It seems to work OK. I got the linux-image .deb and dpkg -i'd it but it also needed linux-base, so I got that too. dpkg -i'd it, but it needed libuuid-perl. That exists in Etch so aptitude was able to fix things by installing that from etch.
I then rebooted and tested catting the files under /proc/megaraid. I'll attach the dmesg and the contents of those files. Note that the driver still can't get the cache data and assumnes write-through. This is a good assumption (since I have that set on the raid card), but it is only an assumption. If the card had a battery-backup, I may have the cache set differently. Thanks for your help. Doug. On Sat, Jul 10, 2010 at 09:37:31PM +0200, Moritz Muehlenhoff wrote: > tags 530557 moreinfo > thanks > > On Mon, May 25, 2009 at 02:12:37PM -0400, Douglas A. Tutty wrote: > > Package: linux-image-2.6.26-2-686 > > Version: 2.6.26-15lenny2 > > Severity: normal > > > > On up-to-date Etch, I could check the status of my raid array by viewing > > or catting files under /proc/megaraid. On Lenny (with the 1.6.26 > > kernel), I get a segfault the first time (per boot) but subsequent tries > > result in a hung process. The process is immortal, it cannot be killed, > > not even by init on shutdown. > > > > The raid card is a HP NetRaid 1Si. > > Hi, > The next release of Debian (6.0, code name Squeeze) will be based > on 2.6.32. Please test the current 2.6.32 from unstable/testing and tell > us whether the problem persists. If so, we should report it upstream > to the kernel.org developers. > > The 2.6.32 kernel is available from packages.debian.org and can > be installed in both Debian stable, testing and unstable > installations. > > Thanks, > Moritz >
Battery Status:[9] Module Missing Pack Missing
v2.00.4 (Release Date: Thu Feb 9 08:51:30 EST 2006) Controller Type: 438/466/467/471/493/518/520/531/532 Controller is not using 64-bit memory addressing Base = f7c88000, Irq = 17, Logical Drives = 2, Channels = 1 Version =F :B , DRAM = 16Mb Controller Queue Depth = 254, Driver Queue Depth = 126 support_ext_cdb = 0 support_random_del = 0 boot_ldrv_enabled = 1 boot_ldrv = 0 boot_pdrv_enabled = 0 boot_pdrv_ch = 0 boot_pdrv_tgt = 0 quiescent = 0 has_cluster = 0 Module Parameters: max_cmd_per_lun = 63 max_sectors_per_io = 128
Channel: 0 Id: 0 State: Online. Vendor: HP Model: 36.4GB C 80-D94N Rev: D94N Type: Direct-Access ANSI SCSI revision: 02 Channel: 0 Id: 1 State: Online. Vendor: HP Model: 36.4GB C 80-D94N Rev: D94N Type: Direct-Access ANSI SCSI revision: 02
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003ffffc00 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffffc00 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fffe9400 - 0000000100000000 (reserved) [ 0.000000] DMI 2.1 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 37dcb000 - 37fefac5 [ 0.000000] Allocated new RAMDISK: 00100000 - 00324ac5 [ 0.000000] Move RAMDISK from 0000000037dcb000 - 0000000037fefac4 to 00100000 - 00324ac4 [ 0.000000] ACPI: RSDP 000f72c0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 3fffde8f 00030 (v01 HP HWPC203 00000001 LTP 00000000) [ 0.000000] ACPI: FACP 3ffffb13 00074 (v01 HP HWPC203 00000002 PTL 001E8480) [ 0.000000] ACPI: DSDT 3fffdebf 01C54 (v01 HP HWPC203 00000001 MSFT 0100000A) [ 0.000000] ACPI: FACS 3fffffc0 00040 [ 0.000000] ACPI: APIC 3ffffb87 00052 (v01 PTLTD APIC 00000001 LTP 00000001) [ 0.000000] ACPI: BOOT 3ffffbd9 00027 (v01 PTLTD $SBFTBL$ 00000001 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 139MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00014c4000 - 00014ca170] BRK ==> [00014c4000 - 00014ca170] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000100000 - 0000324ac5] NEW RAMDISK ==> [0000100000 - 0000324ac5] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f7330] f7330 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 280 pages used for memmap [ 0.000000] HighMem zone: 35546 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ea000 [ 0.000000] PM: Registered nosave memory: 00000000000ea000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34136 r0 d23208 u2097152 [ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: root=LABEL=root ro apm=power-off [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:0003fff0) [ 0.000000] Memory: 1031372k/1048512k available (2490k kernel code, 16252k reserved, 1318k data, 372k init, 143304k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB) [ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB) [ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 449.246 MHz processor. [ 0.004022] Calibrating delay loop (skipped), value calculated using timer frequency.. 