Package: linux-2.6
Version: 2.6.32-5
Justification: breaks the whole system
Severity: critical
After last "aptitude full-upgrade" the new kernel
"linux-image-2.6.32-trunk-686" was installed on my Debian squeeze system.
But every time I boot from the refered new kernel, I see the following
error message at the very beginning of the boot process:
"pci 0000:02:05.0: BAR 6: address space collision on of device
[0xfeaa0000-0xfeabffff]"
I also get that message by running the following command after booting:
dmesg | grep -i collision
After showing that message, the system boots apparently normal and I'm
able to graphically login via Gnome or LXDE.
But, after using the system for some minutes (it varies... could be 10
m, 30 m...) the system hangs completely, to the point that I can't even
kill X server (even via Ctrl+Alt+Backspace or Alt+SysRq+K) or start
another TTY console.
Also the "Num Lock" and "Caps Lock" lights on the keyboard start blinking.
So the only option is to turn off the computer by pressing the button on
the computer case!
Note:
I have 2 other computers, with different hardware (different graphics
card, etc), but they are also running Debian Squeeze and with similar
installation and configuration.
On one of them I don't get this bug. On the other of them I get
precisely this same bug.
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (b...@decadent.org.uk)
(gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=/dev/mapper/hda2_crypt ro quiet
** Not tainted
** Kernel log:
[ 3.432218] usb usb4: Product: UHCI Host Controller
[ 3.432222] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 3.432226] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.432332] usb usb4: configuration #1 chosen from 1 choice
[ 3.432383] hub 4-0:1.0: USB hub found
[ 3.432397] hub 4-0:1.0: 2 ports detected
[ 3.432473] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 3.432482] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.432488] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.432505] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 3.432531] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40
[ 3.432583] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.432588] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.432593] usb usb5: Product: UHCI Host Controller
[ 3.432597] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 3.432601] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.432721] usb usb5: configuration #1 chosen from 1 choice
[ 3.432772] hub 5-0:1.0: USB hub found
[ 3.432784] hub 5-0:1.0: 2 ports detected
[ 3.462019] SCSI subsystem initialized
[ 3.489580] libata version 3.00 loaded.
[ 3.510229] ide-cd driver 5.00
[ 3.514448] ide-gd driver 1.18
[ 3.514499] hda: max request size: 512KiB
[ 3.514926] hda: 234441648 sectors (120034 MB) w/2048KiB Cache,
CHS=16383/255/63
[ 3.515068] hda: cache flushes supported
[ 3.515135] hda:
[ 3.520090] ide-cd: hdc: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 3.520099] Uniform CD-ROM driver Revision: 3.20
[ 3.520281] hda1 hda2 hda3
[ 3.867258] device-mapper: uevent: version 1.0.3
[ 3.867692] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-de...@redhat.com
[ 21.534816] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 23.697805] udev: starting version 150
[ 24.315218] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 24.358559] processor LNXCPU:00: registered as cooling_device0
[ 24.359031] processor LNXCPU:01: registered as cooling_device1
[ 24.439641] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 24.451810] input: GenPS/2 Genius Mouse as
/devices/platform/i8042/serio1/input/input4
[ 24.499201] parport_pc 00:0a: reported by Plug and Play ACPI
[ 24.499316] parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE,EPP]
[ 24.534474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.537490] intel_rng: FWH not detected
[ 24.604346] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.416088] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 25.416166] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 25.744020] intel8x0_measure_ac97_clock: measured 54447 usecs (2624
samples)
[ 25.744026] intel8x0: clocking to 48000
[ 27.392792] loop: module loaded
[ 27.899877] EXT4-fs (hda1): mounted filesystem with ordered data mode
[ 27.952783] Adding 1984016k swap on /dev/mapper/hda3_crypt.
