Package: linux-2.6
Version: 2.6.32-3
Severity: normal
Without a serial console, all I can tell is that the root disk is
accessed briefly and then the boot must fail as there is no further disk
activity.
I wonder if bug #561309 is really fixed.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
not available
** PCI devices:
00:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
[10ec:8169]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (1000ns min, 250ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 90000000 [size=256]
Region 1: Memory at 800a0200 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 80080000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
00:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
[10ec:8169]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 64 (1000ns min, 250ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 30
Region 0: I/O ports at 90000400 [size=256]
Region 1: Memory at 800a0300 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 80090000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
00:03.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3512
[SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3512 SATALink Controller [1095:3512]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: I/O ports at 90000850 [size=8]
Region 1: I/O ports at 90000860 [size=4]
Region 2: I/O ports at 90000858 [size=8]
Region 3: I/O ports at 90000864 [size=4]
Region 4: I/O ports at 90000840 [size=16]
Region 5: Memory at 800a0000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 80000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
00:04.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 4: I/O ports at 90000800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:04.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 27
Region 4: I/O ports at 90000820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:04.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 29
Region 0: Memory at 800a0400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 041e:3040 Creative Technology, Ltd SoundBlaster Live!
24-bit External SB0490
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 152d:2336 JMicron Technology Corp. / JMicron USA
Technology Corp. Hard Disk Drive
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.30-2-iop32x
Locale: LANG=, LC_CTYPE= (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-iop32x depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-iop32x recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-iop32x suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-iop32x is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.22 Binary firmware for Ralink RT2561,
-- debconf information excluded
--
see shy jo
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
