Package: linux-image-2.6.26-2-686 Version: 2.6.26-17lenny2 Severity: normal
Upgraded from Etch to Lenny, pretty much only official repositories apart from multimedia, no other funny business. Software RAID5. Installed 2.6.26-1-686 at first, then noticed -2-686 was out. Booted -2 about 10 times, then all of a sudden it wouldn't boot anymore (no hardware or system related software change). Point of failure see below. Reset a few times, then attempted to boot -1-686 which worked. Stuck to that for the moment. Today -1-686 doesn't boot anymore. Tried -2-686 for laughs - boots. Assumption: unhandled hardware condition at boot time. Screenshot can be seen here: http://www.vaultofsages.de/~dexterf/pub/boot.jpg (Last line is about initrd) -- Package-specific info: ** Version: Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14 01:27:18 UTC 2009 ** Command line: root=/dev/hda6 ro edd=off ** Not tainted ** Kernel log: [ 36.539885] agpgart: Detected AGP bridge 0 [ 36.539942] agpgart: Setting up Nforce3 AGP. [ 36.539977] agpgart: aperture base > 4G [ 36.612256] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 36.612312] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040 [ 36.679754] input: Power Button (FF) as /class/input/input2 [ 36.704117] ACPI: Power Button (FF) [PWRF] [ 36.704240] input: Power Button (CM) as /class/input/input3 [ 36.732061] ACPI: Power Button (CM) [PWRB] [ 37.483945] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.492680] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.711563] input: PC Speaker as /class/input/input4 [ 38.095167] parport_pc 00:06: reported by Plug and Play ACPI [ 38.095229] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 38.294217] ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 65.987068] tmpfs: No value for mount option 'default' [ 66.504962] Adding 996020k swap on /dev/hda2. Priority:-1 extents:1 across:996020k [ 66.808988] EXT3 FS on hda6, internal journal [ 67.086716] loop: module loaded [ 67.316018] md: md0 stopped. [ 67.419152] md: bind<sdc1> [ 67.419356] md: bind<sda1> [ 67.419564] md: bind<sdd1> [ 67.419772] md: bind<sdb1> [ 67.419976] md: bind<sde1> [ 67.502607] xor: automatically using best checksumming function: pIII_sse [ 67.520003] pIII_sse : 6994.000 MB/sec [ 67.520037] xor: using function: pIII_sse (6994.000 MB/sec) [ 67.523611] async_tx: api initialized (async) [ 67.604017] raid6: int32x1 882 MB/s [ 67.672019] raid6: int32x2 970 MB/s [ 67.740034] raid6: int32x4 799 MB/s [ 67.808024] raid6: int32x8 452 MB/s [ 67.876014] raid6: mmxx1 1852 MB/s [ 67.944015] raid6: mmxx2 3232 MB/s [ 68.012010] raid6: sse1x1 1608 MB/s [ 68.080023] raid6: sse1x2 2655 MB/s [ 68.148007] raid6: sse2x1 2720 MB/s [ 68.216016] raid6: sse2x2 3755 MB/s [ 68.216049] raid6: using algorithm sse2x2 (3755 MB/s) [ 68.216084] md: raid6 personality registered for level 6 [ 68.216118] md: raid5 personality registered for level 5 [ 68.216152] md: raid4 personality registered for level 4 [ 68.217406] raid5: device sde1 operational as raid disk 0 [ 68.217446] raid5: device sdb1 operational as raid disk 4 [ 68.217481] raid5: device sdd1 operational as raid disk 3 [ 68.217515] raid5: device sda1 operational as raid disk 2 [ 68.217550] raid5: device sdc1 operational as raid disk 1 [ 68.218012] raid5: allocated 5252kB for md0 [ 68.218046] raid5: raid level 5 set md0 active with 5 out of 5 devices, algorithm 2 [ 68.218089] RAID5 conf printout: [ 68.218121] --- rd:5 wd:5 [ 68.218154] disk 0, o:1, dev:sde1 [ 68.218186] disk 1, o:1, dev:sdc1 [ 68.218219] disk 2, o:1, dev:sda1 [ 68.218252] disk 3, o:1, dev:sdd1 [ 68.218285] disk 4, o:1, dev:sdb1 [ 69.124407] fuse init (API version 7.9) [ 69.167279] tmpfs: No value for mount option 'default' [ 69.239618] kjournald starting. Commit interval 5 seconds [ 69.239618] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 69.239618] EXT3 FS on hda1, internal journal [ 69.239618] EXT3-fs: mounted filesystem with ordered data mode. [ 69.254051] kjournald starting. Commit interval 5 seconds [ 69.254051] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 69.254051] EXT3 FS on hda5, internal journal [ 69.254051] EXT3-fs: mounted filesystem with ordered data mode. [ 69.273742] kjournald