Package: linux-2.6 Version: 2.6.32-16 Severity: important I have been running linux-image-2.6.32-5-amd64 2.6.32-15 mostly without problems (except for #580889) since 2010-06-14 in debian squeeze running under Xen.
When I heard that -16 includes CONFIG_KPROBES I wanted to test it early. I installed the package from unstable with wget http://ftp.fi.debian.org/debian/pool/main/l/linux-2.6/linux-image-2.6.32-5-amd64_2.6.32-16_amd64.deb wget http://ftp.fi.debian.org/debian/pool/main/l/linux-2.6/linux-image-2.6.32-5-amd64-dbg_2.6.32-16_amd64.deb wget http://ftp.fi.debian.org/debian/pool/main/l/linux-2.6/linux-image-2.6.32-5-amd64-common_2.6.32-16_amd64.deb wget http://ftp.fi.debian.org/debian/pool/main/l/linux-2.6/linux-headers-2.6.32-5-amd64-common_2.6.32-16_amd64.deb wget http://ftp.fi.debian.org/debian/pool/main/l/linux-2.6/linux-headers-2.6.32-5-common_2.6.32-16_amd64.deb wget http://ftp.fi.debian.org/debian/pool/main/l/linux-2.6/linux-headers-2.6.32-5-amd64_2.6.32-16_amd64.deb wget http://ftp.fi.debian.org/debian/pool/main/l/linux-2.6/linux-base_2.6.32-16_all.deb sudo dpkg -i *.deb but boot stopped at [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-16) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jul 6 14:14:38 UTC 2010 [ 0.000000] Command line: root=/dev/xvda ro console=hvc0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000 [ 0.000000] RAMDISK: 016a5000 - 03085000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000080000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 000000000001ffff] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0080000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0003488000 - 00034a7000] XEN PAGETABLES ==> [0003488000 - 00034a7000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001684754] TEXT DATA BSS ==> [0001000000 - 0001684754] [ 0.000000] #4 [00016a5000 - 0003085000] RAMDISK ==> [00016a5000 - 0003085000] [ 0.000000] #5 [0003085000 - 0003488000] XEN START INFO ==> [0003085000 - 0003488000] [ 0.000000] #6 [0000100000 - 00004e1000] PGTABLE ==> [0000100000 - 00004e1000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 3.4.1_19718_04-2.1 (preserve-AD) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff8800034dd000 s90328 r8192 d24360 u122880 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516028 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/xvda ro console=hvc0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 2026096k/2097152k available (3067k kernel code, 384k absent, 70672k reserved, 1887k data, 588k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:288 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2393.998 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.99 BogoMIPS (lpj=9575992) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 0/0x3 -> Node 0 [ 0.004000] CPU: Unsupported number of siblings 4 [ 0.004000] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. [ 0.004000] SMP alternatives: switching to UP code [ 0.004256] installing Xen timer for CPU 1 [ 0.004299] SMP alternatives: switching to SMP code [ 0.000011] Initializing CPU#1 [ 0.000056] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000058] CPU: L2 cache: 4096K [ 0.000062] CPU 1/0x3 -> Node 0 [ 0.000065] CPU: Unsupported number of siblings 4 [ 0.008111] Brought up 2 CPUs [ 0.008244] devtmpfs: initialized [ 0.010738] Grant table initialized [ 0.010738] regulator: core version 0.5 [ 0.010738] NET: Registered protocol family 16 [ 0.012092] PCI: Fatal: No config space access function found [ 0.012450] bio: create slab <bio-0> at 0 [ 0.012450] ACPI: Interpreter disabled. [ 0.012450] xen_balloon: Initialising balloon driver. [ 0.012450] vgaarb: loaded [ 0.012450] PCI: System does not support PCI [ 0.012450] PCI: System does not support PCI [ 0.012450] Switching to clocksource xen [ 0.013525] pnp: PnP ACPI: disabled [ 0.013799] NET: Registered protocol family 2 [ 0.013980] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.015183] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.016788] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.017179] TCP: