Package: linux-2.6 Version: 2.6.32-5 Severity: important There is a regression from linux-image-2.6.31-1-686-bigmem to linux-image-2.6.32-trunk-686-bigmem. DRM fails during boot.
here's the excerpt from dmesg: [ 0.967942] [drm] set up 15M of stolen space [ 0.968030] nommu_map_sg: overflow 13d800000+4096 of device mask ffffffff [ 0.968085] [drm:drm_agp_bind_pages] *ERROR* Failed to bind AGP memory: -12 [ 0.968159] [drm:i915_driver_load] *ERROR* failed to init modeset [ 0.973067] i915: probe of 0000:00:02.0 failed with error -28 on linux-image-2.6.32-trunk-686 drm works fine: [ 0.973466] [drm] set up 15M of stolen space [ 1.907642] [drm] TV-16: set mode NTSC 480i 0 [ 2.137173] [drm] LVDS-8: set mode 1280x800 1f [ 2.193497] Console: switching to colour frame buffer device 160x50 [ 2.197435] fb0: inteldrmfb frame buffer device [ 2.197436] registered panic notifier [ 2.197442] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on mi There's a bug report and patch at freedesktop.org which seems to have solved the issue: http://bugs.freedesktop.org/show_bug.cgi?id=25690 -- Package-specific info: ** Version: Linux version 2.6.32-trunk-686-bigmem (Debian 2.6.32-5) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 07:12:17 UTC 2010 ** Command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686-bigmem root=/dev/mapper/lnx-deb ro quiet splash ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [ 2.717089] usb 7-1: configuration #1 chosen from 1 choice [ 2.968008] usb 7-2: new full speed USB device using uhci_hcd and address 3 [ 3.159024] usb 7-2: New USB device found, idVendor=05ac, idProduct=022a [ 3.159027] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.159029] usb 7-2: Product: Apple Internal Keyboard / Trackpad [ 3.159031] usb 7-2: Manufacturer: Apple Computer [ 3.159102] usb 7-2: configuration #1 chosen from 1 choice [ 4.851098] udev: starting version 150 [ 5.319637] ACPI: AC Adapter [ADP1] (on-line) [ 5.390526] applesmc: Apple MacBook 4 detected: [ 5.390528] applesmc: - Model with accelerometer [ 5.390530] applesmc: - Model without light sensors and backlight [ 5.390531] applesmc: - Model with 10 temperature sensors [ 5.393953] applesmc: device has already been initialized (0xe0, 0x00). [ 5.393955] applesmc: device successfully initialized. [ 5.395385] applesmc: 1 fans found. [ 5.397678] input: applesmc as /devices/platform/applesmc.768/input/input5 [ 5.397697] applesmc: driver successfully loaded. [ 5.598854] ACPI: SSDT beecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109) [ 5.599125] ACPI: SSDT beec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) [ 5.600686] Monitor-Mwait will be used to enter C-1 state [ 5.600801] Monitor-Mwait will be used to enter C-2 state [ 5.600846] Monitor-Mwait will be used to enter C-3 state [ 5.600850] Marking TSC unstable due to TSC halts in idle [ 5.600922] processor LNXCPU:00: registered as cooling_device0 [ 5.601235] ACPI: SSDT beec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) [ 5.601442] ACPI: SSDT beec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) [ 5.601547] Switching to clocksource hpet [ 5.602073] processor LNXCPU:01: registered as cooling_device1 [ 5.682155] ACPI: Battery Slot [BAT0] (battery present) [ 5.892701] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 6.058556] usb 2-4: firmware: requesting isight.fw [ 6.186894] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 6.186899] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf] [ 6.186976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.281036] appletouch: Geyser mode initialized. [ 6.281119] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input7 [ 6.281199] usbcore: registered new interface driver appletouch [ 6.408677] Unable to load isight firmware [ 6.408759] usbcore: registered new interface driver isight_firmware [ 6.471731] usbcore: registered new interface driver hiddev [ 6.488533] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input8 [ 6.488602] generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0 [ 6.488618] usbhid 3-1:1.1: couldn't find an input interrupt endpoint [ 6.488767] usbcore: registered new interface driver usbhid [ 6.488769] usbhid: v2.6:USB HID core driver [ 6.517265] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 6.618163] apple 0003:05AC:8242.0002: hiddev96,hidraw1: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0 [ 6.622321] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input9 [ 6.622383] apple 0003:05AC:022A.