--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-5
Severity: normal
The eeepc_laptop module provides a sysfs file at
/sys/devices/platform/eeepc/wlan
to turn power on and off to the WiFi card. Turning off the card
(modprobe -r rt2860sta && echo 0 > wlan) works as expected and
saves a significant amount of power on the Eeepc 901.
However, the PCI device is not unconfigured even though the device is no
longer accessible on the bus:
01:00.0 Network controller: RaLink Device 0781 (rev ff)
Re-enabling the card (echo 1 > wlan) does not correctly re-initialize
the card. Attempting to insert the card's driver (modprobe rt2860sta)
results in the following errors:
[20247.746819]
[20247.746819]
[20247.746819] === pAd = f8b41000, size = 580788 ===
[20247.746819]
[20247.746819] <-- RTMPAllocAdapterBlock, Status=0
[20247.746819] PCI: Setting latency timer of device 0000:01:00.0 to 64
[20247.794646] RX DESC f46b9000 size = 2048
[20247.795319] <-- RTMPAllocTxRxRingMemory, Status=0
[20247.989227] ERROR!!! BBP read R0=0xffffffff fail
[20247.989227] ERROR!!! BBP read R0=0xffffffff fail
[...]
[20248.198021] ERROR!!! NICInitializeAdapter failed, Status[=0x00000001]
[20248.198022] ERROR!!! H2M_MAILBOX still hold by MCU. command fail
[20248.206020] !!! RT2860 Initialized fail !!!
[20311.186092] ERROR!!! BBP write R62=0xffffffff fail
The system must be rebooted to make the card work again.
Since powering on/off the card is apparently handled by the
eeepc_laptop module, it should probably deal with the PCI
de/reconfigure.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-5) (wa...@debian.org) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 16:46:13 UTC
2008
** Command line:
root=/dev/sda1 ro quiet
** Not tainted
** Kernel log:
[ 8.841632] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.885632] eeepc: Hotkey init flags 0x41
[ 8.889547] eeepc: Get control methods supported: 0x101713
[ 8.889639] ACPI: AC Adapter [AC0] (off-line)
[ 8.889639] input: Lid Switch as /class/input/input2
[ 8.905632] input: PC Speaker as /class/input/input3
[ 8.918610] ACPI: Lid Switch [LID]
[ 8.919477] input: Sleep Button (CM) as /class/input/input4
[ 8.983808] ACPI: Sleep Button (CM) [SLPB]
[ 8.984055] input: Power Button (CM) as /class/input/input5
[ 9.015262] ACPI: Power Button (CM) [PWRB]
[ 9.189265] ACPI: Battery Slot [BAT0] (battery present)
[ 9.191914] input: Video Bus as /class/input/input6
[ 9.247044] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.349134] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) ->
IRQ 19
[ 9.974270] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.256102] Bluetooth: Core ver 2.11
[ 10.256102] NET: Registered protocol family 31
[ 10.256102] Bluetooth: HCI device and connection manager initialized
[ 10.256102] Bluetooth: HCI socket layer initialized
[ 10.277849] Bluetooth: HCI USB driver ver 2.9
[ 10.286610] usbcore: registered new interface driver hci_usb
[ 11.203393] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 11.203393] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 11.235478] hda_codec: Unknown model for ALC269, trying auto-probe from
BIOS...
[ 12.570463] input: ImPS/2 Logitech Wheel Mouse as /class/input/input7
[ 13.075388] Adding 514040k swap on /dev/sda5. Priority:-1 extents:1
across:514040k
[ 13.120180] EXT3 FS on sda1, internal journal
[ 13.601969] fuse init (API version 7.9)
[ 13.642490] kjournald starting. Commit interval 5 seconds
[ 13.642613] EXT3 FS on sdb1, internal journal
[ 13.642613] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.067306] NET: Registered protocol family 10
[ 16.067306] lo: Disabled Privacy Extensions
[ 16.067306] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.772090] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 20.772090] vboxdrv: Successfully done.
[ 20.772090] vboxdrv: Found 2 processor cores.
[ 20.772090] vboxdrv: fAsync=0 offMin=0x3c0 offMax=0x7608
[ 20.772090] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 20.772090] vboxdrv: Successfully loaded version 2.0.2 (interface
0x00090000).
[ 21.379543] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 22.901615] Bluetooth: L2CAP ver 2.9
[ 22.901615] Bluetooth: L2CAP socket layer initialized
[ 23.089596] Bluetooth: RFCOMM socket layer initialized
[ 23.089596] Bluetooth: RFCOMM TTY layer initialized
[ 23.089596] Bluetooth: RFCOMM ver 1.8
[ 23.255019] RX DESC f6fdd000 size = 2048
[ 23.255019] <-- RTMPAllocTxRxRingMemory, Status=0
[ 23.263772] I/F(ra0) Key1Str is Invalid key length! KeyLen = 0!
