On Thu, 2009-04-23 at 10:23 -0400, Greg Wooledge wrote: > Package: linux-image-2.6.26-1-686 > Version: 2.6.26-13lenny2 > > Neither mii-tool nor ethtool can set my network interface to full > duplex. This is a huge problem here.
Do you also expect to get a gigabit link or only 100 megabit? > img2:/usr/bin# mii-tool eth0 > eth0: no autonegotiation, 100baseTx-HD, link ok > img2:/usr/bin# mii-tool -F 100baseTx-FD eth0 > img2:/usr/bin# mii-tool > eth0: no autonegotiation, 100baseTx-HD, link ok Please run "mii-tool -v eth0". > mg2:/usr/bin# ethtool eth0 > Settings for eth0: > Supported ports: [ TP ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Half > Port: Twisted Pair > PHYAD: 1 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: g > Wake-on: g > Current message level: 0x000000ff (255) > Link detected: yes > img2:/usr/bin# ethtool -s eth0 duplex full > img2:/usr/bin# ethtool eth0 | grep -i duplex > Duplex: Half Is autonegotiation enabled at the other end of the link? Ben.
signature.asc
Description: This is a digitally signed message part
