Package: linux-2.6
Version: 2.6.32-15
Severity: important
apt-get upgrade fails. The kernel installation/upgrade throws the following
error.
dpkg: error processing linux-image-2.6.32-5-686-bigmem (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of linux-image-2.6-686-bigmem:
linux-image-2.6-686-bigmem depends on linux-image-2.6.32-5-686-bigmem; however:
Package linux-image-2.6.32-5-686-bigmem is not configured yet.
dpkg: error processing linux-image-2.6-686-bigmem (--configure):
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-15) (b...@decadent.org.uk)
(gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 05:38:08 UTC 2010
** Command line:
root=/dev/mapper/vg0-root ro
** Not tainted
** Kernel log:
[ 8.397930] i2c /dev entries driver
[ 9.068277] Adding 4194296k swap on /dev/mapper/vg0-swap. Priority:-1
extents:1 across:4194296k
[ 10.862917] kjournald starting. Commit interval 5 seconds
[ 10.863322] EXT3 FS on sda1, internal journal
[ 10.863350] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.888701] kjournald starting. Commit interval 5 seconds
[ 10.889126] EXT3 FS on dm-5, internal journal
[ 10.889153] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.931411] kjournald starting. Commit interval 5 seconds
[ 10.931806] EXT3 FS on dm-2, internal journal
[ 10.933125] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.966933] kjournald starting. Commit interval 5 seconds
[ 10.968622] EXT3 FS on dm-1, internal journal
[ 10.969940] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.007384] kjournald starting. Commit interval 5 seconds
[ 11.009139] EXT3 FS on dm-4, internal journal
[ 11.010510] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.212180] e1000e 0000:00:19.0: irq 24 for MSI/MSI-X
[ 12.268116] e1000e 0000:00:19.0: irq 24 for MSI/MSI-X
[ 12.268303] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.012775] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
None
[ 14.014442] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 14.016277] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.364493] fuse init (API version 7.13)
[ 22.236487] Bluetooth: Core ver 2.15
[ 22.236526] NET: Registered protocol family 31
[ 22.236528] Bluetooth: HCI device and connection manager initialized
[ 22.236530] Bluetooth: HCI socket layer initialized
[ 22.304049] Bluetooth: L2CAP ver 2.14
[ 22.304051] Bluetooth: L2CAP socket layer initialized
[ 22.308120] Bluetooth: RFCOMM TTY layer initialized
[ 22.308123] Bluetooth: RFCOMM socket layer initialized
[ 22.308125] Bluetooth: RFCOMM ver 1.11
[ 22.984577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.984580] Bluetooth: BNEP filters: protocol multicast
[ 23.020125] Bridge firewalling registered
[ 23.192968] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.192972] Bluetooth: SCO socket layer initialized
[ 24.472507] eth0: no IPv6 routers present
[ 191.529097] RPC: Registered udp transport module.
[ 191.529100] RPC: Registered tcp transport module.
[ 191.529102] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 191.554535] Slow work thread pool: Starting up
[ 191.554566] Slow work thread pool: Ready
[ 191.554603] FS-Cache: Loaded
[ 191.600985] FS-Cache: Netfs 'nfs' registered for caching
[ 191.617911] svc: failed to register lockdv1 RPC service (errno 97).
[ 194.981510] CPU0 attaching NULL sched-domain.
[ 194.981514] CPU1 attaching NULL sched-domain.
[ 195.096123] CPU0 attaching sched-domain:
[ 195.096126] domain 0: span 0-1 level MC
[ 195.096129] groups: 0 1
[ 195.096133] CPU1 attaching sched-domain:
[ 195.096135] domain 0: span 0-1 level MC
[ 195.096137] groups: 1 0
[ 2050.016945] svc: failed to register lockdv1 RPC service (errno 97).
[11041.298847] svc: failed to register lockdv1 RPC service (errno 97).
[28168.325019] svc: failed to register lockdv1 RPC service (errno 97).
[59893.007900] svc: failed to register lockdv1 RPC service (errno 97).
