Ben Hutchings scrisse in data 05/10/2009 15:19:
> Did an earlier kernel version work better on this hardware?
>
I don't know but seem to be at least from 2.4.27
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=323452)
> Please send a longer kernel log showing the errors related to hda (the
> section below is full of firewall messages). Then, try replacing the
> cable to the HD.
>
I have already tried to change the cable without any changes...
These are new fresh kernel logs with the firewall disabled:
> Oct 6 09:15:33 proDFS kernel: imklog 3.18.6, log source = /proc/kmsg
> started.
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Initializing cgroup
> subsys cpuset
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Initializing cgroup
> subsys cpu
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Linux version
> 2.6.26-2-686 (Debian 2.6.26-19) (da...@debian.org) (gcc version 4.1.3
> 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52
> UTC 2009
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] BIOS-provided physical
> RAM map:
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] BIOS-e820:
> 0000000000000000 - 00000000000a0000 (usable)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] BIOS-e820:
> 00000000000f0000 - 0000000000100000 (reserved)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] BIOS-e820:
> 0000000000100000 - 000000000fff0000 (usable)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] BIOS-e820:
> 000000000fff0000 - 000000000fff3000 (ACPI NVS)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] BIOS-e820:
> 000000000fff3000 - 0000000010000000 (ACPI data)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] BIOS-e820:
> 00000000ffff0000 - 0000000100000000 (reserved)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] 0MB HIGHMEM available.
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] 255MB LOWMEM available.
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Entering
> add_active_range(0, 0, 65520) 0 entries of 256 used
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Zone PFN ranges:
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] DMA 0
> -> 4096
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Normal 4096
> -> 65520
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] HighMem 65520
> -> 65520
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Movable zone start PFN
> for each node
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] early_node_map[1] active
> PFN ranges
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] 0: 0 -> 65520
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] On node 0 totalpages: 65520
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] DMA zone: 32 pages
> used for memmap
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] DMA zone: 0 pages reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] DMA zone: 4064 pages,
> LIFO batch:0
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Normal zone: 480 pages
> used for memmap
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Normal zone: 60944
> pages, LIFO batch:15
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] HighMem zone: 0 pages
> used for memmap
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Movable zone: 0 pages
> used for memmap
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] DMI 2.3 present.
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] ACPI: RSDP 000F6E10,
> 0014 (r0 VIA694)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] ACPI: RSDT 0FFF3000,
> 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] ACPI: FACP 0FFF3040,
> 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] ACPI: DSDT 0FFF30C0,
> 2479 (r1 VIA694 AWRDACPI 1000 MSFT 100000C)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] ACPI: FACS 0FFF0000, 0040
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] ACPI: PM-Timer IO Port:
> 0x4008
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Allocating PCI resources
> starting at 20000000 (gap: 10000000:efff0000)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] PM: Registered nosave
> memory: 00000000000a0000 - 00000000000f0000
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] PM: Registered nosave
> memory: 00000000000f0000 - 0000000000100000
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] SMP: Allowing 0 CPUs, 0
> hotplug CPUs
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] PERCPU: Allocating 37960
> bytes of per cpu data
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Built 1 zonelists in
> Zone order, mobility grouping on. Total pages: 65008
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Kernel command line:
> root=/dev/hda1 ro quiet nohdparm
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Local APIC disabled by
> BIOS -- you can enable it with "lapic"
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] mapped APIC to ffffb000
> (0120c000)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Enabling fast FPU save
> and restore... done.
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Enabling unmasked SIMD
> FPU exception support... done.
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Initializing CPU#0
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] PID hash table entries:
> 1024 (order: 10, 4096 bytes)
> Oct 6 09:15:33 proDFS kernel: [ 0.000000] Detected 799.759 MHz
> processor.
