--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-8
Severity: normal
Hi,
Today I tried to mount a share from alfresco via smbfs.
With older linux-image versions (I can test it with 2.6.30 for example):
mount -t smbfs //alfresco/share ~/alfresco
works fine and ls ~/alfresco show me all my files
But with this kernel 2.6.32-8:
mount -t smbfs //alfresco/share ~/alfresco
seems to work fine but ls ~/alfresco doesn't show me any file and I can't
access to them
I would try with a newer kernel, but kernel-archive.buildserver.net is down, at
least this tell our wiki (w.d.o/DebianKernel)
I have too a PDC which samba, and its shares are working when I access to them
with the two kernels (2.6.32 and 2.6.30). I'm afraid it could be an alfresco
issue :(, but like it works with 2.6.30 kernel version, I'm opening this bug.
Thank you very much
-- Package-specific info:
** Version:
Linux version 2.6.32-2-686 (Debian 2.6.32-8) (b...@decadent.org.uk) (gcc
version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Thu Feb 11 04:08:42 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-2-686 root=/dev/mapper/delorian-root ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 3.616063] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3.643900] PM: Starting manual resume from disk
[ 3.643905] PM: Resume from partition 254:1
[ 3.643908] PM: Checking hibernation image.
[ 3.644072] PM: Error -22 checking image file
[ 3.644076] PM: Resume from disk failed.
[ 3.668785] kjournald starting. Commit interval 5 seconds
[ 3.668799] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.762307] usb 3-1: New USB device found, idVendor=047f, idProduct=c001
[ 3.762314] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.762439] usb 3-1: configuration #1 chosen from 1 choice
[ 5.065247] udev: starting version 151
[ 5.375332] ACPI: SSDT 5ffe2b27 00453 (v01 COMPAQ CPU_TM2 00000001 MSFT
0100000E)
[ 5.375765] processor LNXCPU:00: registered as cooling_device0
[ 5.376043] processor LNXCPU:01: registered as cooling_device1
[ 5.378574] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.412751] parport_pc 00:07: reported by Plug and Play ACPI
[ 5.413107] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.493623] ACPI: WMI: Mapper loaded
[ 5.664936] intel_rng: Firmware space is locked read-only. If you can't or
[ 5.664939] intel_rng: don't want to disable this in firmware setup, and if
[ 5.664941] intel_rng: you are certain that your system has a functional
[ 5.664942] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 5.818603] usbcore: registered new interface driver hiddev
[ 5.822610] input: HID 047f:c001 as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.3/input/input4
[ 5.822715] generic-usb 0003:047F:C001.0001: input,hidraw0: USB HID v1.00
Device [HID 047f:c001] on usb-0000:00:1d.1-1/input3
[ 5.822744] usbcore: registered new interface driver usbhid
[ 5.822748] usbhid: v2.6:USB HID core driver
[ 6.149578] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 6.170870] nvidia: module license 'NVIDIA' taints kernel.
[ 6.170876] Disabling lock debugging due to kernel taint
[ 6.878130] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 6.878163] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.948782] usbcore: registered new interface driver snd-usb-audio
[ 6.967330] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 7.035693] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.035703] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.035927] NVRM: loading NVIDIA UNIX x86 Kernel Module 190.53 Tue Dec 8
18:51:41 PST 2009
[ 9.354537] EXT3 FS on dm-0, internal journal
[ 9.449650] loop: module loaded
[ 9.480534] smsc47b397: found SMSC SCH5307-NS (base address 0x0480, revision
0)
[ 9.520621] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 9.520625] vboxdrv: Successfully done.
[ 9.520628] vboxdrv: Found 2 processor cores.
[ 9.521197] vboxdrv: fAsync=0 offMin=0x915 offMax=0x3480
[ 9.521255] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 9.521258] vboxdrv: Successfully loaded version 3.1.4_OSE (interface
0x00100001).
[ 10.745840] kjournald starting. Commit interval 5 seconds
[ 10.746013] EXT3 FS on sda1, internal journal
[ 10.746021] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.797273] kjournald starting. Commit interval 5 seconds
[ 10.797513] EXT3 FS on dm-5, internal journal
[ 10.797519] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.826649] kjournald starting. Commit interval 5 seconds
[ 10.826878] EXT3 FS on dm-2, internal journal
[ 10.826885] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.844095] kjournald starting. Commit interval 5 seconds
[ 10.844295] EXT3 FS on dm-3, internal journal
[ 10.844301] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.873563] kjournald starting. Commit interval 5 seconds
[ 10.873753] EXT3 FS on dm-4, internal journal
[ 10.873760] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.501829] EXT4-fs (dm-28): warning: maximal mount count reached, running
e2fsck is recommended
[ 11.502399] EXT4-fs (dm-28): mounted filesystem with ordered data mode
[ 11.627231] EXT4-fs (dm-29): warning: maximal mount count reached, running
e2fsck is recommended
[ 11.628574] EXT4-fs (dm-29): mounted filesystem with ordered data mode
[ 11.833333] Adding 1572856k swap on /dev/mapper/delorian-swap. Priority:-1
extents:1 across:1572856k
[ 13.915529] 802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com>
[ 13.915534] All bugs added by David S. Miller <da...@redhat.com>
[ 14.018121] tg3 0000:3f:00.0: irq 27 for MSI/MSI-X
[ 14.064732] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.498621] Bridge firewalling registered
[ 14.510622] device vlan192 entered promiscuous mode
[ 14.511876] device eth0 entered promiscuous mode
[ 14.516576] br-lan: port 1(vlan192) entering forwarding state
[ 17.146645] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 17.146650] tg3: eth0: Flow control is off for TX and off for RX.
