AFAIK it still does not work even with the very latest kernels, but I no longer use this laptop and do not care whether the bug remains open.
zw On Thu, Feb 12, 2009 at 2:36 PM, Debian Bug Tracking System <ow...@bugs.debian.org> wrote: > > This is an automatic notification regarding your Bug report > which was filed against the linux-2.6 package: > > #390040: does not resume from suspend-to-RAM on toshiba satellite m70 > > It has been closed by maximilian attems <m...@stro.at>. > > Their explanation is attached below along with your original report. > If this explanation is unsatisfactory and you have not received a > better one in a separate message then please contact maximilian attems > <m...@stro.at> by > replying to this email. > > > -- > 390040: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=390040 > Debian Bug Tracking System > Contact ow...@bugs.debian.org with problems > > > ---------- Forwarded message ---------- > From: maximilian attems <m...@stro.at> > To: 390040-d...@bugs.debian.org > Date: Thu, 12 Feb 2009 23:34:32 +0100 > Subject: re: linux-image-2.6.17-2-686: suspend to {disk, mem} fails on > toshiba satellite A30 > Version: 2.6.26-1 > >> suspend to disk works in 2.6.19-1-686. suspend to ram works a bit >> better, but not quite there. > > thanks for reporting, as no activity since i'd guess that > it happen to work since. if not please reopen. > > thanks for report. > > -- > maks > > > > ---------- Forwarded message ---------- > From: Zack Weinberg <za...@panix.com> > To: Debian Bug Tracking System <sub...@bugs.debian.org> > Date: Mon, 09 Jul 2007 21:28:15 -0700 > Subject: does not resume from suspend-to-RAM on toshiba satellite m70 > Package: linux-image-2.6.21-2-686 > Version: 2.6.21-5 > Severity: normal > > My laptop - a Toshiba Satellite M70 [I believe this was a model sold only > in Canada, not that that stopped Newegg from selling it to me ;-)] suspends > to RAM just fine, but never comes back. I have experimented extensively > with 'pm-suspend' -- the behavior is always the same: when I push the > power button or reopen the lid, the power light goes from blinking to solid, > the fan turns on, the hard drive spins up, and then nothing. The screen > remains blank, the backlight off, and the keyboard unresponsive. > The only way to get it out of this state is to hold down the power button > until the computer turns off, and then turn it back on. > > Yes, I am using the closed-source Atheros drivers for the wireless modem, > but the symptoms are exactly the same even if that driver has never been > loaded. In fact, the symptoms are exactly the same even if I do > "echo mem > /sys/power/state" from an init=/bin/sh boot with only the > IDE drivers and dm-crypt (my HD is encrypted) loaded. > > I cannot be sure, but the appearance is that user space is never reactivated. > > -- Package-specific info: > ** Version: Linux version 2.6.21-2-686 (Debian 2.6.21-5) (wa...@debian.org) > (gcc version 4.1.3 20070601 (prerelease) (Debian 4.1.2-12)) #1 SMP Mon Jun 25 > 20:53:36 UTC 2007 > > ** Tainted: PFSRMB > > ** Kernel log: > ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0214000-d02147ff] > Max Packet=[2048] IR/IT contexts=[4/8] > ATIIXP: IDE controller at PCI slot 0000:00:14.1 > ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 > ATIIXP: chipset revision 128 > ATIIXP: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio > Probing IDE interface ide0... > Time: acpi_pm clocksource has been installed. > hda: HTS541080G9AT00, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > Clocksource tsc unstable (delta = -127628599 ns) > ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f6180400ef5] > hdc: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 22 (level, low) -> IRQ 19 > eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:dc:00:01, IRQ 19 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) > hda: max request size: 512KiB > hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100) > hda: cache flushes supported > hda: hda1 hda2 < hda5 > > hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: > dm-de...@redhat.com > Attempting manual resume > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > Linux agpgart interface v0.102 (c) Dave Jones > Real Time Clock Driver v1.12ac > input: PC Speaker as /class/input/input1 > input: PS/2 Mouse as /class/input/input2 > piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device > input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 > ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 > atiixp: codec reset timeout > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > ath_hal: module license 'Proprietary' taints kernel. > ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > wlan: 0.8.4.2 (0.9.3) > ath_pci: 0.9.4.5 (0.9.3) > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 > ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 21 > ath_rate_sample: 1.2 (0.9.3) > wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps > 36Mbps 48Mbps 54Mbps > wifi0: H/W encryption support: WEP AES AES_CCM TKIP > wifi0: mac 7.8 phy 4.5 radio 5.6 > wifi0: Use hw queue 1 for WME_AC_BE traffic > wifi0: Use hw queue 0 for WME_AC_BK traffic > wifi0: Use hw queue 2 for WME_AC_VI traffic > wifi0: Use hw queue 3 for WME_AC_VO traffic > wifi0: Use hw queue 8 for CAB traffic > wifi0: Use hw queue 9 for beacons > wifi0: Atheros 5212: mem=0xd0200000, irq=21 > Yenta: CardBus bridge found at 0000:04:04.0 [1179:ff00] > Yenta: Using CSCINT to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:04:04.0, mfunc 0x00111c12, devctl 0x44 > Yenta: ISA IRQ mask 0x0ef8, PCI irq 16 > Socket status: 30000006 > Yenta: Raising subordinate bus# of parent bus (#04) from #04 to #08 > pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff > cs: IO port probe 0xa000-0xafff: clean. > pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff > pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff > cs: IO port probe 0x100-0x3af: clean. > cs: IO port probe 0x3e0-0x4ff: clean. > cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f > cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 > 0xc68-0xc6f 0xcd0-0xcdf > cs: IO port probe 0xa00-0xaff: clean. > EXT3 FS on dm-1, internal journal > loop: loaded (max 8 devices) > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS on dm-3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 1351672k swap on /dev/mapper/boheme-swap_1. Priority:-1 extents:1 > across:1351672k > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ACPI: Battery Slot [BAT1] (battery present) > ACPI: AC Adapter [ACAD] (on-line) > input: Power Button (FF) as /class/input/input4 > ACPI: Power Button (FF) [PWRF] > input: Lid Switch as /class/input/input5 > ACPI: Lid Switch [LID] > input: Power Button (CM) as /class/input/input6 > ACPI: Power Button (CM) [PWRB] > lp: driver loaded but no devices found > ppdev: user-space parallel port driver > eth0: link down > ADDRCONF(NETDEV_UP): eth0: link is not ready > ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready > ath0: no IPv6 routers present > > ** Loaded modules: > Module Size Used by > wlan_tkip 11680 2 > binfmt_misc 10984 1 > ppdev 8580 0 > parport_pc 32740 0 > lp 10884 0 > parport 33672 3 ppdev,parport_pc,lp > button 7952 0 > ac 5220 0 > battery 10020 0 > ipv6 236256 10 > cpufreq_conservative 6888 0 > cpufreq_ondemand 7884 0 > cpufreq_powersave 1792 0 > cpufreq_stats 5120 0 > cpufreq_userspace 4128 0 > freq_table 4512 2 cpufreq_ondemand,cpufreq_stats > sbp2 21188 0 > loop 15880 0 > pcmcia 35276 0 > firmware_class 9408 1 pcmcia > wlan_scan_sta 12416 1 > ath_rate_sample 11712 1 > joydev 9152 0 > tsdev 7520 0 > yenta_socket 24876 1 > rsrc_nonstatic 11968 1 yenta_socket > pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic > snd_atiixp_modem 15368 0 > snd_pcm_oss 39168 0 > snd_mixer_oss 15328 1 snd_pcm_oss > ath_pci 88096 0 > wlan 182468 5 > wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci > ath_hal 191408 3 ath_rate_sample,ath_pci > shpchp 30996 0 > pci_hotplug 29088 1 shpchp > snd_atiixp 19084 0 > snd_ac97_codec 92356 2 snd_atiixp_modem,snd_atiixp > serio_raw 6564 0 > ac97_bus 2272 1 snd_ac97_codec > i2c_piix4 8556 0 > snd_pcm 71940 4 > snd_atiixp_modem,snd_pcm_oss,snd_atiixp,snd_ac97_codec > snd_timer 20868 1 snd_pcm > pcspkr 3136 0 > rtc 12760 0 > ati_agp 8748 0 > agpgart 32168 1 ati_agp > snd 48132 7 > snd_atiixp_modem,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer > soundcore 7424 1 snd > evdev 9216 4 > i2c_core 20480 1 i2c_piix4 > psmouse 34952 0 > snd_page_alloc 9512 3 snd_atiixp_modem,snd_atiixp,snd_pcm > eth1394 18276 0 > ext3 120904 3 > jbd 55208 1 ext3 > mbcache 8164 1 ext3 > sha256 11008 0 > aes 27680 2 > cbc 4256 1 > blkcipher 5956 1 cbc > dm_crypt 12808 1 > ide_generic 1344 0 [permanent] > dm_mirror 20116 0 > dm_snapshot 16420 0 > dm_mod 52556 12 dm_crypt,dm_mirror,dm_snapshot > ide_cd 36512 0 > cdrom 32768 1 ide_cd > ide_disk 15648 3 > 8139cp 22336 0 > atiixp 6032 0 [permanent] > generic 4804 0 [permanent] > ide_core 115016 5 ide_generic,ide_cd,ide_disk,atiixp,generic > 8139too 25536 0 > mii 5280 2 8139cp,8139too > ohci1394 32432 0 > ieee1394 89560 3 sbp2,eth1394,ohci1394 > ehci_hcd 30796 0 > ata_generic 8100 0 > libata 109172 1 ata_generic > scsi_mod 133740 2 sbp2,libata > ohci_hcd 19684 0 > usbcore 123272 3 ehci_hcd,ohci_hcd > thermal 14120 0 > processor 30888 1 thermal > fan 4868 0 > > ** PCI devices: > 00:00.0 Host bridge [0600]: ATI Technologies Inc Unknown device [1002:5a31] > (rev 01) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 64 > > 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] > (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00009000-00009fff > Memory behind bridge: d0100000-d01fffff > Prefetchable memory behind bridge: d8000000-dfffffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > Capabilities: <access denied> > > 00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36] > (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: <access denied> > > 00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host > Controller [1002:4374] (rev 80) (prog-if 10 [OHCI]) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at d0004000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > > 00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host > Controller [1002:4375] (rev 80) (prog-if 10 [OHCI]) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at d0005000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > > 00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host > Controller [1002:4373] (rev 80) (prog-if 20 [EHCI]) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at