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] Console: colour VGA+ 80x25
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] console [tty0] enabled
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] Dentry cache hash table
> entries: 32768 (order: 5, 131072 bytes)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] Inode-cache hash table
> entries: 16384 (order: 4, 65536 bytes)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] Memory: 249924k/262080k
> available (1770k kernel code, 11580k reserved, 751k data, 244k init,
> 0k highmem)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] virtual kernel memory
> layout:
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] fixmap : 0xfff4c000
> - 0xfffff000 ( 716 kB)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] pkmap : 0xff800000
> - 0xffc00000 (4096 kB)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] vmalloc : 0xd0800000
> - 0xff7fe000 ( 751 MB)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] lowmem : 0xc0000000
> - 0xcfff0000 ( 255 MB)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] .init : 0xc037f000
> - 0xc03bc000 ( 244 kB)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] .data : 0xc02ba9a9
> - 0xc0376620 ( 751 kB)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] .text : 0xc0100000
> - 0xc02ba9a9 (1770 kB)
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] Checking if this
> processor honours the WP bit even in supervisor mode...Ok.
> Oct 6 09:15:33 proDFS kernel: [ 0.004000] CPA: page pool
> initialized 1 of 1 pages preallocated
> Oct 6 09:15:33 proDFS kernel: [ 0.084354] Calibrating delay using
> timer specific routine.. 1601.95 BogoMIPS (lpj=3203912)
> Oct 6 09:15:33 proDFS kernel: [ 0.084455] Security Framework
> initialized
> Oct 6 09:15:33 proDFS kernel: [ 0.084473] SELinux: Disabled at boot.
> Oct 6 09:15:33 proDFS kernel: [ 0.084485] Capability LSM initialized
> Oct 6 09:15:33 proDFS kernel: [ 0.084529] Mount-cache hash table
> entries: 512
> Oct 6 09:15:33 proDFS kernel: [ 0.084890] Initializing cgroup
> subsys ns
> Oct 6 09:15:33 proDFS kernel: [ 0.084902] Initializing cgroup
> subsys cpuacct
> Oct 6 09:15:33 proDFS kernel: [ 0.084909] Initializing cgroup
> subsys devices
> Oct 6 09:15:33 proDFS kernel: [ 0.084960] CPU: L1 I cache: 16K, L1
> D cache: 16K
> Oct 6 09:15:33 proDFS kernel: [ 0.084969] CPU: L2 cache: 256K
> Oct 6 09:15:33 proDFS kernel: [ 0.084979] Intel machine check
> architecture supported.
> Oct 6 09:15:33 proDFS kernel: [ 0.084989] Intel machine check
> reporting enabled on CPU#0.
> Oct 6 09:15:33 proDFS kernel: [ 0.085023] Checking 'hlt'
> instruction... OK.
> Oct 6 09:15:33 proDFS kernel: [ 0.100786] SMP alternatives:
> switching to UP code
> Oct 6 09:15:33 proDFS kernel: [ 0.111618] Freeing SMP
> alternatives: 16k freed
> Oct 6 09:15:33 proDFS kernel: [ 0.111632] ACPI: Core revision 20080321
> Oct 6 09:15:33 proDFS kernel: [ 0.118484] ACPI: setting ELCR to
> 1000 (from 1c00)
> Oct 6 09:15:33 proDFS kernel: [ 0.120101] weird, boot CPU (#0) not
> listedby the BIOS.
> Oct 6 09:15:33 proDFS kernel: [ 0.120109] SMP motherboard not
> detected.
> Oct 6 09:15:33 proDFS kernel: [ 0.120116] Local APIC not detected.
> Using dummy APIC emulation.
> Oct 6 09:15:33 proDFS kernel: [ 0.120123] SMP disabled
> Oct 6 09:15:33 proDFS kernel: [ 0.120288] Brought up 1 CPUs
> Oct 6 09:15:33 proDFS kernel: [ 0.120296] Total of 1 processors
> activated (1601.95 BogoMIPS).