898.49 BogoMIPS (lpj=1796984) [ 0.004230] Security Framework initialized [ 0.004325] SELinux: Disabled at boot. [ 0.004422] Mount-cache hash table entries: 512 [ 0.005259] Initializing cgroup subsys ns [ 0.005335] Initializing cgroup subsys cpuacct [ 0.005412] Initializing cgroup subsys devices [ 0.005480] Initializing cgroup subsys freezer [ 0.005546] Initializing cgroup subsys net_cls [ 0.005714] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.005819] CPU: L2 cache: 512K [ 0.005890] mce: CPU supports 5 MCE banks [ 0.006026] Performance Events: p6 PMU driver. [ 0.006146] ... version: 0 [ 0.006207] ... bit width: 32 [ 0.006269] ... generic registers: 2 [ 0.006331] ... value mask: 00000000ffffffff [ 0.006396] ... max period: 000000007fffffff [ 0.006461] ... fixed-purpose events: 0 [ 0.006522] ... event mask: 0000000000000003 [ 0.008034] Checking 'hlt' instruction... OK. [ 0.027771] ACPI: Core revision 20090903 [ 0.035941] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.037657] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.040001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.040001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.040001] ..... (found apic 0 pin 2) ... [ 0.040001] ....... failed. [ 0.040001] ...trying to set up timer as Virtual Wire IRQ... [ 0.081223] ..... works. [ 0.081285] CPU0: Intel Pentium II (Deschutes) stepping 02 [ 0.084001] Booting processor 1 APIC 0x0 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.008000] CPU: L2 cache: 512K [ 0.172151] CPU1: Intel Pentium II (Deschutes) stepping 02 [ 0.172514] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176348] Brought up 2 CPUs [ 0.176432] Total of 2 processors activated (1797.04 BogoMIPS). [ 0.177936] CPU0 attaching sched-domain: [ 0.177954] domain 0: span 0-1 level CPU [ 0.177968] groups: 0 1 [ 0.177994] CPU1 attaching sched-domain: [ 0.178007] domain 0: span 0-1 level CPU [ 0.178020] groups: 1 0 [ 0.178445] devtmpfs: initialized [ 0.181367] regulator: core version 0.5 [ 0.181367] NET: Registered protocol family 16 [ 0.181367] ACPI: bus type pci registered [ 0.199629] PCI: PCI BIOS revision 2.10 entry at 0xfdb02, last bus=2 [ 0.199703] PCI: Using configuration type 1 for base access [ 0.201750] bio: create slab <bio-0> at 0 [ 0.204393] ACPI: EC: Look up EC in DSDT [ 0.242172] ACPI: Interpreter enabled [ 0.242285] ACPI: (supports S0) [ 0.242416] ACPI: Using IOAPIC for interrupt routing [ 0.304154] ACPI: No dock devices found. [ 0.309382] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.309660] pci 0000:00:00.0: reg 10 32bit mmio pref: [0x000000-0xfffffff] [ 0.309896] pci 0000:00:04.1: reg 20 io port: [0x1020-0x102f] [ 0.310008] pci 0000:00:04.2: reg 20 io port: [0x1000-0x101f] [ 0.310081] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, [ 0.310089] * this clock source is slow. Consider trying other clock sources [ 0.310297] pci 0000:00:04.3: quirk: region 8000-803f claimed by PIIX4 ACPI [ 0.310375] pci 0000:00:04.3: quirk: region 1040-104f claimed by PIIX4 SMB [ 0.310631] pci 0000:00:08.