--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-6
Severity: critical
After running 2.6.32 (as well as 2.6.31 and 2.6.30) for several minutes,
computer freezes completely. Network or alt-sysrq-b do not work.
Further investigation showed that data is being corrupted while reading
or writing files.
Corruption on reading is easily reproduced with debsums (it fails on
random files), corruption on writing happened at least once (under
2.6.32-trunk-amd64) and looks like:
@@ -952522,14 +952522,14 @@
00e88cb0 6d c5 a3 fa 5a 65 87 7c 83 a4 ee ce a9 2e b9 5f |m...Ze.|......._|
00e88cc0 e1 bf 23 e7 1d 2e b6 2f e7 11 ff df e4 3c fa f7 |..#..../.....<..|
00e88cd0 f6 e5 3c fc bf 37 e7 41 77 12 1d 37 79 0c 17 4d |..<..7.Aw..7y..M|
-00e88ce0 ee db 1a 93 5d e7 92 5d 7f 35 39 cf 5d 8b 8c f7 |....]..].59.]...|
-00e88cf0 39 6c 55 14 9e ba 55 ab fc a5 84 06 95 b1 e4 5b |9lU...U........[|
-00e88d00 6e 05 5e db f7 dc 15 1b 83 4b e5 7b bc 36 74 c5 |n.^......K.{.6t.|
-00e88d10 05 12 1e 4c c9 34 39 4b a6 64 fa 53 83 67 4a 2b |...L.49K.d.S.gJ+|
-00e88d20 c9 e5 99 6d a6 8c 7a 1c 9b a3 57 8a ab e5 cc d6 |...m..z...W.....|
-00e88d30 b2 49 1d 9d de 48 54 20 65 93 d4 c8 4a 9d 23 25 |.I...HT e...J.#%|
-00e88d40 c2 94 44 97 e0 92 68 5f 01 04 85 9c 63 aa dd 17 |..D...h_....c...|
-00e88d50 72 ee 03 54 bb e3 45 d7 60 e6 37 92 0d cc b4 af |r..T..E.`.7.....|
+00e88ce0 ee db 1a 93 5d e7 b0 48 7f 15 76 35 18 80 e3 b6 |....]..H..v5....|
+00e88cf0 78 7e a3 c3 9e 03 54 fb 77 85 14 09 15 7d 31 be |x~....T.w....}1.|
+00e88d00 9b 0d 40 8e 3c a7 7b e4 0d 2e 17 d0 a3 18 4f 87
|....@.<.{.......O.|
+00e88d10 56 d8 75 24 54 94 65 39 77 58 e3 5c 01 34 8b a6 |V.u$T.e9wX.\.4..|
+00e88d20 e4 f9 e4 2a 26 21 ef b0 9a 90 b3 b0 f8 f3 42 76 |...*&!........Bv|
+00e88d30 ff ae 1b 80 15 63 49 b4 e9 b5 96 c3 0f df 18 25 |.....cI........%|
+00e88d40 1f 65 b0 b4 3e 8c 9e 3c 33 75 e2 78 19 c3 2a 05 |.e..>..<3u.x..*.|
+00e88d50 ae 4d 36 e8 c2 38 cc 97 cf 49 6f 5a 3c 6f 09 90 |.M6..8...IoZ<o..|
00e88d60 45 75 9e e2 2e c5 29 91 d7 3a d1 79 ae e3 92 09 |Eu....)..:.y....|
00e88d70 56 d7 a4 18 92 b1 d7 42 68 50 04 1c 86 8c 04 96 |V......BhP......|
00e88d80 13 56 e9 d7 b2 2a 6d 43 a0 b9 ff da dc e0 e0 ed |.V...*mC........|
The system has radeon video card, but DRI is disabled and radeon kernel
module is not loaded. I tried to disable ethernet, firewire, jmicron,
sound, "C1E Support", but this did not help, though after blacklisting
asus_atk0110 it took longer time to get random errors from debsums.
Debsums failures, random segfaults and total freezing can also be
reproduced under single-user mode. There are no messages on console when
system freezes.
Under 2.6.26 there is no sign of these problems, computer only suffers
from #518643.
-- Package-specific info:
** Version:
Linux version 2.6.32-1-amd64 (Debian 2.6.32-6) (b...@decadent.org.uk) (gcc
version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Mon Feb 1 19:11:44 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-1-amd64 root=/dev/mapper/main-root ro
** Not tainted
** Kernel log:
[ 4.013522] md: linear personality registered for level -1
[ 4.017728] md: multipath personality registered for level -4
[ 4.021853] md: raid0 personality registered for level 0
[ 4.026819] md: raid1 personality registered for level 1
[ 4.030585] async_tx: api initialized (async)
[ 4.031173] xor: automatically using best checksumming function: generic_sse
[ 4.049501] generic_sse: 10182.000 MB/sec
[ 4.049529] xor: using function: generic_sse (10182.000 MB/sec)
[ 4.117508] raid6: int64x1 2378 MB/s
[ 4.185506] raid6: int64x2 2967 MB/s
[ 4.253524] raid6: int64x4 2296 MB/s
[ 4.321516] raid6: int64x8 1838 MB/s
[ 4.389500] raid6: sse2x1 4679 MB/s
[ 4.457501] raid6: sse2x2 5288 MB/s
[ 4.525503] raid6: sse2x4 7914 MB/s
[ 4.525531] raid6: using algorithm sse2x4 (7914 MB/s)
[ 4.529401] md: raid6 personality registered for level 6
[ 4.529430] md: raid5 personality registered for level 5
[ 4.529459] md: raid4 personality registered for level 4
[ 4.550751] md: raid10 personality registered for level 10
[ 4.574865] device-mapper: uevent: version 1.0.3
[ 4.575328] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 4.820090] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.820123] EXT3-fs: write access will be enabled during recovery.