> Oct 6 09:15:33 proDFS kernel: [ 0.120323] CPU0 attaching sched-domain:
> Oct 6 09:15:33 proDFS kernel: [ 0.120332] domain 0: span 0
> Oct 6 09:15:33 proDFS kernel: [ 0.120339] groups: 0
> Oct 6 09:15:33 proDFS kernel: [ 0.121015] net_namespace: 660 bytes
> Oct 6 09:15:33 proDFS kernel: [ 0.121038] Booting paravirtualized
> kernel on bare hardware
> Oct 6 09:15:33 proDFS kernel: [ 0.121791] NET: Registered protocol
> family 16
> Oct 6 09:15:33 proDFS kernel: [ 0.122481] ACPI: bus type pci
> registered
> Oct 6 09:15:33 proDFS kernel: [ 0.155412] PCI: PCI BIOS revision
> 2.10 entry at 0xfb290, last bus=1
> Oct 6 09:15:33 proDFS kernel: [ 0.155420] PCI: Using configuration
> type 1 for base access
> Oct 6 09:15:33 proDFS kernel: [ 0.155442] Setting up standard PCI
> resources
> Oct 6 09:15:33 proDFS kernel: [ 0.162090] ACPI: EC: Look up EC in DSDT
> Oct 6 09:15:33 proDFS kernel: [ 0.167820] ACPI: Interpreter enabled
> Oct 6 09:15:33 proDFS kernel: [ 0.167833] ACPI: (supports S0 S1 S3
> S4 S5)
> Oct 6 09:15:33 proDFS kernel: [ 0.167880] ACPI: Using PIC for
> interrupt routing
> Oct 6 09:15:33 proDFS kernel: [ 0.176391] ACPI: PCI Root Bridge
> [PCI0] (0000:00)
> Oct 6 09:15:33 proDFS kernel: [ 0.177028] ACPI: PCI Interrupt
> Routing Table [\_SB_.PCI0._PRT]
> Oct 6 09:15:33 proDFS kernel: [ 0.180609] ACPI: PCI Interrupt Link
> [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> Oct 6 09:15:33 proDFS kernel: [ 0.181003] ACPI: PCI Interrupt Link
> [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
> Oct 6 09:15:33 proDFS kernel: [ 0.181335] ACPI: PCI Interrupt Link
> [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> Oct 6 09:15:33 proDFS kernel: [ 0.181728] ACPI: PCI Interrupt Link
> [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
> Oct 6 09:15:33 proDFS kernel: [ 0.182082] Linux Plug and Play
> Support v0.97 (c) Adam Belay
> Oct 6 09:15:33 proDFS kernel: [ 0.182173] pnp: PnP ACPI init
> Oct 6 09:15:33 proDFS kernel: [ 0.182197] ACPI: bus type pnp
> registered
> Oct 6 09:15:33 proDFS kernel: [ 0.189666] pnp: PnP ACPI: found 12
> devices
> Oct 6 09:15:33 proDFS kernel: [ 0.189678] ACPI: ACPI bus type pnp
> unregistered
> Oct 6 09:15:33 proDFS kernel: [ 0.189691] PnPBIOS: Disabled by
> ACPI PNP
> Oct 6 09:15:33 proDFS kernel: [ 0.190476] PCI: Using ACPI for IRQ
> routing
> Oct 6 09:15:33 proDFS kernel: [ 0.191050] system 00:00: iomem
> range 0xc8000-0xcbfff has been reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191062] system 00:00: iomem
> range 0xf0000-0xf7fff could not be reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191071] system 00:00: iomem
> range 0xf8000-0xfbfff could not be reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191080] system 00:00: iomem
> range 0xfc000-0xfffff could not be reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191088] system 00:00: iomem
> range 0xfff0000-0xfffffff could not be reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191097] system 00:00: iomem
> range 0xffff0000-0xffffffff could not be reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191106] system 00:00: iomem
> range 0x0-0x9ffff could not be reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191115] system 00:00: iomem
> range 0x100000-0xffeffff could not be reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191141] system 00:02: ioport
> range 0x3f0-0x3f1 has been reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.191150] system 00:02: ioport
> range 0x4d0-0x4d1 has been reserved
> Oct 6 09:15:33 proDFS kernel: [ 0.222397] PCI: Bridge: 0000:00:01.0
> Oct 6 09:15:33 proDFS kernel: [ 0.222405] IO window: disabled.
> Oct 6 09:15:33 proDFS kernel: [ 0.222413] MEM window: disabled.
> Oct 6 09:15:33 proDFS kernel: [ 0.222420] PREFETCH window: disabled.
