--- Begin Message ---
Package: linux-image-2.6.17-2-686
Version: 2.6.17-9
Severity: normal
So, i got a new laptop... The linux kernel used to be real nice to me on
my old thinkpad, but it got stolen so now i'm with a Toshiba Satellite
A30.
I can't either suspend to disk or ram. i use echo disk or echo mem >
/sys/power/state to test.
When suspending to disk, i get this on the console:
cpufreq: suspend failed to assert current frequency is what timing core thinks
it is
swsusp: Need to copy 31320 pages
swsusp: critical section/: done (31320 pages copied)
...
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: thermal monitoring enabled
swsusp: restoring highmem
cpufreq: suspend failed to assert current frequency is what timing core thinks
it is
...
Those were copied by hand. The cpufreq message makes me think the
problem might be related to the frequency scaling drivers. Indeed, the
gnome applet tells me the CPU jumps between 1.6Ghz and 3.06Ghz when
scaling, when the CPU is supposed to be a 2.50Ghz.
I will try disabling frequency scaling and X11 to see if that helps.
I found another report[1] of this laptop having problems with ACPI, so
it's very likely a problem that's been there for a while.
I have started documenting[2] the fun I'm having with Debian on this
laptop.
I have attached a dmidecode (because I think the problem is
ACPI-related) and lspci -vv (because it's always good) and a dmesg
(because more is better here).
The problem happens in 2.6.16, .17 and .18 (from sid). I am available
for debugging and testing this to the death.
Thanks,
A.
[1]
http://web.archive.org/web/20050205233442/tiptsoft.com/laptop/linux.html
[2] http://wiki.koumbit.net/TheAnarcat/ToshibaSatelliteA30
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.17-2-686 depends on:
ii initramfs-tools [linux-initra 0.80 tools for generating an initramfs
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.17-2-686 recommends:
ii libc6-i686 2.3.6.ds1-4 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.17-2-686/postinst/old-initrd-link-2.6.17-2-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.17-2-686/postinst/old-dir-initrd-link-2.6.17-2-686: true
linux-image-2.6.17-2-686/preinst/lilo-initrd-2.6.17-2-686: true
linux-image-2.6.17-2-686/preinst/failed-to-move-modules-2.6.17-2-686:
linux-image-2.6.17-2-686/postinst/depmod-error-initrd-2.6.17-2-686: false
linux-image-2.6.17-2-686/postinst/create-kimage-link-2.6.17-2-686: true
linux-image-2.6.17-2-686/postinst/bootloader-test-error-2.6.17-2-686:
linux-image-2.6.17-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.17-2-686/prerm/removing-running-kernel-2.6.17-2-686: true
linux-image-2.6.17-2-686/preinst/abort-overwrite-2.6.17-2-686:
linux-image-2.6.17-2-686/preinst/already-running-this-2.6.17-2-686:
linux-image-2.6.17-2-686/postinst/old-system-map-link-2.6.17-2-686: true
linux-image-2.6.17-2-686/preinst/bootloader-initrd-2.6.17-2-686: true
linux-image-2.6.17-2-686/preinst/initrd-2.6.17-2-686:
linux-image-2.6.17-2-686/preinst/abort-install-2.6.17-2-686:
linux-image-2.6.17-2-686/preinst/overwriting-modules-2.6.17-2-686: true
linux-image-2.6.17-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.17-2-686/preinst/elilo-initrd-2.6.17-2-686: true
linux-image-2.6.17-2-686/prerm/would-invalidate-boot-loader-2.6.17-2-686: true
linux-image-2.6.17-2-686/postinst/depmod-error-2.6.17-2-686: false
linux-image-2.6.17-2-686/postinst/bootloader-error-2.6.17-2-686:
*** /tmp/dmidecode
# dmidecode 2.8
SMBIOS 2.31 present.
31 structures occupying 1002 bytes.
