Package: linux-image-2.6.30-1-686
Version: 2.6.30-6
Severity: normal
The server working for a years without problems, one moment become unavailable
on network. Investigation from local console show the system is working
properly, except network. Any host is unavailable, but Ethernet interface is up
and respond to local ping. More over, pull out and push in back the Ethernet
cord end on the switch cause "Link Down" and Link UP" respectively messages from
the system. The hosts on the neighbor ports on the switch are seen on the
network. After reboot the problem gone away. I have found the reason of this
situation in the kernel.log: the message duplicated on console appeared at the
moment when server become unavailable:
Aug 29 00:34:59 bis kernel: [881197.000009] ------------[ cut here ]------------
Aug 29 00:35:00 bis kernel: [881197.000041] WARNING: at
/build/buildd-linux-2.6_2.6.30-6-i386-7SwQ62/linux-2.6-2.6.30/debian/build/source_i386_none/net/sched/sch_generic.c:226
dev_watchdog+0xa8/0x135()
Aug 29 00:35:00 bis kernel: [881197.000080] Hardware name:
Aug 29 00:35:00 bis kernel: [881197.000093] NETDEV WATCHDOG: eth0 (skge):
transmit timed out
Aug 29 00:35:00 bis kernel: [881197.000110] Modules linked in: battery
binfmt_misc nls_utf8 cifs nls_base xt_owner iptable_nat nf_nat
nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables
w83627hf hwmon_vid eeprom psmouse ide_generic ide_cd_mod cdrom i2c_nforce2
snd_pcm i2c_core snd_timer shpchp pci_hotplug snd soundcore snd_page_alloc
button pcspkr evdev processor ext3 jbd mbcache dm_mirror dm_region_hash dm_log
dm_snapshot dm_mod ide_gd_mod ide_pci_generic ata_generic libata scsi_mod
amd74xx skge ide_core nvidia_agp agpgart floppy thermal fan thermal_sys [last
unloaded: scsi_wait_scan]
Aug 29 00:35:00 bis kernel: [881197.000365] Pid: 0, comm: swapper Not tainted
2.6.30-1-686 #1
Aug 29 00:35:00 bis kernel: [881197.000383] Call Trace:
Aug 29 00:35:00 bis kernel: [881197.000401] [<c0127000>] ?
warn_slowpath_common+0x5e/0x8a
Aug 29 00:35:00 bis kernel: [881197.000420] [<c029ee0c>] ?
dev_watchdog+0x0/0x135
Aug 29 00:35:00 bis kernel: [881197.000437] [<c012705e>] ?
warn_slowpath_fmt+0x26/0x2a
Aug 29 00:35:00 bis kernel: [881197.000454] [<c029eeb4>] ?
dev_watchdog+0xa8/0x135
Aug 29 00:35:00 bis kernel: [881197.000476] [<c0138c0c>] ?
hrtimer_forward+0x10c/0x124
Aug 29 00:35:00 bis kernel: [881197.000493] [<c0124998>] ?
scheduler_tick+0x85/0x1a6
Aug 29 00:35:00 bis kernel: [881197.000514] [<c013d4bc>] ?
getnstimeofday+0x4d/0xca
Aug 29 00:35:00 bis kernel: [881197.000533] [<c010fd41>] ?
lapic_next_event+0x13/0x16
Aug 29 00:35:00 bis kernel: [881197.000551] [<c013f85d>] ?
clockevents_program_event+0xbb/0xc9
Aug 29 00:35:00 bis kernel: [881197.000571] [<c012e3b7>] ?
run_timer_softirq+0x13d/0x19d
Aug 29 00:35:00 bis kernel: [881197.000588] [<c029ee0c>] ?
dev_watchdog+0x0/0x135
Aug 29 00:35:00 bis kernel: [881197.000609] [<c012b0ff>] ?