> Oct 6 09:15:33 proDFS kernel: [ 0.222447] PCI: Setting latency
> timer of device 0000:00:01.0 to 64
> Oct 6 09:15:33 proDFS kernel: [ 0.222524] NET: Registered protocol
> family 2
> Oct 6 09:15:33 proDFS kernel: [ 0.222789] IP route cache hash
> table entries: 2048 (order: 1, 8192 bytes)
> Oct 6 09:15:33 proDFS kernel: [ 0.223409] TCP established hash
> table entries: 8192 (order: 4, 65536 bytes)
> Oct 6 09:15:33 proDFS kernel: [ 0.223620] TCP bind hash table
> entries: 8192 (order: 4, 65536 bytes)
> Oct 6 09:15:33 proDFS kernel: [ 0.223822] TCP: Hash tables
> configured (established 8192 bind 8192)
> Oct 6 09:15:33 proDFS kernel: [ 0.223829] TCP reno registered
> Oct 6 09:15:33 proDFS kernel: [ 0.224178] NET: Registered protocol
> family 1
> Oct 6 09:15:33 proDFS kernel: [ 0.224512] checking if image is
> initramfs...<7>Switched to high resolution mode on CPU 0
> Oct 6 09:15:33 proDFS kernel: [ 0.926045] it is
> Oct 6 09:15:33 proDFS kernel: [ 1.753943] Freeing initrd memory:
> 6019k freed
> Oct 6 09:15:33 proDFS kernel: [ 1.755708] audit: initializing
> netlink socket (disabled)
> Oct 6 09:15:33 proDFS kernel: [ 1.755754] type=2000
> audit(1254813211.752:1): initialized
> Oct 6 09:15:33 proDFS kernel: [ 1.756164] Total HugeTLB memory
> allocated, 0
> Oct 6 09:15:33 proDFS kernel: [ 1.756398] VFS: Disk quotas dquot_6.5.1
> Oct 6 09:15:33 proDFS kernel: [ 1.756498] Dquot-cache hash table
> entries: 1024 (order 0, 4096 bytes)
> Oct 6 09:15:33 proDFS kernel: [ 1.756619] msgmni has been set to 500
> Oct 6 09:15:33 proDFS kernel: [ 1.757056] Block layer SCSI generic
> (bsg) driver version 0.4 loaded (major 253)
> Oct 6 09:15:33 proDFS kernel: [ 1.757068] io scheduler noop registered
> Oct 6 09:15:33 proDFS kernel: [ 1.757074] io scheduler
> anticipatory registered
> Oct 6 09:15:33 proDFS kernel: [ 1.757079] io scheduler deadline
> registered
> Oct 6 09:15:33 proDFS kernel: [ 1.757118] io scheduler cfq
> registered (default)
> Oct 6 09:15:33 proDFS kernel: [ 1.757151] PCI: VIA PCI bridge
> detected.Disabling DAC.
> Oct 6 09:15:33 proDFS kernel: [ 1.757163] pci 0000:00:07.0:
> Activating ISA DMA hang workarounds
> Oct 6 09:15:33 proDFS kernel: [ 1.757202] pci 0000:00:11.0: Boot
> video device
> Oct 6 09:15:33 proDFS kernel: [ 1.758160] isapnp: Scanning for PnP
> cards...