[ 17.146806] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.376316] device vlan99 entered promiscuous mode
[ 18.380822] br-gest: port 1(vlan99) entering learning state
[ 19.634012] fuse init (API version 7.13)
[ 24.712506] vlan192: no IPv6 routers present
[ 25.264506] br-lan: no IPv6 routers present
[ 27.152009] eth0: no IPv6 routers present
[ 28.512014] br-gest: no IPv6 routers present
[ 28.992008] vlan99: no IPv6 routers present
[ 33.380015] br-gest: port 1(vlan99) entering forwarding state
[ 34.824703] lp0: using parport0 (interrupt-driven).
[ 35.163576] ppdev: user-space parallel port driver
[ 4261.610460] Slow work thread pool: Starting up
[ 4261.613915] Slow work thread pool: Ready
[ 5051.884072] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 5051.884082] CIFS VFS: Send error in SessSetup = -13
[ 5051.884095] CIFS VFS: cifs_mount failed w/return code = -13
[ 5060.115599] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 5060.115609] CIFS VFS: Send error in SessSetup = -13
[ 5060.115619] CIFS VFS: cifs_mount failed w/return code = -13
[ 5062.611615] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 5062.611626] CIFS VFS: Send error in SessSetup = -13
[ 5062.611639] CIFS VFS: cifs_mount failed w/return code = -13
** Model information
not available
** Loaded modules:
Module Size Used by
nls_utf8 908 0
cifs 219974 0
ppdev 4058 0
lp 5570 0
vboxnetadp 5154 0
acpi_cpufreq 4907 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
cpufreq_userspace 1444 0
fuse 43554 1
bridge 32851 0
8021q 13950 0
garp 4066 1 8021q
stp 996 2 bridge,garp
ext4 254301 2
jbd2 55835 1 ext4
crc16 1027 1 ext4
vboxnetflt 10202 0
vboxdrv 114413 2 vboxnetadp,vboxnetflt
smsc47b397 2279 0
loop 9721 0
snd_hda_codec_realtek 162919 1
snd_usb_audio 50418 2
snd_usb_lib 10957 1 snd_usb_audio
snd_hda_intel 16211 0
snd_seq_midi 3576 0
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_seq_midi_event 3684 1 snd_seq_midi
snd_rawmidi 12505 2 snd_usb_lib,snd_seq_midi
snd_pcm 47362 4 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec
nvidia 8783671 28
usbhid 27756 0
snd_seq 35327 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 3 snd_pcm,snd_seq
rng_core 2178 0
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
hid 50593 1 usbhid
i2c_core 12612 1 nvidia
snd 34327 12
snd_hda_codec_realtek,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_rawmidi,snd_pcm,snd_hwdep,snd_seq,snd_timer,snd_seq_device
wmi 3575 0
psmouse 44381 0
soundcore 3450 1 snd
snd_page_alloc 4977 2 snd_hda_intel,snd_pcm
parport_pc 15799 1
serio_raw 2916 0
parport 22554 3 ppdev,lp,parport_pc
evdev 5609 13
pcspkr 1207 0
processor 25811 1 acpi_cpufreq
ext3 93828 6
jbd 31965 1 ext3
mbcache 3762 2 ext4,ext3
dm_mod 45878 73
sd_mod 25717 3
crc_t10dif 1012 1 sd_mod
ide_cd_mod 21044 0
cdrom 26487 1 ide_cd_mod
ata_generic 2015 0
ide_pci_generic 1924 0
uhci_hcd 15977 0
ehci_hcd 27346 0
tg3 88053 0
intel_agp 20165 0
ata_piix 16513 2
piix 3564 0
floppy 40923 0
agpgart 19516 2 nvidia,intel_agp
libphy 11238 1 tg3
libata 114180 2 ata_generic,ata_piix
button 3598 0
scsi_mod 101069 2 sd_mod,libata
ide_core 63850 3 ide_cd_mod,ide_pci_generic,piix
usbcore 97930 6
snd_usb_audio,snd_usb_lib,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 3 nls_utf8,cifs,usbcore
thermal 9206 0
fan 2586 0
thermal_sys 9378 3 processor,thermal,fan
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet manual
auto vlan192
iface vlan192 inet manual
vlan-raw-device eth0
auto vlan99
iface vlan99 inet manual
vlan-raw-device eth0
auto br-lan
iface br-lan inet static
address 192.168.101.120
netmask 255.255.0.0
bridge_ports vlan192
bridge_stp off
bridge_fd 0
gateway 192.168.100.1
auto br-gest
iface br-gest inet static
address 10.4.0.120
netmask 255.255.255.0
bridge_ports vlan99
bridge_stp off
bridge_maxwait 0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
inet6 fe80::217:a4ff:fe20:b5ad/64 scope link
valid_lft forever preferred_lft forever
3: vlan...@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP
link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
inet6 fe80::217:a4ff:fe20:b5ad/64 scope link
valid_lft forever preferred_lft forever
4: vla...@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP
link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
inet6 fe80::217:a4ff:fe20:b5ad/64 scope link
valid_lft forever preferred_lft forever
5: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UNKNOWN
link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
inet 192.168.101.120/16 brd 192.168.255.255 scope global br-lan
inet6 fe80::217:a4ff:fe20:b5ad/64 scope link