starting. Commit interval 5 seconds [ 69.273742] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 69.273742] EXT3 FS on hda7, internal journal [ 69.273742] EXT3-fs: mounted filesystem with ordered data mode. [ 69.304204] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 69.305726] SGI XFS Quota Management subsystem [ 69.306826] Filesystem "dm-3": Disabling barriers, not supported by the underlying device [ 69.307064] XFS mounting filesystem dm-3 [ 69.492588] Ending clean XFS mount for filesystem: dm-3 [ 69.492588] Filesystem "dm-0": Disabling barriers, not supported by the underlying device [ 69.492588] XFS mounting filesystem dm-0 [ 69.804030] Ending clean XFS mount for filesystem: dm-0 [ 69.804030] Filesystem "dm-1": Disabling barriers, not supported by the underlying device [ 69.804030] XFS mounting filesystem dm-1 [ 70.207176] Ending clean XFS mount for filesystem: dm-1 [ 71.367466] RPC: Registered udp transport module. [ 71.367513] RPC: Registered tcp transport module. [ 71.576725] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 71.601004] r8169: eth1: link up [ 73.407449] NET: Registered protocol family 10 [ 73.407999] lo: Disabled Privacy Extensions [ 83.549792] lp0: using parport0 (interrupt-driven). [ 83.572337] ppdev: user-space parallel port driver [ 83.644006] eth1: no IPv6 routers present [ 92.231636] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 93.428535] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 93.444206] NFSD: starting 90-second grace period [ 96.235342] [drm] Initialized drm 1.1.0 20060810 [ 96.244104] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 16 [ 96.244116] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 16 (level, low) -> IRQ 16 [ 96.244182] [drm] Initialized mga 3.2.1 20051102 on minor 0 [ 96.246014] [drm:mga_do_agp_dma_bootstrap] *ERROR* Unable to acquire AGP: -19 [ 96.256030] [drm] Initialized card for PCI DMA. ** Loaded modules: Module Size Used by mga 54784 2 drm 65192 3 mga ppdev 6500 0 lp 8164 0 ipv6 235364 26 nfsd 186672 17 auth_rpcgss 33952 1 nfsd exportfs 3904 1 nfsd nfs 214024 0 lockd 54568 2 nfsd,nfs nfs_acl 2912 2 nfsd,nfs sunrpc 162528 13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl xfs 457976 3 fuse 42908 1 raid456 117264 1 async_xor 3520 1 raid456 async_memcpy 2304 1 raid456 async_tx 6316 3 raid456,async_xor,async_memcpy xor 14696 2 raid456,async_xor md_mod 67068 2 raid456 sbp2 18572 0 loop 12748 0 snd_mpu401 6152 0 snd_cmipci 29024 2 snd_cs4232 11380 0 gameport 10700 1 snd_cmipci snd_cs4231_lib 20512 1 snd_cs4232 snd_opl3_lib 9344 2 snd_cmipci,snd_cs4232 snd_pcm_oss 32832 0 snd_mixer_oss 12320 1 snd_pcm_oss snd_hwdep 6212 1 snd_opl3_lib snd_pcm 62596 3 snd_cmipci,snd_cs4231_lib,snd_pcm_oss parport_pc 22500 1 parport 30988 3 ppdev,lp,parport_pc snd_seq_dummy 2660 0 snd_page_alloc 7816 2 snd_cs4231_lib,snd_pcm snd_mpu401_uart 6368 3 snd_mpu401,snd_cmipci,snd_cs4232 snd_seq_oss 24992 0 snd_seq_midi 5728 0 snd_rawmidi 18528 2 snd_mpu401_uart,snd_seq_midi snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 17800 4 snd_cs4231_lib,snd_opl3_lib,snd_pcm,snd_seq snd_seq_device 6380 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 45604 19 snd_mpu401,snd_cmipci,snd_cs4232,snd_cs4231_lib,snd_opl3_lib,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 6368 1 snd pcspkr 2432 0 k8temp 4064 0 shpchp 25528 0 pci_hotplug 23460 1 shpchp button 6096 0 i2c_nforce2 5536 0 i2c_core 19828 1 i2c_nforce2 amd64_agp 8772 0 agpgart 28776 2 drm,amd64_agp evdev 8000 3 ext3 105512 4 jbd 39444 1 ext3 mbcache 7108 1 ext3 dm_mirror 15104 0 dm_log 8484 1 dm_mirror dm_snapshot 14340 0 dm_mod 46184 11 dm_mirror,dm_log,dm_snapshot ide_cd_mod 27652 0 cdrom 30176 1 ide_cd_mod ide_disk 10496 6 sd_mod 22200 10 usbhid 35904 0 hid 33184 1 usbhid ff_memless 4392 1 usbhid ide_pci_generic 3908 0 [permanent] amd74xx 7720 0 [permanent] ide_core 96136 4 ide_cd_mod,ide_disk,ide_pci_generic,amd74xx floppy 47748 0 sata_sil 7176 8 ohci1394 24944 0 ieee1394 75800 2 sbp2,ohci1394 r8169 23684 0 sata_nv 19240 2 ata_generic 4676 0 libata 140416 3 sata_sil,sata_nv,ata_generic scsi_mod 129324 3 sbp2,sd_mod,libata dock 8304 1 libata forcedeth 45072 0 ehci_hcd 28396 0 ohci_hcd 18500 0 usbcore 118224 4 