[ 23.263875] I/F(ra0) Key2Str is Invalid key length! KeyLen = 0!
[ 23.265364] I/F(ra0) Key3Str is Invalid key length! KeyLen = 0!
[ 23.265364] I/F(ra0) Key4Str is Invalid key length! KeyLen = 0!
[ 23.265364] 1. Phy Mode = 9
[ 23.265364] 2. Phy Mode = 9
[ 23.285901] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 23.293901] 3. Phy Mode = 9
[ 23.293901] MCS Set = ff ff 00 00 01
[ 23.317902] <==== RTMPInitialize, Status=0
[ 23.317902] 0x1300 = 00064300
[ 26.264074] [drm] Initialized drm 1.1.0 20060810
[ 26.272080] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 26.272080] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 26.272080] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 34.008177] ===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1179
[ 64.132511] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 94.251040] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1015
[ 124.338466] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 163.792151] RX DESC f53b3000 size = 2048
[ 163.793278] <-- RTMPAllocTxRxRingMemory, Status=0
[ 163.797897] I/F(ra0) Key1Str is Invalid key length! KeyLen = 0!
[ 163.797897] I/F(ra0) Key2Str is Invalid key length! KeyLen = 0!
[ 163.797897] I/F(ra0) Key3Str is Invalid key length! KeyLen = 0!
[ 163.797922] I/F(ra0) Key4Str is Invalid key length! KeyLen = 0!
[ 163.799081] 1. Phy Mode = 9
[ 163.799094] 2. Phy Mode = 9
[ 163.821893] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 163.828980] 3. Phy Mode = 9
[ 163.830066] MCS Set = ff ff 00 00 01
[ 163.836270] <==== RTMPInitialize, Status=0
[ 163.836350] 0x1300 = 00064300
[ 174.022583] ra0: no IPv6 routers present
[ 174.156576] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 174.158835] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=2)
[ 190.384139] ra0: no IPv6 routers present
[ 194.995764] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 200.003549] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 225.067792] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 230.077511] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 255.217644] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1015
[ 260.238804] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1015
[ 285.414031] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 290.428264] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 302.891607] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 315.548252] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1015
[ 320.571374] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1015
[ 445.830588] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 450.829899] ===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1098
[ 576.115232] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1019
[ 581.119674] ===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1019
** Loaded modules:
Module Size Used by
i915 25280 2
drm 65256 3 i915
rfcomm 28272 2
l2cap 17248 5 rfcomm
vboxdrv 52536 0
ipv6 235300 16
acpi_cpufreq 6796 0
cpufreq_conservative 5960 0
cpufreq_stats 3776 0
cpufreq_ondemand 6476 2
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 3172 0
cpufreq_powersave 1856 0
fuse 42908 1
snd_hda_intel 324248 1
serio_raw 4740 0
psmouse 32336 0
hci_usb 12252 2
bluetooth 44900 7 rfcomm,l2cap,hci_usb
snd_seq_dummy 2660 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62628 2 snd_hda_intel,snd_pcm_oss
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
video 16400 0
output 2912 1 video
pcspkr 2432 0
iTCO_wdt 9508 0
battery 10180 0
rng_core 3940 0
ac 4196 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
rt2860sta 435960 1
snd_rawmidi 18560 1 snd_seq_midi
button 6064 0
eeepc_laptop 7440 0
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
intel_agp 22300 1
agpgart 28776 3 drm,intel_agp
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 11
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
atl1e 27636 0
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
evdev 8000 6
ext3 105256 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 5
ide_pci_generic 3908 0 [permanent]
ide_core 92628 1 ide_pci_generic
ata_piix 14180 3
ata_generic 4676 0
libata 140416 2 ata_piix,ata_generic
scsi_mod 129356 2 sd_mod,libata
dock 8272 1 libata
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 4 hci_usb,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 4 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory
Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME
Express Integrated Graphics Controller [8086:27ae] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc80 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:831a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 02)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 [8086:27d4] (rev 02)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 [8086:27d6] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt, intel-rng
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 Network controller [0280]: RaLink Device [1814:0781]
Subsystem: RaLink Device [1814:2790]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2860
Kernel modules: rt2860sta
04:00.0 Ethernet controller [0200]: Attansic Technology Corp. Device
[1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 219
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec80 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
Kernel modules: atl1e
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information excluded
--- End Message ---
