Package: linux-2.6
Version: 2.6.32-3
Severity: normal
I don't seem to have the CPU flags for Intel virtualisation from the processor
to run KVM, Xen and friends. I double-checked the BIOS and virtualisation
is enabled (it's a Q45 chipset with a Core2Duo E7400 processor, and a recent
BIOS).
I'm happy to include other information or try things if you direct me, since my
kernel experience is limited. I did wonder if I needed to load a module.
Thanks.
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-3) (b...@decadent.org.uk) (gcc
version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sat Dec 26 17:13:29 UTC 2009
** Command line:
BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64
root=UUID=674d09bc-8ab6-4744-8b4f-b1e5c3a61e54 ro quiet
** Not tainted
** Kernel log:
[ 4.788413] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.806669] udev: starting version 149
[ 6.013774] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.123250] ACPI: SSDT 00000000bd94cc18 002CC (v01 AMI IST 00000001
MSFT 03000001)
[ 6.123774] Marking TSC unstable due to TSC halts in idle
[ 6.123848] processor LNXCPU:00: registered as cooling_device0
[ 6.124084] processor LNXCPU:01: registered as cooling_device1
[ 6.124387] Switching to clocksource acpi_pm
[ 6.329255] cfg80211: Using static regulatory domain info
[ 6.329257] cfg80211: Regulatory domain: US
[ 6.329258] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 6.329260] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.329262] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.329264] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.329266] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.329267] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.329269] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.329405] cfg80211: Calling CRDA for country: US
[ 6.353684] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 6.560504] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 6.631671] phy0: Selected rate control algorithm 'minstrel'
[ 6.632129] Registered led device: b43-phy0::tx
[ 6.632141] Registered led device: b43-phy0::rx
[ 6.632153] Registered led device: b43-phy0::radio
[ 6.632193] Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
[ 6.822503] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 6.822559] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.248960] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 7.682349] EXT3 FS on sdb2, internal journal
[ 7.752849] loop: module loaded
[ 7.975459] kjournald starting. Commit interval 5 seconds
[ 7.975619] EXT3 FS on sda1, internal journal
[ 7.975625] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.049323] kjournald starting. Commit interval 5 seconds
[ 8.049473] EXT3 FS on sdb5, internal journal
[ 8.049477] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.072441] kjournald starting. Commit interval 5 seconds
[ 8.072669] EXT3 FS on sdb6, internal journal
[ 8.072673] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.112049] kjournald starting. Commit interval 5 seconds
[ 8.112062] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 8.112271] EXT3 FS on sdb7, internal journal
[ 8.112274] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.145522] kjournald starting. Commit interval 5 seconds
[ 8.145773] EXT3 FS on sdb8, internal journal
[ 8.145775] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.524042] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 9.564087] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 9.572774] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 9.576175] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 9.700047] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 9.816622] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.000361] wlan0: direct probe to AP 00:19:cb:01:96:ed (try 1)
[ 10.002323] wlan0: direct probe responded
[ 10.002325] wlan0: authenticate with AP 00:19:cb:01:96:ed (try 1)
[ 10.004194] wlan0: authenticated
[ 10.004203] wlan0: associate with AP 00:19:cb:01:96:ed (try 1)
[ 10.006430] wlan0: RX AssocResp from 00:19:cb:01:96:ed (capab=0x431 status=0
aid=1)
[ 10.006431] wlan0: associated
[ 10.007194] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 10.024035] cfg80211: Calling CRDA for country: AU
[ 13.294481] fuse init (API version 7.13)
[ 20.340019] wlan0: no IPv6 routers present
[ 23.519811] Bluetooth: Core ver 2.15
[ 23.519883] NET: Registered protocol family 31
[ 23.519885] Bluetooth: HCI device and connection manager initialized
[ 23.519888] Bluetooth: HCI socket layer initialized
[ 23.555228] Bluetooth: L2CAP ver 2.14
[ 23.555231] Bluetooth: L2CAP socket layer initialized
[ 23.570446] Bluetooth: RFCOMM TTY layer initialized
[ 23.570451] Bluetooth: RFCOMM socket layer initialized
[ 23.570453] Bluetooth: RFCOMM ver 1.11
[ 23.626561] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.626565] Bluetooth: BNEP filters: protocol multicast
[ 23.645058] Bridge firewalling registered
[ 23.669646] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.669648] Bluetooth: SCO socket layer initialized
[ 25.302901] lp: driver loaded but no devices found
[ 25.308289] ppdev: user-space parallel port driver
[ 27.095908] [drm] Initialized drm 1.1.0 20060810
[ 27.201428] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 27.201432] pci 0000:00:02.0: setting latency timer to 64
[ 27.215799] mtrr: type mismatch for c0000000,10000000 old: write-back new:
write-combining
[ 27.215802] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 27.215864] alloc irq_desc for 26 on node -1
[ 27.215866] alloc kstat_irqs on node -1
[ 27.215874] pci 0000:00:02.0: irq 26 for MSI/MSI-X
[ 27.215955] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD
(20090903/video-1882)
[ 27.216026] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 27.216060] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 27.216074] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 27.369374] lo: Disabled Privacy Extensions
[ 39.021077] CPU0 attaching NULL sched-domain.
[ 39.021083] CPU1 attaching NULL sched-domain.