[ 5.256548] kjournald starting. Commit interval 5 seconds
[ 5.256589] EXT3-fs: dm-0: orphan cleanup on readonly fs
[ 5.256620] ext3_orphan_cleanup: deleting unreferenced inode 4669453
[ 5.256638] EXT3-fs: dm-0: 1 orphan inode deleted
[ 5.256666] EXT3-fs: recovery complete.
[ 5.274517] EXT3-fs: mounted filesystem with journal data mode.
[ 6.324146] usb-storage: device scan complete
[ 6.324647] scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00
PQ: 0 ANSI: 0
[ 6.325145] scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01
PQ: 0 ANSI: 0
[ 6.325646] scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02
PQ: 0 ANSI: 0
[ 6.326140] scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03
PQ: 0 ANSI: 0
[ 6.326470] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 6.326590] sd 10:0:0:1: Attached scsi generic sg3 type 0
[ 6.326707] sd 10:0:0:2: Attached scsi generic sg4 type 0
[ 6.326826] sd 10:0:0:3: Attached scsi generic sg5 type 0
[ 6.330261] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 6.331006] sd 10:0:0:1: [sdc] Attached SCSI removable disk
[ 6.331761] sd 10:0:0:2: [sdd] Attached SCSI removable disk
[ 6.332380] sd 10:0:0:3: [sde] Attached SCSI removable disk
[ 6.614352] udevd version 125 started
[ 7.042120] ACPI: SSDT 00000000cff880d0 00235 (v01 DpgPmm P001Ist 00000011
INTL 20060113)
[ 7.042621] ACPI: SSDT 00000000cff889d0 004B2 (v01 PmRef P001Cst 00003001
INTL 20060113)
[ 7.063704] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 7.063745] ACPI: Power Button [PWRB]
[ 7.076013] Monitor-Mwait will be used to enter C-1 state
[ 7.112019] Monitor-Mwait will be used to enter C-2 state
[ 7.126884] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.136070] Monitor-Mwait will be used to enter C-3 state
[ 7.136078] Marking TSC unstable due to TSC halts in idle
[ 7.136185] processor LNXCPU:00: registered as cooling_device0
[ 7.136266] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.136303] ACPI: Power Button [PWRF]
[ 7.136798] ACPI: SSDT 00000000cff88310 00235 (v01 DpgPmm P002Ist 00000012
INTL 20060113)
[ 7.137177] ACPI: SSDT 00000000cff88e90 00085 (v01 PmRef P002Cst 00003000
INTL 20060113)
[ 7.172014] Switching to clocksource hpet
[ 7.185641] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 7.185684] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with
ACPI region SMRG [0x400-0x40f]
[ 7.185724] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 7.248722] processor LNXCPU:01: registered as cooling_device1
[ 7.249195] ACPI: SSDT 00000000cff88550 00235 (v01 DpgPmm P003Ist 00000012
INTL 20060113)
[ 7.249585] ACPI: SSDT 00000000cff88f20 00085 (v01 PmRef P003Cst 00003000
INTL 20060113)
[ 7.300494] processor LNXCPU:02: registered as cooling_device2
[ 7.301008] ACPI: SSDT 00000000cff88790 00235 (v01 DpgPmm P004Ist 00000012
INTL 20060113)
[ 7.301403] ACPI: SSDT 00000000cff88fb0 00085 (v01 PmRef P004Cst 00003000
INTL 20060113)
[ 7.401614] processor LNXCPU:03: registered as cooling_device3
[ 7.644007] alloc irq_desc for 22 on node -1
[ 7.644010] alloc kstat_irqs on node -1
[ 7.644017] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 7.644099] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.806981] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 7.807070] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 8.317498] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 9.757578] EXT3 FS on dm-0, internal journal
[ 10.515727] loop: module loaded
[ 11.565965] fuse init (API version 7.13)
[ 11.639554] kjournald starting. Commit interval 5 seconds
[ 11.639965] EXT3 FS on sda1, internal journal
[ 11.640033] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.649752] kjournald starting. Commit interval 5 seconds
[ 11.651842] EXT3 FS on dm-1, internal journal
[ 11.651897] EXT3-fs: mounted filesystem with journal data mode.