__do_softirq+0x8e/0x135
Aug 29 00:35:00 bis kernel: [881197.000626] [<c012b1d4>] ? do_softirq+0x2e/0x38
Aug 29 00:35:00 bis kernel: [881197.000643] [<c012b2b7>] ? irq_exit+0x26/0x53
Aug 29 00:35:00 bis kernel: [881197.000660] [<c01105ca>] ?
smp_apic_timer_interrupt+0x6c/0x76
Aug 29 00:35:00 bis kernel: [881197.000680] [<c0103966>] ?
apic_timer_interrupt+0x2a/0x30
Aug 29 00:35:00 bis kernel: [881197.000700] [<c0116420>] ?
native_safe_halt+0x2/0x3
Aug 29 00:35:00 bis kernel: [881197.000718] [<c010895e>] ?
default_idle+0x41/0x6a
Aug 29 00:35:00 bis kernel: [881197.000735] [<c0102399>] ? cpu_idle+0x46/0x61
Aug 29 00:35:00 bis kernel: [881197.000755] [<c044676d>] ?
start_kernel+0x2c2/0x2c5
Aug 29 00:35:00 bis kernel: [881197.000771] ---[ end trace 783bd83e9c05340d ]---
-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-6) (wa...@debian.org) (gcc version
4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 19:11:58 UTC 2009
** Command line:
root=/dev/hda1 ro
** Not tainted
** Kernel log:
[ 0.916272] NET: Registered protocol family 10
[ 0.916892] lo: Disabled Privacy Extensions
[ 0.917374] Mobile IPv6
[ 0.917427] NET: Registered protocol family 17
[ 0.917487] Using IPI No-Shortcut mode
[ 0.917713] registered taskstats version 1
[ 0.917898] rtc_cmos 00:06: setting system clock to 2009-08-31 10:28:25 UTC
(1251714505)
[ 0.918024] Freeing unused kernel memory: 320k freed
[ 0.918477] Write protecting the kernel text: 2176k
[ 0.918550] Write protecting the kernel read-only data: 784k
[ 0.934411] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.037247] fan PNP0C0B:00: registered as cooling_device0
[ 1.037321] ACPI: Fan [FAN] (on)
[ 1.041688] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.041755] ACPI: Thermal Zone [THRM] (22 C)
[ 1.087360] Floppy drive(s): fd0 is 1.44M
[ 1.107892] FDC 0 is a post-1991 82077
[ 1.126652] Linux agpgart interface v0.103
[ 1.128973] agpgart: Detected NVIDIA nForce2 chipset
[ 1.133187] agpgart-nvidia 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 1.154710] Uniform Multi-Platform E-IDE driver
[ 1.176289] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.176360] skge 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level,
high) -> IRQ 16
[ 1.176474] skge 1.13 addr 0xe7000000 irq 16 chip Yukon rev 1
[ 1.177406] skge eth0: addr 00:11:95:ed:11:17
[ 1.214942] amd74xx 0000:00:09.0: UDMA133 controller
[ 1.215006] amd74xx 0000:00:09.0: IDE controller (0x10de:0x0065 rev 0xa2)
[ 1.215096] amd74xx 0000:00:09.0: BIOS didn't set cable bits correctly.
Enabling workaround.
[ 1.215160] amd74xx 0000:00:09.0: BIOS didn't set cable bits correctly.
Enabling workaround.
[ 1.215225] amd74xx 0000:00:09.0: not 100% native mode: will probe irqs later
[ 1.215286] ide0: BM-DMA at 0xf000-0xf007
[ 1.215347] ide1: BM-DMA at 0xf008-0xf00f
[ 1.215402] Probing IDE interface ide0...
[ 1.504136] hda: IC35L040AVVN07-0, ATA DISK drive
[ 2.176060] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.176359] hda: UDMA/100 mode selected
[ 2.176699] Probing IDE interface ide1...