[ 39.032097] CPU0 attaching sched-domain:
[ 39.032101] domain 0: span 0-1 level MC
[ 39.032103] groups: 0 1
[ 39.032110] CPU1 attaching sched-domain:
[ 39.032112] domain 0: span 0-1 level MC
[ 39.032114] groups: 1 0
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: CBQ4510H.86A.0093.2009.0724.1353
board_vendor: Intel Corporation
board_name: DQ45CB
board_version: AAE30148-205
** Loaded modules:
Module Size Used by
i915 247359 2
drm_kms_helper 18883 1 i915
drm 137190 4 i915,drm_kms_helper
i2c_algo_bit 4225 1 i915
ppdev 5030 0
lp 7462 0
parport 27938 2 ppdev,lp
sco 7193 2
bridge 39582 0
stp 1440 1 bridge
bnep 9395 2
rfcomm 29501 0
l2cap 24656 4 bnep,rfcomm
crc16 1319 1 l2cap
bluetooth 41795 6 sco,bnep,rfcomm,l2cap
acpi_cpufreq 5555 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
binfmt_misc 6431 1
fuse 50078 1
ext2 52969 1
coretemp 4165 0
lm85 18977 0
hwmon_vid 1828 1 lm85
firewire_sbp2 11450 0
loop 11767 0
snd_hda_codec_analog 64530 1
snd_hda_intel 17851 1
snd_hda_codec 52900 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 5364 1 snd_hda_codec
snd_pcm_oss 32415 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60615 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4208 0
snd_rawmidi 15291 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42769 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15502 2 snd_pcm,snd_seq
arc4 1274 2
snd_seq_device 4477 3 snd_seq_midi,snd_rawmidi,snd_seq
ecb 1841 2
b43 144517 0
rng_core 2990 2 b43
mac80211 135183 1 b43
snd 44718 13
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 4614 1 snd
i2c_i801 7590 0
i2c_core 15584 5 i915,drm,i2c_algo_bit,lm85,i2c_i801
cfg80211 101285 2 b43,mac80211
rfkill 12996 3 bluetooth,cfg80211
led_class 2401 1 b43
snd_page_alloc 6217 2 snd_hda_intel,snd_pcm
joydev 8411 0
processor 29479 3 acpi_cpufreq
evdev 7336 19
pcspkr 1699 0
serio_raw 3752 0
psmouse 36039 0
ext3 106454 6
jbd 37037 1 ext3
mbcache 4970 2 ext2,ext3
dm_mod 53658 0
usbhid 31196 0
hid 62745 1 usbhid
sg 18728 0
sr_mod 12602 0
sd_mod 29673 9
crc_t10dif 1276 1 sd_mod
cdrom 29399 1 sr_mod
ide_pci_generic 2788 0
ide_core 76802 1 ide_pci_generic
uhci_hcd 18457 0
ata_generic 2983 0
ahci 31494 7
intel_agp 25521 1
ata_piix 19757 0
video 17445 1 i915
output 1692 1 video
agpgart 24733 3 drm,intel_agp
e1000e 109871 0
libata 131655 3 ata_generic,ahci,ata_piix
button 4618 1 i915
ehci_hcd 30578 0
firewire_ohci 19436 0
firewire_core 36560 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
ssb 34873 1 b43
pcmcia 19426 2 b43,ssb
pcmcia_core 24054 3 b43,ssb,pcmcia
scsi_mod 121909 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore 121559 4 usbhid,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
thermal 11674 0
fan 3346 0
thermal_sys 11878 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller
[8086:2e10] (rev 03)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f220 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset
Integrated Graphics Controller [8086:2e13] (rev 03)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset
HECI Controller [8086:2e14] (rev 03)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d062a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER
Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at f210 [size=8]
Region 1: I/O ports at f200 [size=4]
Region 2: I/O ports at f1f0 [size=8]
Region 3: I/O ports at f1e0 [size=4]
Region 4: I/O ports at f1d0 [size=16]
Capabilities: <access denied>
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT
Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at f1c0 [size=8]
Region 1: Memory at d0629000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network
Connection [8086:10de] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at d0600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d0628000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f100 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at f0e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at f0c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0627000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD
Audio Controller [8086:3a6e] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at f060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0626000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface
Controller [8086:3a14] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family)
SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 25
Region 0: I/O ports at f1b0 [size=8]
Region 1: I/O ports at f1a0 [size=4]
Region 2: I/O ports at f190 [size=8]
Region 3: I/O ports at f180 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at d0625000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus
Controller [8086:3a60] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0624000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family)
2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f170 [size=8]
Region 1: I/O ports at f160 [size=4]
Region 2: I/O ports at f150 [size=8]
Region 3: I/O ports at f140 [size=4]
Region 4: I/O ports at f130 [size=16]
Region 5: I/O ports at f120 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Belkin F5D7000uk 54G Wireless Network Card [1799:7000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
01:01.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev
70) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0503000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at d0502000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:00e3 Microsoft Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-3 Binary firmware for various driver
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.32-trunk-amd64/postinst/depmod-error-initrd-2.6.32-trunk-amd64:
false
linux-image-2.6.32-trunk-amd64/prerm/would-invalidate-boot-loader-2.6.32-trunk-amd64:
true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-error-2.6.32-trunk-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-amd64/prerm/removing-running-kernel-2.6.32-trunk-amd64:
true
linux-image-2.6.32-trunk-amd64/postinst/bootloader-test-error-2.6.32-trunk-amd64:
* linux-image-2.6.32-trunk-amd64/postinst/missing-firmware-2.6.32-trunk-amd64:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
