Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Followup-For: Bug #242866
After upgrading to latest kernel I'm unable to load alsa's ymfpci firmware
anymore. I get
the following error:
[ 14.696499] firmware: requesting yamaha/ds1e_ctrl.fw
[ 16.012014] AC'97 0 does not respond - RESET
[ 16.020009] AC'97 0 access is not valid [0x0], removing mixer.
[ 16.020453] ACPI: PCI interrupt for device 0000:00:06.0 disabled
[ 16.020499] Yamaha DS-1 PCI: probe of 0000:00:06.0 failed with error -5
[ 16.862560] Filesystem "dm-0": Disabling barriers, not supported by the
underlying device
thanks
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC
2009
** Command line:
root=/dev/mapper/Sys-root ro
** Tainted: P (1)
** Kernel log:
[ 5.239613] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) ->
IRQ 20
[ 5.239635] VP_IDE: not 100% native mode: will probe irqs later
[ 5.239661] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[ 5.239678] ide0: BM-DMA at 0xfc00-0xfc07
[ 5.239691] ide1: BM-DMA at 0xfc08-0xfc0f
[ 5.239697] Probing IDE interface ide0...
[ 5.528032] usb 1-1: device not accepting address 2, error -71
[ 5.584043] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5.808097] Probing IDE interface ide1...
[ 6.672150] hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
[ 7.088015] usb 1-1: new low speed USB device using uhci_hcd and address 4
[ 7.252004] usb 1-1: configuration #1 chosen from 1 choice
[ 7.281158] usb 1-1: New USB device found, idVendor=0458, idProduct=001a
[ 7.281169] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.281175] usb 1-1: Product: PowerScroll EYE
[ 7.281178] usb 1-1: Manufacturer: KYE
[ 7.307340] usbcore: registered new interface driver hiddev
[ 7.324016] input: KYE PowerScroll EYE as /class/input/input1
[ 7.324016] input,hidraw0: USB HID v1.10 Mouse [KYE PowerScroll EYE] on
usb-0000:00:10.0-1
[ 7.324016] usbcore: registered new interface driver usbhid
[ 7.324016] usbhid: v2.6:USB HID core driver
[ 7.456109] hdd: CREATIVE CD5250E, ATAPI CD/DVD-ROM drive
[ 7.492004] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 7.492004] hdc: MWDMA2 mode selected
[ 7.492004] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 7.492004] hdd: MWDMA2 mode selected
[ 7.492004] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 7.492004] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.583604] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
[ 7.583620] Uniform CD-ROM driver Revision: 3.20
[ 7.587709] hdd: ATAPI 52X CD-ROM drive, 128kB Cache
[ 7.798340] device-mapper: uevent: version 1.0.3
[ 7.800381] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 8.345289] PM: Starting manual resume from disk
[ 8.438244] SGI XFS with ACLs, security attributes, realtime, large block
numbers, no debug enabled
[ 8.440782] SGI XFS Quota Management subsystem
[ 8.443762] Filesystem "dm-0": Disabling barriers, not supported by the
underlying device
[ 8.443996] XFS mounting filesystem dm-0
[ 8.476029] Ending clean XFS mount for filesystem: dm-0
[ 10.276035] udevd version 125 started
[ 12.521288] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.532062] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.542491] Linux agpgart interface v0.103
[ 12.545199] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 12.550660] agpgart: AGP aperture is 64M @ 0xe0000000
[ 12.801986] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 12.804039] firmware: requesting yamaha/ds1_dsp.fw
[ 12.946033] input: Power Button (FF) as /class/input/input2
[ 12.972603] ACPI: Power Button (FF) [PWRF]
[ 12.972749] input: Power Button (CM) as /class/input/input3
[ 13.000183] ACPI: Power Button (CM) [PWRB]
[ 13.000363] input: Sleep Button (CM) as /class/input/input4
[ 13.029894] ACPI: Sleep Button (CM) [SLPB]
[ 14.228179] input: PC Speaker as /class/input/input5
[ 14.613397] parport_pc 00:0a: reported by Plug and Play ACPI
[ 14.613499] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 14.696499] firmware: requesting yamaha/ds1e_ctrl.fw
[ 16.012014] AC'97 0 does not respond - RESET
[ 16.020009] AC'97 0 access is not valid [0x0], removing mixer.
[ 16.020453] ACPI: PCI interrupt for device 0000:00:06.0 disabled
[ 16.020499] Yamaha DS-1 PCI: probe of 0000:00:06.0 failed with error -5
[ 16.862560] Filesystem "dm-0": Disabling barriers, not supported by the
underlying device
[ 18.114818] ide_generic: please use "probe_mask=0x3f" module parameter for
probing all legacy ISA IDE ports
[ 18.114838] ide_generic: I/O resource 0x1F0-0x1F7 not free.
[ 18.114844] ide_generic: I/O resource 0x170-0x177 not free.
