Your message dated Sun, 30 May 2010 14:41:40 +0200 with message-id <20100530124140.gd2...@galadriel.inutil.org> and subject line Re: linux-image-2.6.32-4-xen-amd64: doesn't boot with > 4 GiB; resets immediatelly, no log messages has caused the Debian Bug report #576877, regarding linux-image-2.6.32-4-xen-amd64: doesn't boot with > 4 GiB; resets immediatelly, no log messages to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 576877: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576877 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-2.6 Version: 2.6.32-11 Severity: important Hello! To get the 2.6.32-11 kernel to boot, I need to supply mem=4G. This was not necessary with the 2.6.32-10 kernel. 2.6.32-10: (XEN) Xen version 3.4 (Debian 3.4.3~rc3-1) (wa...@debian.org) (gcc version 4.4.3 (Debian 4.4.3-2) ) Mon Mar 1 21:16:18 UTC 2010 (XEN) Command line: (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e000 (usable) (XEN) 000000000009e000 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000ddee0000 (usable) (XEN) 00000000ddee0000 - 00000000ddeef000 (ACPI data) (XEN) 00000000ddeef000 - 00000000ddf00000 (ACPI NVS) (XEN) 00000000ddf00000 - 00000000e0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000120000000 (usable) (XEN) System RAM: 4062MB (4159992kB) 2.6.32-11: resets the machine immediatelly, no log messages visible (don't have serial console set-up). 2.6.32-11, with mem=4G: (XEN) Xen version 3.4 (Debian 3.4.3~rc3-1) (wa...@debian.org) (gcc version 4.4.3 (Debian 4.4.3-2) ) Mon Mar 1 21:16:18 UTC 2010 (XEN) Command line: mem=4G (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Truncating RAM from 4718592kB to 4194304kB (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e000 (usable) (XEN) 000000000009e000 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000ddee0000 (usable) (XEN) 00000000ddee0000 - 00000000ddeef000 (ACPI data) (XEN) 00000000ddeef000 - 00000000ddf00000 (ACPI NVS) (XEN) 00000000ddf00000 - 00000000e0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) System RAM: 3550MB (3635704kB) /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 47 model name : AMD Sempron(tm) Processor 3000+ stepping : 2 cpu MHz : 1800.085 cache size : 128 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr pae cx8 apic mtrr cmov clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up rep_good pni hypervisor lahf_lm bogomips : 3600.17 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc -- Package-specific info: ** Version: Linux version 2.6.32-4-xen-amd64 (Debian 2.6.32-11) (m...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Mon Apr 5 23:19:15 UTC 2010 ** Command line: root=/dev/mapper/vg0-boole--root ro console=tty0 ** Tainted: W (512) * Taint on warning. ** Kernel log: [ 3.594644] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.595448] usbcore: registered new interface driver hiddev [ 3.599715] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.599855] sd 2:0:0:0: [sda] Write Protect is off [ 3.599893] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.599938] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.600295] sda: [ 3.603437] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-3/2-3:1.0/input/input4 [ 3.603627] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-3/input0 [ 3.603717] usbcore: registered new interface driver usbhid [ 3.603755] usbhid: v2.6:USB HID core driver [ 3.613586] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.614071] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.625464] sda1 [ 3.626452] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.544048] floppy0: no floppy controllers found [ 5.611207] device-mapper: uevent: version 1.0.3 [ 5.612270] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 5.876201] PM: Starting manual resume from disk [ 5.876242] PM: Resume from partition 254:1 [ 5.876244] PM: Checking hibernation image. [ 5.876535] PM: Error -22 checking image file [ 5.876538] PM: Resume from disk failed. [ 5.929409] kjournald starting. Commit interval 5 seconds [ 5.929471] EXT3-fs: mounted filesystem with ordered data mode. [ 7.388166] udev: starting version 151 [ 7.941584] processor LNXCPU:00: registered as cooling_device0 [ 8.258516] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 8.273361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.552543] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.568814] EDAC MC: Ver: 2.1.0 Apr 5 2010 [ 8.582764] parport_pc 00:08: reported by Plug and Play ACPI [ 8.582899] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 8.675567] EDAC amd64_edac: Ver: 3.2.0 Apr 5 2010 [ 8.675964] EDAC amd64: ECC is enabled by BIOS. [ 8.676454] EDAC MC: Rev E or earlier