc_clariion_checker: Active path to inactive snapshot WWN 60060160f4512000de9d9b74090cdf11. Jul 27 16:42:48 nfs.niif.hu multipathd: checker failed path 8:240 in map 360060160f4512000de9d9b74090cdf11 Jul 27 16:42:49 nfs.niif.hu multipathd: 360060160f4512000de9d9b74090cdf11: remaining active paths: 2 Jul 27 16:42:49 nfs.niif.hu multipathd: dm-3: add map (uevent) Jul 27 16:42:49 nfs.niif.hu multipathd: dm-3: devmap already registered The bonding logs are puzzling, but the route logs also show the changes: For eth0, the primary interface: Jul 27 16:49:11.501 MET-DST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down Jul 27 16:49:14.933 MET-DST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up Jul 27 16:49:18.513 MET-DST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down Jul 27 16:49:21.937 MET-DST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up And for eth1, the backup interface: Jul 27 16:49:18.653 MET-DST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down Jul 27 16:49:21.901 MET-DST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up This definitely looks linked to the BUG in some way. The multipath configuration is something like this, with unstable SCSI disk names: nfs (360060160ec612000f6f237e09406df11) dm-0 DGC,RAID 5 size=5.0G features='1 queue_if_no_path' hwhandler='1 emc' wp=rw |-+- policy='round-robin 0' prio=2 status=active | |- 0:0:1:0 sdg 8:96 active ready running | `- 1:0:1:0 sdj 8:144 active ready running `-+- policy='round-robin 0' prio=0 status=enabled |- 0:0:0:0 sda 8:0 active ready running `- 1:0:0:0 sdd 8:48 active ready running SIBM-ESXSST936701LC F3LC065GL00007604NMST dm-3 IBM-ESXS,ST936701LC FN size=34G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=active `- 2:0:0:0 sdm 8:192 active ready running pws_www (360060160ec612000b2582fa24863df11) dm-1 DGC,RAID 5 size=140G features='1 queue_if_no_path' hwhandler='1 emc' wp=rw |-+- policy='round-robin 0' prio=2 status=active | |- 0:0:0:1 sdb 8:16 active ready running | `- 1:0:0:1 sde 8:64 active ready running `-+- policy='round-robin 0' prio=0 status=enabled |- 0:0:1:1 sdh 8:112 active ready running `- 1:0:1:1 sdk 8:160 active ready running pws_sql (360060160ec61200046717d0cf763df11) dm-2 DGC,RAID 5 size=30G features='1 queue_if_no_path' hwhandler='1 emc' wp=rw |-+- policy='round-robin 0' prio=2 status=active | |- 0:0:0:2 sdc 8:32 active ready running | `- 1:0:0:2 sdf 8:80 active ready running `-+- policy='round-robin 0' prio=0 status=enabled |- 0:0:1:2 sdi 8:128 active ready running `- 1:0:1:2 sdl 8:176 active ready running Path 8:240 does not exist now, but the same system can also run on another blade, which sees the same LUN as 0:0:1:3 from the storage. I hope you get an idea how to tackle this. An unstable NFS server isn't particularly fun. :( Thanks, Feri. -- Package-specific info: ** Kernel log: boot messages should be attached The error messages generated by udev running on the inactive paths overflow the kernel log buffer before rsyslogd starts, so they aren't really available: Jul 27 18:43:19 nfs kernel: imklog 4.6.3, log source = /proc/kmsg started. Jul 27 18:43:19 nfs kernel: 7] 00 Jul 27 18:43:19 nfs kernel: [ 167.111502] sd 1:0:1:1: [sdk] Device not ready Jul 27 18:43:19 nfs kernel: [ 167.111505] sd 1:0:1:1: [sdk] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jul 27 18:43:19 nfs kernel: [ 167.111508] sd 1:0:1:1: [sdk] Sense Key : Not Ready [current] Jul 27 18:43:19 nfs kernel: [ 167.111512] sd 1:0:1:1: [sdk] Add. Sense: Logical unit not ready, manual intervention required Jul 27 18:43:19 nfs kernel: [ 167.111517] sd 1:0:1:1: [sdk] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jul 27 18:43:19 nfs kernel: [ 167.111524] end_request: I/O error, dev sdk, sector 0 If you need something specific, please ask for it. My original LKML report also contains some serial-over-LAN logs which may be interesting. ** Model information not available ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 0c) Subsystem: IBM eServer xSeries server mainboard [1014:02dd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 1: Memory at ff000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: e752x_edac Kernel modules: e752x_edac 00:00.1 Class [ff00]: Intel Corporation E7525/E7520 Error Reporting Registers [8086:3591] (rev 0c) Subsystem: IBM eServer xSeries server mainboard [1014:02dd] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:03.