[ 12.339918] Bridge firewalling registered
[ 12.356777] device eth1 entered promiscuous mode
[ 12.357791] alloc irq_desc for 30 on node -1
[ 12.357793] alloc kstat_irqs on node -1
[ 12.357806] ATL1E 0000:02:00.0: irq 30 for MSI/MSI-X
[ 12.357940] ATL1E 0000:02:00.0: ATL1E: eth1 NIC Link is Up<100 Mbps Full
Duplex>
[ 12.358912] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.359991] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.361494] br0: port 1(eth1) entering learning state
[ 22.620097] eth1: no IPv6 routers present
[ 23.184087] br0: no IPv6 routers present
[ 27.360101] br0: port 1(eth1) entering forwarding state
[ 34.374970] lp: driver loaded but no devices found
[ 34.394722] ppdev: user-space parallel port driver
[ 38.736333] mtrr: type mismatch for d0000000,10000000 old: write-back new:
write-combining
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0602
board_vendor: ASUSTeK Computer INC.
board_name: P5Q TURBO
board_version: Rev 1.xx
** Loaded modules:
Module Size Used by
kvm_intel 39648 0
kvm 225848 1 kvm_intel
ppdev 5190 0
parport_pc 19447 0
lp 7766 0
parport 29458 3 ppdev,parport_pc,lp
bridge 43070 0
stp 1504 1 bridge
fuse 54110 3
dm_crypt 11051 0
coretemp 4357 0
loop 12551 0
snd_hda_codec_atihdmi 2427 1
snd_hda_codec_via 25617 1
snd_hda_intel 20467 0
snd_hda_codec 58404 3
snd_hda_codec_atihdmi,snd_hda_codec_via,snd_hda_intel
asus_atk0110 7990 0
snd_hwdep 5748 1 snd_hda_codec
psmouse 52033 0
snd_pcm 64935 2 snd_hda_intel,snd_hda_codec
snd_seq 46305 0
snd_timer 16686 2 snd_pcm,snd_seq
evdev 7832 3
i2c_i801 7958 0
serio_raw 4056 0
snd_seq_device 4845 1 snd_seq
i2c_core 16745 1 i2c_i801
pcspkr 1811 0
intel_agp 26553 0
button 4906 0
processor 30823 4
snd 49774 7
snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 4886 1 snd
snd_page_alloc 6585 2 snd_hda_intel,snd_pcm
ext3 111910 3
jbd 39853 1 ext3
mbcache 5322 1 ext3
dm_mirror 11547 0
dm_region_hash 7187 1 dm_mirror
dm_log 7973 2 dm_mirror,dm_region_hash
dm_snapshot 19673 0
dm_mod 57898 19 dm_crypt,dm_mirror,dm_log,dm_snapshot
raid10 18801 0
raid456 46116 0
async_raid6_recov 5250 1 raid456
async_pq 3559 2 raid456,async_raid6_recov
raid6_pq 77435 2 async_raid6_recov,async_pq
async_xor 2574 3 raid456,async_raid6_recov,async_pq
xor 4476 1 async_xor
async_memcpy 1214 2 raid456,async_raid6_recov
async_tx 1862 5
raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 19183 0
raid0 5805 0
multipath 6379 0
linear 3695 0
md_mod 77744 6 raid10,raid456,raid1,raid0,multipath,linear
sg 19448 0
sr_mod 13226 0
cdrom 30663 1 sr_mod
sd_mod 30905 3
crc_t10dif 1308 1 sd_mod
usb_storage 39689 0
pata_jmicron 2344 0
ahci 32822 2
ata_generic 3047 0
libata 138727 3 pata_jmicron,ahci,ata_generic
scsi_mod 127349 5 sg,sr_mod,sd_mod,usb_storage,libata
atl1e 28401 0
ide_pci_generic 2820 0
firewire_ohci 20604 0
firewire_core 39104 1 firewire_ohci
crc_itu_t 1339 1 firewire_core
ide_core 81922 1 ide_pci_generic
uhci_hcd 19417 0
ehci_hcd 32082 0
usbcore 129847 4 usb_storage,uhci_hcd,ehci_hcd
nls_base 6633 1 usbcore
thermal 12314 0
fan 3554 0
thermal_sys 12454 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root
Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ac00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ae]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe7f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f03fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA
AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9880 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9480 [size=4]
Region 4: I/O ports at 9400 [size=32]
Region 5: Memory at fe7fe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7ff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Mobility Radeon
HD 3600 Series [1002:9598] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:01d6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at b000 [size=256]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device [0403]: ATI Technologies Inc RV635 Audio device [Radeon HD
3600 Series] [1002:aa20]
Subsystem: ASUSTeK Computer Inc. Device [1043:aa20]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit
Ethernet Adapter [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8226]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at cc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
Kernel modules: atl1e
03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMB361 AHCI/IDE
[197b:2361] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at feafa000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at feae0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMB361 AHCI/IDE
[197b:2361] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: ata_generic, pata_jmicron, ide-pci-generic
04:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. Device [1106:3403]
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8384]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febff800 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at e800 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card
Reader/Writer (Internal/External)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (900, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-1-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf-show failed
--- End Message ---
signature.asc