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff] [ 0.310708] pci 0000:00:08.0: PME# supported from D0 D1 D3hot D3cold [ 0.310784] pci 0000:00:08.0: PME# disabled [ 0.310912] pci 0000:00:08.1: reg 10 32bit mmio: [0xfa001000-0xfa001fff] [ 0.310987] pci 0000:00:08.1: PME# supported from D0 D1 D3hot D3cold [ 0.311062] pci 0000:00:08.1: PME# disabled [ 0.311189] pci 0000:00:08.2: reg 10 32bit mmio: [0xfa002000-0xfa002fff] [ 0.311264] pci 0000:00:08.2: PME# supported from D0 D1 D3hot D3cold [ 0.311339] pci 0000:00:08.2: PME# disabled [ 0.311474] pci 0000:00:08.3: reg 10 32bit mmio: [0xfa004000-0xfa0040ff] [ 0.311554] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold [ 0.311628] pci 0000:00:08.3: PME# disabled [ 0.311840] pci 0000:00:09.1: reg 10 32bit mmio pref: [0xfa010000-0xfa01ffff] [ 0.311907] pci 0000:00:09.1: reg 30 32bit mmio pref: [0x000000-0x007fff] [ 0.312035] pci 0000:00:0d.0: reg 10 32bit mmio pref: [0xfc000000-0xfdffffff] [ 0.312060] pci 0000:00:0d.0: reg 14 32bit mmio: [0xfa003000-0xfa003fff] [ 0.312106] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x007fff] [ 0.312259] pci 0000:01:03.0: reg 10 32bit mmio pref: [0xfa500000-0xfa500fff] [ 0.312285] pci 0000:01:03.0: reg 14 io port: [0x9400-0x941f] [ 0.312309] pci 0000:01:03.0: reg 18 32bit mmio: [0xfa100000-0xfa1fffff] [ 0.312353] pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x0fffff] [ 0.312447] pci 0000:01:04.0: reg 10 io port: [0x9000-0x90ff] [ 0.312472] pci 0000:01:04.0: reg 14 32bit mmio: [0xfa201000-0xfa2010ff] [ 0.312496] pci 0000:01:04.0: reg 18 32bit mmio: [0xfa200000-0xfa200fff] [ 0.312623] pci 0000:00:07.0: bridge io port: [0x9000-0x9fff] [ 0.312642] pci 0000:00:07.0: bridge 32bit mmio: [0xfa100000-0xfa2fffff] [ 0.312665] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfa500000-0xfa5fffff] [ 0.312813] pci_bus 0000:00: on NUMA node 0 [ 0.312841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.313426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.318878] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.319929] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.321002] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.322052] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.323093] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.324028] vgaarb: loaded [ 0.324309] PCI: Using ACPI for IRQ routing [ 0.325014] Switching to clocksource tsc [ 0.331279] pnp: PnP ACPI init [ 0.331415] ACPI: bus type pnp registered [ 0.498328] pnp: PnP ACPI: found 14 devices [ 0.498399] ACPI: ACPI bus type pnp unregistered [ 0.498472] PnPBIOS: Disabled by ACPI PNP [ 0.498596] system 00:05: iomem range 0xfffd0000-0xfffeffff could not be reserved [ 0.534796] pci 0000:01:03.0: BAR 6: can't allocate mem resource [0xfa600000-0xfa5fffff] [ 0.534889] pci 0000:00:07.0: PCI bridge, secondary bus 0000:01 [ 0.534962] pci 0000:00:07.0: IO window: 0x9000-0x9fff [ 0.535035] pci 0000:00:07.0: MEM window: 0xfa100000-0xfa2fffff [ 0.535110] pci 0000:00:07.0: PREFETCH window: 0x000000fa500000-0x000000fa5fffff [ 0.535199] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.535266] pci 0000:00:09.0: IO window: disabled [ 0.535336] pci 0000:00:09.0: MEM window: disabled [ 0.535404] pci 0000:00:09.0: PREFETCH window: disabled [ 0.535521] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.535538] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.535555] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.535571] pci_bus 0000:01: resource 1 mem: [0xfa100000-0xfa2fffff] [ 0.535587] pci_bus 0000:01: resource 2 pref mem [0xfa500000-0xfa5fffff] [ 0.535772] NET: Registered protocol family 2 [ 0.536377] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.538807] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.544632] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.547728] TCP: Hash tables configured (established 131072 bind 65536) [ 0.547818] TCP reno registered [ 0.548466] NET: Registered protocol family 1 [ 0.548625] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.548924] pci 0000:00:0d.0: Boot video device [ 0.548957] pci 0000:01:03.0: Firmware left e100 interrupts enabled; disabling [ 0.549338] Unpacking initramfs... [ 0.880507] Freeing initrd memory: 2194k freed [ 0.893395] Simple Boot Flag at 0x35 set to 0x1 [ 0.894827] audit: initializing netlink socket (disabled) [ 0.894953] type=2000 audit(1279064414.894:1): initialized [ 0.895979] highmem bounce pool size: 64 pages [ 0.896070] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.906685] VFS: Disk quotas dquot_6.5.2 [ 0.907137] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.907703] msgmni has been set to 1739 [ 0.909292] alg: No test for stdrng (krng) [ 0.909562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.909653] io