Package: linux-image-2.6.26-2-amd64
Version: 2.6.26-17
Followup-For: Bug #545879
I'm experiencing this same issue on a cluster of Debian 5 desktops, on systems
running AMD Opteron CPU's (including 250's, 252's and 270's model CPU's). We
also saw the issue when running 2.6.26-15 kernel from Debian 5.0.1. I have not
yet tried the 2.6.26-19 kernel.
On 19 separate systems, I see a count of 422 "CPU stuck" messages since July
that all vary in what process was stuck (examples include swapper, pdflush,
csh, nfsd). In some cases the machine locks up, in some cases it does not. It
frequently happens when the machine is under a load average of 4 or 5. Right
before the machine locks up, sar sometimes is able to log that the load average
spikes really high in the 40's or 50's in some cases and top reports that 99.9%
of processes are in the wait queue (hence the high load average). Users report
having to frequently reboot their systems. Anywhere from daily to weekly
depending if their machine is being used for software testing which brings the
load to 4 or 5.
FWIW, We do not experience this issue on any of our Intel Core 2 Duo or Core 2
Quad systems which use the same kernel.
Things I've done/tried:
-Moved from 2.6.26-15 to 2.6.26-17 kernel on all systems
-Booting with or without "noapic" kernel option
-Run system tests to verify hardware is OK (memtest, etc)
Regards,
Mike Carvalho
-- Package-specific info:
** Version:
Linux version 2.6.26-2-amd64 (Debian 2.6.26-17) (da...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:47:08 UTC
2009
** Command line:
root=/dev/sda1 ro noapic
** Not tainted
** Kernel log:
[ 4861.802285] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/class/input/input12
[ 4861.866379] input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button
Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.4
[ 4861.866506] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0039
[ 4861.866510] usb 1-1.4: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[ 4861.866512] usb 1-1.4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 4861.866515] usb 1-1.4: Manufacturer: Microsoft
[ 4879.701818] usb 1-1.4: USB disconnect, address 11
[ 4943.533640] usb 1-1.4: new low speed USB device using ohci_hcd and address 12
[ 4943.663514] usb 1-1.4: configuration #1 chosen from 1 choice
[ 4943.675516] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/class/input/input13
[ 4943.724187] input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button
Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.4
[ 4943.724317] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0039
[ 4943.724320] usb 1-1.4: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[ 4943.724323] usb 1-1.4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 4943.724326] usb 1-1.4: Manufacturer: Microsoft
[ 4970.028257] usb 1-1.4: USB disconnect, address 12
[ 4979.209982] usb 1-1.4: new low speed USB device using ohci_hcd and address 13
[ 4979.323378] usb 1-1.4: configuration #1 chosen from 1 choice
[ 4979.353771] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/class/input/input14
[ 4979.383293] input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button
Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.4
[ 4979.383412] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0039
[ 4979.383444] usb 1-1.4: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[ 4979.383447] usb 1-1.4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 4979.383450] usb 1-1.4: Manufacturer: Microsoft
[ 5174.195747] usb 1-1.4: USB disconnect, address 13
[11702.201369] usb 1-1.4: new low speed USB device using ohci_hcd and address 14
[11702.385328] usb 1-1.4: configuration #1 chosen from 1 choice
[11702.401543] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/class/input/input15
[11702.462086] input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button
Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.4
[11702.462204] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0039
[11702.462207] usb 1-1.4: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[11702.462210] usb 1-1.4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[11702.462212] usb 1-1.4: Manufacturer: Microsoft
[11979.976394] usb 1-1.4: USB disconnect, address 14
[78873.685912] eth0: too many iterations (6) in nv_nic_irq.
[81474.457655] INFO: task find:26411 blocked for more than 120 seconds.