> Oct 6 09:15:33 proDFS kernel: [ 2.113292] isapnp: No Plug & Play
> device found
> Oct 6 09:15:33 proDFS kernel: [ 2.121661] Serial: 8250/16550
> driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> Oct 6 09:15:33 proDFS kernel: [ 2.121914] serial8250: ttyS0 at I/O
> 0x3f8 (irq = 4) is a 16550A
> Oct 6 09:15:33 proDFS kernel: [ 2.122141] serial8250: ttyS1 at I/O
> 0x2f8 (irq = 3) is a 16550A
> Oct 6 09:15:33 proDFS kernel: [ 2.123071] 00:08: ttyS0 at I/O
> 0x3f8 (irq = 4) is a 16550A
> Oct 6 09:15:33 proDFS kernel: [ 2.123453] 00:09: ttyS1 at I/O
> 0x2f8 (irq = 3) is a 16550A
> Oct 6 09:15:33 proDFS kernel: [ 2.127825] brd: module loaded
> Oct 6 09:15:33 proDFS kernel: [ 2.128173] PNP: PS/2 Controller
> [PNP0303:PS2K] at 0x60,0x64 irq 1
> Oct 6 09:15:33 proDFS kernel: [ 2.128182] PNP: PS/2 appears to
> have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> Oct 6 09:15:33 proDFS kernel: [ 2.128782] serio: i8042 KBD port at
> 0x60,0x64 irq 1
> Oct 6 09:15:33 proDFS kernel: [ 2.129157] mice: PS/2 mouse device
> common for all mice
> Oct 6 09:15:33 proDFS kernel: [ 2.129495] rtc_cmos 00:04: rtc
> core: registered rtc_cmos as rtc0
> Oct 6 09:15:33 proDFS kernel: [ 2.129533] rtc0: alarms up to one
> year, y3k
> Oct 6 09:15:33 proDFS kernel: [ 2.129648] cpuidle: using governor
> ladder
> Oct 6 09:15:33 proDFS kernel: [ 2.129656] cpuidle: using governor menu
> Oct 6 09:15:33 proDFS kernel: [ 2.129672] No iBFT detected.
> Oct 6 09:15:33 proDFS kernel: [ 2.131028] TCP cubic registered
> Oct 6 09:15:33 proDFS kernel: [ 2.131038] NET: Registered protocol
> family 17
> Oct 6 09:15:33 proDFS kernel: [ 2.131056] Using IPI No-Shortcut mode
> Oct 6 09:15:33 proDFS kernel: [ 2.131453] registered taskstats
> version 1
> Oct 6 09:15:33 proDFS kernel: [ 2.131757] rtc_cmos 00:04: setting
> system clock to 2009-10-06 07:13:32 UTC (1254813212)
> Oct 6 09:15:33 proDFS kernel: [ 2.132336] Freeing unused kernel
> memory: 244k freed
> Oct 6 09:15:33 proDFS kernel: [ 2.162707] input: AT Translated Set
> 2 keyboard as /class/input/input0
> Oct 6 09:15:33 proDFS kernel: [ 2.422863] ACPI: CPU0 (power
> states: C1[C1] C2[C2])
> Oct 6 09:15:33 proDFS kernel: [ 2.423007] ACPI: ACPI0007:00 is
> registered as cooling_device0
> Oct 6 09:15:33 proDFS kernel: [ 2.423020] ACPI: Processor [CPU0]
> (supports 2 throttling states)
> Oct 6 09:15:33 proDFS kernel: [ 3.355818] Uniform Multi-Platform
> E-IDE driver
> Oct 6 09:15:33 proDFS kernel: [ 3.355835] ide: Assuming 33MHz
> system bus speed for PIO modes; override with idebus=xx
> Oct 6 09:15:33 proDFS kernel: [ 3.435828] usbcore: registered new
> interface driver usbfs
> Oct 6 09:15:33 proDFS kernel: [ 3.435909] usbcore: registered new
> interface driver hub
> Oct 6 09:15:33 proDFS kernel: [ 3.435997] usbcore: registered new
> device driver usb
> Oct 6 09:15:33 proDFS kernel: [ 3.483150] USB Universal Host
> Controller Interface driver v3.0
> Oct 6 09:15:33 proDFS kernel: [ 3.484362] ACPI: PCI Interrupt Link
> [LNKD] enabled at IRQ 11
> Oct 6 09:15:33 proDFS kernel: [ 3.484371] PCI: setting IRQ 11 as
> level-triggered
> Oct 6 09:15:33 proDFS kernel: [ 3.484380] ACPI: PCI Interrupt