Priority:-1 extents:1 across:1984016k
[ 28.453119] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.494326] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 28.494970] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 28.494974] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack
module option or
[ 28.494977] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 28.743346] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 30.338229] fuse init (API version 7.13)
[ 37.359185] lp0: using parport0 (interrupt-driven).
[ 37.365599] ppdev: user-space parallel port driver
[ 40.638046] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 40.774419] [drm] Initialized drm 1.1.0 20060810
[ 40.852697] [drm] radeon defaulting to userspace modesetting.
[ 40.853738] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0
on minor 0
[ 41.146875] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 41.146899] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x
mode
[ 41.146942] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 41.412276] [drm] Setting GART location based on new memory map
[ 41.412351] [drm] Loading R300 Microcode
[ 41.412473] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 41.466258] [drm] Num pipes: 1
[ 41.466270] [drm] writeback test succeeded in 1 usecs
[ 42.424491] skge eth0: enabling interface
[ 42.428429] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.118966] skge eth0: Link is up at 100 Mbps, full duplex, flow
control both
[ 44.119133] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 54.812016] eth0: no IPv6 routers present
[ 149.460018] usb 1-3: new high speed USB device using ehci_hcd and
address 2
[ 149.596250] usb 1-3: New USB device found, idVendor=0951, idProduct=1601
[ 149.596256] usb 1-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 149.596259] usb 1-3: Product: DataTraveler II+
[ 149.596262] usb 1-3: Manufacturer: Kingston
[ 149.596265] usb 1-3: SerialNumber: 5B690B87417A
[ 149.596420] usb 1-3: configuration #1 chosen from 1 choice
[ 149.680141] Initializing USB Mass Storage driver...
[ 149.680279] scsi0 : SCSI emulation for USB Mass Storage devices
[ 149.680510] usbcore: registered new interface driver usb-storage
[ 149.680515] USB Mass Storage support registered.
[ 149.681042] usb-storage: device found at 2
[ 149.681047] usb-storage: waiting for device to settle before scanning
[ 154.680191] usb-storage: device scan complete
[ 154.680663] scsi 0:0:0:0: Direct-Access Kingston DataTraveler II+
PMAP PQ: 0 ANSI: 0 CCS
[ 155.131097] sd 0:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03
GB/991 MiB)
[ 155.131586] sd 0:0:0:0: [sda] Write Protect is off
[ 155.131591] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 155.131594] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 155.133711] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 155.133718] sda: sda1 sda2
[ 155.136254] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 155.136260] sd 0:0:0:0: [sda] Attached SCSI removable disk
** Model information
not available
** Loaded modules:
Module Size Used by
sd_mod 25717 0
crc_t10dif 1012 1 sd_mod
usb_storage 29825 0
radeon 398255 2
ttm 26008 1 radeon
drm_kms_helper 17183 1 radeon
drm 107507 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 3497 1 radeon
ppdev 4058 0
lp 5570 0
speedstep_lib 2468 0
cpufreq_conservative 4018 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
cpufreq_userspace 1444 0
fuse 43554 1
ipt_LOG 3570 3
xt_multiport 1775 2
xt_limit 1088 11
xt_state 927 34
xt_tcpudp 1743 35
ip6table_mangle 2559 0
ip6table_filter 1908 1
ip6_tables 8560 2 ip6table_mangle,ip6table_filter
iptable_mangle 2325 0
iptable_nat 3519 0
iptable_filter 1790 1
nf_nat_ftp 1483 0
nf_nat_irc 970 0
nf_nat 10456 3 iptable_nat,nf_nat_ftp,nf_nat_irc
nf_conntrack_ipv4 7597 37 iptable_nat,nf_nat
nf_defrag_ipv4 779 1 nf_conntrack_ipv4
nf_conntrack_ftp 4260 1 nf_nat_ftp
nf_conntrack_irc 2499 1 nf_nat_irc
nf_conntrack 37775 8
xt_state,iptable_nat,nf_nat_ftp,nf_nat_irc,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp,nf_conntrack_irc
ip_tables 7690 3 iptable_mangle,iptable_nat,iptable_filter
x_tables 8335 8
ipt_LOG,xt_multiport,xt_limit,xt_state,xt_tcpudp,ip6_tables,iptable_nat,ip_tables
loop 9721 0
firewire_sbp2 9575 0
snd_intel8x0 19523 1
snd_ac97_codec 79136 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28479 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47350 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3480 0