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 [8086:3596] (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 I/O behind bridge: 00005000-0000ffff Memory behind bridge: d9000000-dcffffff Prefetchable memory behind bridge: 00000000c0000000-00000000c00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:08.0 System peripheral [0880]: Intel Corporation E7525/E7520/E7320 Extended Configuration Registers [8086:359b] (rev 0c) Subsystem: IBM eServer xSeries server mainboard [1014:02dd] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1c.0 PCI bridge [0604]: Intel Corporation 6300ESB 64-bit PCI-X Bridge [8086:25ae] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: dd000000-deffffff Prefetchable memory behind bridge: 00000000c0100000-00000000c01fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25a9] (rev 02) (prog-if 00 [UHCI]) Subsystem: IBM Device [1014:02dd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 2200 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25aa] (rev 02) (prog-if 00 [UHCI]) Subsystem: IBM Device [1014:02dd] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 2600 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.4 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer [8086:25ab] (rev 02) Subsystem: IBM Device [1014:02dd] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at c0200400 (32-bit, non-prefetchable) [size=16] Kernel modules: i6300esb 00:1d.5 PIC [0800]: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller [8086:25ac] (rev 02) (prog-if 20 [IO(X)-APIC]) Subsystem: IBM Device [1014:02dd] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 0a) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-f8ffffff Prefetchable memory behind bridge: f0000000-f7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 6300ESB LPC Interface Controller [8086:25a1] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 6300ESB PATA Storage Controller [8086:25a2] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: IBM Device [1014:02dd] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 14 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1000 [size=16] Region 5: Memory at c0200000 (32-bit, non-prefetchable) [size=1K] Kernel modules: ata_piix, piix 00:1f.3 SMBus [0c05]: Intel Corporation 6300ESB SMBus Controller [8086:25a4] (rev 02) Subsystem: IBM Device [1014:02dd] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0440 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:01.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller]) Subsystem: IBM eServer xSeries server mainboard [1014:02c8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at f8000000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at f8020000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: radeonfb 02:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 08) Subsystem: IBM Device [1014:026d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Region 0: I/O ports at 4000 [size=256] Region 1: Memory at deff0000 (64-bit, non-prefetchable) [size=64K] Region 3: Memory at defe0000 (64-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at c0100000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: mptspi Kernel modules: mptspi 04:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=04, secondary=06, subordinate=06, sec-latency=64 I/O behind bridge: 00005000-0000ffff Memory behind bridge: d9000000-daffffff Prefetchable memory behind bridge: 00000000c0000000-00000000c00fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 04:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=04, secondary=05, subordinate=05, sec-latency=64 Memory behind bridge: db000000-dcffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 05:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet [14e4:16a8] (rev 10) Subsystem: IBM Device [1014:02e8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 77 Region 0: Memory at dcff0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 05:01.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet [14e4:16a8] (rev 10) Subsystem: IBM Device [1014:02e8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 78 Region 0: Memory at dcfe0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 06:01.0 Fibre Channel [0c04]: QLogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA [1077:2422] (rev 02) Subsystem: QLogic Corp. Device [1077:0136] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (16000ns min), Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 97 Region 0: I/O ports at 5000 [size=256] Region 1: Memory at dafff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at c0000000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: qla2xxx Kernel modules: qla2xxx 06:01.1 Fibre Channel [0c04]: QLogic Corp. ISP2422-based 4Gb Fibre Channel to PCI-X HBA [1077:2422] (rev 02) Subsystem: QLogic Corp. Device [1077:0136] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (16000ns min), Cache Line Size: 128 bytes Interrupt: pin B routed to IRQ 98 Region 0: I/O ports at 5100 [size=256] Region 1: Memory at daffe000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at c0040000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: qla2xxx Kernel modules: qla2xxx ** USB devices: Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32.15 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs ii linux-base 2.6.32-17 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: ii firmware-linux-free 2.6.32-17 Binary firmware for various driver ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-5-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.26 Binary firmware for various driver ii firmware-qlogic 0.26 Binary firmware for QLogic IBA7220 pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100803192624.29633.8248.report...@nfs.niif.hu
