Package: linux-image-2.6.30-1-686
Version: 2.6.30-5
Severity: normal
from dmesg, it shows:
radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
my laptop's video card is ATI Mobility Radeon X300
when my kernel is 2.6.26, the radeon dri is fine and direct rendering is
available.However, I upgraded the kernel several days ago, and the error
message showed as above when booting and from X.Org.log, the rendering is
disabled.
I used "locate radeon" to search that bin file and can not find it.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-5) (m...@debian.org) (gcc version
4.3.3 (Debian 4.3.3-15) ) #1 SMP Mon Aug 3 16:18:30 UTC 2009
** Command line:
root=/dev/sda1 ro quiet
** Not tainted
** Kernel log:
[ 4.602455] Marking TSC unstable due to TSC halts in idle
[ 4.602534] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 4.602565] processor ACPI_CPU:00: registered as cooling_device0
[ 4.602569] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 4.696419] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 4.696968] ACPI: Lid Switch [LID]
[ 4.697028] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.697036] ACPI: Power Button [PBTN]
[ 4.697088] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 4.697092] ACPI: Sleep Button [SBTN]
[ 4.776167] lib80211: common routines for IEEE802.11 drivers
[ 4.776171] lib80211_crypt: registered algorithm 'NULL'
[ 4.884553] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.996414] ACPI: Battery Slot [BAT0] (battery present)
[ 5.015243] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 5.119388] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0188]
[ 5.124022] Clocksource tsc unstable (delta = -324053240 ns)
[ 5.195532] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
[ 5.213387] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input7
[ 5.243860] intel_rng: FWH not detected
[ 5.245148] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 5.245153] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[ 5.245157] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03)
from #04 to #07
[ 5.245165] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O
window: 0x2000 - 0x2fff
[ 5.245169] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:
clean.
[ 5.245381] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory
window: 0xdfc00000 - 0xdfcfffff
[ 5.245385] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory
window: 0x88000000 - 0x8bffffff
[ 5.642453] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
clean.
[ 5.644214] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
clean.
[ 5.644931] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
[ 5.645540] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
[ 5.646299] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
[ 5.707893] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 5.707896] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketr...@linux.intel.com>
[ 5.775268] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
1.2.2kmprq
[ 5.775272] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 5.775336] ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.776241] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 5.776286] ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw
[ 5.938305] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 5.938341] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 6.098958] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a
channels)
[ 6.764035] intel8x0_measure_ac97_clock: measured 55307 usecs (2665 samples)
[ 6.764039] intel8x0: clocking to 48000
[ 6.764683] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 6.764700] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
[ 6.868056] MC'97 1 converters and GPIO not ready (0xff00)
[ 8.598736] Adding 1967888k swap on /dev/sda6. Priority:-1 extents:1
across:1967888k
[ 9.598780] loop: module loaded
[ 9.844679] REISERFS (device sda5): found reiserfs format "3.6" with
standard journal
[ 9.844728] REISERFS (device sda5): using ordered data mode
[ 9.845014] REISERFS (device sda5): journal params: device sda5, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 9.845363] REISERFS (device sda5): checking transaction log (sda5)
[ 9.942285] REISERFS (device sda5): Using r5 hash to sort names
[ 11.512976] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.613224] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 12.613231] vboxdrv: Successfully done.
[ 12.613236] vboxdrv: Found 1 processor cores.
[ 12.613386] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 12.613392] vboxdrv: Successfully loaded version 3.0.4 (interface
0x000e0000).
[ 14.816199] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 14.816207] b44: eth0: Flow control is off for TX and off for RX.
[ 14.816734] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.301884] [drm] Initialized drm 1.1.0 20060810
[ 17.327121] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.327132] pci 0000:01:00.0: setting latency timer to 64
[ 17.327369] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on
minor 0
[ 19.795440] [drm] Setting GART location based on new memory map
[ 19.796093] [drm] Loading R300 Microcode
[ 19.796097] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 19.826586] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 19.826591] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[ 25.004016] eth0: no IPv6 routers present
[ 907.436190] hub 1-0:1.0: unable to enumerate USB device on port 8
[ 908.952043] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 909.115489] usb 5-2: New USB device found, idVendor=0595, idProduct=2002
[ 909.115499] usb 5-2: New USB device strings: Mfr=4, Product=5, SerialNumber=6
[ 909.115506] usb 5-2: Product: Digital Camera
[ 909.115511] usb 5-2: Manufacturer: Default
[ 909.115517] usb 5-2: SerialNumber: Default 1234567
[ 909.115688] usb 5-2: configuration #1 chosen from 1 choice
[ 909.265414] Initializing USB Mass Storage driver...
[ 909.267759] scsi2 : SCSI emulation for USB Mass Storage devices
[ 909.268552] usbcore: registered new interface driver usb-storage
[ 909.268560] USB Mass Storage support registered.
[ 909.284885] usb-storage: device found at 2
[ 909.284891] usb-storage: waiting for device to settle before scanning
[ 914.285490] usb-storage: device scan complete
[ 914.291499] scsi 2:0:0:0: Direct-Access Default Digital Camera 1.