snd_rawmidi 12313 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35303 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
shpchp 21220 0
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
pci_hotplug 18065 1 shpchp
snd 33551 11
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc 15799 1
serio_raw 2916 0
rng_core 2178 0
parport 22554 3 ppdev,lp,parport_pc
soundcore 3450 1 snd
i2c_i801 6442 0
evdev 5609 10
processor 25803 0
pcspkr 1207 0
snd_page_alloc 4977 2 snd_intel8x0,snd_pcm
i2c_core 12612 4 radeon,drm,i2c_algo_bit,i2c_i801
psmouse 44409 0
ext4 254301 2
mbcache 3762 1 ext4
jbd2 55835 1 ext4
crc16 1027 1 ext4
sha256_generic 10748 4
twofish 5665 4
twofish_common 12560 1 twofish
cbc 2047 2
dm_crypt 9059 2
dm_mod 45854 5 dm_crypt
ide_gd_mod 17103 4
ide_cd_mod 21044 0
cdrom 26487 1 ide_cd_mod
ide_pci_generic 1924 0
ata_generic 2015 0
libata 113728 1 ata_generic
scsi_mod 101073 4 sd_mod,usb_storage,firewire_sbp2,libata
uhci_hcd 15953 0
intel_agp 20145 1
firewire_ohci 16477 0
piix 3564 3
ehci_hcd 27230 0
firewire_core 30915 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
skge 29398 0
floppy 40923 0
agpgart 19516 3 ttm,drm,intel_agp
ide_core 63850 4 ide_gd_mod,ide_cd_mod,ide_pci_generic,piix
usbcore 97930 4 usb_storage,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
button 3598 0
thermal 9206 0
fan 2586 0
thermal_sys 9378 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP
Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: bbf00000-fbefffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P
Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at eec0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ef00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ef20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ef40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 60000000-600fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
IDE Controller [8086:24db] (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at efe0 [size=8]
Region 1: I/O ports at efac [size=4]
Region 2: I/O ports at efa0 [size=8]
Region 3: I/O ports at efa8 [size=4]
Region 4: I/O ports at ef90 [size=16]
Region 5: Memory at 60100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard [1043:80a6]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:812a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ee80 [size=64]
Region 2: Memory at febfb800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at febfb400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP
[Radeon 9600] [1002:4150] (prog-if 00 [VGA controller])
Subsystem: C.P. Technology Co. Ltd Device [148c:2070]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AP [Radeon
9600] (Secondary) [1002:4170]
Subsystem: C.P. Technology Co. Ltd Device [148c:2071]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 16 bytes
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire
II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10
[OHCI])
Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard
[1043:808a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at feafe800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at dc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:05.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet
Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Expansion ROM at 60000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
02:0b.0 Modem [0703]: ALi Corporation SmartLink SmartPCI561 56K Modem
[10b9:5459] (prog-if 00 [Generic])
Subsystem: Smart Link Ltd. Device [10a5:5459]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feafd000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d400 [size=256]
Capabilities: <access denied>
Kernel driver in use: serial
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0951:1601 Kingston Technology DataTraveler II+
Pen Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an
initramfs
ii module-init-tools 3.11-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
ii firmware-linux-free 2.6.32-5 Binary firmware for various
driver
ii libc6-i686 2.10.2-2 GNU C Library: Shared
libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.22 Binary firmware for various
driver
ii firmware-linux-nonfree 0.22 Binary firmware for various
driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
