Your message dated Sat, 1 May 2010 22:13:16 +0200 with message-id <20100501201316.ga18...@galadriel.inutil.org> and subject line Re: longer boot time without reason has caused the Debian Bug report #522156, regarding linux-image-2.6.26-2-686: Longer boot time without reason to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 522156: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=522156 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-image-2.6.26-2-686 Version: 2.6.26-15 Severity: normal After upgrading from from linux-image-2.6.26-1-686 to linux-image-2.6.26-2-686 the boot increased significantly I looked in the messages and found the two entries which are responsible for the longer boot time. First the two lines before the upgrade. BEFORE Mar 17 17:45:39 test kernel: [ 0.802323] pci 0000:00:00.0: Enabling HT MSI Mapping Mar 17 17:45:39 test kernel: [ 0.826377] pci 0000:00:06.0: Enabling HT MSI Mapping AFTER Mar 31 10:08:09 andi kernel: [ 0.805517] pci 0000:00:00.0: Enabling HT MSI Mapping Mar 31 10:08:09 andi kernel: [ 2.066597] pci 0000:00:06.0: Enabling HT MSI Mapping The question is: Why does this poing take longer now? -- Package-specific info: ** Version: Linux version 2.6.26-2-686 (Debian 2.6.26-15) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 01:08:11 UTC 2009 ** Command line: root=/dev/md1 vga=0x31a ro ** Tainted: P (1) ** Kernel log: [ 8.509866] raid0 : nb_zone is 1. [ 8.513569] raid0 : Allocating 4 bytes for hash. [ 8.522418] md: md3 stopped. [ 8.549767] md: bind<sdb5> [ 8.562681] md: bind<sda5> [ 8.579295] md3: setting max_sectors to 128, segment boundary to 32767 [ 8.582906] raid0: looking at sda5 [ 8.586438] raid0: comparing sda5(2835328) with sda5(2835328) [ 8.588316] raid0: END [ 8.592317] raid0: ==> UNIQUE [ 8.595828] raid0: 1 zones [ 8.599281] raid0: looking at sdb5 [ 8.602691] raid0: comparing sdb5(2835328) with sda5(2835328) [ 8.606061] raid0: EQUAL [ 8.609421] raid0: FINAL 1 zones [ 8.611986] raid0: done. [ 8.615987] raid0 : md_size is 5670656 blocks. [ 8.619211] raid0 : conf->hash_spacing is 5670656 blocks. [ 8.622438] raid0 : nb_zone is 1. [ 8.625650] raid0 : Allocating 4 bytes for hash. [ 8.636210] md: md4 stopped. [ 8.744194] md: bind<sdb6> [ 8.747922] md: bind<sda6> [ 8.765258] raid1: raid set md4 active with 2 out of 2 mirrors [ 8.773962] md: md5 stopped. [ 8.852062] md: bind<sdb7> [ 8.855187] md: bind<sda7> [ 8.875744] raid1: raid set md5 active with 2 out of 2 mirrors [ 8.996848] PM: Starting manual resume from disk [ 9.040852] kjournald starting. Commit interval 5 seconds [ 9.041123] EXT3-fs: mounted filesystem with ordered data mode. [ 10.291112] udevd version 125 started [ 10.839768] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 10.842989] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 10.976824] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 10.980069] ACPI: PCI Interrupt 0000:00:07.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 10.983520] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 11.024376] input: Power Button (FF) as /class/input/input2 [ 11.062665] ACPI: Power Button (FF) [PWRF] [ 11.065166] input: Power Button (CM) as /class/input/input3 [ 11.127619] ACPI: Power Button (CM) [PWRB] [ 11.425384] input: PC Speaker as /class/input/input4 [ 11.878685] input: PS2++ Logitech MX Mouse as /class/input/input5 [ 12.065497] Adding 5670648k swap on /dev/md3. Priority:-1 extents:1 across:5670648k [ 12.498499] EXT3 FS on md1, internal journal [ 12.729913] loop: module loaded [ 14.476280] fuse init (API version 7.9) [ 14.614630] kjournald starting. Commit interval 5 seconds [ 14.653591] EXT3 FS on md0, internal journal [ 14.657781] EXT3-fs: mounted filesystem with ordered data mode. [ 14.693990] kjournald starting. Commit interval 5 seconds [ 14.693990] EXT3 FS on md2, internal journal [ 14.693990] EXT3-fs: mounted filesystem with ordered data mode. [ 14.745063] kjournald starting. Commit interval 5 seconds [ 14.801215] EXT3 FS on md4, internal journal [ 14.805048] EXT3-fs: mounted