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0 [ 6.625090] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input10 [ 6.625140] apple 0003:05AC:022A.0004: input,hidraw3: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2 [ 6.788098] usb 3-1: USB disconnect, address 2 [ 7.052045] usb 3-1: new full speed USB device using uhci_hcd and address 3 [ 7.246271] usb 3-1: New USB device found, idVendor=05ac, idProduct=8205 [ 7.246277] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.246386] usb 3-1: configuration #1 chosen from 1 choice [ 7.736617] Bluetooth: Core ver 2.15 [ 7.736713] NET: Registered protocol family 31 [ 7.736715] Bluetooth: HCI device and connection manager initialized [ 7.736717] Bluetooth: HCI socket layer initialized [ 7.819553] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 7.819695] usbcore: registered new interface driver btusb [ 8.219989] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 8.220033] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.311687] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 9.892007] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00cb2001 [ 10.261995] Adding 4882804k swap on /dev/sda4. Priority:-1 extents:1 across:4882804k [ 10.568038] EXT3 FS on dm-0, internal journal [ 10.811952] lib80211: common routines for IEEE802.11 drivers [ 10.811954] lib80211_crypt: registered algorithm 'NULL' [ 10.912657] wl: module license 'unspecified' taints kernel. [ 10.912660] Disabling lock debugging due to kernel taint [ 10.915540] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.915547] wl 0000:02:00.0: setting latency timer to 64 [ 10.935949] lib80211_crypt: registered algorithm 'TKIP' [ 10.936037] eth1: Broadcom BCM4328 802.11 Wireless Controller 5.10.91.9 [ 14.329309] sky2 eth0: enabling interface [ 14.329785] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.229757] fuse init (API version 7.13) [ 17.296228] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 17.296680] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.756135] eth1: no IPv6 routers present [ 27.993025] eth0: no IPv6 routers present ** Model information not available ** Loaded modules: Module Size Used by usb_storage 29857 0 cpufreq_powersave 602 0 cpufreq_stats 1940 0 cpufreq_conservative 4018 0 cpufreq_userspace 1444 0 fuse 43554 1 ext2 46141 1 coretemp 3225 0 acpi_cpufreq 4907 0 lib80211_crypt_tkip 6677 0 wl 1254563 0 lib80211 2834 2 lib80211_crypt_tkip,wl snd_hda_codec_realtek 162851 1 snd_hda_intel 15347 1 snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 4054 1 snd_hda_codec snd_pcm_oss 28479 0 btusb 8001 0 snd_mixer_oss 10461 1 snd_pcm_oss bluetooth 36259 1 btusb snd_pcm 47518 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss rfkill 10196 1 bluetooth snd_seq_midi 3480 0 snd_rawmidi 12313 1 snd_seq_midi snd_seq_midi_event 3684 1 snd_seq_midi snd_seq 35303 2 snd_seq_midi,snd_seq_midi_event snd_timer 12258 2 snd_pcm,snd_seq snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq snd 33551 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device hid_apple 3298 0 usbhid 26836 0 soundcore 3450 1 snd hid 50545 2 hid_apple,usbhid snd_page_alloc 5045 2 snd_hda_intel,snd_pcm appletouch 6513 0 i2c_i801 6446 0 isight_firmware 1509 0 pcspkr 1207 0 evdev 5609 23 battery 3782 0 processor 25811 3 acpi_cpufreq applesmc 14306 0 led_class 1757 1 applesmc input_polldev 1479 1 applesmc ac 1640 0 ext3 93828 1 jbd 31965 1 ext3 mbcache 3762 2 ext2,ext3 dm_mod 45854 7 sd_mod 25717 4 crc_t10dif 1012 1 sd_mod ata_generic 2015 0 uhci_hcd 16033 0 ata_piix 16561 3 ide_pci_generic 1924 0 libata 114048 2 ata_generic,ata_piix ehci_hcd 27626 0 firewire_ohci 16761 0 firewire_core 30955 1 firewire_ohci sky2 33172 0 crc_itu_t 1035 1 firewire_core ide_core 63922 1 ide_pci_generic scsi_mod 101077 3 usb_storage,sd_mod,libata usbcore 98278 8 usb_storage,btusb,usbhid,appletouch,isight_firmware,uhci_hcd,ehci_hcd nls_base 4541 1 usbcore thermal 9206 0 fan 2586 0 i915 217471 0 drm_kms_helper 17183 1 i915 i2c_algo_bit 3497 1 i915 button 3598 1 i915 video 14605 1 i915 thermal_sys 9378 4 processor,thermal,fan,video output 1204 1 video drm 108143 2 i915,drm_kms_helper i2c_core 12612 4 i2c_i801,i915,i2c_algo_bit,drm intel_agp 20409 1 agpgart 