Package: linux-2.6
Version: 2.6.33-1~experimental.2, 2.6.33-1~experimental.4
Severity: normal
Tags: experimental
user: debian-eeepc-de...@lists.alioth.debian.org
usertag: features
usertag: 901
Hi,
The 2.6.33 linux-image in experimental removed the rt2860sta driver
from staging and it seems to offer the rt2800 driver as a replacement.
The later doesn't work for me, however. I can't associate with my
access point using WPA2.
Hardware is Asus EeePC 901 (details in the info below).
Would it be possible to restore rt2860sta?
-- Package-specific info:
** Version:
Linux version 2.6.33-2-686 (Debian 2.6.33-1~experimental.4) (m...@debian.org)
(gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Mar 18 07:30:30 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.33-2-686 root=UUID=4e436c23-73dc-44f1-85be-ffc868c92769
ro quiet i915.modeset=1 acpi_osi=Linux rfkill.default_state=1
** Not tainted
** Kernel log:
[ 3.497662] usb usb4: Product: UHCI Host Controller
[ 3.497666] usb usb4: Manufacturer: Linux 2.6.33-2-686 uhci_hcd
[ 3.497671] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.504715] hub 4-0:1.0: USB hub found
[ 3.504729] hub 4-0:1.0: 2 ports detected
[ 3.504849] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.504866] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.504873] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.504893] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 3.504951] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00
[ 3.505035] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.505042] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.505047] usb usb5: Product: UHCI Host Controller
[ 3.505052] usb usb5: Manufacturer: Linux 2.6.33-2-686 uhci_hcd
[ 3.505057] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.509041] hub 5-0:1.0: USB hub found
[ 3.509054] hub 5-0:1.0: 2 ports detected
[ 3.533294] eeepc_laptop: Eee PC Hotkey Driver
[ 3.533313] eeepc_laptop: Hotkey init flags 0x41
[ 3.672083] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 3.820149] [drm] Initialized drm 1.1.0 20060810
[ 3.949161] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.949171] i915 0000:00:02.0: setting latency timer to 64
[ 3.993935] [drm] set up 7M of stolen space
[ 4.124233] rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 4.124247] rt2800pci 0000:01:00.0: setting latency timer to 64
[ 4.226869] phy0: Selected rate control algorithm 'minstrel'
[ 4.228381] Registered led device: rt2800pci-phy0::radio
[ 4.228478] Registered led device: rt2800pci-phy0::assoc
[ 4.228574] Registered led device: rt2800pci-phy0::quality
[ 4.233376] usb 1-8: New USB device found, idVendor=05e3, idProduct=0505
[ 4.233384] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.233390] usb 1-8: Product: USB 2.0 Camera
[ 4.264156] elantech.c: assuming hardware version 2, firmware version 2.48
[ 4.367916] elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 4.372520] [drm] initialized overlay support
[ 4.641088] Linux video capture interface: v2.00
[ 4.660808] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05e3:0505)
[ 4.829636] [drm:edid_is_valid] *ERROR* EDID checksum is invalid, remainder
is 219
[ 4.829705] [drm:edid_is_valid] *ERROR* Raw EDID:
[ 4.829765] <3>00 ff ff ff ff ff ff 00 06 af 20 10 00 00 00 00 ..........
.....
[ 4.829771] <3>01 12 01 03 80 13 0b 78 0a fa 56 92 56 54 98 24
.......x..V.VT.$
[ 4.829777] <3>1a 4f 54 00 00 00 01 01 01 01 01 01 01 01 01 01
.OT.............
[ 4.829783] <3>01 01 01 01 01 01 b0 13 00 40 41 58 19 20 18 88
.........@ax. ..
[ 4.829788] <3>03 01 c3 71 00 00 00 18 00 00 00 0f 00 00 00 00
...q............
[ 4.829794] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
................
[ 4.829800] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
................
[ 4.829805] <3>00 00 00 00 00 00 00 00 00 00 00 00 df ff ff ff
................
[ 4.829809]
[ 4.871139] usbcore: registered new interface driver uvcvideo
[ 4.871144] USB Video Class driver (v0.1.0)
[ 5.095273] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input6
[ 5.132682] Console: switching to colour frame buffer device 128x37
[ 5.141324] fb0: inteldrmfb frame buffer device
[ 5.141327] registered panic notifier
[ 5.141354] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.141428] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.141508] HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[ 5.141553] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.233883] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 5.966532] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling
anyway
[ 5.971938] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS,
enabling anyway
[ 5.971947] eeepc_laptop: Get control methods supported: 0x6101713
[ 5.981318] input: Asus EeePC extra buttons as
/devices/platform/eeepc/input/input8
[ 7.742025] device-mapper: uevent: version 1.0.3
[ 7.743137] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised:
dm-de...@redhat.com
[ 17.142261] padlock: VIA PadLock not detected.