scheduler noop registered [ 0.909716] io scheduler anticipatory registered [ 0.909780] io scheduler deadline registered [ 0.910158] io scheduler cfq registered (default) [ 0.911142] isapnp: Scanning for PnP cards... [ 1.265628] isapnp: No Plug & Play device found [ 1.276318] Linux agpgart interface v0.103 [ 1.277125] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.277449] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.277868] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.278373] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A [ 1.279513] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.280133] 00:0a: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A [ 1.280824] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.281692] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.284762] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.284861] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.285363] mice: PS/2 mouse device common for all mice [ 1.285895] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.286039] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.286181] cpuidle: using governor ladder [ 1.286248] cpuidle: using governor menu [ 1.286328] No iBFT detected. [ 1.288836] TCP cubic registered [ 1.290003] NET: Registered protocol family 10 [ 1.293081] lo: Disabled Privacy Extensions [ 1.295252] Mobile IPv6 [ 1.295322] NET: Registered protocol family 17 [ 1.295461] Using IPI No-Shortcut mode [ 1.296050] PM: Resume from disk failed. [ 1.296089] registered taskstats version 1 [ 1.296953] rtc_cmos 00:02: setting system clock to 2010-07-13 23:40:16 UTC (1279064416) [ 1.297187] Initalizing network drop monitor service [ 1.297404] Freeing unused kernel memory: 372k freed [ 1.299558] Write protecting the kernel text: 2492k [ 1.299742] Write protecting the kernel read-only data: 916k [ 1.303621] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.624604] SCSI subsystem initialized [ 1.645058] megaraid_legacy 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.645166] megaraid: found 0x8086:0x1960:bus 0:slot 9:func 1 [ 1.645585] scsi0:Found MegaRAID controller at 0xf7c88000, IRQ:17 [ 1.722104] megaraid: [F :B ] detected 2 logical drives. [ 1.800225] megaraid: channel[0] is raid. [ 1.859945] scsi0 : LSI Logic MegaRAID F 254 commands 16 targs 4 chans 7 luns [ 1.861671] scsi0: scanning scsi channel 0 for logical drives. [ 1.862491] scsi 0:0:0:0: Direct-Access MegaRAID LD0 RAID1 21000R F PQ: 0 ANSI: 2 [ 1.863558] scsi 0:0:1:0: Direct-Access MegaRAID LD1 RAID0 27462R F PQ: 0 ANSI: 2 [ 1.875956] scsi0: scanning scsi channel 4 [P0] for physical devices. [ 5.817202] sd 0:0:0:0: [sda] 43008000 512-byte logical blocks: (22.0 GB/20.5 GiB) [ 5.817409] sd 0:0:0:0: [sda] Write Protect is off [ 5.817485] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 [ 5.817584] sd 0:0:0:0: [sda] Asking for cache data failed [ 5.817658] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.818110] sd 0:0:1:0: [sdb] 56242176 512-byte logical blocks: (28.7 GB/26.8 GiB) [ 5.818439] sd 0:0:0:0: [sda] Asking for cache data failed [ 5.818518] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.818598] sda: sda1 sda2 sda3 sda4 < [ 5.819726] sd 0:0:1:0: [sdb] Write Protect is off [ 5.819847] sd 0:0:1:0: [sdb] Mode Sense: 00 00 00 00 [ 5.820402] sd 0:0:1:0: [sdb] Asking for cache data failed [ 5.820477] sd 0:0:1:0: [sdb] Assuming drive cache: write through [ 5.821333] sd 0:0:1:0: [sdb] Asking for cache data failed [ 5.821409] sd 0:0:1:0: [sdb] Assuming drive cache: write through [ 5.821483] sdb: sda5 sdb1 sdb2 [ 5.829809] sd 0:0:1:0: [sdb] Asking for cache data failed [ 5.829885] sd 0:0:1:0: [sdb] Assuming drive cache: write through [ 5.829957] sd 0:0:1:0: [sdb] Attached SCSI disk [ 5.837891] sda6 > [ 5.840307] sd 0:0:0:0: [sda] Asking for cache data failed [ 5.840382] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.840455] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.775298] JFS: nTxBlock = 8081, nTxLock = 64648 [ 9.268938] udevd version 125 started [ 12.912609] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 15.061398] usbcore: registered new interface driver usbfs [ 15.061645] usbcore: registered new interface driver hub [ 15.081615] usbcore: registered new device driver usb [ 15.169897] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.257834] Floppy drive(s): fd0 is 1.44M [ 15.287397] FDC 0 is a National Semiconductor PC87306 [ 15.345897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.681598] uhci_hcd: USB Universal Host Controller Interface driver [ 15.682003] uhci_hcd 0000:00:04.