[ 2.464133] hdc: HDT722525DLAT80, ATA DISK drive
[ 2.800007] hdd: WDC WD3200JB-00KFA0, ATA DISK drive
[ 2.800087] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.800230] hdc: UDMA/133 mode selected
[ 2.800424] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.800509] hdd: UDMA/100 mode selected
[ 2.800657] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.817186] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.863535] SCSI subsystem initialized
[ 2.889903] libata version 3.00 loaded.
[ 2.900763] ide-gd driver 1.18
[ 2.900859] hda: max request size: 128KiB
[ 2.902993] hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63
[ 2.903479] hda: cache flushes supported
[ 2.903602] hda: hda1 hda2 < hda5 >
[ 2.926335] hdc: max request size: 512KiB
[ 2.926535] hdc: 488397168 sectors (250059 MB) w/7674KiB Cache,
CHS=30401/255/63
[ 2.926837] hdc: cache flushes supported
[ 2.926927] hdc: hdc1
[ 2.935269] hdd: max request size: 512KiB
[ 2.935419] hdd: 625142448 sectors (320072 MB) w/8192KiB Cache,
CHS=38913/255/63
[ 2.935643] hdd: cache flushes supported
[ 2.935732] hdd: hdd1
[ 3.304711] device-mapper: uevent: version 1.0.3
[ 3.305803] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-de...@redhat.com
[ 3.362262] PM: Starting manual resume from disk
[ 3.451348] kjournald starting. Commit interval 5 seconds
[ 3.451419] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.634784] udev: starting version 141
[ 5.916211] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.916287] ACPI: Power Button [PWRF]
[ 5.916421] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.916486] ACPI: Power Button [PWRB]
[ 5.944140] processor ACPI_CPU:00: registered as cooling_device1
[ 6.428983] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.509101] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.717395] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 6.717474] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 6.720373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.926787] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.858597] Adding 1502036k swap on /dev/hda5. Priority:-1 extents:1
across:1502036k
[ 8.108044] EXT3 FS on hda1, internal journal
[ 8.461523] ide-cd driver 5.00
[ 8.475251] ide_generic: please use "probe_mask=0x3f" module parameter for
probing all legacy ISA IDE ports
[ 8.785466] w83627hf: Found W83627HF chip at 0x290
[ 10.024643] kjournald starting. Commit interval 5 seconds
[ 10.025034] EXT3 FS on hdd1, internal journal
[ 10.025131] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.102437] kjournald starting. Commit interval 5 seconds
[ 10.102704] EXT3 FS on hdc1, internal journal
[ 10.102801] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.197674] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.316649] nf_conntrack version 0.5.0 (8191 buckets, 32764 max)
[ 11.316867] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[ 11.316930] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module
option or
[ 11.316992] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 12.108157] skge eth0: enabling interface
[ 12.111634] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.757201] skge eth0: Link is up at 1000 Mbps, full duplex, flow control
both
[ 14.757328] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.159022] CIFS: Unknown mount option errors
[ 25.324008] eth0: no IPv6 routers present
[ 65.950491] warning: `jsvc' uses 32-bit capabilities (legacy support in use)
** Loaded modules:
Module Size Used by
binfmt_misc 7120 1
nls_utf8 1488 1
cifs 250028 2
nls_base 6416 2 nls_utf8,cifs
xt_owner 2172 2
iptable_nat 5052 0
nf_nat 16192 1 iptable_nat
nf_conntrack_ipv4 11928 3 iptable_nat,nf_nat
nf_conntrack 57924 3 iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1664 1 nf_conntrack_ipv4
iptable_filter 2956 1
ip_tables 10188 2 iptable_nat,iptable_filter
x_tables 14108 3 xt_owner,iptable_nat,ip_tables
w83627hf 21128 0
hwmon_vid 2480 1 w83627hf
eeprom 4964 0
psmouse 37528 0
ide_generic 1824 0 [permanent]
ide_cd_mod 24484 0
cdrom 30316 1 ide_cd_mod
snd_pcm 62420 0
snd_timer 17436 1 snd_pcm
shpchp 26648 0