[ 17.173741] padlock: VIA PadLock Hash Engine not detected.
[ 17.425085] loop: module loaded
[ 18.203149] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 18.273236] EXT4-fs (dm-0): barriers disabled
[ 18.303342] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 19.290108] ATL1E 0000:04:00.0: irq 29 for MSI/MSI-X
[ 19.294343] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.421571] Bluetooth: Core ver 2.15
[ 25.421673] NET: Registered protocol family 31
[ 25.421678] Bluetooth: HCI device and connection manager initialized
[ 25.421683] Bluetooth: HCI socket layer initialized
[ 25.443300] Bluetooth: L2CAP ver 2.14
[ 25.443306] Bluetooth: L2CAP socket layer initialized
[ 25.463689] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.463696] Bluetooth: BNEP filters: protocol multicast
[ 25.485311] Bluetooth: RFCOMM TTY layer initialized
[ 25.485321] Bluetooth: RFCOMM socket layer initialized
[ 25.485326] Bluetooth: RFCOMM ver 1.11
[ 25.514791] Bridge firewalling registered
[ 25.571343] Bluetooth: SCO (Voice Link) ver 0.6
[ 25.571350] Bluetooth: SCO socket layer initialized
[ 26.765504] rt2800pci 0000:01:00.0: firmware: requesting rt2860.bin
[ 26.839701] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.883595] lp: driver loaded but no devices found
[ 26.966748] ppdev: user-space parallel port driver
[ 58.345626] wlan0: direct probe to AP 00:a1:07:d6:9c:dd (try 1)
[ 58.545049] wlan0: direct probe to AP 00:a1:07:d6:9c:dd (try 2)
[ 58.744496] wlan0: direct probe to AP 00:a1:07:d6:9c:dd (try 3)
[ 58.945048] wlan0: direct probe to AP 00:a1:07:d6:9c:dd timed out
[ 75.849471] wlan0: direct probe to AP 00:a1:07:d6:9c:dd (try 1)
[ 76.049025] wlan0: direct probe to AP 00:a1:07:d6:9c:dd (try 2)
[ 76.249030] wlan0: direct probe to AP 00:a1:07:d6:9c:dd (try 3)
[ 76.449037] wlan0: direct probe to AP 00:a1:07:d6:9c:dd timed out
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 4449 0
lp 5845 0
parport 22250 2 ppdev,lp
sco 5889 2
bridge 32977 0
stp 996 1 bridge
rfcomm 24502 6
bnep 7591 2
l2cap 22430 6 rfcomm,bnep
bluetooth 35663 6 sco,rfcomm,bnep,l2cap
cpufreq_conservative 6198 0
cpufreq_powersave 602 0
cpufreq_userspace 1492 0
cpufreq_stats 1940 0
acpi_cpufreq 5135 0
loop 9772 0
sha256_generic 10824 2
aes_i586 6816 2
aes_generic 25738 1 aes_i586
cbc 1983 1
dm_crypt 9156 1
dm_mod 47420 3 dm_crypt
snd_hda_codec_realtek 168375 1
joydev 6778 0
uvcvideo 45623 0
snd_hda_intel 16923 1
videodev 27068 1 uvcvideo
v4l1_compat 10314 2 uvcvideo,videodev
snd_hda_codec 48763 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4082 1 snd_hda_codec
snd_pcm_oss 28722 0
arc4 974 2
snd_mixer_oss 10490 1 snd_pcm_oss
ecb 1405 2
snd_pcm 47219 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3600 0
rt2800pci 7387 0
snd_rawmidi 12652 1 snd_seq_midi
rt2800lib 17417 1 rt2800pci
rt2x00usb 5725 1 rt2800lib
snd_seq_midi_event 3672 1 snd_seq_midi
i915 217679 2
rt2x00pci 3777 1 rt2800pci
crc_ccitt 1039 1 rt2800pci
drm_kms_helper 18257 1 i915
snd_seq 35421 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12349 2 snd_pcm,snd_seq
rt2x00lib 18813 4 rt2800pci,rt2800lib,rt2x00usb,rt2x00pci
drm 112447 3 i915,drm_kms_helper
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
i2c_algo_bit 3497 1 i915
mac80211 125802 3 rt2x00usb,rt2x00pci,rt2x00lib
snd 34703 13
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
eeepc_laptop 10004 0
i2c_core 12265 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
uhci_hcd 16149 0
cfg80211 90741 2 rt2x00lib,mac80211
sparse_keymap 1767 1 eeepc_laptop
rng_core 2350 0
tpm_tis 5496 0
ehci_hcd 27870 0
soundcore 3642 1 snd
psmouse 38755 0
intel_agp 20257 1
tpm 8129 1 tpm_tis
rfkill 10320 5 bluetooth,eeepc_laptop,cfg80211
usbcore 100734 5 uvcvideo,rt2x00usb,uhci_hcd,ehci_hcd
video 15053 1 i915
tpm_bios 3557 1 tpm
pci_hotplug 18127 1 eeepc_laptop
battery 3782 0
ac 1640 0
atl1e 22893 0
eeprom_93cx6 963 1 rt2800pci
button 3598 1 i915
led_class 1753 2 rt2x00lib,eeepc_laptop
evdev 5629 22
processor 25817 2 acpi_cpufreq
serio_raw 3104 0
output 1196 1 video
nls_base 4541 1 usbcore
snd_page_alloc 5097 2 snd_hda_intel,snd_pcm
