Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-11 Severity: important Hello
After upgrading to linux-image-2.6.26-1-amd64 my computer does not boot anymore. It seems that the SATA hard drive is beeing detected but not recognised as block device. The only suspicious line I could find was: [ 5.332468] ata_piix 0000:00:1f.2: version 2.12 [ 5.332468] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 5.332468] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 5.332652] PCI: Unable to reserve I/O region #1:8...@1f0 for device 0000:00:1f.2 [ 5.332961] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) [ 5.332961] PCI: Unable to reserve I/O region #3:8...@170 for device 0000:00:1f.2 [ 5.332961] ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) [ 5.332961] ata_piix 0000:00:1f.2: no available native port Attached are two dmesg outputs, one from a working 2.6.25-2-amd64 and one from the above kernel. $ lsscsi [2:0:0:0] disk ATA WDC WD2500KS-00M 02.0 /dev/sda [4:0:0:0] cd/dvd HL-DT-ST DVDRAM GSA-H62N CL00 /dev/scd0 $ lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600 GT (rev a1) 03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) 03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) The only similar bug reports I could find were 498702, 508235, both against "Marvell" controllers or with other error messages. I hope someone can figure out the problem. bye, -christian- -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.25-2-amd64 (SMP w/2 CPU cores) Locale: lang=de...@euro, lc_ctype=de...@euro (charmap=ISO-8859-15) (ignored: LC_ALL set to de...@euro) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92l tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-47lenny1 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