> 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
> Oct 6 09:15:33 proDFS kernel: [ 3.484409] uhci_hcd 0000:00:07.2:
> UHCI Host Controller
> Oct 6 09:15:33 proDFS kernel: [ 3.484639] uhci_hcd 0000:00:07.2:
> new USB bus registered, assigned bus number 1
> Oct 6 09:15:33 proDFS kernel: [ 3.484683] uhci_hcd 0000:00:07.2:
> irq 11, io base 0x0000e400
> Oct 6 09:15:33 proDFS kernel: [ 3.484920] usb usb1: configuration
> #1 chosen from 1 choice
> Oct 6 09:15:33 proDFS kernel: [ 3.485001] hub 1-0:1.0: USB hub found
> Oct 6 09:15:33 proDFS kernel: [ 3.485022] hub 1-0:1.0: 2 ports
> detected
> Oct 6 09:15:33 proDFS kernel: [ 3.588430] usb usb1: New USB device
> found, idVendor=1d6b, idProduct=0001
> Oct 6 09:15:33 proDFS kernel: [ 3.588443] usb usb1: New USB device
> strings: Mfr=3, Product=2, SerialNumber=1
> Oct 6 09:15:33 proDFS kernel: [ 3.588451] usb usb1: Product: UHCI
> Host Controller
> Oct 6 09:15:33 proDFS kernel: [ 3.588457] usb usb1: Manufacturer:
> Linux 2.6.26-2-686 uhci_hcd
> Oct 6 09:15:33 proDFS kernel: [ 3.588464] usb usb1: SerialNumber:
> 0000:00:07.2
> Oct 6 09:15:33 proDFS kernel: [ 3.588939]
> via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
> Oct 6 09:15:33 proDFS kernel: [ 3.589975] ACPI: PCI Interrupt Link
> [LNKB] enabled at IRQ 10
> Oct 6 09:15:33 proDFS kernel: [ 3.589985] PCI: setting IRQ 10 as
> level-triggered
> Oct 6 09:15:33 proDFS kernel: [ 3.589994] ACPI: PCI Interrupt
> 0000:00:0f.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
> Oct 6 09:15:33 proDFS kernel: [ 3.611914] eth0: VIA Rhine at
> 0x1e800, 00:50:ba:06:7c:12, IRQ 10.
> Oct 6 09:15:33 proDFS kernel: [ 3.616013] eth0: MII PHY found at
> address 8, status 0x782d advertising 05e1 Link 45e1.
> Oct 6 09:15:33 proDFS kernel: [ 3.695489] VP_IDE: IDE controller
> (0x1106:0x0571 rev 0x10) at PCI slot 0000:00:07.1
> Oct 6 09:15:33 proDFS kernel: [ 3.695538] VP_IDE: not 100% native
> mode: will probe irqs later
> Oct 6 09:15:33 proDFS kernel: [ 3.695585] VP_IDE: VIA vt82c596b
> (rev 23) IDE UDMA66 controller on pci0000:00:07.1
> Oct 6 09:15:33 proDFS kernel: [ 3.695606] ide0: BM-DMA at
> 0xe000-0xe007
> Oct 6 09:15:33 proDFS kernel: [ 3.695626] ide1: BM-DMA at
> 0xe008-0xe00f
> Oct 6 09:15:33 proDFS kernel: [ 3.695637] Probing IDE interface
> ide0...
> Oct 6 09:15:33 proDFS kernel: [ 4.066627] FDC 0 is a post-1991 82077
> Oct 6 09:15:33 proDFS kernel: [ 4.112208] hda: MAXTOR 6L040J2, ATA
> DISK drive
> Oct 6 09:15:33 proDFS kernel: [ 4.196254] Marking TSC unstable due
> to: TSC halts in idle.
> Oct 6 09:15:33 proDFS kernel: [ 4.784183] hda: host max PIO5
> wanted PIO255(auto-tune) selected PIO4
> Oct 6 09:15:33 proDFS kernel: [ 4.784340] hda: UDMA/66 mode selected
> Oct 6 09:15:33 proDFS kernel: [ 4.784526] Probing IDE interface
> ide1...
> Oct 6 09:15:33 proDFS kernel: [ 5.352177] ide0 at
> 0x1f0-0x1f7,0x3f6 on irq 14
> Oct 6 09:15:33 proDFS kernel: [ 5.352241] ide1 at
> 0x170-0x177,0x376 on irq 15
> Oct 6 09:15:33 proDFS kernel: [ 5.360505] ACPI: PCI Interrupt
> 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
> Oct 6 09:15:33 proDFS kernel: [ 5.360538] 3c59x: Donald Becker and
> others.