Table at 0x000DF010.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: TOSHIBA
Version: V1.10
Release Date: 08/19/2003
Address: 0xE6910
Runtime Size: 104176 bytes
ROM Size: 512 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
IEEE 1394 boot is supported
Smart battery is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: TOSHIBA
Product Name: Satellite A30
Version: PSA30C-00YS5
Serial Number: X3314153K
UUID: 69D271BF-E313-11D7-B956-00023F93CDC8
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: TOSHIBA
Product Name: DBL00
Version: Null
Serial Number: 0123456789AB
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: TOSHIBA
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag: No Asset Tag
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: NWD
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 29 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 2, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: A0
Voltage: 1.8 V
External Clock: Unknown
Max Speed: 3200 MHz
Current Speed: 2527 MHz
Status: Populated, Enabled
Upgrade: Slot 1
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 5, 22 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 512 MB
Maximum Total Memory Size: 1536 MB
Supported Speeds:
Other
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 3
0x0006
0x0007
0x0008
Enabled Error Correcting Capabilities:
None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: M1
Bank Connections: 0 1
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 256 MB (Double-bank Connection)
Enabled Size: 256 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: M2
Bank Connections: 2 3
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 KB
Maximum Size: 16 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 512 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JP11
Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JP14
Internal Connector Type: None
External Reference Designator: SVGA-Out
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JP13/JP26
Internal Connector Type: None
External Reference Designator: USB
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JP23
Internal Connector Type: None
External Reference Designator: 1394
External Connector Type: IEEE 1394
Port Type: Firewire (IEEE P1394)
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JP3
Internal Connector Type: None
External Reference Designator: MIC_IN
External Connector Type: RJ-11
Port Type: MIDI Port
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JP5
Internal Connector Type: None
External Reference Designator: HEADPHONE
External Connector Type: RJ-11
Port Type: MIDI Port
Handle 0x0010, DMI type 9, 13 bytes
System Slot Information
Designation: ENE 1410
Type: 32-bit PC Card (PCMCIA)
Current Usage: Unknown
Length: Other
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Hot-plug devices are supported
Handle 0x0011, DMI type 10, 8 bytes
On Board Device 1 Information
Type: Video
Status: Disabled
Description: Intel MontaraGT
On Board Device 2 Information
Type: Sound
Status: Disabled
Description: Realtek ACL202
Handle 0x0012, DMI type 11, 5 bytes
OEM Strings
String 1: PSA30C-00YS5,C00YS5001
Handle 0x0013, DMI type 12, 5 bytes
System Configuration Options
Handle 0x0014, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0015, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 256 MB
Form Factor: SODIMM
Set: 1
Locator: JP21
Bank Locator: DIMM 0
Type: DDR
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0016, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0014
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: SODIMM
Set: 1
Locator: JP20
Bank Locator: DIMM 1
Type: DDR
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0017, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0002FFFFFFF
Range Size: 768 MB
Physical Array Handle: 0x0014
Partition Width: 0
Handle 0x0018, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000FFFFFFF
Range Size: 256 MB
Physical Device Handle: 0x0015
Memory Array Mapped Address Handle: 0x0017
Partition Row Position: 2
Handle 0x0019, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Touch Pad
Interface: PS/2
Buttons: 2
Handle 0x001A, DMI type 22, 26 bytes
Portable Battery
Location: 1st Battery
Manufacturer: SONY
Manufacture Date: 08/24/2003
Serial Number: 3658Q
Name: PA3250U
Chemistry: Lithium Ion
Design Capacity: 3900 mWh
Design Voltage: 14800 mV
SBDS Version: Not Specified
Maximum Error: Unknown
OEM-specific Information: 0x00000000
Handle 0x001B, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x001C, DMI type 126, 4 bytes
Inactive
Handle 0x001D, DMI type 127, 4 bytes
End Of Table
Handle 0x001E, DMI type 127, 4 bytes
End Of Table
*** /tmp/lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to
I/O Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] Vendor Specific Information
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated
Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1800 [size=8]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics
Device (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 4: I/O ports at 1820 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 209
Region 4: I/O ports at 1840 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 193
Region 4: I/O ports at 1860 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI
Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Satellite 2430
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 201
Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff
Prefetchable memory behind bridge: 40000000-41ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge
(rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev
03) (prog-if 8a [Master SecP PriP])
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 193
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1810 [size=16]
Region 5: Memory at 42000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1880 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 217
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97
Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Toshiba America Info Systems Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 217
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 177
Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 40000000-41fff000 (prefetchable)
Memory window 1: 44000000-45fff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
Subsystem: D-Link System Inc Unknown device 3b08
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 177
Region 0: Memory at 44020000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at 44000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
*** /var/log/dmesg
Linux version 2.6.17-2-686 (Debian 2.6.17-9) (wa...@debian.org) (gcc version
4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Wed Sep 13 16:34:10 UTC
2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002dee0000 (usable)
BIOS-e820: 000000002dee0000 - 000000002deeb000 (ACPI data)
BIOS-e820: 000000002deeb000 - 000000002df00000 (ACPI NVS)
BIOS-e820: 000000002df00000 - 0000000030000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
0MB HIGHMEM available.