filesystem with ordered data mode. [ 14.865530] kjournald starting. Commit interval 5 seconds [ 14.930688] EXT3 FS on md5, internal journal [ 14.935091] EXT3-fs: mounted filesystem with ordered data mode. [ 18.813437] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) [ 18.813437] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 [ 18.813437] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa [ 18.813437] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc [ 18.813437] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 [ 19.861774] NET: Registered protocol family 10 [ 19.869161] lo: Disabled Privacy Extensions [ 20.651673] lp: driver loaded but no devices found [ 20.724557] ppdev: user-space parallel port driver [ 21.942858] Clocksource tsc unstable (delta = -272872673 ns) [ 24.456492] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 24.456498] vboxdrv: Successfully done. [ 24.456500] vboxdrv: Found 2 processor cores. [ 24.456531] vboxdrv: fAsync=1 offMin=0xdbf59 offMax=0xdbf59 [ 24.466342] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 24.474874] vboxdrv: Successfully loaded version 2.1.4 (interface 0x000a0009). [ 24.936746] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 30.571909] Linux agpgart interface v0.103 [ 31.170510] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 31.218610] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes. [ 31.218719] [fglrx] vendor: 1002 device: 7249 count: 1 [ 31.219149] [fglrx] ioport: bar 4, base 0xb000, size: 0x100 [ 31.219451] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 31.219456] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16 [ 31.219461] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 31.222336] [fglrx] Driver built-in PAT support is enabled successfully [ 31.222364] [fglrx] module loaded - fglrx 8.56.4 [Dec 1 2008] with 1 minors [ 34.383700] [fglrx:drm_parse_option] *ERROR* "locked-userpages" is not a valid option [ 34.383709] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes. [ 34.383758] [fglrx] Gart USWC size:192 M. [ 34.383761] [fglrx] Gart cacheable size:60 M. [ 34.383768] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 34.383773] [fglrx] Reserved FB block: Unshared offset:7ffb000, size:5000 [ 34.383777] [fglrx] Reserved FB block: Unshared offset:ffbb000, size:45000 [ 34.383782] [fglrx] Reserved FB block: Unshared offset:1ffff000, size:1000 [ 45.967815] eth0: no IPv6 routers present [ 1400.882649] tun: Universal TUN/TAP device driver, 1.6 [ 1400.882649] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 1400.887011] tun0: Disabled Privacy Extensions [ 3253.919365] tun0: Disabled Privacy Extensions [ 3696.331253] tun0: Disabled Privacy Extensions ** Loaded modules: Module Size Used by tun 8292 1 fglrx 1939228 27 agpgart 28776 1 fglrx vboxnetflt 69224 0 vboxdrv 91752 1 vboxnetflt ppdev 6500 0 parport_pc 22500 0 lp 8164 0 parport 30988 3 ppdev,parport_pc,lp ipv6 235364 28 powernow_k8 12036 1 cpufreq_conservative 5960 0 cpufreq_userspace 3172 0 cpufreq_stats 3776 0 cpufreq_powersave 1856 0 cpufreq_ondemand 6476 1 freq_table 4224 3 powernow_k8,cpufreq_stats,cpufreq_ondemand fuse 42908 1 loop 12748 0 psmouse 32336 0 serio_raw 4740 0 k8temp 4064 0 pcspkr 2432 0 button 6096 0 snd_hda_intel 325688 1 snd_pcm 62596 1 snd_hda_intel snd_seq 41456 0 snd_timer 17800 2 snd_pcm,snd_seq snd_seq_device 6380 1 snd_seq snd 45604 7 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 6368 1 snd snd_page_alloc 7816 2 snd_hda_intel,snd_pcm i2c_nforce2 5536 0 i2c_core 19828 1 i2c_nforce2 evdev 8000 4 ext3 105512 5 jbd 39444 1 ext3 mbcache 7108 1 ext3 raid1 18016 4 raid0 6368 2 md_mod 67036 8 raid1,raid0 sg 26964 0 sr_mod 13316 0 cdrom 30176 1 sr_mod sd_mod 22200 14 amd74xx 7720 0 [permanent] usbhid 35904 0 hid 33184 1 usbhid ff_memless 4392 1 usbhid ide_pci_generic 3908 0 [permanent] ide_core 96136 2 amd74xx,ide_pci_generic ahci 23596 12 floppy 47748 0 ata_generic 4676 0 libata 140416 2 ahci,ata_generic scsi_mod 129324 4 sg,sr_mod,sd_mod,libata dock 8304 1 libata