> Oct 6 09:15:33 proDFS kernel: [ 5.360552] 0000:00:13.0: 3Com PCI
> 3c905B Cyclone 100baseTx at d0842000.
> Oct 6 09:15:33 proDFS kernel: [ 5.382797] No dock devices found.
> Oct 6 09:15:33 proDFS kernel: [ 5.416640] SCSI subsystem initialized
> Oct 6 09:15:33 proDFS kernel: [ 5.455514] libata version 3.00 loaded.
> Oct 6 09:15:33 proDFS kernel: [ 5.510987] hda: max request size:
> 128KiB
> Oct 6 09:15:33 proDFS kernel: [ 5.512285] hda: Host Protected Area
> detected.
> Oct 6 09:15:33 proDFS kernel: [ 5.512291] current capacity is
> 66055248 sectors (33820 MB)
> Oct 6 09:15:33 proDFS kernel: [ 5.512295] native capacity is
> 78198750 sectors (40037 MB)
> Oct 6 09:15:33 proDFS kernel: [ 5.513184] hda: Host Protected Area
> disabled.
> Oct 6 09:15:33 proDFS kernel: [ 5.513199] hda: 78198750 sectors
> (40037 MB) w/1819KiB Cache, CHS=65535/16/63
> Oct 6 09:15:33 proDFS kernel: [ 5.513380] hda: cache flushes supported
> Oct 6 09:15:33 proDFS kernel: [ 5.513518] hda: hda1 hda2 <<4>hda:
> dma_timer_expiry: dma status == 0x20
> Oct 6 09:15:33 proDFS kernel: [ 25.520047] hda: DMA timeout retry
> Oct 6 09:15:33 proDFS kernel: [ 25.520055] hda: timeout waiting for DMA
> Oct 6 09:15:33 proDFS kernel: [ 26.229362] hda: status timeout:
> status=0xd0 { Busy }
> Oct 6 09:15:33 proDFS kernel: [ 26.229362] ide: failed opcode was:
> unknown
> Oct 6 09:15:33 proDFS kernel: [ 26.229362] hda: drive not ready for
> command
> Oct 6 09:15:33 proDFS kernel: [ 26.229362] Clocksource tsc unstable
> (delta = 4686776108 ns)
> Oct 6 09:15:33 proDFS kernel: [ 30.628030] ide0: reset: success
> Oct 6 09:15:33 proDFS kernel: [ 50.680033] hda: dma_timer_expiry:
> dma status == 0x20
> Oct 6 09:15:33 proDFS kernel: [ 50.680042] hda: DMA timeout retry
> Oct 6 09:15:33 proDFS kernel: [ 50.680047] hda: timeout waiting for DMA
> Oct 6 09:15:33 proDFS kernel: [ 51.389363] hda: status timeout:
> status=0xd0 { Busy }
> Oct 6 09:15:33 proDFS kernel: [ 51.389363] ide: failed opcode was:
> unknown
> Oct 6 09:15:33 proDFS kernel: [ 51.389363] hda: drive not ready for
> command
> Oct 6 09:15:33 proDFS kernel: [ 55.800031] ide0: reset: success
> Oct 6 09:15:33 proDFS kernel: [ 55.854826] hda5 >
> Oct 6 09:15:33 proDFS kernel: [ 75.904041] hda: dma_timer_expiry:
> dma status == 0x20
> Oct 6 09:15:33 proDFS kernel: [ 75.904056] hda: DMA timeout retry
> Oct 6 09:15:33 proDFS kernel: [ 75.904061] hda: timeout waiting for DMA
> Oct 6 09:15:33 proDFS kernel: [ 76.613363] hda: status timeout:
> status=0xd0 { Busy }
> Oct 6 09:15:33 proDFS kernel: [ 76.613363] ide: failed opcode was:
> unknown
> Oct 6 09:15:33 proDFS kernel: [ 76.613363] hda: drive not ready for
> command
> Oct 6 09:15:33 proDFS kernel: [ 80.972031] ide0: reset: success
> Oct 6 09:15:33 proDFS kernel: [ 101.020032] hda: dma_timer_expiry:
> dma status == 0x20
> Oct 6 09:15:33 proDFS kernel: [ 101.020042] hda: DMA timeout retry
> Oct 6 09:15:33 proDFS kernel: [ 101.020047] hda: timeout waiting for DMA
> Oct 6 09:15:33 proDFS kernel: [ 101.729363] hda: status timeout:
> status=0xd0 { Busy }
> Oct 6 09:15:33 proDFS kernel: [ 101.729363] ide: failed opcode was:
> unknown
> Oct 6 09:15:33 proDFS kernel: [ 101.729363] hda: drive not ready for
> command
> Oct 6 09:15:33 proDFS kernel: [ 106.092030] ide0: reset: success
> Oct 6 09:15:33 proDFS kernel: [ 106.597609] PM: Starting manual
> resume from disk
> Oct 6 09:15:33 proDFS kernel: [ 106.695774] kjournald starting.