734MB LOWMEM available.
found SMP MP-table at 000f6ca0
On node 0 totalpages: 188128
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 184032 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 TOSCPL ) @ 0x000f6c70
ACPI: RSDT (v001 TOSCPL RSDT 0x06040000 LTP 0x00000000) @ 0x2dee59da
ACPI: FADT (v001 TOSCPL MONTARA 0x06040000 PTL 0x00000050) @ 0x2deeaf3c
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x2deeafb0
ACPI: DSDT (v001 TOSCPL MONTARAG 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2498.363 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 737940k/752512k available (1482k kernel code, 13996k reserved, 544k
data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5006.73 BogoMIPS (lpj=10013474)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
CPU0: Intel(R) Celeron(R) CPU 2.50GHz stepping 09
Total of 1 processors activated (5006.73 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4725k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try
'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 7 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *9
ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:04: ioport range 0x600-0x60f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 00003400-000034ff
IO window: 00003800-000038ff
PREFETCH window: 40000000-41ffffff
MEM window: 44000000-45ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: e0200000-e02fffff
PREFETCH window: 40000000-41ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1159481213.884:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
ACPI wakeup devices:
ELAN USB1 USB2 USB3 EUSB MODM
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:02:01.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible
chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 185
eth0: RealTek RTL8139 at 0x3000, 00:02:3f:93:cd:c8, IRQ 185
eth0: Identified 8139 chip type 'RTL-8101'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
hda: TOSHIBA MK3021GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R2412, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 201, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 177, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hda6 hda7 hda8 hda9 hda10 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 209, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 193, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
FDC 0 is a post-1991 82077
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
Linux agpgart interface v0.101 (c) Dave Jones
Real Time Clock Driver v1.12ac
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x44
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 32636K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
Yenta: ISA IRQ mask 0x0c38, PCI irq 177
Socket status: 30000020
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x41ffffff
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1f.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pccard: CardBus card inserted into slot 0
yenta EnE: chaning testregister 0xC9, 04 -> 04
intel8x0_measure_ac97_clock: measured 55281 usecs
intel8x0: clocking to 48000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random hardware driver 1.0.0 loaded
acx: this driver is still EXPERIMENTAL
acx: reading README file and/or Craig's HOWTO is recommended, visit
http://acx100.sf.net in case of further questions/discussion
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as
non-working firmware upload. Report them
running on a little-endian CPU
PCI module v0.3.35 initialized, waiting for cards to probe...
PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:03:00.0 to 64
acx: found ACX111-based wireless network card at 0000:03:00.0, irq:177,
phymem1:0x44020000, phymem2:0x44000000, mem1:0xde9ec000, mem1_size:8192,
mem2:0xdeb00000, mem2_size:131072
initial debug setting is 0x000A
using IRQ 177
requesting firmware image 'tiacx111c16'
acx: firmware image 'tiacx111c16' was not provided. Check your hotplug scripts
requesting firmware image 'tiacx111'
acx_write_fw (main/combined):0
acx_validate_fw (main/combined):0
cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
requesting firmware image 'tiacx111r16'
acx_write_fw (radio): 0
acx_validate_fw (radio): 0
initializing max packet templates
dump queue head (from card):
len: 24
tx_memory_block_address: 190E0
rx_memory_block_address: 135E0
tx1_queue address: 12B14
rx1_queue address: 127D4
NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112
CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01
AntennaID:00 Len:02 Data:01 02
PowerLevelID:01 Len:02 Data:001E 000A
DataRatesID:02 Len:05 Data:02 04 11 22 44
DomainID:03 Len:06 Data:10 20 30 31 32 41
ProductID:04 Len:09 Data:TI ACX100
ManufacturerID:05 Len:07 Data:TI Test
get_mask 0x00004182, set_mask 0x00000000
don't know how to get sensitivity for radio type 0x16
got sensitivity value 0
got antenna value 0x4A
got regulatory domain 0x10
get_mask 0x00000000, set_mask 0x00000000 - after update
new ratevector: 82 84 0B 0C 12 16 18 24 2C 30 48 60 6C
setting RXconfig to 2010:0FDD
acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 (Radia), EEPROM
version 0x05, uploaded firmware 'Rev 1.2.0.30' (0x03010101)
creating /proc entry driver/acx_wlan0
creating /proc entry driver/acx_wlan0_diag
creating /proc entry driver/acx_wlan0_eeprom
creating /proc entry driver/acx_wlan0_phy
acx v0.3.35: net device wlan0, driver compiled against wireless extensions 20
and Linux 2.6.17-2-686
USB module v0.3.35 initialized, probing for devices...
usbcore: registered new driver acx_usb
Adding 2176768k swap on /dev/hda7. Priority:-1 extents:1 across:2176768k
EXT3 FS on hda1, internal journal
loop: loaded (max 8 devices)
acpi-cpufreq: CPU0 - ACPI performance management activated.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-de...@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
pcmcia: This interface will soon be removed from the kernel; please expect
breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
details.
cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe02fffff
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: memory probe 0x40000000-0x41ffffff: excluding 0x40000000-0x41ffffff
cs: warning: no high memory space available!
cs: warning: no high memory space available!
[stripping wifi scans]
--- End Message ---