PQ: 0 ANSI: 0 CCS
[ 914.292222] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 914.297467] sd 2:0:0:0: [sdb] 56767 512-byte hardware sectors: (29.0 MB/27.7
MiB)
[ 914.314210] sd 2:0:0:0: [sdb] Write Protect is off
[ 914.314220] sd 2:0:0:0: [sdb] Mode Sense: 00 06 00 00
[ 914.314226] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 914.337475] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 914.337487] sdb: sdb1
[ 914.343488] sdb: p1 size 56767 limited to end of disk
[ 914.343711] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 915.547470] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 1579.184081] usb 5-2: USB disconnect, address 2
** Loaded modules:
Module Size Used by
snd_seq_dummy 2420 0
nls_utf8 1488 0
nls_cp437 5320 0
vfat 8628 0
fat 41452 1 vfat
nls_base 6416 4 nls_utf8,nls_cp437,vfat,fat
usb_storage 48472 0
radeon 122724 0
drm 137920 1 radeon
i2c_core 20844 1 drm
vboxnetadp 66792 0
vboxnetflt 72264 0
vboxdrv 102480 1 vboxnetflt
acpi_cpufreq 7640 0
cpufreq_powersave 1292 0
cpufreq_stats 3520 0
cpufreq_userspace 2768 0
cpufreq_conservative 6256 0
firewire_sbp2 12692 0
loop 13324 0
snd_intel8x0m 12228 0
snd_intel8x0 26584 1
snd_ac97_codec 91264 2 snd_intel8x0m,snd_intel8x0
ac97_bus 1456 1 snd_ac97_codec
snd_pcm_oss 32232 0
snd_mixer_oss 12368 1 snd_pcm_oss
snd_pcm 62420 4
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
ipw2200 119972 0
snd_seq_midi 5688 0
snd_rawmidi 18596 1 snd_seq_midi
libipw 24644 1 ipw2200
snd_seq_midi_event 6212 1 snd_seq_midi
joydev 8576 0
dell_laptop 3164 0
rfkill 9668 1 dell_laptop
snd_seq 42436 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event
serio_raw 4560 0
yenta_socket 21168 1
rng_core 3672 0
dcdbas 6736 1 dell_laptop
rsrc_nonstatic 9664 1 yenta_socket
pcspkr 2104 0
psmouse 37528 0
snd_timer 17436 2 snd_pcm,snd_seq
snd_seq_device 6136 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq
evdev 8028 10
lib80211 6048 2 ipw2200,libipw
button 5060 0
battery 6012 0
snd 49060 12
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
processor 34504 2 acpi_cpufreq
soundcore 6184 1 snd
snd_page_alloc 8180 3 snd_intel8x0m,snd_intel8x0,snd_pcm
ac 2960 0
reiserfs 187592 2
sg 20296 0
sr_mod 13264 0
cdrom 30316 1 sr_mod
sd_mod 28748 4
crc_t10dif 1632 1 sd_mod
ata_generic 4340 0
ide_pci_generic 3632 0
ide_core 88100 1 ide_pci_generic
ahci 30068 0
ata_piix 20848 3
uhci_hcd 19132 0
b44 22100 0
libata 150904 3 ata_generic,ahci,ata_piix
sdhci_pci 6540 0
sdhci 14868 1 sdhci_pci
firewire_ohci 18952 0
ssb 37692 1 b44
pcmcia 24280 1 ssb
ehci_hcd 29680 0
mmc_core 46384 1 sdhci
led_class 3852 1 sdhci
firewire_core 37736 2 firewire_sbp2,firewire_ohci
crc_itu_t 2148 1 firewire_core
pcmcia_core 31212 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia
mii 4664 1 b44
intel_agp 22900 0
scsi_mod 131800 6
usb_storage,firewire_sbp2,sg,sr_mod,sd_mod,libata
video 18044 0
output 2604 1 video
agpgart 30836 2 drm,intel_agp
usbcore 126004 4 usb_storage,uhci_hcd,ehci_hcd
thermal 12580 0
fan 4044 0
thermal_sys 13140 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 03)
Subsystem: Dell Device [1028:0188]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI
Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfd00000-dfefffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0188]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0188]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0188]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0188]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0188]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Dell Inspiron 6000 laptop [1028:0188]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ed00 [size=256]
Region 1: I/O ports at ec40 [size=64]
Region 2: Memory at dffffe00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at dffffd00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic])
Subsystem: Conexant Systems, Inc. Device [14f1:5423]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ee00 [size=256]
Region 1: I/O ports at ec80 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 03)
Subsystem: Dell Device [1028:0188]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 03) (prog-if 80 [Master])
Subsystem: Dell Device [1028:0188]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M22 [Mobility
Radeon X300] [1002:5460] (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:2003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at de00 [size=256]
Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at dfd00000 [disabled] [size=128K]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX
[14e4:170c] (rev 02)
Subsystem: Dell Inspiron 6000 laptop [1028:0188]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dfcfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
Subsystem: Dell Inspiron 6000 laptop [1028:0188]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller
[1180:0552] (rev 08) (prog-if 10 [OHCI])
Subsystem: Dell Inspiron 6000 laptop [1028:0188]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 18
Region 0: Memory at dfcfc800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 17) (prog-if 01)
Subsystem: Dell Inspiron 6000 laptop [1028:0188]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin C routed to IRQ 17
Region 0: Memory at dfcfc700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG
[Calexico2] Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Dell Latitude D600 [8086:2722]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfcfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-1-686 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.9-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-1-686 recommends:
ii libc6-i686 2.9-23 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-1-686 suggests:
ii grub 0.97-55 GRand Unified Bootloader (dummy pa
ii grub-legacy [grub] 0.97-55 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