d0006000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > > 00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller > [1002:4372] (rev 81) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Region 0: I/O ports at 8400 [size=16] > Region 1: Memory at d0007000 (32-bit, non-prefetchable) [size=1K] > > 00:14.1 IDE interface [0101]: ATI Technologies Inc Standard Dual Channel PCI > IDE Controller ATI [1002:4376] (rev 80) (prog-if 8a [Master SecP PriP]) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at 8410 [size=16] > Capabilities: <access denied> > > 00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge > [1002:4377] (rev 80) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > > 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge > [1002:4371] (rev 80) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=04, subordinate=08, sec-latency=64 > I/O behind bridge: 0000a000-0000afff > Memory behind bridge: d0200000-d02fffff > Prefetchable memory behind bridge: 20000000-23ffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > > 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 > AC'97 Audio Controller [1002:4370] (rev 80) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (500ns min), Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at d0007400 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > > 00:14.6 Modem [0703]: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller > [1002:4378] (rev 80) (prog-if 00 [Generic]) > Subsystem: Toshiba America Info Systems Unknown device [1179:0001] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (500ns min), Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at d0007800 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > > 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon > Xpress 200M] [1002:5a62] (prog-if 00 [VGA]) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff01] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 66 (2000ns min), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at 9000 [size=256] > Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at d0120000 [disabled] [size=128K] > Capabilities: <access denied> > > 04:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 > IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI]) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at d0214000 (32-bit, non-prefetchable) [size=2K] > Region 1: Memory at d0210000 (32-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > > 04:02.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5005G > 802.11abg NIC [168c:001a] (rev 01) > Subsystem: Askey Computer Corp. Unknown device [144f:7094] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 21 > Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=64K] > Capabilities: <access denied> > > 04:04.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller > [1524:1410] (rev 01) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 168, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at d0215000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=04, secondary=05, subordinate=08, sec-latency=176 > Memory window 0: 20000000-23fff000 (prefetchable) > Memory window 1: 24000000-27fff000 > I/O window 0: 0000a400-0000a4ff > I/O window 1: 0000a800-0000a8ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > > 04:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) > Subsystem: Toshiba America Info Systems Unknown device [1179:ff00] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 19 > Region 0: I/O ports at a000 [size=256] > Region 1: Memory at d0214800 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > > > > -- System Information: > Debian Release: lenny/sid > APT prefers unstable > APT policy: (500, 'unstable'), (1, 'experimental') > Architecture: i386 (i686) > > Kernel: Linux 2.6.21-2-686 (SMP w/1 CPU core) > Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/bash > > Versions of packages linux-image-2.6.21-2-686 depends on: > ii initramfs-tools [linux-initr 0.89 tools for generating an initramfs > ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel > mo > > Versions of packages linux-image-2.6.21-2-686 recommends: > ii libc6-i686 2.5-11 GNU C Library: Shared libraries > [i > > -- debconf information: > shared/kernel-image/really-run-bootloader: true > linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true > linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk: > linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: > true > linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686: > linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686: > linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false > linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686: > linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true > linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/kimage-is-a-directory: > linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686: > linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686: > linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686: > linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true > linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false > linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true > linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686: > > > -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