agpgart 19551 2 drm,intel_agp
ext4 248724 3
mbcache 3762 1 ext4
jbd2 53025 1 ext4
crc16 1027 2 l2cap,ext4
sd_mod 26607 5
crc_t10dif 1012 1 sd_mod
thermal 9405 0
fan 2506 0
thermal_sys 9402 4 video,processor,thermal,fan
ata_generic 2043 0
ata_piix 17149 3
libata 115325 2 ata_generic,ata_piix
scsi_mod 102273 2 sd_mod,libata
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
iface ppp0 inet ppp
provider provider
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:22:51:6b:67:a6 brd ff:ff:ff:ff:ff:ff
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen
1000
link/ether 00:51:af:bc:97:b4 brd ff:ff:ff:ff:ff:ff
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether e5:53:ba:b7:5e:82 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 26964 346 0 0 0 0 0 0 26964
346 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 1 0
wlan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
326 total packets received
0 forwarded
0 incoming packets discarded
326 incoming packets delivered
326 requests sent out
160 outgoing packets dropped
Icmp:
160 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 160
160 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 160
IcmpMsg:
InType3: 160
OutType3: 160
Tcp:
13 active connections openings
0 passive connection openings
13 failed connection attempts
0 connection resets received
0 connections established
26 segments received
26 segments send out
0 segments retransmited
0 bad segments received.
13 resets sent
Udp:
0 packets received
160 packets to unknown port received.
0 packet receive errors
160 packets sent
UdpLite:
TcpExt:
0 packet headers predicted
IpExt:
InOctets: 25564
OutOctets: 25564
*** Device features:
eth0: 0x11989
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory
Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME
Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc80 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:831a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80600000-807fffff
Prefetchable memory behind bridge: 0000000080800000-00000000809fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0400 [size=32]
01:00.0 Network controller [0280]: RaLink RT2860 [1814:0781]
Subsystem: RaLink Device [1814:2790]
Physical Slot: eeepc-wifi
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
04:00.0 Ethernet controller [0200]: Atheros Communications Atheros
AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec80 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 001 Device 002: ID 05e3:0505 Genesys Logic, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.33-2-686 (SMP w/1 CPU core)
Locale: LANG=bg_BG.UTF-8, LC_CTYPE=bg_BG.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.33-2-686 depends on:
ii debconf [debconf 1.5.30 Debian configuration management sy
ii initramfs-tools 0.93.4 tools for generating an initramfs
ii linux-base 2.6.33-1~experimental.4 Linux image base package
ii module-init-tool 3.12~pre2-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.33-2-686 recommends:
ii firmware-linux-free 2.6.32-10 Binary firmware for various driver
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.33-2-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.33 <none> (no description available)
Versions of packages linux-image-2.6.33-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.23 Binary firmware for various driver
ii firmware-linux-nonfree 0.23 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.23 Binary firmware for Ralink RT2561,
-- debconf information:
linux-image-2.6.33-2-686/postinst/depmod-error-initrd-2.6.33-2-686: false
linux-image-2.6.33-2-686/postinst/bootloader-test-error-2.6.33-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.33-2-686/prerm/would-invalidate-boot-loader-2.6.33-2-686: true
linux-image-2.6.33-2-686/prerm/removing-running-kernel-2.6.33-2-686: true
linux-image-2.6.33-2-686/postinst/missing-firmware-2.6.33-2-686:
linux-image-2.6.33-2-686/postinst/bootloader-error-2.6.33-2-686:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20100406183148.ga2...@dee.ktnx.net