detected [ 8.677722] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 8.678852] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 8.839689] Error: Driver 'pcspkr' is already registered, aborting... [ 8.989920] xen: registering gsi 18 triggering 0 polarity 1 [ 8.989933] alloc irq_desc for 18 on node 0 [ 8.989937] alloc kstat_irqs on node 0 [ 8.989947] xen: --> irq=18 [ 8.989958] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.312097] intel8x0_measure_ac97_clock: measured 53952 usecs (2596 samples) [ 9.312140] intel8x0: clocking to 48000 [ 11.580049] floppy0: no floppy controllers found [ 12.959737] EXT3 FS on dm-0, internal journal [ 13.297799] Adding 974840k swap on /dev/mapper/vg0-boole--swap. Priority:-1 extents:1 across:974840k [ 13.506263] kjournald starting. Commit interval 5 seconds [ 13.506564] EXT3 FS on dm-2, internal journal [ 13.506633] EXT3-fs: mounted filesystem with ordered data mode. [ 13.984105] loop: module loaded [ 14.288494] Bridge firewalling registered [ 14.333916] device eth0 entered promiscuous mode [ 14.337838] r8169: eth0: link up [ 14.345691] br0: port 1(eth0) entering learning state [ 24.588013] br0: no IPv6 routers present [ 24.992008] eth0: no IPv6 routers present [ 29.344014] br0: port 1(eth0) entering forwarding state [ 44.728065] RPC: Registered udp transport module. [ 44.728112] RPC: Registered tcp transport module. [ 44.728147] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 44.810238] Slow work thread pool: Starting up [ 44.810370] Slow work thread pool: Ready [ 44.810504] FS-Cache: Loaded [ 44.862639] FS-Cache: Netfs 'nfs' registered for caching [ 44.896796] svc: failed to register lockdv1 RPC service (errno 97). [ 45.430933] fuse init (API version 7.13) [ 46.057971] Event-channel device installed. [ 46.255770] alloc irq_desc for 502 on node 0 [ 46.255776] alloc kstat_irqs on node 0 [ 46.255853] xenbus_probe wake_waiting [ 46.255920] xenbus_probe wake_waiting [ 46.255975] alloc irq_desc for 501 on node 0 [ 46.255979] alloc kstat_irqs on node 0 [ 46.257009] XENBUS: Unable to read cpu state [ 46.257711] xenbus_probe_devices backend [ 46.258085] xenbus_probe_devices failed xenbus_directory [ 46.258128] backend_probe_and_watch devices probed ok [ 46.258386] backend_probe_and_watch watch add ok ok [ 46.258425] backend_probe_and_watch all done [ 46.258460] xenbus_probe_devices device [ 46.258667] xenbus_probe_devices failed xenbus_directory [ 46.258705] frontend_probe_and_watch devices probed ok [ 46.258883] frontend_probe_and_watch watch add ok ok [ 46.258920] frontend_probe_and_watch all done [ 54.348904] Bluetooth: Core ver 2.15 [ 54.349059] NET: Registered protocol family 31 [ 54.349096] Bluetooth: HCI device and connection manager initialized [ 54.349134] Bluetooth: HCI socket layer initialized [ 54.465496] Bluetooth: L2CAP ver 2.14 [ 54.465541] Bluetooth: L2CAP socket layer initialized [ 54.495468] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 54.495515] Bluetooth: BNEP filters: protocol multicast [ 54.498713] Bluetooth: RFCOMM TTY layer initialized [ 54.498765] Bluetooth: RFCOMM socket layer initialized [ 54.498802] Bluetooth: RFCOMM ver 1.11 [ 54.532711] Bluetooth: SCO (Voice Link) ver 0.6 [ 54.532757] Bluetooth: SCO socket layer initialized ** Model information sys_vendor: FUJITSU SIEMENS product_name: D2264-A1 product_version: chassis_vendor: FUJITSU SIEMENS chassis_version: bios_vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd. bios_version: 5.00 R1.07-01.2264.A1 board_vendor: FUJITSU SIEMENS board_name: D2264-A1 board_version: S26361-D2264-A1 ** Loaded modules: Module Size Used by sco 7209 2 bnep 9411 2 rfcomm 29565 0 l2cap 24704 4 bnep,rfcomm crc16 1319 1 l2cap bluetooth 41795 6 sco,bnep,rfcomm,l2cap rfkill 13012 2 bluetooth xen_evtchn 4259 1 xenfs 9472 1 fuse 50126 1 nfs 240554 1 lockd 57539 1 nfs fscache 29818 1 nfs nfs_acl 2031 1 nfs auth_rpcgss 33460 1 nfs sunrpc 161159 11 nfs,lockd,nfs_acl,auth_rpcgss bridge 39598 0 stp 1440 1 bridge loop 11783 0 snd_intel8x0 24122 0 snd_ac97_codec 99186 1 snd_intel8x0 ac97_bus 1086 1 snd_ac97_codec amd64_edac_mod 13630 0 snd_pcm 60503 2 snd_intel8x0,snd_ac97_codec parport_pc 18855 0 psmouse 49521 0 parport 27938 1 parport_pc snd_timer 15502 1 snd_pcm edac_core 29245 3 amd64_edac_mod shpchp 26264 0 edac_mce_amd 6369 1 amd64_edac_mod pcspkr 1699 0 serio_raw 3752 0 k8temp 3139 0 pci_hotplug 21171 1 shpchp snd 46350 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 4598 1 snd snd_page_alloc 6217 2 snd_intel8x0,snd_pcm evdev 7336 11 container 2389 0 processor 30247 0 ext3 106502 2 jbd 37053 1 ext3 mbcache 4970 1 ext3 dm_mod 53674 18 sg 18744 0 sd_mod 29689 2 crc_t10dif 1276 1 sd_mod usbhid 33244 0 