[64097.377740] svc: failed to register lockdv1 RPC service (errno 97).
[71519.292539] svc: failed to register lockdv1 RPC service (errno 97).
[73320.314925] svc: failed to register lockdv1 RPC service (errno 97).
[74823.724036] usb 8-2: new full speed USB device using uhci_hcd and address 2
[74823.897079] usb 8-2: New USB device found, idVendor=0421, idProduct=0208
[74823.897083] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[74823.897085] usb 8-2: Product: Nokia 5130c-2
[74823.897087] usb 8-2: Manufacturer: Nokia
[74823.897181] usb 8-2: configuration #1 chosen from 1 choice
[74823.976155] cdc_acm 8-2:1.1: ttyACM0: USB ACM device
[74823.979177] usbcore: registered new interface driver cdc_acm
[74823.979223] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems
and ISDN adapters
[74823.983475] NET: Registered protocol family 35
[74823.998747] usbcore: registered new interface driver cdc_phonet
[74824.016383] usbcore: registered new interface driver cdc_ether
[74824.019174] usb 8-2: bad CDC descriptors
[74824.019193] usbcore: registered new interface driver rndis_host
[74824.041845] cfg80211: Using static regulatory domain info
[74824.041848] cfg80211: Regulatory domain: US
[74824.041849] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[74824.041852] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[74824.041855] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[74824.041858] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[74824.041860] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[74824.041863] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[74824.041866] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[74824.041871] cfg80211: Calling CRDA for country: US
[74824.049237] usb 8-2: bad CDC descriptors
[74824.049278] usbcore: registered new interface driver rndis_wlan
[74938.824135] usb 8-2: USB disconnect, address 2
[76554.506748] gvfsd-metadata[12610]: segfault at 8 ip 0804d2da sp bf9689c0
error 4 in gvfsd-metadata[8048000+c000]
[77356.412273] svc: failed to register lockdv1 RPC service (errno 97).
[78039.597428] svc: failed to register lockdv1 RPC service (errno 97).
[80257.737081] svc: failed to register lockdv1 RPC service (errno 97).
[90734.760668] svc: failed to register lockdv1 RPC service (errno 97).
[99185.695766] svc: failed to register lockdv1 RPC service (errno 97).
[114357.301315] svc: failed to register lockdv1 RPC service (errno 97).
[126838.401742] svc: failed to register lockdv1 RPC service (errno 97).
[129060.210271] svc: failed to register lockdv1 RPC service (errno 97).
[140092.335709] svc: failed to register lockdv1 RPC service (errno 97).
[149839.812114] svc: failed to register lockdv1 RPC service (errno 97).
** Model information
not available
** Loaded modules:
Module Size Used by
rndis_wlan 15984 0
cfg80211 87605 1 rndis_wlan
rndis_host 4223 1 rndis_wlan
cdc_ether 2633 1 rndis_host
usbnet 9527 3 rndis_wlan,rndis_host,cdc_ether
cdc_phonet 3118 0
mii 2714 1 usbnet
phonet 12540 1 cdc_phonet
cdc_acm 11394 0
nfs 206782 2
lockd 49437 1 nfs
fscache 24662 1 nfs
nfs_acl 1695 1 nfs
auth_rpcgss 25240 1 nfs
sunrpc 134604 15 nfs,lockd,nfs_acl,auth_rpcgss
sco 5857 2
bridge 32987 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25167 0
l2cap 21705 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36327 6 sco,bnep,rfcomm,l2cap
rfkill 10264 3 cfg80211,bluetooth
acpi_cpufreq 4943 0
cpufreq_userspace 1480 2
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
autofs4 16667 2
binfmt_misc 4907 1
fuse 43758 1
i2c_dev 3541 0
coretemp 3281 0
loop 9757 0
snd_hda_codec_intelhdmi 9027 1
snd_hda_codec_realtek 163214 1
snd_hda_intel 16787 0
snd_hda_codec 46002 3
snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47370 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
i915 220464 2
snd_seq_midi 3576 0
drm_kms_helper 18305 1 i915
snd_rawmidi 12505 1 snd_seq_midi
drm 112628 3 i915,drm_kms_helper
snd_seq_midi_event 3684 1 snd_seq_midi
i2c_i801 6466 0
i2c_algo_bit 3497 1 i915
i2c_core 12696 6
i2c_dev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 34363 12
snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
snd_page_alloc 5113 2 snd_hda_intel,snd_pcm
pcspkr 1207 0
