--- Begin Message ---
Package: linux-2.6
Version: 2.6.31~rc6-1~experimental.1~snapshot.14160
Severity: normal
Hi,
I've tried KMS since about 2.6.30. I've seen support improved for each new
kernel version (each new rc for 2.6.31), however suspend-to-disk has always
problems.
With older kernel version, KMS and suspend-to-disk did not work at all.
With more recent kernel (as 2.6.31-rc6), KMS and suspend-to-disk seems to
work sometimes. However, it happens sometimes to freeze at restart (just
after reloading the kernel state, ie after the "... reloading ... 100%").
The laptop is then completly frozen, the graphical screen is not correctly
restored and I do not see anything in the /var/log/syslog after next reboot.
When the laptop is so frozen, the only solution is to hard-reboot it.
After several such freeze, some ext3 corruptions have been found on my disks
(both / and /home). I do not know if they are due to the bug itself or to the
fact that I had to hard-reboot the machine.
Nevertheless, I removed KMS in my configuration and now I can use
suspend-to-disk without any problems. Summer break being ended, I need to be
able to suspend-to-disk and not to have on-disk corruption. So I do not know
when I will be able to test KMS again. If other users experiment the same
problem, this bug can be use to track the progress on it.
For info, my graphic card is (from lspci):
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (rev 0c)
Regards,
Vincent
PS: to enable KMS, I only added
intel_agp
drm
i915 modeset=1
in /etc/initramfs-tools/modules and recreated the initrd
-- Package-specific info:
** Version:
Linux version 2.6.31-rc6-amd64 (Debian
2.6.31~rc6-1~experimental.1~snapshot.14160) (wa...@debian.org) (gcc version
4.3.3 (GCC) ) #1 SMP Sat Aug 22 01:15:15 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.31-rc6-amd64 root=/dev/mapper/eyak-root ro quiet
** Tainted: G W (512)
** Kernel log:
[236124.392058] CPU1 attaching sched-domain:
[236124.392061] domain 0: span 0-1 level MC
[236124.392064] groups: 1 0
[236124.392704] CPU1 is up
[236124.392708] ACPI: Waking up from system sleep state S4
[236124.404729] pci 0000:00:02.0: restoring config space at offset 0x1 (was
0x900007, writing 0x900403)
[236124.404851] ehci_hcd 0000:00:1a.7: PME# disabled
[236124.404889] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1
(was 0x100106, writing 0x100102)
[236124.405222] ehci_hcd 0000:00:1d.7: PME# disabled
[236124.405244] pci 0000:00:1e.0: restoring config space at offset 0x6 (was
0x20040300, writing 0x20070300)
[236124.405367] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was
0x2b00403, writing 0x2b00407)
[236124.405516] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was
0x100106, writing 0x100506)
[236124.405620] tg3 0000:09:00.0: restoring config space at offset 0xc (was
0x0, writing 0x20200000)
[236124.405685] yenta_cardbus 0000:03:01.0: restoring config space at offset
0xf (was 0x14001ff, writing 0x5c001ff)
[236124.405698] yenta_cardbus 0000:03:01.0: restoring config space at offset
0xa (was 0x0, writing 0xf43ff000)
[236124.405704] yenta_cardbus 0000:03:01.0: restoring config space at offset
0x9 (was 0x0, writing 0xf4000000)
[236124.405718] yenta_cardbus 0000:03:01.0: restoring config space at offset
0x3 (was 0x824000, writing 0x82a800)
[236124.405725] yenta_cardbus 0000:03:01.0: restoring config space at offset
0x1 (was 0x4100007, writing 0x4100087)
[236124.405769] firewire_ohci 0000:03:01.4: restoring config space at offset
0x1 (was 0x2100117, writing 0x2180117)
[236124.446617] pci 0000:00:02.0: PME# disabled
[236124.446624] pci 0000:00:02.0: setting latency timer to 64
[236124.446628] pci 0000:00:02.1: PME# disabled
[236124.446634] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[236124.446674] usb usb2: root hub lost power or was reset
[236124.446713] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[236124.446752] usb usb4: root hub lost power or was reset
[236124.446772] ehci_hcd 0000:00:1a.7: PME# disabled
[236124.446776] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[236124.446781] usb usb1: root hub lost power or was reset
[236124.450667] ehci_hcd 0000:00:1a.7: debug port 1
[236124.450673] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[236124.450730] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[236124.450736] HDA Intel 0000:00:1b.0: setting latency timer to 64
[236124.592360] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[236124.592404] usb usb5: root hub lost power or was reset
[236124.592423] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[236124.592460] usb usb6: root hub lost power or was reset
[236124.592477] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[236124.592515] usb usb7: root hub lost power or was reset
[236124.592552] ehci_hcd 0000:00:1d.7: PME# disabled
[236124.592556] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[236124.592561] usb usb3: root hub lost power or was reset
[236124.596452] ehci_hcd 0000:00:1d.7: debug port 1
[236124.596457] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[236124.596468] pci 0000:00:1e.0: setting latency timer to 64
[236124.596475] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[236124.596505] PIIX_IDE 0000:00:1f.1: setting latency timer to 64
[236124.596577] ahci 0000:00:1f.2: setting latency timer to 64
[236124.596807] tg3 0000:09:00.0: restoring config space at offset 0xc (was
0x0, writing 0x20200000)
[236124.596919] yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
[236124.596920] yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write
burst
[236124.736259] firewire_ohci 0000:03:01.4: restoring config space at offset
0x1 (was 0x2100117, writing 0x2180117)
[236124.808262] firewire_core: skipped bus generations, destroying all nodes
[236124.827171] serial 00:09: activated
[236124.855931] parport_pc 00:0a: activated
[236124.856716] sd 0:0:0:0: [sda] Starting disk
[236124.916226] ata3: SATA link down (SStatus 0 SControl 300)
[236124.924228] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[236125.047054] ata1.00: configured for UDMA/133
[236125.065585] do_drive_get_GTF: Run _GTF error: status = 0x5
[236125.067596] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[236125.069097] hda: UDMA/33 mode selected
[236125.308242] firewire_core: rediscovered device fw0
[236126.388226] usb 2-2: reset full speed USB device using uhci_hcd and address
2
[236126.559279] btusb 2-2:1.0: no reset_resume for driver btusb?