Hash tables configured (established 262144 bind 65536) [ 0.017186] TCP reno registered [ 0.017294] NET: Registered protocol family 1 [ 0.017387] Unpacking initramfs... [ 0.048660] Freeing initrd memory: 26496k freed [ 0.059989] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.060322] audit: initializing netlink socket (disabled) [ 0.060340] type=2000 audit(1278662017.485:1): initialized [ 0.063019] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.064516] VFS: Disk quotas dquot_6.5.2 [ 0.064572] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.064663] msgmni has been set to 4008 [ 0.064927] alg: No test for stdrng (krng) [ 0.064990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.064999] io scheduler noop registered [ 0.065004] io scheduler anticipatory registered [ 0.068938] io scheduler deadline registered [ 0.068938] io scheduler cfq registered (default) [ 0.147536] Linux agpgart interface v0.103 [ 0.147575] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.147766] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.147819] PNP: No PS/2 controller found. Probing ports directly. [ 0.148640] i8042.c: No controller found. [ 0.148712] mice: PS/2 mouse device common for all mice [ 0.148759] rtc_cmos: probe of rtc_cmos failed with error -16 [ 0.148786] cpuidle: using governor ladder [ 0.148792] cpuidle: using governor menu [ 0.148799] No iBFT detected. [ 0.149076] TCP cubic registered [ 0.149194] NET: Registered protocol family 10 [ 0.149632] lo: Disabled Privacy Extensions [ 0.149861] Mobile IPv6 [ 0.149867] NET: Registered protocol family 17 [ 0.149963] registered taskstats version 1 [ 0.149982] XENBUS: Device with no driver: device/vbd/51712 [ 0.149988] XENBUS: Device with no driver: device/vbd/51728 [ 0.149993] XENBUS: Device with no driver: device/vif/0 [ 0.149997] XENBUS: Device with no driver: device/console/0 [ 0.150013] /build/buildd-linux-2.6_2.6.32-16-amd64-pXyi6J/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.150038] Initalizing network drop monitor service [ 0.150104] Freeing unused kernel memory: 588k freed [ 0.150287] Write protecting the kernel read-only data: 4220k In this state the kernel does not react to any of the following commands: sudo xm sysrq lindi1 h sudo xm sysrq lindi1 s sudo xm sysrq lindi1 r sudo xm sysrq lindi1 b which suggests that the kernel is totally dead. With -15 the boot messages are [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010 [ 0.000000] Command line: root=/dev/xvda ro console=hvc0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000 [ 0.000000] RAMDISK: 016a1000 - 0307e000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000080000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 000000000001ffff] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0080000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0003481000 - 00034a0000] XEN PAGETABLES ==> [0003481000 - 00034a0000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001680314] TEXT DATA BSS ==> [0001000000 - 0001680314] [ 0.000000] #4 [00016a1000 - 000307e000] RAMDISK ==> [00016a1000 - 000307e000] [ 0.000000] #5 [000307e000 - 0003481000] XEN START INFO ==> [000307e000 - 0003481000] [ 0.000000] #6 [0000100000 - 00004e1000] PGTABLE ==> [0000100000 - 00004e1000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present [ 0.000000] APIC: disable apic facility [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 3.4.1_19718_04-2.1 (preserve-AD) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800034d6000 s90008 r8192 d20584 u118784 [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516028 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/xvda ro console=hvc0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 2026132k/2097152k available (3060k kernel code, 384k absent, 70636k reserved, 1885k data, 584k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:288 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2393.998 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.99 BogoMIPS (lpj=9575992) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 0/0x0 -> Node 0 [ 0.004000] CPU: Unsupported number of siblings 4 [ 0.004000] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. [ 0.004000] SMP alternatives: switching to UP code [ 0.004256] installing Xen timer for CPU 1 [ 0.004296] SMP alternatives: switching to SMP code [ 0.000011] Initializing CPU#1 [ 0.000056] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000059] CPU: L2 cache: 4096K [ 0.000062] CPU 1/0x0 -> Node 0 [ 0.000065] CPU: Unsupported number of siblings 4 [ 0.011074] Brought up 2 CPUs [ 0.011204] devtmpfs: initialized [ 0.014219] Grant table initialized [ 0.014219] regulator: core version 0.5 [ 0.014219] NET: Registered protocol family 16 [ 0.014219] PCI: Fatal: No config space access function found [ 0.016066] bio: create slab <bio-0> at 0 [ 0.016070] ACPI: Interpreter disabled. [ 0.016070] xen_balloon: Initialising balloon driver. [ 0.016070] vgaarb: loaded [ 0.016093] PCI: System does not support PCI [ 0.016093] PCI: System does not support PCI [ 0.016132] Switching to clocksource xen [ 0.017497] pnp: PnP ACPI: disabled [ 0.017757] NET: Registered protocol family 2 [ 0.017941] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.019183] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.020794] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.021188] TCP: Hash tables configured (established 262144 bind 65536) [ 0.021195] TCP reno registered [ 0.021301] NET: Registered protocol family 1 [ 0.021367] Unpacking initramfs... [ 0.052691] Freeing initrd memory: 26484k freed [ 0.063529] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.063830] audit: initializing netlink socket (disabled) [ 0.063847] type=2000 audit(1278663313.982:1): initialized [ 0.064602] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.066082] VFS: Disk quotas dquot_6.5.2 [ 0.066138] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.066228] msgmni has been set to 4009 [ 0.066520] alg: No test for stdrng (krng) [ 0.066591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.066602] io scheduler noop registered [ 0.070536] io scheduler anticipatory registered [ 0.070536] io scheduler deadline registered [ 0.070536] io scheduler cfq registered (default) [ 0.149547] Linux agpgart interface v0.103 [ 0.149587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.149785] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.149839] PNP: No PS/2 controller found. Probing ports directly. [ 0.150660] i8042.c: No controller found. [ 0.150728] mice: PS/2 mouse device common for all mice [ 0.150778] rtc_cmos: probe of rtc_cmos failed with error -16 [ 0.150805] cpuidle: using governor ladder [ 0.150811] cpuidle: using governor menu [ 0.150818] No iBFT detected. [ 0.151085] TCP cubic registered [ 0.151201] NET: Registered protocol family 10 [ 0.151632] lo: Disabled Privacy Extensions [ 0.151860] Mobile IPv6 [ 0.151867] NET: Registered protocol family 17 [ 0.151958] registered taskstats version 1 [ 0.151976] XENBUS: Device with no driver: device/vbd/51712 [ 0.151982] XENBUS: Device with no driver: device/vbd/51728 [ 0.151987] XENBUS: Device with no driver: device/vif/0 [ 0.151992] XENBUS: Device with no driver: device/console/0 [ 0.152021] /build/buildd-linux-2.6_2.6.32-15-amd64-PisqNL/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.152047] Initalizing network drop monitor service [ 0.152118] Freeing unused kernel memory: 584k freed [ 0.152296] Write protecting the kernel read-only data: 4208k Loading, please wait... [ 0.184507] udev: starting version 158 [ 0.226097] Initialising Xen virtual ethernet driver. [ 0.236524] blkfront: xvda: barriers enabled [ 0.236792] xvda: unknown partition table [ 0.248869] blkfront: xvdb: barriers enabled [ 0.249054] xvdb: unknown partition table Begin: Loading essential drivers ... [ 0.473159] nbd: registered device at major 43 done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Setting up nbd-client ... Failure: Insufficient information to set up nbd, quitting (nbdsrv= nbdport= nbdroot= root=) Begin: Loading[ 0.493366] md: linear personality registered for level -1 Success: loaded module