Package: linux-image-2.6.26-2-486
Version: 2.6.26-15
Severity: normal
On an idle system with nothing running except sshd, getty and 1 bash shell (1
user logged in - myself), the entropy buffer of
/dev/random gets depleted very quick:
zolder:/tmp# ./a.out ; while true ; do echo `date` `cat
/proc/sys/kernel/random/entropy_avail` ; sleep 1 ; done0
Sun Jun 14 16:36:31 CEST 2009 1487
Sun Jun 14 16:36:32 CEST 2009 1423
Sun Jun 14 16:36:33 CEST 2009 1295
Sun Jun 14 16:36:34 CEST 2009 1231
Sun Jun 14 16:36:35 CEST 2009 1103
Sun Jun 14 16:36:36 CEST 2009 1039
Sun Jun 14 16:36:37 CEST 2009 911
Sun Jun 14 16:36:38 CEST 2009 847
Sun Jun 14 16:36:39 CEST 2009 719
Sun Jun 14 16:36:40 CEST 2009 655
Sun Jun 14 16:36:41 CEST 2009 527
Sun Jun 14 16:36:42 CEST 2009 463
Sun Jun 14 16:36:43 CEST 2009 335
Sun Jun 14 16:36:44 CEST 2009 271
Sun Jun 14 16:36:45 CEST 2009 143
Sun Jun 14 16:36:46 CEST 2009 143
Sun Jun 14 16:36:47 CEST 2009 143
Sun Jun 14 16:36:48 CEST 2009 143
Sun Jun 14 16:36:49 CEST 2009 143
Sun Jun 14 16:36:50 CEST 2009 143
Sun Jun 14 16:36:51 CEST 2009 143
a.out is a tool which adds 1000 bits of entropy to the kernel and then exits
as you can see in 15 seconds the buffer is almost emptied
as nothing else is running, this is probably ccaused by something else in the
kernel
-- Package-specific info:
** Version:
Linux version 2.6.26-2-486 (Debian 2.6.26-15) (da...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Thu Mar 26 00:13:41 UTC 2009
** Command line:
root=/dev/mapper/VGTUINHUIS-root ro
** Not tainted
** Kernel log:
[ 7.256434] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.256523] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.256603] usb usb2: Product: UHCI Host Controller
[ 7.256669] usb usb2: Manufacturer: Linux 2.6.26-2-486 uhci_hcd
[ 7.256736] usb usb2: SerialNumber: 0000:00:10.0
[ 7.256934] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 7.257119] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 7.257272] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 3
[ 7.257398] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000c400
[ 7.257833] usb usb3: configuration #1 chosen from 1 choice
[ 7.258004] hub 3-0:1.0: USB hub found
[ 7.258094] hub 3-0:1.0: 2 ports detected
[ 7.360418] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.360508] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.360588] usb usb3: Product: UHCI Host Controller
[ 7.360653] usb usb3: Manufacturer: Linux 2.6.26-2-486 uhci_hcd
[ 7.360720] usb usb3: SerialNumber: 0000:00:10.1
[ 7.360916] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 7.361087] uhci_hcd 0000:00:10.2: VIA VLink IRQ fixup, from 15 to 11
[ 7.361191] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 7.361333] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 4
[ 7.361458] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000c800
[ 7.361899] usb usb4: configuration #1 chosen from 1 choice
[ 7.362079] hub 4-0:1.0: USB hub found
[ 7.362167] hub 4-0:1.0: 2 ports detected
[ 7.464446] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.464535] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.464615] usb usb4: Product: UHCI Host Controller
[ 7.464680] usb usb4: Manufacturer: Linux 2.6.26-2-486 uhci_hcd
[ 7.464748] usb usb4: SerialNumber: 0000:00:10.2
[ 7.464936] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 7.465106] uhci_hcd 0000:00:10.3: VIA VLink IRQ fixup, from 15 to 11
[ 7.465215] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 7.465363] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 5
[ 7.465491] uhci_hcd 0000:00:10.3: irq 11, io base 0x0000cc00
[ 7.465938] usb usb5: configuration #1 chosen from 1 choice