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 15.682114] uhci_hcd 0000:00:04.2: UHCI Host Controller [ 15.682368] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 [ 15.682594] uhci_hcd 0000:00:04.2: irq 19, io base 0x00001000 [ 15.682939] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.683025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.683115] usb usb1: Product: UHCI Host Controller [ 15.683189] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 15.683264] usb usb1: SerialNumber: 0000:00:04.2 [ 15.683832] usb usb1: configuration #1 chosen from 1 choice [ 15.720187] hub 1-0:1.0: USB hub found [ 15.720324] hub 1-0:1.0: 2 ports detected [ 15.753104] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 15.753302] ohci_hcd 0000:00:08.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 15.753438] ohci_hcd 0000:00:08.0: OHCI Host Controller [ 15.753563] ohci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 2 [ 15.753747] ohci_hcd 0000:00:08.0: irq 17, io mem 0xfa000000 [ 15.814211] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.814313] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.814414] usb usb2: Product: OHCI Host Controller [ 15.814489] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 15.814568] usb usb2: SerialNumber: 0000:00:08.0 [ 15.815236] usb usb2: configuration #1 chosen from 1 choice [ 15.815513] hub 2-0:1.0: USB hub found [ 15.815656] hub 2-0:1.0: 2 ports detected [ 15.816077] ohci_hcd 0000:00:08.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 15.816227] ohci_hcd 0000:00:08.1: OHCI Host Controller [ 15.817358] ohci_hcd 0000:00:08.1: new USB bus registered, assigned bus number 3 [ 15.817570] ohci_hcd 0000:00:08.1: irq 18, io mem 0xfa001000 [ 15.824111] hub 1-0:1.0: over-current change on port 1 [ 15.863904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 15.863998] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 15.884850] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 15.884940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.885024] usb usb3: Product: OHCI Host Controller [ 15.885099] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 15.885175] usb usb3: SerialNumber: 0000:00:08.1 [ 15.885792] usb usb3: configuration #1 chosen from 1 choice [ 15.886072] hub 3-0:1.0: USB hub found [ 15.886208] hub 3-0:1.0: 2 ports detected [ 15.886703] ehci_hcd 0000:00:08.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.886876] ehci_hcd 0000:00:08.3: EHCI Host Controller [ 15.887012] ehci_hcd 0000:00:08.3: new USB bus registered, assigned bus number 4 [ 15.887237] ehci_hcd 0000:00:08.3: debug port 1 [ 15.909224] ehci_hcd 0000:00:08.3: irq 16, io mem 0xfa004000 [ 15.921290] ehci_hcd 0000:00:08.3: USB 2.0 started, EHCI 1.00 [ 15.921555] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 15.921645] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 15.921737] usb usb4: Product: EHCI Host Controller [ 15.921818] usb usb4: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 15.921895] usb usb4: SerialNumber: 0000:00:08.3 [ 15.922498] usb usb4: configuration #1 chosen from 1 choice [ 15.922808] hub 4-0:1.0: USB hub found [ 15.922930] hub 4-0:1.0: 6 ports detected [ 15.923418] ohci_hcd 0000:00:08.