linear. [ 0.496673] md: multipath personality registered for level -4 Success: loaded module multipath. [ 0.499504] md: raid0 personality registered for level 0 Success: loaded module raid0. [ 0.503467] md: raid1 personality registered for level 1 Success: loaded module raid1. [ 0.506094] async_tx: api initialized (async) [ 0.506541] xor: automatically using best checksumming function: generic_sse [ 0.524008] generic_sse: 2616.000 MB/sec [ 0.524014] xor: using function: generic_sse (2616.000 MB/sec) [ 0.592006] raid6: int64x1 1995 MB/s [ 0.660029] raid6: int64x2 2699 MB/s [ 0.728038] raid6: int64x4 2115 MB/s [ 0.796034] raid6: int64x8 1814 MB/s [ 0.864018] raid6: sse2x1 3985 MB/s [ 0.932018] raid6: sse2x2 4203 MB/s [ 1.000044] raid6: sse2x4 6372 MB/s [ 1.000050] raid6: using algorithm sse2x4 (6372 MB/s) [ 1.003857] md: raid6 personality registered for level 6 [ 1.003865] md: raid5 personality registered for level 5 [ 1.003870] md: raid4 personality registered for level 4 Success: loaded module raid456. Success: loaded module raid5. Success: loaded module raid6. [ 1.012709] md: raid10 personality registered for level 10 Success: loaded module raid10. done. Begin: Assembling all MD arrays ... mdadm: No arrays found in config file or automatically Failure: failed to assemble all arrays. done. done. Begin: Running /scripts/local-premount ... done. [ 1.057208] kjournald starting. Commit interval 5 seconds [ 1.057226] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevdudevd[206]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:6 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:10 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:14 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:18 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:20 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:24 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:26 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:28 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:30 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:32 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:34 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:36 udevd[206]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/52-nut-usbups.rules:38 [removed hundreds of lines from udevd] udevd[207]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/z60_xserver-xorg-input-wacom.rules:71 udevd[207]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/z60_xserver-xorg-input-wacom.rules:72 udevd[207]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/z60_xserver-xorg-input-wacom.rules:73 udevd[207]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/z60_xserver-xorg-input-wacom.rules:78 [ 4.610051] input: PC Speaker as /devices/platform/pcspkr/input/input1 done. Setting parameters of disc: (none). @Activating swap...[ 5.648619] Adding 6291448k swap on /dev/xvdb. Priority:-1 extents:1 across:6291448k SS done. Checking root file system...fsck from util-linux-ng 2.17.2 /dev/xvda: clean, 519373/1638400 files, 5956632/6553600 blocks done. [ 5.857372] EXT3 FS on xvda, internal journal Cleaning up ifupdown.... Setting up networking.... [ 6.045779] loop: module loaded Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux-ng 2.17.2 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Setting kernel variables ...done. Configuring network interfaces...[ 7.306534] Bridge firewalling registered [ 7.336191] device eth0 entered promiscuous mode [ 7.346179] br0: port 1(eth0) entering learning state Waiting for br0 to get ready (MAXWAIT is 20 seconds). [ 16.344025] br0: port 1(eth0) entering forwarding state Starting portmap daemon.... Starting NFS common utilities: statd. mount.nfs: Failed to resolve server nfs: Temporary failure in name resolution done. Starting portmap daemon...Already running.. Starting NFS common utilities: statd. Cleaning up temporary files.... Setting up ALSA...done (none loaded). Setting console screen modes and fonts. cannot (un)set powersave mode 9;30]14;30][ 17.623522] fuse init (API version 7.13) Recovering schroot sessions:. Running scripts in rcS.d/ took 16 seconds. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done. Starting NFS common utilities: statd. Starting portmap daemon...Already running.. Enabling additional executable binary formats: binfmt-support. Starting enhanced syslogd: rsyslogd. Starting web server: apache2apache2: apr_sockaddr_info_get() failed for lindi1 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName . Starting domain name service...: bind9. Starting periodic command scheduler: cron. Starting system message bus: dbus. Starting MTA:nut disabled, please adjust the configuration to your needs. Then set MODE to a suitable value in /etc/nut/nut.conf to enable it. SSL tunnels disabled, see /etc/default/stunnel4 Starting Nagios Service Check Acceptor: nsca. Starting NTP server: ntpd. Starting OpenBSD Secure Shell server: sshd. exim4. Starting nagios3 monitoring daemon: nagios3. [ 22.793187] RPC: Registered udp transport module. [ 22.793197] RPC: Registered tcp transport module. [ 22.793203] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 22.837231] Slow work thread pool: Starting up [ 22.837312] Slow work thread pool: Ready [ 22.837383] FS-Cache: Loaded [ 22.893685] FS-Cache: Netfs 'nfs' registered for caching [ 23.006650] svc: failed to register lockdv1 RPC service (errno 97). Running scripts in rc2.d/ took 5 seconds. Debian GNU/Linux squeeze/sid lindi1 hvc0 lindi1 login: In this state the kernel does react to sudo xm sysrq lindi1 h with SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) as expected. The following information is naturally about -15 since I can not boot -16: -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010 ** Command line: root=/dev/xvda ro console=hvc0 ** Not tainted ** Kernel log: [ 0.016093] PCI: System does not support PCI [ 0.016093] PCI: System does not support PCI [ 0.016132] Switching to clocksource xen [ 0.017497] pnp: PnP ACPI: disabled [ 0.017757] NET: Registered protocol family 2 [ 0.017941] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.019183] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.020794] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.021188] TCP: Hash tables configured (established 262144 bind 65536) [ 0.021195] TCP reno registered [ 0.021301] NET: Registered protocol family 1 [ 0.021367] Unpacking initramfs... [ 0.052691] Freeing initrd memory: 26484k freed [ 0.063529] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.063830] audit: initializing netlink socket (disabled) [ 0.063847] type=2000 audit(1278663313.982:1): initialized [ 0.064602] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.066082] VFS: Disk quotas dquot_6.5.2 [ 0.066138] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.066228] msgmni has been set to 4009 [ 0.066520] alg: No test for stdrng (krng) [ 0.066591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.066602] io scheduler noop registered [ 0.070536] io scheduler anticipatory registered [ 0.070536] io scheduler deadline registered [ 0.070536] io scheduler cfq registered (default) [ 0.149547] Linux agpgart interface v0.103 [ 0.149587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.149785] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.149839] PNP: No PS/2 controller found. Probing ports directly. [ 0.150660] i8042.c: No controller found. [ 0.150728] mice: PS/2 mouse device common for all mice [ 0.150778] rtc_cmos: probe of rtc_cmos failed with error -16 [ 0.150805] cpuidle: using governor ladder [ 0.150811] cpuidle: using governor menu [ 0.150818] No iBFT detected. [ 0.151085] TCP cubic registered [ 0.151201] NET: Registered protocol family 10 [ 0.151632] lo: Disabled Privacy Extensions [ 0.151860] Mobile IPv6 [ 0.151867] NET: Registered protocol family 17 [ 0.151951] PM: Resume from disk failed. [ 0.151958] registered taskstats version 1 [ 0.151976] XENBUS: Device with no driver: device/vbd/51712 [ 0.151982] XENBUS: Device with no driver: device/vbd/51728 [ 0.151987] XENBUS: Device with no driver: device/vif/0 [ 0.151992] XENBUS: Device with no driver: device/console/0 [ 