> Commit interval 5 seconds
> Oct 6 09:15:33 proDFS kernel: [ 106.695774] EXT3-fs: mounted
> filesystem with ordered data mode.
> Oct 6 09:15:33 proDFS kernel: [ 109.749558] udevd version 125 started
> Oct 6 09:15:33 proDFS kernel: [ 112.440393] input: PC Speaker as
> /class/input/input1
> Oct 6 09:15:33 proDFS kernel: [ 112.632049] pci_hotplug: PCI Hot
> Plug PCI Core version: 0.5
> Oct 6 09:15:33 proDFS kernel: [ 112.718978] shpchp: Standard Hot
> Plug PCI Controller Driver version: 0.4
> Oct 6 09:15:33 proDFS kernel: [ 112.931515] Linux agpgart interface
> v0.103
> Oct 6 09:15:33 proDFS kernel: [ 113.030202] agpgart: Detected VIA
> Apollo Pro 133 chipset
> Oct 6 09:15:33 proDFS kernel: [ 113.034601] agpgart: AGP aperture is
> 64M @ 0xd0000000
> Oct 6 09:15:33 proDFS kernel: [ 114.120846] Error: Driver 'pcspkr'
> is already registered, aborting...
> Oct 6 09:15:33 proDFS kernel: [ 114.520916] input: Power Button (FF)
> as /class/input/input2
> Oct 6 09:15:33 proDFS kernel: [ 114.550335] ACPI: Power Button (FF)
> [PWRF]
> Oct 6 09:15:33 proDFS kernel: [ 114.550532] input: Power Button (CM)
> as /class/input/input3
> Oct 6 09:15:33 proDFS kernel: [ 114.579005] ACPI: Power Button (CM)
> [PWRB]
> Oct 6 09:15:33 proDFS kernel: [ 115.510856] parport_pc 00:0a:
> reported by Plug and Play ACPI
> Oct 6 09:15:33 proDFS kernel: [ 115.511003] parport0: PC-style at
> 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
> Oct 6 09:15:33 proDFS kernel: [ 117.595208] Adding 361420k swap on
> /dev/hda5. Priority:-1 extents:1 across:361420k
> Oct 6 09:15:33 proDFS kernel: [ 118.326246] EXT3 FS on hda1,
> internal journal
> Oct 6 09:15:33 proDFS kernel: [ 118.832956] loop: module loaded
> Oct 6 09:15:33 proDFS kernel: [ 120.023212] eth1: setting half-duplex.
> Oct 6 09:15:33 proDFS kernel: [ 120.918361] eth0: link up, 100Mbps,
> full-duplex, lpa 0x45E1
> Oct 6 09:15:33 proDFS kernel: [ 121.548714] NET: Registered protocol
> family 10
> Oct 6 09:15:33 proDFS kernel: [ 121.550052] lo: Disabled Privacy
> Extensions
> Oct 6 09:15:33 proDFS kernel: [ 121.552342] ADDRCONF(NETDEV_UP):
> eth1: link is not ready
> Oct 6 09:15:42 proDFS kernel: [ 131.740067] eth0: no IPv6 routers
> present
Thank you very much!
Piviul
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