[ 7.466109] hub 5-0:1.0: USB hub found
[ 7.466201] hub 5-0:1.0: 2 ports detected
[ 7.568444] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.568533] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.568613] usb usb5: Product: UHCI Host Controller
[ 7.568679] usb usb5: Manufacturer: Linux 2.6.26-2-486 uhci_hcd
[ 7.568746] usb usb5: SerialNumber: 0000:00:10.3
[ 7.667766] hda: max request size: 128KiB
[ 7.671181] hda: 40132503 sectors (20547 MB) w/1902KiB Cache, CHS=39813/16/63
[ 7.671355] hda: cache flushes not supported
[ 7.671587] hda: hda1 hda2 < hda5 >
[ 8.048811] device-mapper: uevent: version 1.0.3
[ 8.052682] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 8.990174] PM: Starting manual resume from disk
[ 9.068033] kjournald starting. Commit interval 5 seconds
[ 9.068033] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.192117] udev: starting version 141
[ 11.192301] udev: deprecated sysfs layout; update the kernel or disable
CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 13.073536] input: Power Button (FF) as /class/input/input1
[ 13.100276] ACPI: Power Button (FF) [PWRF]
[ 13.100603] input: Power Button (CM) as /class/input/input2
[ 13.132250] ACPI: Power Button (CM) [PWRB]
[ 13.132592] input: Sleep Button (CM) as /class/input/input3
[ 13.164298] ACPI: Sleep Button (CM) [SLPB]
[ 13.297643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.304752] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.506523] input: PC Speaker as /class/input/input4
[ 13.555040] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 13.555271] parport0: PC-style at 0xe000 [PCSPP,TRISTATE,EPP]
[ 13.652612] 0000:00:14.0: ttyS2 at I/O 0xd800 (irq = 11) is a 16550A
[ 13.652936] 0000:00:14.0: ttyS3 at I/O 0xdc00 (irq = 11) is a 16550A
[ 13.679101] Error: Driver 'pcspkr' is already registered, aborting...
[ 15.277641] EXT3 FS on dm-0, internal journal
[ 15.826818] loop: module loaded
[ 15.970601] vt1211: Found VT1211 chip at 0x6000, revision 2
[ 16.097230] longhaul: VIA C3 'Nehemiah C' [C5P] CPU detected. Powersaver
supported.
[ 16.097405] longhaul: ACPI I/O at 0x400
[ 16.097521] longhaul: Using northbridge support.
[ 16.341278] padlock: Using VIA PadLock ACE for AES algorithm.
[ 16.371061] VIA RNG detected
[ 19.448268] kjournald starting. Commit interval 86400 seconds
[ 19.448268] EXT3 FS on hda1, internal journal
[ 19.448268] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.467512] kjournald starting. Commit interval 86400 seconds
[ 19.467955] EXT3 FS on dm-5, internal journal
[ 19.468094] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.486291] kjournald starting. Commit interval 86400 seconds
[ 19.486291] EXT3 FS on dm-4, internal journal
[ 19.486291] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.501500] kjournald starting. Commit interval 86400 seconds
[ 19.501946] EXT3 FS on dm-1, internal journal
[ 19.502056] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.525636] kjournald starting. Commit interval 86400 seconds
[ 19.526082] EXT3 FS on dm-2, internal journal
[ 19.526192] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.672753] Adding 331768k swap on /dev/mapper/VGTUINHUIS-swap_1.
Priority:-1 extents:1 across:331768k
[ 20.954488] eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 22.334911] NET: Registered protocol family 10
[ 22.336562] lo: Disabled Privacy Extensions
[ 32.580038] eth1: no IPv6 routers present
[ 39.423145] Marking TSC unstable due to: cpufreq changes.
[ 39.872099] Clocksource tsc unstable (delta = -119389651 ns)
[ 319.735399] RPC: Registered udp transport module.
[ 319.735499] RPC: Registered tcp transport module.