sr_mod 12602 0 hid 62793 1 usbhid cdrom 29399 1 sr_mod sata_sis 3730 1 ata_generic 2983 0 ohci_hcd 19212 0 pata_sis 9623 1 sata_sis ehci_hcd 30802 0 r8169 28877 0 mii 3210 1 r8169 libata 132183 3 sata_sis,ata_generic,pata_sis button 4634 0 usbcore 121815 4 usbhid,ohci_hcd,ehci_hcd nls_base 6377 1 usbcore scsi_mod 121925 4 sg,sd_mod,sr_mod,libata thermal 11674 0 fan 3346 0 thermal_sys 11878 3 processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 761/M761 Host [1039:0761] (rev 01) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1099] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=32M] Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202 [1039:0002] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 00002000-00002fff Memory behind bridge: fa100000-fa1fffff Prefetchable memory behind bridge: f0000000-f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] [1039:0965] (rev 48) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01) (prog-if 80 [Master]) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Interrupt: pin ? routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1c80 [size=16] Capabilities: <access denied> Kernel driver in use: pata_sis 00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0) Subsystem: Fujitsu Technology Solutions Device [1734:109c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 173 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at 1400 [size=256] Region 1: I/O ports at 1000 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at fa001000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin C routed to IRQ 22 Region 0: Memory at fa002000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI]) Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1095] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin D routed to IRQ 23 Region 0: Memory at fa003000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] 182 SATA/RAID Controller [1039:0182] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1095] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 1cb0 [size=8] Region 1: I/O ports at 1ca4 [size=4] Region 2: I/O ports at 1ca8 [size=8] Region 3: I/O ports at 1ca0 [size=4] Region 4: I/O ports at 1c90 [size=16] Region 5: I/O ports at 1c00 [size=128] Capabilities: <access denied> Kernel driver in use: sata_sis 00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1091] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at fa004000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: r8169 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: amd64_edac 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp 00:1f.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:0004] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter [1039:6330] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1099] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 BIST result: 00 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at fa100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-4-xen-amd64 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-4-xen-amd64 depends on: ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy ii initramfs-tools 0.93.4 tools for generating an initramfs ii linux-base 2.6.32-11 Linux image base package ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-4-xen-amd64 recommends: ii firmware-linux-free 2.6.32-9 Binary firmware for various driver Versions of packages linux-image-2.6.32-4-xen-amd64 suggests: pn grub <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-4-xen-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) ii xen-hypervisor-3.4-amd64 [xe 3.4.3~rc3-1 The Xen Hypervisor on AMD64 -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-4-xen-amd64/prerm/would-invalidate-boot-loader-2.6.32-4-xen-amd64: true linux-image-2.6.32-4-xen-amd64/postinst/bootloader-test-error-2.6.32-4-xen-amd64: linux-image-2.6.32-4-xen-amd64/postinst/missing-firmware-2.6.32-4-xen-amd64: linux-image-2.6.32-4-xen-amd64/postinst/depmod-error-initrd-2.6.32-4-xen-amd64: false linux-image-2.6.32-4-xen-amd64/postinst/bootloader-error-2.6.32-4-xen-amd64: linux-image-2.6.32-4-xen-amd64/prerm/removing-running-kernel-2.6.32-4-xen-amd64: true Regards, Thomas
--- End Message ---
--- Begin Message ---Version: 2.6.32-13 On Mon, May 10, 2010 at 11:54:54AM +0200, Thomas Schwinge wrote: > Hello! > > On Thu, Apr 08, 2010 at 12:52:25AM +0200, I wrote: > > 2.6.32-11: resets the machine immediatelly, no log messages visible > > (don't have serial console set-up). > > This has been fixed with commit 28c3e64a77c36a6e52a50f713e7caf268e4b9b1f > in jeremy/xen/stable-2.6.32.x. This fix is included in the current pvops patch. Cheers, Moritz
--- End Message ---