valid_lft forever preferred_lft forever
6: br-gest: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UNKNOWN
link/ether 00:17:a4:20:b5:ad brd ff:ff:ff:ff:ff:ff
inet 10.4.0.120/24 brd 10.4.0.255 scope global br-gest
inet6 fe80::217:a4ff:fe20:b5ad/64 scope link
valid_lft forever preferred_lft forever
7: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1160 20 0 0 0 0 0 0 1160
20 0 0 0 0 0 0
eth0:13319958 96517 0 0 0 0 0 30879 991519
5007 0 0 0 0 0 0
vlan192:10691567 92197 0 0 0 0 0 26791 940298
4923 0 8 0 0 0 0
vlan99: 204831 1427 0 0 0 0 0 1195 8831
80 0 0 0 0 0 0
br-lan:10511388 89432 0 0 0 0 0 85054 940438
4925 0 0 0 0 0 0
br-gest: 204411 1422 0 0 0 0 0 1403 8831
80 0 0 0 0 0 0
vboxnet0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
50644 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
36212 incoming packets delivered
4743 requests sent out
8 dropped because of missing route
Icmp:
3 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
echo requests: 3
3 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
echo replies: 3
IcmpMsg:
InType8: 3
OutType0: 3
Tcp:
186 active connections openings
5 passive connection openings
7 failed connection attempts
13 connection resets received
6 connections established
3196 segments received
3579 segments send out
3 segments retransmited
0 bad segments received.
64 resets sent
Udp:
25466 packets received
0 packets to unknown port received.
0 packet receive errors
1156 packets sent
UdpLite:
TcpExt:
1 resets received for embryonic SYN_RECV sockets
39 TCP sockets finished time wait in fast timer
389 delayed acks sent
Quick ack mode was activated 2 times
279 packets directly queued to recvmsg prequeue.
1649 packet headers predicted
398 acknowledgments not containing data payload received
683 predicted acknowledgments
3 congestion windows recovered without slow start after partial ack
3 other TCP timeouts
2 DSACKs sent for old packets
3 DSACKs received
9 connections reset due to unexpected data
11 connections reset due to early user close
IpExt:
InMcastPkts: 8577
OutMcastPkts: 194
InBcastPkts: 23293
OutBcastPkts: 119
InOctets: 8342549
OutOctets: 851165
InMcastOctets: 1671003
OutMcastOctets: 31637
InBcastOctets: 2912185
OutBcastOctets: 15552
*** Device features:
br-gest: 0x1800
br-lan: 0x1800
eth0: 0x109a3
lo: 0x13865
vboxnet0: 0x0
vlan192: 0x0
vlan99: 0x0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub [8086:2770] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root
Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e2000000-e51fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 60000000-601fffff
Prefetchable memory behind bridge: 0000000060200000-00000000603fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: e0200000-e04fffff
Prefetchable memory behind bridge: 0000000060400000-00000000605fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 2000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 2020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 2040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 2060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e0504000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 20a0 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 20d0 [size=8]
Region 1: I/O ports at 20e8 [size=4]
Region 2: I/O ports at 20d8 [size=8]
Region 3: I/O ports at 20ec [size=4]
Region 4: I/O ports at 20b0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9400
GT] [10de:0641] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
[virtual] Expansion ROM at e0000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752
Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 003 Device 002: ID 047f:c001 Plantronics, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-2-686 (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-2-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-2-686 recommends:
ii firmware-linux-free 2.6.32-8 Binary firmware for various driver
ii libc6-i686 2.10.2-5 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-2-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-2-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-2-686/prerm/would-invalidate-boot-loader-2.6.32-2-686: true
linux-image-2.6.32-2-686/postinst/bootloader-test-error-2.6.32-2-686:
* linux-image-2.6.32-2-686/postinst/missing-firmware-2.6.32-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-2-686/postinst/depmod-error-initrd-2.6.32-2-686: false
linux-image-2.6.32-2-686/postinst/bootloader-error-2.6.32-2-686:
linux-image-2.6.32-2-686/prerm/removing-running-kernel-2.6.32-2-686: true
--- End Message ---