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 15.923591] ohci_hcd 0000:00:08.2: OHCI Host Controller [ 15.923726] ohci_hcd 0000:00:08.2: new USB bus registered, assigned bus number 5 [ 15.923895] ohci_hcd 0000:00:08.2: irq 19, io mem 0xfa002000 [ 15.928100] hub 1-0:1.0: over-current change on port 2 [ 16.158530] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 16.158626] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.158708] usb usb5: Product: OHCI Host Controller [ 16.158777] usb usb5: Manufacturer: Linux 2.6.32-5-686 ohci_hcd [ 16.158845] usb usb5: SerialNumber: 0000:00:08.2 [ 16.159460] usb usb5: configuration #1 chosen from 1 choice [ 16.159769] hub 5-0:1.0: USB hub found [ 16.159892] hub 5-0:1.0: 2 ports detected [ 16.649100] libata version 3.00 loaded. [ 17.721366] piix4_smbus 0000:00:04.3: Host SMBus controller not enabled! [ 17.972990] processor LNXCPU:00: registered as cooling_device0 [ 17.973349] processor LNXCPU:01: registered as cooling_device1 [ 18.150938] parport_pc 00:0b: reported by Plug and Play ACPI [ 18.151085] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 18.284802] ata_piix 0000:00:04.1: version 2.13 [ 18.301421] scsi1 : ata_piix [ 18.313158] scsi2 : ata_piix [ 18.313557] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1020 irq 14 [ 18.313639] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1028 irq 15 [ 18.344238] ata2: port disabled. ignoring. [ 18.508600] ata1.00: ATAPI: CD-ROM CDR_U240, 1.09, max MWDMA2 [ 18.524426] ata1.00: configured for MWDMA2 [ 18.526045] scsi 1:0:0:0: CD-ROM TORiSAN CD-ROM CDR_U240 1.09 PQ: 0 ANSI: 5 [ 19.013810] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 19.013915] e100: Copyright(c) 1999-2006 Intel Corporation [ 19.014181] e100 0000:01:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 19.407412] e100: eth0: e100_probe: addr 0xfa500000, irq 19, MAC addr 00:a0:c9:dd:5f:e2 [ 19.407642] sym53c8xx 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 19.565278] sym0: <895> rev 0x1 at pci 0000:01:04.0 irq 18 [ 19.707972] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 20.054201] sym0: Symbios NVRAM, ID 7, Fast-40, SE, parity checking [ 20.054289] sym0: open drain IRQ line driver, using on-chip SRAM [ 20.054357] sym0: using LOAD/STORE-based firmware. [ 20.056025] sym0: SCSI BUS has been reset. [ 20.061171] sym0: SCSI BUS mode change from SE to SE. [ 20.061205] scsi3 : sym-2.2.3 [ 20.063509] sym0: SCSI BUS has been reset. [ 20.516979] Error: Driver 'pcspkr' is already registered, aborting... [ 22.761590] sr0: scsi3-mmc drive: 10x/23x xa/form2 cdda tray [ 22.761687] Uniform CD-ROM driver Revision: 3.20 [ 22.762335] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 23.054001] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.054337] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 23.054637] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 25.928776] loop: module loaded [ 26.129740] lp0: using parport0 (interrupt-driven). [ 26.579855] device-mapper: uevent: version 1.0.3 [ 26.580865] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 28.251537] padlock: VIA PadLock not detected. [ 30.156628] padlock: VIA PadLock Hash Engine not detected. [ 54.234698] Adding 489972k swap on /dev/mapper/sda2_crypt. Priority:-1 extents:1 across:489972k [ 57.222059] ip_tables: (C) 2000-2006 Netfilter Core Team [ 57.576675] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 58.082522] Netfilter messages via NETLINK v0.30. [ 58.337487] nf_conntrack version 0.5.0 (16162 buckets, 64648 max) [ 58.341299] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 58.341318] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 58.341331] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 60.758577] ctnetlink v0.93: registering with nfnetlink. [ 62.136871] ClusterIP Version 0.8 loaded successfully [ 95.954665] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 110.624360] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Contents of Mail Box Structure Fw Command = 0x02 Cmd Sequence = 0x7a No of Sectors= 0008 LBA = 0xeeba7 DTA = 0x36620000 Logical Drive= 0x00 No of SG Elmt= 0x00 Busy = 0 Status = 0x00
Logical drive: 0:, state: optimal Span depth: 1, RAID level: 1, Stripe size: 64, Row size: 2 Read Policy: Adaptive, Write Policy: Write thru, Cache Policy: Cached IO Logical drive: 1:, state: optimal Span depth: 0, RAID level: 0, Stripe size:128, Row size: 0 Read Policy: No read ahead, Write Policy: Write thru, Cache Policy: Cached IO
Rebuild Rate: [50%]
Statistical Information for this controller pend_cmds = 0 IO and error counters not compiled in driver.