0.152021] /build/buildd-linux-2.6_2.6.32-15-amd64-PisqNL/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.152047] Initalizing network drop monitor service [ 0.152118] Freeing unused kernel memory: 584k freed [ 0.152296] Write protecting the kernel read-only data: 4208k [ 0.184507] udev: starting version 158 [ 0.226097] Initialising Xen virtual ethernet driver. [ 0.236524] blkfront: xvda: barriers enabled [ 0.236792] xvda: unknown partition table [ 0.248869] blkfront: xvdb: barriers enabled [ 0.249054] xvdb: unknown partition table [ 0.473159] nbd: registered device at major 43 [ 0.493366] md: linear personality registered for level -1 [ 0.496673] md: multipath personality registered for level -4 [ 0.499504] md: raid0 personality registered for level 0 [ 0.503467] md: raid1 personality registered for level 1 [ 0.506094] async_tx: api initialized (async) [ 0.506541] xor: automatically using best checksumming function: generic_sse [ 0.524008] generic_sse: 2616.000 MB/sec [ 0.524014] xor: using function: generic_sse (2616.000 MB/sec) [ 0.592006] raid6: int64x1 1995 MB/s [ 0.660029] raid6: int64x2 2699 MB/s [ 0.728038] raid6: int64x4 2115 MB/s [ 0.796034] raid6: int64x8 1814 MB/s [ 0.864018] raid6: sse2x1 3985 MB/s [ 0.932018] raid6: sse2x2 4203 MB/s [ 1.000044] raid6: sse2x4 6372 MB/s [ 1.000050] raid6: using algorithm sse2x4 (6372 MB/s) [ 1.003857] md: raid6 personality registered for level 6 [ 1.003865] md: raid5 personality registered for level 5 [ 1.003870] md: raid4 personality registered for level 4 [ 1.012709] md: raid10 personality registered for level 10 [ 1.057208] kjournald starting. Commit interval 5 seconds [ 1.057226] EXT3-fs: mounted filesystem with ordered data mode. [ 3.240597] udev: starting version 158 [ 4.610051] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 5.648619] Adding 6291448k swap on /dev/xvdb. Priority:-1 extents:1 across:6291448k SS [ 5.857372] EXT3 FS on xvda, internal journal [ 6.045779] loop: module loaded [ 7.306534] Bridge firewalling registered [ 7.336191] device eth0 entered promiscuous mode [ 7.346179] br0: port 1(eth0) entering learning state [ 16.344025] br0: port 1(eth0) entering forwarding state [ 17.623522] fuse init (API version 7.13) [ 17.860012] eth0: no IPv6 routers present [ 18.229009] br0: no IPv6 routers present [ 22.793187] RPC: Registered udp transport module. [ 22.793197] RPC: Registered tcp transport module. [ 22.793203] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 22.837231] Slow work thread pool: Starting up [ 22.837312] Slow work thread pool: Ready [ 22.837383] FS-Cache: Loaded [ 22.893685] FS-Cache: Netfs 'nfs' registered for caching [ 23.006650] svc: failed to register lockdv1 RPC service (errno 97). ** Model information not available ** Loaded modules: Module Size Used by nfs 240826 1 lockd 57603 1 nfs fscache 29834 1 nfs nfs_acl 2031 1 nfs auth_rpcgss 33460 1 nfs sunrpc 161317 11 nfs,lockd,nfs_acl,auth_rpcgss binfmt_misc 6431 1 fuse 50190 1 bridge 39598 0 stp 1440 1 bridge loop 11783 0 pcspkr 1699 0 evdev 7352 0 ext3 106518 1 jbd 37085 1 ext3 mbcache 5050 1 ext3 raid10 17697 0 raid456 44500 0 async_raid6_recov 5170 1 raid456 async_pq 3479 2 raid456,async_raid6_recov raid6_pq 77179 2 async_raid6_recov,async_pq async_xor 2478 3 raid456,async_raid6_recov,async_pq xor 4380 1 async_xor async_memcpy 1198 2 raid456,async_raid6_recov async_tx 1734 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy raid1 18191 0 raid0 5517 0 multipath 6059 0 linear 3455 0 md_mod 73664 6 raid10,raid456,raid1,raid0,multipath,linear nbd 7985 0 xen_netfront 15180 0 xen_blkfront 8102 2 ** PCI devices: ** Sound cards: -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=fi_FI (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs ii linux-base 2.6.32-15 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-15 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: ii grub-legacy [grub] 0.97-61 GRand Unified Bootloader (Legacy v ii linux-doc-2.6.32 2.6.32-15 Linux kernel specific documentatio Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/84bpah9gl3....@sauna.l.org