usbhid,ehci_hcd,ohci_hcd thermal 15228 0 processor 32544 1 thermal fan 4164 0 thermal_sys 10856 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: nVidia Corporation nForce3 250Gb Host Bridge [10de:00e1] (rev a1) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel modules: amd64-agp 00:01.0 ISA bridge [0601]: nVidia Corporation nForce3 250Gb LPC Bridge [10de:00e0] (rev a2) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation nForce 250Gb PCI System Management [10de:00e4] (rev a1) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 5080 [size=32] Region 4: I/O ports at 5000 [size=64] Region 5: I/O ports at 5040 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:02.0 USB Controller [0c03]: nVidia Corporation CK8S USB Controller [10de:00e7] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:02.1 USB Controller [0c03]: nVidia Corporation CK8S USB Controller [10de:00e7] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:02.2 USB Controller [0c03]: nVidia Corporation nForce3 EHCI USB 2.0 Controller [10de:00e8] (rev a2) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 20 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:05.0 Bridge [0680]: nVidia Corporation CK8S Ethernet Controller [10de:00df] (rev a2) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:80a7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ec00 [size=8] Capabilities: <access denied> Kernel driver in use: forcedeth Kernel modules: forcedeth 00:08.0 IDE interface [0101]: nVidia Corporation CK8S Parallel ATA Controller (v2.5) [10de:00e5] (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: AMD_IDE Kernel modules: amd74xx 00:0a.0 IDE interface [0101]: nVidia Corporation nForce3 Serial ATA Controller [10de:00e3] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: I/O ports at d000 [size=128] Capabilities: <access denied> Kernel driver in use: sata_nv Kernel modules: sata_nv 00:0b.0 PCI bridge [0604]: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge [10de:00e2] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=10 Memory behind bridge: fd800000-fe8fffff Prefetchable memory behind bridge: f1700000-f56fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:0e.0 PCI bridge [0604]: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge [10de:00ed] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=128 I/O behind bridge: 0000b000-0000cfff Memory behind bridge: fe900000-feafffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp Kernel modules: k8temp 01:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G400/G450 [102b:0525] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb [102b:2179] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f2000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at fe8fc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at fe8e0000 [disabled] [size=64K] Capabilities: <access denied> Kernel modules: matrox_w1, matroxfb_base 02:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at c800 [size=256] Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 02:0a.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10) Subsystem: TERRATEC Electronic GmbH Aureon 5.1 [153b:1144] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at c400 [size=256] Capabilities: <access denied> Kernel driver in use: C-Media PCI Kernel modules: snd-cmipci 02:0b.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard [1043:808a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at cc00 [size=128] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: ohci1394 02:0c.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8136] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at bc00 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b400 [size=4] Region 4: I/O ports at b000 [size=16] Region 5: Memory at feafec00 (32-bit, non-prefetchable) [size=1K] Expansion ROM at fe980000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: sata_sil Kernel modules: sata_sil -- System Information: Debian Release: 5.0.2 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-2-686 recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-2-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/kimage-is-a-directory: linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