** Loaded modules:
Module Size Used by
nfs 207432 1
lockd 54152 1 nfs
nfs_acl 2944 1 nfs
sunrpc 157468 11 nfs,lockd,nfs_acl
ipv6 225172 10
via_rng 2048 0
rng_core 3972 1 via_rng
padlock_aes 4608 0
crypto_blkcipher 14724 1 padlock_aes
aes_generic 29224 1 padlock_aes
cpufreq_ondemand 6036 1
longhaul 8424 0
freq_table 4100 2 cpufreq_ondemand,longhaul
vt1211 13192 0
hwmon_vid 2560 1 vt1211
sbp2 18700 0
loop 12428 0
snd_pcm 60680 0
snd_timer 17668 1 snd_pcm
snd 44964 2 snd_pcm,snd_timer
soundcore 6112 1 snd
snd_page_alloc 7816 1 snd_pcm
parport_serial 5888 0
parport_pc 22436 1 parport_serial
pcspkr 2304 0
parport 30408 1 parport_pc
i2c_viapro 6804 0
i2c_core 19728 1 i2c_viapro
shpchp 25496 0
pci_hotplug 23204 1 shpchp
button 6032 0
evdev 7808 0
ext3 103688 6
jbd 35092 1 ext3
mbcache 6656 1 ext3
dm_mirror 14720 0
dm_log 8192 1 dm_mirror
dm_snapshot 14240 0
dm_mod 45384 16 dm_mirror,dm_log,dm_snapshot
ide_disk 10496 3
ide_pci_generic 3844 0 [permanent]
uhci_hcd 18448 0
ata_generic 4612 0
via_rhine 18184 0
ehci_hcd 28300 0
mii 4864 1 via_rhine
via82cxxx 6916 0 [permanent]
usbcore 117616 3 uhci_hcd,ehci_hcd
sata_via 6916 0
ide_core 95144 3 ide_disk,ide_pci_generic,via82cxxx
libata 141088 2 ata_generic,sata_via
scsi_mod 129804 2 sbp2,libata
dock 8076 1 libata
ohci1394 25136 0
ieee1394 75832 2 sbp2,ohci1394
via_agp 7680 1
agpgart 28336 1 via_agp
thermal 15132 0
processor 28080 1 thermal
fan 4100 0
thermal_sys 10784 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host
Bridge [1106:0259]
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host
Bridge [1106:1259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 CPU Host
Bridge [1106:2259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host
Bridge [1106:3259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host
Bridge [1106:4259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host
Bridge [1106:7259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
[1106:b198] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e8000000-ebffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR+ <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0d.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE
1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link
Layer Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at a000 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at a400 [size=8]
Region 1: I/O ports at a800 [size=4]
Region 2: I/O ports at ac00 [size=8]
Region 3: I/O ports at b000 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: I/O ports at b800 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at bc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
86) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at ee001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: VIA Technologies, Inc. Device [1106:aa01]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II]
[1106:3065] (rev 78)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet
Controller on VT8235 [1106:0102]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at ee002000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
00:14.0 Communication controller [0780]: NetMos Technology PCI 9835 Multi-I/O
Controller [9710:9835] (rev 01)
Subsystem: LSI Logic / Symbios Logic 1P2S [1000:0012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at dc00 [size=8]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at e400 [size=8]
Region 4: I/O ports at e800 [size=8]
Region 5: I/O ports at ec00 [size=16]
Kernel driver in use: parport_serial
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc.
CN400/PM800/PM880/PN800/PN880 [S3 UniChrome Pro] [1106:3118] (rev 02) (prog-if
00 [VGA controller])
Subsystem: VIA Technologies, Inc. CN400/PM800/PM880/PN800/PN880 [S3
UniChrome Pro] [1106:3118]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at ed000000 [disabled] [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: squeeze/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-486
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-486 depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.2 tools for generating an initramfs
ii module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo
linux-image-2.6.26-2-486 recommends no packages.
Versions of packages linux-image-2.6.26-2-486 suggests:
ii grub 0.97-53 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-486/postinst/depmod-error-2.6.26-2-486: false
linux-image-2.6.26-2-486/preinst/initrd-2.6.26-2-486:
linux-image-2.6.26-2-486/preinst/abort-install-2.6.26-2-486:
linux-image-2.6.26-2-486/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-486/preinst/lilo-initrd-2.6.26-2-486: true
linux-image-2.6.26-2-486/postinst/create-kimage-link-2.6.26-2-486: true
linux-image-2.6.26-2-486/preinst/elilo-initrd-2.6.26-2-486: true
linux-image-2.6.26-2-486/postinst/bootloader-error-2.6.26-2-486:
linux-image-2.6.26-2-486/preinst/overwriting-modules-2.6.26-2-486: true
linux-image-2.6.26-2-486/postinst/old-system-map-link-2.6.26-2-486: true
linux-image-2.6.26-2-486/prerm/removing-running-kernel-2.6.26-2-486: true
linux-image-2.6.26-2-486/postinst/bootloader-test-error-2.6.26-2-486:
linux-image-2.6.26-2-486/prerm/would-invalidate-boot-loader-2.6.26-2-486: true
linux-image-2.6.26-2-486/preinst/failed-to-move-modules-2.6.26-2-486:
linux-image-2.6.26-2-486/preinst/bootloader-initrd-2.6.26-2-486: true
linux-image-2.6.26-2-486/preinst/abort-overwrite-2.6.26-2-486:
linux-image-2.6.26-2-486/postinst/old-initrd-link-2.6.26-2-486: true
linux-image-2.6.26-2-486/postinst/old-dir-initrd-link-2.6.26-2-486: true
linux-image-2.6.26-2-486/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-486/postinst/depmod-error-initrd-2.6.26-2-486: false
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