[81474.457663] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
[81474.457666] find D 0000000000000000 0 26411 26410
[81474.457671] ffff81011ef899c8 0000000000000086 ffff81011ef89990
ffff81007490b2c0
[81474.457675] ffff81013d92a280 ffff81007fb8e080 ffff81013d92a508
000000017490b2c0
[81474.457679] 000000000000ffff 000000000000124b 00000000ffffffff
0000000000000000
[81474.457682] Call Trace:
[81474.457708] [<ffffffff802bace1>] sync_buffer+0x0/0x3f
[81474.457713] [<ffffffff804284c7>] io_schedule+0x5c/0x9e
[81474.457718] [<ffffffff802bad1c>] sync_buffer+0x3b/0x3f
[81474.457722] [<ffffffff80428722>] __wait_on_bit+0x40/0x6e
[81474.457727] [<ffffffff802bace1>] sync_buffer+0x0/0x3f
[81474.457731] [<ffffffff804287bc>] out_of_line_wait_on_bit+0x6c/0x78
[81474.457736] [<ffffffff802461f3>] wake_bit_function+0x0/0x23
[81474.457753] [<ffffffffa0139881>] :ext3:ext3_bread+0x48/0x62
[81474.457764] [<ffffffffa013bf60>] :ext3:ext3_find_entry+0x188/0x5d5
[81474.457770] [<ffffffff80287382>] page_referenced_one+0x76/0xbd
[81474.457780] [<ffffffff80279548>] __pagevec_release+0x19/0x22
[81474.457784] [<ffffffff8027a3b6>] shrink_active_list+0x520/0x52e
[81474.457792] [<ffffffff80277843>] get_dirty_limits+0x1d/0x232
[81474.457806] [<ffffffffa013db60>] :ext3:ext3_lookup+0x31/0xc9
[81474.457810] [<ffffffff802ab4b8>] d_alloc+0x15b/0x1a8
[81474.457816] [<ffffffff802a1c42>] do_lookup+0xd7/0x1c1
[81474.457823] [<ffffffff802a3da0>] __link_path_walk+0x87a/0xd05
[81474.457827] [<ffffffff8027cace>] zone_statistics+0x3a/0x8e
[81474.457831] [<ffffffff8027646b>] get_page_from_freelist+0x460/0x607
[81474.457835] [<ffffffff802793a1>] activate_page+0xac/0xd4
[81474.457843] [<ffffffff802a4271>] path_walk+0x46/0x8b
[81474.457850] [<ffffffff802a459d>] do_path_lookup+0x158/0x1cf
[81474.457856] [<ffffffff802a50e1>] __path_lookup_intent_open+0x56/0x96
[81474.457863] [<ffffffff802a5216>] do_filp_open+0x9c/0x7c4
[81474.457874] [<ffffffff80221fac>] do_page_fault+0x5d8/0x9c8
[81474.457881] [<ffffffff802994ac>] get_unused_fd_flags+0x71/0x115
[81474.457887] [<ffffffff80299596>] do_sys_open+0x46/0xc3
[81474.457893] [<ffffffff8020beca>] system_call_after_swapgs+0x8a/0x8f
[81474.457900]
[82929.314974] Clocksource tsc unstable (delta = 4686979679 ns)
[229351.646978] eth0: too many iterations (6) in nv_nic_irq.
[275440.298904] usb 1-1.4: new low speed USB device using ohci_hcd and address
15
[275440.401160] usb 1-1.4: configuration #1 chosen from 1 choice
[275440.437822] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)
as /class/input/input16
[275440.493661] input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft
5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.4
[275440.497508] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0039
[275440.497508] usb 1-1.4: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[275440.497508] usb 1-1.4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[275440.497508] usb 1-1.4: Manufacturer: Microsoft
[275467.504001] usb 1-1.4: USB disconnect, address 15
[275480.065498] usb 1-1.4: new low speed USB device using ohci_hcd and address
16
[275480.197282] usb 1-1.4: configuration #1 chosen from 1 choice
[275480.215648] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)
as /class/input/input17
[275480.271471] input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft
5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.4
[275480.271606] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0039
[275480.271612] usb 1-1.4: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[275480.271615] usb 1-1.4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[275480.271619] usb 1-1.4: Manufacturer: Microsoft
[275490.371926] usb 1-1.4: USB disconnect, address 16
[278954.636572] usb 1-1.4: new low speed USB device using ohci_hcd and address
17
[278954.738567] usb 1-1.4: configuration #1 chosen from 1 choice
[278954.860423] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)
as /class/input/input18
[278954.909632] input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft
5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.4
[278954.909788] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0039
[278954.909800] usb 1-1.4: New USB device strings: Mfr=1, Product=3,
SerialNumber=0
[278954.909808] usb 1-1.4: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[278954.909816] usb 1-1.4: Manufacturer: Microsoft
[279081.828048] usb 1-1.4: USB disconnect, address 17
** Loaded modules:
Module Size Used by
nfsd 248360 13
auth_rpcgss 47520 1 nfsd
exportfs 8704 1 nfsd
nfs 251696 21
lockd 68944 2 nfsd,nfs
nfs_acl 7552 2 nfsd,nfs
sunrpc 197992 48 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
autofs4 24200 12
battery 16776 0
ipv6 288328 30
smsc47b397 10384 0
psmouse 42268 0
uhci_hcd 25760 0
usbkbd 10112 0
snd_intel8x0 36136 1
snd_ac97_codec 115416 1 snd_intel8x0
ac97_bus 6272 1 snd_ac97_codec
snd_pcm_oss 41760 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_pcm 81672 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 7428 0
snd_seq_oss 33280 0
snd_seq_midi 11072 0
snd_rawmidi 26784 1 snd_seq_midi
snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
snd_seq 54304 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
container 8320 0
shpchp 34208 0
snd 63688 12
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pci_hotplug 32056 1 shpchp
i2c_nforce2 10752 0
pcspkr 7040 0
k8temp 9216 0
button 11680 0
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_intel8x0,snd_pcm
i2c_core 27936 1 i2c_nforce2
evdev 14208 3
ext3 124944 1
jbd 51240 1 ext3
mbcache 12804 1 ext3
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