[236126.559283] btusb 2-2:1.1: no reset_resume for driver btusb?
[236126.976223] usb 7-1: reset full speed USB device using uhci_hcd and address
2
[236127.469281] usb 7-1.2: reset full speed USB device using uhci_hcd and
address 3
[236127.576326] pci 0000:00:02.0: restoring config space at offset 0x1 (was
0x900407, writing 0x900403)
[236127.576347] pci 0000:00:02.0: setting latency timer to 64
[236127.663974] Restarting tasks ... done.
[236129.520636] tg3 0000:09:00.0: PME# disabled
[236129.520762] tg3 0000:09:00.0: irq 30 for MSI/MSI-X
[236129.586504] ADDRCONF(NETDEV_UP): eth0: link is not ready
[236129.819097] Registered led device: iwl-phy1::radio
[236129.819120] Registered led device: iwl-phy1::assoc
[236129.819140] Registered led device: iwl-phy1::RX
[236129.819162] Registered led device: iwl-phy1::TX
[236129.888421] ADDRCONF(NETDEV_UP): eth1: link is not ready
[236129.903925] eth1: direct probe to AP e2:4d:2b:0b:56:d2 try 1
[236129.911769] eth1 direct probe responded
[236129.911773] eth1: authenticate with AP e2:4d:2b:0b:56:d2
[236129.915523] eth1: authenticated
[236129.915527] eth1: associate with AP e2:4d:2b:0b:56:d2
[236130.112044] eth1: associate with AP e2:4d:2b:0b:56:d2
[236130.312118] eth1: associate with AP e2:4d:2b:0b:56:d2
[236130.515558] eth1: association with AP e2:4d:2b:0b:56:d2 timed out
[236140.402110] eth1: authenticate with AP 00:1d:6a:83:f5:ff
[236140.404097] eth1: authenticated
[236140.404101] eth1: associate with AP 00:1d:6a:83:f5:ff
[236140.406788] eth1: RX AssocResp from 00:1d:6a:83:f5:ff (capab=0x431 status=0
aid=2)
[236140.406793] eth1: associated
[236140.430791] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[236150.656023] eth1: no IPv6 routers present
[236799.604055] eth1: no probe response from AP 00:1d:6a:83:f5:ff -
disassociating
[236892.687465] eth1: authenticate with AP 00:1d:6a:83:f5:ff
[236892.690166] eth1: authenticated
[236892.690172] eth1: associate with AP 00:1d:6a:83:f5:ff
[236892.696039] eth1: RX AssocResp from 00:1d:6a:83:f5:ff (capab=0x431 status=0
aid=1)
[236892.696046] eth1: associated
** Loaded modules:
Module Size Used by
snd_usb_audio 91440 0
snd_usb_lib 16640 1 snd_usb_audio
pwc 79952 0
videodev 37216 1 pwc
v4l1_compat 12964 1 videodev
v4l2_compat_ioctl32 9344 1 videodev
iwlagn 84960 0
tg3 100388 0
tun 14976 2
binfmt_misc 9292 1
i915 207368 2
drm 174640 3 i915
i2c_algo_bit 5988 1 i915
ppdev 7272 0
lp 10708 0
bridge 48208 0
stp 2900 1 bridge
bnep 13776 2
sco 11028 2
rfcomm 36016 4
l2cap 21152 16 bnep,rfcomm
nfsd 269520 9
lockd 68372 1 nfsd
nfs_acl 3296 1 nfsd
auth_rpcgss 40960 1 nfsd
sunrpc 198632 8 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 4656 1 nfsd
kvm_intel 46520 0
kvm 160600 1 kvm_intel
acpi_cpufreq 8912 0
cpufreq_conservative 7856 0
cpufreq_stats 4692 0
cpufreq_userspace 3652 0
cpufreq_powersave 1824 0
microcode 25208 0
fuse 60224 3
usbhid 37472 0
hid 41392 1 usbhid
dm_crypt 13144 0
coretemp 6688 0
loop 16012 0
firewire_sbp2 15568 0
btusb 12884 2
bluetooth 55604 9 bnep,sco,rfcomm,l2cap,btusb
ide_cd_mod 28600 0
cdrom 34376 1 ide_cd_mod
ide_pci_generic 4996 0
snd_hda_codec_idt 63904 1
ata_generic 5972 0
arc4 2080 2
ecb 3104 2
iwlcore 111264 1 iwlagn
snd_hda_intel 27656 4
snd_hda_codec 75952 2 snd_hda_codec_idt,snd_hda_intel
led_class 5080 1 iwlcore
snd_hwdep 8232 2 snd_usb_audio,snd_hda_codec
snd_pcm_oss 37232 0
snd_mixer_oss 15104 1 snd_pcm_oss
mac80211 139488 2 iwlagn,iwlcore
snd_pcm 79448 5
snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 7008 0
snd_rawmidi 23136 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 7744 1 snd_seq_midi
snd_seq 51360 2 snd_seq_midi,snd_seq_midi_event
snd_timer 21904 3 snd_pcm,snd_seq
pcmcia 27416 0
snd_seq_device 7508 3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 89848 3 iwlagn,iwlcore,mac80211
dell_laptop 3944 0
snd 64424 18
snd_usb_audio,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
rfkill 20552 3 bluetooth,cfg80211,dell_laptop
firewire_ohci 22516 0
yenta_socket 24972 1
video 22204 1 i915
libphy 25312 1 tg3
intel_agp 29104 1