[ 20.176139] fuse init (API version 7.9)
[ 20.445773] kjournald starting. Commit interval 5 seconds
[ 20.446009] EXT3 FS on sda1, internal journal
[ 20.446019] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.452576] Filesystem "dm-4": Disabling barriers, not supported by the
underlying device
[ 20.463433] XFS mounting filesystem dm-4
[ 20.544831] Ending clean XFS mount for filesystem: dm-4
[ 20.556098] Filesystem "dm-6": Disabling barriers, not supported by the
underlying device
[ 20.566310] XFS mounting filesystem dm-6
[ 20.632004] Ending clean XFS mount for filesystem: dm-6
[ 20.636005] Filesystem "dm-2": Disabling barriers, not supported by the
underlying device
[ 20.636005] XFS mounting filesystem dm-2
[ 20.758424] Ending clean XFS mount for filesystem: dm-2
[ 20.758424] Filesystem "dm-3": Disabling barriers, not supported by the
underlying device
[ 20.758424] XFS mounting filesystem dm-3
[ 20.828620] Ending clean XFS mount for filesystem: dm-3
[ 20.828620] Filesystem "dm-5": Disabling barriers, not supported by the
underlying device
[ 20.828620] XFS mounting filesystem dm-5
[ 20.914517] Ending clean XFS mount for filesystem: dm-5
[ 21.204317] Adding 815096k swap on /dev/mapper/Sys-Swap. Priority:-1
extents:1 across:815096k
[ 25.123862] NET: Registered protocol family 10
[ 25.124665] lo: Disabled Privacy Extensions
[ 25.126253] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.816175] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 26.816186] b44: eth0: Flow control is off for TX and off for RX.
[ 26.816307] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.740621] lp0: using parport0 (interrupt-driven).
[ 31.781057] ppdev: user-space parallel port driver
[ 37.032036] eth0: no IPv6 routers present
[ 40.597723] nvidia: module license 'NVIDIA' taints kernel.
[ 40.859112] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 40.859950] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun
4 23:43:17 PDT 2008
[ 41.009917] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 41.009945] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 41.010011] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
** Loaded modules:
Module Size Used by
nvidia 7086148 24
ppdev 6468 0
lp 8164 0
ipv6 235300 14
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
fuse 42908 1
psmouse 32336 0
ide_generic 2464 0 [permanent]
ide_disk 10496 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
i2c_viapro 6836 0
i2c_core 19828 2 nvidia,i2c_viapro
pcspkr 2432 0
button 6096 0
snd_ymfpci 28224 0
gameport 10700 1 snd_ymfpci
snd_ac97_codec 88484 1 snd_ymfpci
ac97_bus 1728 1 snd_ac97_codec
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 3 snd_ymfpci,snd_ac97_codec,snd_pcm_oss
snd_opl3_lib 9344 1 snd_ymfpci
snd_timer 17800 3 snd_ymfpci,snd_pcm,snd_opl3_lib
snd_hwdep 6212 1 snd_opl3_lib
snd_page_alloc 7816 2 snd_ymfpci,snd_pcm
snd_mpu401_uart 6368 1 snd_ymfpci
via_agp 7744 1
agpgart 28776 2 nvidia,via_agp
shpchp 25528 0
pci_hotplug 23460 1 shpchp
snd_rawmidi 18496 1 snd_mpu401_uart
snd_seq_device 6380 2 snd_opl3_lib,snd_rawmidi
snd 45604 11
snd_ymfpci,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 6368 1 snd
joydev 8480 0
evdev 8000 4
xfs 458072 6
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 18 dm_mirror,dm_log,dm_snapshot
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ata_generic 4676 0
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
via82cxxx 6948 0 [permanent]
sd_mod 22200 4
floppy 47716 0
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 4 usbhid,ehci_hcd,uhci_hcd
ide_pci_generic 3908 0 [permanent]
ide_core 96168 5
ide_generic,ide_disk,ide_cd_mod,via82cxxx,ide_pci_generic
sata_via 6980 3
libata 140384 2 ata_generic,sata_via
scsi_mod 129356 2 sd_mod,libata
dock 8304 1 libata
b44 22288 0
ssb 33476 1 b44
pcmcia 29548 1 ssb
pcmcia_core 31892 2 ssb,pcmcia
firmware_class 6816 2 snd_ymfpci,pcmcia
mii 4896 1 b44
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
Host Bridge [1106:3189] (rev 80)
Subsystem: VIA Technologies, Inc. KT4AV motherboard (KT400A) [1106:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
[1106:b198] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: cdd00000-ddcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:06.0 Multimedia audio controller [0401]: Yamaha Corporation YMF-754 [DS-1E
Audio Controller] [1073:0012]
Subsystem: Yamaha Corporation DS-XG PCI Audio Codec [1073:0012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfff0000 (32-bit, non-prefetchable) [size=32K]
Region 1: I/O ports at d400 [size=64]
Region 2: I/O ports at d000 [size=4]
Capabilities: <access denied>
Kernel modules: snd-ymfpci
00:0b.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T
[14e4:4401] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:590c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 18
Region 0: Memory at dfffa000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b44
Kernel modules: b44
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller [1106:3149] (rev 80)
Subsystem: Micro-Star International Co., Ltd. KT6 Delta-FIS2R (MS-6590)
[1462:5901]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: I/O ports at d800 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
Kernel modules: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. KT6 Delta-FIS2R (MS-6590)
[1462:5901]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. KT6 Delta-FIS2R (MS-6590)
[1462:5901]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. KT6 Delta-FIS2R (MS-6590)
[1462:5901]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. KT6 Delta-FIS2R (MS-6590)
[1462:5901]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. KT6 Delta-FIS2R (MS-6590)
[1462:5901]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
86) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. KT6 Delta-FIS2R (MS-6590)
[1462:5901]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at dfff9e00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: VIA Technologies, Inc. Device [1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: i2c-viapro
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX
5200] [10de:0322] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at dfee0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=es_PE.UTF-8, LC_CTYPE=es_PE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.25 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.13-5 Yet Another mkInitRD
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.9-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