i2c_nforce2 6448 0
snd 49060 2 snd_pcm,snd_timer
pci_hotplug 24400 1 shpchp
soundcore 6184 1 snd
pcspkr 2104 0
i2c_core 20844 2 eeprom,i2c_nforce2
snd_page_alloc 8180 1 snd_pcm
evdev 8028 6
processor 34504 0
button 5060 0
ext3 107172 3
jbd 41036 1 ext3
mbcache 6924 1 ext3
dm_mirror 12580 0
dm_region_hash 10668 1 dm_mirror
dm_log 8464 2 dm_mirror,dm_region_hash
dm_snapshot 21604 0
dm_mod 49992 3 dm_mirror,dm_log,dm_snapshot
ide_gd_mod 19852 7
ide_pci_generic 3632 0
ata_generic 4340 0
libata 150904 1 ata_generic
scsi_mod 131800 1 libata
amd74xx 5428 7
skge 33896 0
ide_core 88100 5
ide_generic,ide_cd_mod,ide_gd_mod,ide_pci_generic,amd74xx
nvidia_agp 5860 1
agpgart 30836 1 nvidia_agp
floppy 46220 0
thermal 12580 0
fan 4044 0
thermal_sys 13140 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: nVidia Corporation nForce2 IGP2 [10de:01e0] (rev a2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: agpgart-nvidia
00:00.1 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 1
[10de:01eb] (rev a2)
Subsystem: EPoX Computer Co., Ltd. Device [1695:1000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 4
[10de:01ee] (rev a2)
Subsystem: EPoX Computer Co., Ltd. Device [1695:1000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 3
[10de:01ed] (rev a2)
Subsystem: EPoX Computer Co., Ltd. Device [1695:1000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 2
[10de:01ec] (rev a2)
Subsystem: EPoX Computer Co., Ltd. Device [1695:1000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.5 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 5
[10de:01ef] (rev a2)
Subsystem: EPoX Computer Co., Ltd. Device [1695:1000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:01.0 ISA bridge [0601]: nVidia Corporation nForce2 ISA Bridge [10de:0060]
(rev a3)
Subsystem: EPoX Computer Co., Ltd. Device [1695:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.1 SMBus [0c05]: nVidia Corporation nForce2 SMBus (MCP) [10de:0064] (rev
a2)
Subsystem: EPoX Computer Co., Ltd. Device [1695:1000]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at ec00 [size=32]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:08.0 PCI bridge [0604]: nVidia Corporation nForce2 External PCI Bridge
[10de:006c] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e6000000-e7ffffff
Prefetchable memory behind bridge: 30000000-300fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:0065] (rev
a2) (prog-if 8a [Master SecP PriP])
Subsystem: EPoX Computer Co., Ltd. Device [1695:1000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
00:1e.0 PCI bridge [0604]: nVidia Corporation nForce2 AGP [10de:01e8] (rev a2)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e2000000-e3ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
01:08.0 Ethernet controller [0200]: D-Link System Inc Gigabit Ethernet Adapter
[1186:4c00] (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter
[1186:4c00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d000 [size=256]
[virtual] Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
02:00.0 VGA compatible controller [0300]: nVidia Corporation NV5 [RIVA
TNT2/TNT2 Pro] [10de:0028] (rev 15) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation RIVA TNT2 Pro [10de:0005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M]
[virtual] Expansion ROM at e5000000 [disabled] [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-686 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.10-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-1-686 recommends:
ii libc6-i686 2.9-25 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-1-686 suggests:
ii grub 0.97-56 GRand Unified Bootloader (dummy pa
ii grub-legacy [grub] 0.97-56 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686:
linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false
linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686:
linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true
--
*********************************
**** Vladimir Stavrinov ******
******* v...@inist.ru *********
*********************************
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