processor 26607 3 acpi_cpufreq
button 3598 1 i915
parport_pc 15871 0
parport 22554 1 parport_pc
evdev 5609 16
video 14605 1 i915
output 1204 1 video
tpm_tis 5572 0
tpm 8137 1 tpm_tis
tpm_bios 3569 1 tpm
ext3 94196 6
jbd 32169 1 ext3
mbcache 3762 1 ext3
dm_mod 46090 18
sg 15968 0
usbhid 28028 0
hid 50629 1 usbhid
sr_mod 10770 0
sd_mod 25869 3
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2019 0
thermal 9206 0
ata_piix 17696 2
uhci_hcd 16141 0
thermal_sys 9378 3 processor,video,thermal
ehci_hcd 28175 0
e1000e 98101 0
libata 115973 2 ata_generic,ata_piix
scsi_mod 101405 4 sg,sr_mod,sd_mod,libata
usbcore 98742 10
rndis_wlan,rndis_host,cdc_ether,usbnet,cdc_phonet,cdc_acm,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e10] (rev 03)
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f220 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e13] (rev 03)
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset
HECI Controller [8086:2e14] (rev 03)
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0526900 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER
Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at f210 [size=8]
Region 1: I/O ports at f200 [size=4]
Region 2: I/O ports at f1f0 [size=8]
Region 3: I/O ports at f1e0 [size=4]
Region 4: I/O ports at f1d0 [size=16]
Capabilities: <access denied>
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT
Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at f1c0 [size=8]
Region 1: Memory at d0525000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network
Connection [8086:10de] (rev 02)
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d0524000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f0e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at f0c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at f0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0526400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD
Audio Controller [8086:3a6e] (rev 02)
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0520000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at f060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at f040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0526000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JD (ICH10D) LPC Interface
Controller [8086:3a1a] (rev 02)
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family)
4-port SATA IDE Controller [8086:3a00] (rev 02) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f1b0 [size=8]
Region 1: I/O ports at f1a0 [size=4]
Region 2: I/O ports at f190 [size=8]
Region 3: I/O ports at f180 [size=4]
Region 4: I/O ports at f170 [size=16]
Region 5: I/O ports at f160 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus
Controller [8086:3a60] (rev 02)
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0526800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family)
2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:0026]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f150 [size=8]
Region 1: I/O ports at f140 [size=4]
Region 2: I/O ports at f130 [size=8]
Region 3: I/O ports at f120 [size=4]
Region 4: I/O ports at f110 [size=16]
Region 5: I/O ports at f100 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 04b3:310c IBM Corp. Wheel Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.97 tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686-bigmem recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686-bigmem suggests:
ii grub-legacy [grub] 0.97-61 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686-bigmem is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686-bigmem/postinst/missing-firmware-2.6.32-5-686-bigmem:
linux-image-2.6.32-5-686-bigmem/postinst/depmod-error-initrd-2.6.32-5-686-bigmem:
false
linux-image-2.6.32-5-686-bigmem/prerm/would-invalidate-boot-loader-2.6.32-5-686-bigmem:
true
linux-image-2.6.32-5-686-bigmem/postinst/bootloader-error-2.6.32-5-686-bigmem:
linux-image-2.6.32-5-686-bigmem/postinst/bootloader-test-error-2.6.32-5-686-bigmem:
linux-image-2.6.32-5-686-bigmem/prerm/removing-running-kernel-2.6.32-5-686-bigmem:
true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20100701123000.26644.27066.report...@scicity.imsc.res.in