19576 3 drm,intel_agp ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 27 Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 6110 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 04) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 60c0 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 04) (prog-if 00 [UHCI]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 16 Region 4: I/O ports at 60a0 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 04) (prog-if 20 [EHCI]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 0: Memory at d0704c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 04) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0700000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d0600000-d06fffff Prefetchable memory behind bridge: 00000000d0800000-00000000d09fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0500000-d05fffff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d0400000-d04fffff Prefetchable memory behind bridge: ffffffffd0a00000-00000000d0bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 04) (prog-if 00 [UHCI]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 6080 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 04) (prog-if 00 [UHCI]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 6060 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 04) (prog-if 00 [UHCI]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 6040 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 04) (prog-if 20 [EHCI]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 20 Region 0: Memory at d0704800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Memory behind bridge: d0300000-d03fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 04) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 6108 [size=8] Region 1: I/O ports at 6124 [size=4] Region 2: I/O ports at 6100 [size=8] Region 3: I/O ports at 6120 [size=4] Region 4: I/O ports at 60e0 [size=16] 00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 60f8 [size=8] Region 1: I/O ports at 611c [size=4] Region 2: I/O ports at 60f0 [size=8] Region 3: I/O ports at 6118 [size=4] Region 4: I/O ports at 6020 [size=16] Region 5: I/O ports at 4000 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 04) Subsystem: Apple Computer Inc. Device [106b:00a1] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 20 Region 0: Memory at d0705000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] 02:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03) Subsystem: Apple Computer Inc. Device [106b:0088] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=16K] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: wl 03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Marvell Yukon 88E8058 PCI-E Gigabit Ethernet Controller [11ab:436a] (rev 13) Subsystem: Marvell Technology Group Ltd. Device [11ab:00ba] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 5000 [size=256] Expansion ROM at d0a00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 04:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 61) (prog-if 10 [OHCI]) Subsystem: Agere Systems FW322/323 [11c1:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 003 Device 003: ID 05ac:8205 Apple, Inc. Bluetooth HCI Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bb4:0c02 High Tech Computer Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 003: ID 05ac:022a Apple, Inc. Internal Keyboard/Trackpad (MacBook Pro) (ISO) Bus 007 Device 002: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 05ac:8300 Apple, Inc. Built-in iSight (no firmware loaded) Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (99, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-trunk-686-bigmem (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=el_GR.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-trunk-686-bigmem depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.11-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-trunk-686-bigmem recommends: ii firmware-linux-free 2.6.32-5 Binary firmware for various driver ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-trunk-686-bigmem suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-trunk-686-bigmem is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.22 Binary firmware for Ralink RT2561, -- debconf information excluded -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