forcedeth 45072 0 ehci_hcd 28396 0 ohci_hcd 18500 0 usbcore 118224 4 usbhid,ehci_hcd,ohci_hcd thermal 15228 0 processor 32544 2 powernow_k8,thermal fan 4164 0 thermal_sys 10856 3 thermal,processor,fan ** PCI devices: 00:00.0 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller [10de:0444] (rev a3) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge [0601]: nVidia Corporation MCP65 LPC Bridge [10de:0441] (rev a3) Subsystem: Giga-byte Technology Device [1458:0c11] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation MCP65 SMBus [10de:0446] (rev a1) Subsystem: Giga-byte Technology Device [1458:0c11] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at e000 [size=64] Region 4: I/O ports at 1c00 [size=64] Region 5: I/O ports at 1c40 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller [10de:0445] (rev a1) Subsystem: Giga-byte Technology Device [1458:0c11] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller [10de:0454] (rev a3) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at f4008000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:02.1 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller [10de:0455] (rev a3) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at f4006000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:06.0 Ethernet controller [0200]: nVidia Corporation MCP65 Ethernet [10de:0450] (rev a3) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 221 Region 0: Memory at f4007000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c800 [size=8] Capabilities: <access denied> Kernel driver in use: forcedeth Kernel modules: forcedeth 00:07.0 Audio device [0403]: nVidia Corporation MCP65 High Definition Audio [10de:044a] (rev a1) Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 23 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI bridge [10de:0449] (rev a1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000a000-0000afff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:09.0 IDE interface [0101]: nVidia Corporation MCP65 IDE [10de:0448] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at f000 [size=16] Capabilities: <access denied> Kernel driver in use: AMD_IDE Kernel modules: amd74xx 00:0a.0 IDE interface [0101]: nVidia Corporation MCP65 SATA Controller [10de:045d] (rev a3) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 222 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at dc00 [size=16] Region 5: Memory at f4004000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:0458] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: f2000000-f3ffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 02:00.0 VGA compatible controller [0300]: ATI Technologies Inc R580 [Radeon X1900 XT] (Primary) [1002:7249] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device [1002:0b12] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at f3000000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at b000 [size=256] [virtual] Expansion ROM at f2000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: fglrx_pci Kernel modules: fglrx 02:00.1 Display controller [0380]: ATI Technologies Inc R580 [Radeon X1900 XT] (Secondary) [1002:7269] Subsystem: ATI Technologies Inc Device [1002:0b13] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Region 0: Memory at f3010000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> -- System Information: Debian Release: 5.0 APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-2-686 recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-2-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information excluded
--- End Message ---
--- Begin Message ---On Mon, Feb 01, 2010 at 02:34:01PM +0100, maximilian attems wrote: > tags 522156 moreinfo > stop > > can you still reproduce with latest pushed out stable update? > 2.6.26-21 > > also a search on which patch caused the problem if it is still > reproducible might be the best. No further feedback, closing the bug. If this can be reproduced with current kernels, please reopen this bug. Cheers, Moritz
--- End Message ---