sd_mod 29376 3
ide_pci_generic 9220 0 [permanent]
usbhid 45920 0
hid 41664 1 usbhid
ff_memless 9224 1 usbhid
amd74xx 13448 0 [permanent]
ide_core 128284 3 ide_cd_mod,ide_pci_generic,amd74xx
sata_nv 27528 2
floppy 61672 0
ata_generic 10116 0
forcedeth 54032 0
libata 165600 2 sata_nv,ata_generic
ehci_hcd 35980 0
scsi_mod 160760 2 sd_mod,libata
dock 14112 1 libata
ohci_hcd 25092 0
thermal 22816 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller
[10de:005e] (rev a4)
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0051] (rev
b1)
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at <ignored>
00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1000 [size=32]
Region 4: I/O ports at a000 [size=64]
Region 5: I/O ports at a040 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller
[10de:005a] (rev a2) (prog-if 10 [OHCI])
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller
[10de:005b] (rev a4) (prog-if 20 [EHCI])
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 7
Region 0: Memory at b0001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97
Audio Controller [10de:0059] (rev a2)
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=256]
Region 1: I/O ports at 1400 [size=256]
Region 2: Memory at b0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f3)
(prog-if 8a [Master SecP PriP])
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 1c00 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: ata_generic, amd74xx, ide-pci-generic
00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller
[10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1c40 [size=8]
Region 1: I/O ports at 1c34 [size=4]
Region 2: I/O ports at 1c38 [size=8]
Region 3: I/O ports at 1c30 [size=4]
Region 4: I/O ports at 1c10 [size=16]
Region 5: Memory at b0003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, ide-pci-generic
00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller
[10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1c58 [size=8]
Region 1: I/O ports at 1c4c [size=4]
Region 2: I/O ports at 1c50 [size=8]
Region 3: I/O ports at 1c48 [size=4]
Region 4: I/O ports at 1c20 [size=16]
Region 5: Memory at b0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, ide-pci-generic
00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: b0100000-b01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057]
(rev a3)
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1c60 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d]
(rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b1000000-b3ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS
[10de:06e4] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device [1462:1163]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at b2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel modules: nvidiafb
10:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=10, secondary=11, subordinate=11, sec-latency=0
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
10:0a.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4K]
10:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=10, secondary=12, subordinate=12, sec-latency=0
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
10:0b.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0001000 (64-bit, non-prefetchable) [size=4K]
80:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller
[10de:005e] (rev a4)
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
80:01.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller
[10de:00d3] (rev b1)
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 1: Memory at d0400000 (32-bit, non-prefetchable) [size=4K]
80:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057]
(rev a3)
Subsystem: Tyan Computer Device [10f1:2895]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0401000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
80:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d]
(rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-2-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
ii linux-doc-2.6.26 2.6.26-17 Linux kernel specific documentatio
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-amd64/postinst/bootloader-error-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/preinst/lilo-initrd-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/postinst/depmod-error-2.6.26-2-amd64: false
linux-image-2.6.26-2-amd64/postinst/old-dir-initrd-link-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/postinst/create-kimage-link-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/preinst/initrd-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-amd64/preinst/abort-install-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/postinst/old-initrd-link-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/postinst/depmod-error-initrd-2.6.26-2-amd64: false
linux-image-2.6.26-2-amd64/postinst/bootloader-test-error-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/preinst/overwriting-modules-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-amd64/preinst/failed-to-move-modules-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/prerm/would-invalidate-boot-loader-2.6.26-2-amd64:
true
linux-image-2.6.26-2-amd64/postinst/old-system-map-link-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/preinst/abort-overwrite-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/preinst/bootloader-initrd-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/preinst/elilo-initrd-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/prerm/removing-running-kernel-2.6.26-2-amd64: true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