processor 40188 3 acpi_cpufreq
firewire_core 47960 2 firewire_sbp2,firewire_ohci
output 3520 1 video
rsrc_nonstatic 10256 1 yenta_socket
soundcore 8160 1 snd
uhci_hcd 22256 0
ehci_hcd 34432 0
crc_itu_t 2752 1 firewire_core
pcmcia_core 37108 3 pcmcia,yenta_socket,rsrc_nonstatic
wmi 7520 0
snd_page_alloc 9952 2 snd_hda_intel,snd_pcm
i2c_i801 10432 0
piix 7432 0
i2c_core 24448 5 videodev,i915,drm,i2c_algo_bit,i2c_i801
dcdbas 8560 1 dell_laptop
ide_core 106592 3 ide_cd_mod,ide_pci_generic,piix
serio_raw 5908 0
button 6544 0
parport_pc 27256 1
psmouse 42396 0
evdev 10480 15
parport 38304 3 ppdev,lp,parport_pc
battery 7664 0
joydev 10976 0
ac 3760 0
ext3 122304 6
jbd 48456 1 ext3
mbcache 8836 1 ext3
dm_mod 68584 21 dm_crypt
sd_mod 34728 4
crc_t10dif 2128 1 sd_mod
thermal 15968 0
fan 5272 0
thermal_sys 16496 4 video,processor,thermal,fan
ahci 39408 3
libata 176076 2 ata_generic,ahci
scsi_mod 160320 3 firewire_sbp2,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA
controller])
Subsystem: Dell Latitude D630 [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f6e00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at eff8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6f00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f20 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f00 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 02)
Subsystem: Dell Dell Latitude D630 [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6dfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: f6c00000-f6cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: f6b00000-f6bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f6a00000-f6afffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller [8086:2815] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 6fa0 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 27
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=32]
Region 5: Memory at f6dfb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6dfb700 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev
21)
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6a00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: f4000000-f43ff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394)
[1217:00f7] (rev 02) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f6aff000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f6afe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5755M
Gigabit Ethernet PCI Express [14e4:1673] (rev 02)
Subsystem: Dell Device [1028:01f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f6bf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or
AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Device [8086:1121]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f6cfe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
-- System Information:
Debian Release: squeeze/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing'), (500,
'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.31-rc6-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.31-rc6-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.10-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.31-rc6-amd64 recommends:
ii 2.6.31~rc6-1~experimental.1~snapshot Binary firmware for various driver
Versions of packages linux-image-2.6.31-rc6-amd64 suggests:
ii grub-pc [grub] 1.96+20090829-1 GRand Unified Bootloader, version
pn linux-doc-2.6.31 <none> (no description available)
-- debconf information:
linux-image-2.6.31-rc6-amd64/postinst/depmod-error-initrd-2.6.31-rc6-amd64:
false
linux-image-2.6.31-rc6-amd64/prerm/removing-running-kernel-2.6.31-rc6-amd64:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.31-rc6-amd64/postinst/bootloader-test-error-2.6.31-rc6-amd64:
linux-image-2.6.31-rc6-amd64/preinst/initrd-2.6.31-rc6-amd64:
linux-image-2.6.31-rc6-amd64/postinst/bootloader-error-2.6.31-rc6-amd64:
linux-image-2.6.31-rc6-amd64/prerm/would-invalidate-boot-loader-2.6.31-rc6-amd64:
true
linux-image-2.6.31-rc6-amd64/postinst/missing-firmware-2.6.31-rc6-amd64:
--- End Message ---
