Your message dated Thu, 12 Feb 2009 23:19:56 +0100 with message-id <20090212221956.ga6...@galadriel.inutil.org> and subject line Re: linux-image-2.6.25-2-686: cdc_ether USB based cable modem icmp works, tcp sockets connect but no data flows through has caused the Debian Bug report #494341, regarding linux-image-2.6.25-2-686: cdc_ether USB based cable modem icmp works, tcp sockets connect but no data flows through to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 494341: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=494341 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-image-2.6.25-2-686 Version: 2.6.25-7 Severity: important ping & DNS work, sockets establish connection, but data isn't recieved (w3m shows "Waiting for site.com...") This happens only when connected through the modem's USB interface. Same modem connected via ethernet works fine. With kernel version 2.6.18, the USB interface works fine aswell. With kernel version 2.6.22 the same problem is also present. This is the exact hardware description: [ 376.664239] hub 5-0:1.0: unable to enumerate USB device on port 4 [ 791.750037] usb 2-2: new full speed USB device using uhci_hcd and address 4 [ 376.712223] usb 2-2: configuration #1 chosen from 1 choice [ 376.721402] eth1: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC Ethernet Device, 00:18:9b:5b:c4:f6 [ 376.725294] usb 2-2: New USB device found, idVendor=069b, idProduct=0704 [ 376.725344] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 376.725388] usb 2-2: Product: Thomson USB CDC Device [ 376.725428] usb 2-2: Manufacturer: Thomson Inc. [ 376.725468] usb 2-2: SerialNumber: 00189B5BC4F6 -- Package-specific info: ** Version: Linux version 2.6.25-2-686 (Debian 2.6.25-7) (m...@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008 ** Command line: auto BOOT_IMAGE=Linux ro root=802 ** Not tainted ** Kernel log: [ 2.302755] usbcore: registered new interface driver usb-storage [ 2.302827] USB Mass Storage support registered. [ 2.305774] usb-storage: device found at 3 [ 2.305780] usb-storage: waiting for device to settle before scanning [ 2.400346] hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive [ 2.448196] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.448412] hdc: UDMA/33 mode selected [ 2.448620] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.469081] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 2.469363] Uniform CD-ROM driver Revision: 3.20 [ 2.671296] PM: Starting manual resume from disk [ 2.693417] ReiserFS: sda2: found reiserfs format "3.6" with standard journal [ 2.693496] ReiserFS: sda2: using ordered data mode [ 2.700941] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 2.701503] ReiserFS: sda2: checking transaction log (sda2) [ 2.780671] ReiserFS: sda2: replayed 20 transactions in 2 seconds [ 2.780979] ReiserFS: sda2: Using r5 hash to sort names [ 3.711221] usb-storage: device scan complete [ 3.897385] scsi 2:0:0:0: Direct-Access USB2.0 CardReader CF RW 0814 PQ: 0 ANSI: 0 [ 3.898379] scsi 2:0:0:1: Direct-Access USB2.0 CardReader Combo 0814 PQ: 0 ANSI: 0 [ 3.901026] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 3.902553] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 4.041695] input: PC Speaker as /class/input/input1 [ 4.107772] Real Time Clock Driver v1.12ac [ 4.727457] parport_pc 00:09: reported by Plug and Play ACPI [ 4.727563] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 4.818412] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.712711] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.214751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 5.214896] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460) [ 5.214991] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.379970] input: Power Button (FF) as /class/input/input2 [ 5.428422] ACPI: Power Button (FF) [PWRF] [ 5.428624] input: Sleep Button (CM) as /class/input/input3 [ 5.290598] Linux agpgart interface v0.103 [ 5.476441] ACPI: Sleep Button (CM) [SLPB] [ 5.371162] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 5.631549] agpgart: Detected an Intel 865 Chipset. [ 5.631994] agpgart: Detected 16252K stolen memory. [ 5.643579] agpgart: AGP aperture is 128M @ 0xf0000000 [ 5.691286] intel_rng: Firmware space is locked read-only. If you can't or [ 5.691290] intel_rng: don't want to disable this in firmware setup, and if [ 5.691293] intel_rng: you are certain that your system has a functional [ 5.691295] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 5.777143] eth1: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC Ethernet Device, 00:18:9b:5b:c4:f6 [ 5.777242] usbcore: registered new interface driver cdc_ether [ 6.033682] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 6.033791] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 6.340409] input: PS/2 Generic Mouse as /class/input/input4 [ 6.412425] intel8x0_measure_ac97_clock: measured 52043 usecs [ 6.412480] intel8x0: clocking to 48000 [ 6.880444] Adding 2988048k swap on /dev/sda6. Priority:-1 extents:1 across:2988048k [ 7.313584] loop: module loaded [ 8.740573] ReiserFS: sda5: found reiserfs format "3.6" with standard journal [ 8.740573] ReiserFS: sda5: using ordered data mode [ 8.740573] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 8.740573] ReiserFS: sda5: checking transaction log (sda5) [ 8.740573] ReiserFS: sda5: Using r5 hash to sort names [ 8.951622] NET: Registered protocol family 15 [ 9.156599] padlock: VIA PadLock Hash Engine not detected. [ 9.228053] padlock: VIA PadLock Hash Engine not detected. [ 9.378249] padlock: VIA PadLock not detected. [ 10.446905] NET: Registered protocol family 10 [ 10.447626] lo: Disabled Privacy Extensions [ 10.502501] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.678095] PPP generic driver version 2.4.2 [ 11.055610] padlock: VIA PadLock Hash Engine not detected. [ 11.093584] padlock: VIA PadLock Hash Engine not detected. [ 11.200031] padlock: VIA PadLock not detected. [ 11.333897] Initializing XFRM netlink socket [ 11.512877] PPP Deflate Compression module registered [ 13.900901] lp0: using parport0 (interrupt-driven). [ 13.913230] ppdev: user-space parallel port driver [ 14.660950] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 16.474536] [drm] Initialized drm 1.1.0 20060810 [ 16.480424] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 16.480439] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 16.480535] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 772.664865] usb 2-2: USB disconnect, address 3 [ 351.199989] eth1: unregister 'cdc_ether' usb-0000:00:1d.1-2, CDC Ethernet Device [ 351.870592] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 351.870592] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 352.230619] eth0: no IPv6 routers present [ 774.308956] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 774.313039] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 774.313266] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 376.664239] hub 5-0:1.0: unable to enumerate USB device on port 4 [ 791.750037] usb 2-2: new full speed USB device using uhci_hcd and address 4 [ 376.712223] usb 2-2: configuration #1 chosen from 1 choice [ 376.721402] eth1: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC Ethernet Device, 00:18:9b:5b:c4:f6 [ 376.725294] usb 2-2: New USB device found, idVendor=069b, idProduct=0704 [ 376.725344] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 376.725388] usb 2-2: Product: Thomson USB CDC Device [ 376.725428] usb 2-2: Manufacturer: Thomson Inc. [ 376.725468] usb 2-2: SerialNumber: 00189B5BC4F6 [ 423.491250] usb 2-2: USB disconnect, address 4 [ 423.491461] eth1: unregister 'cdc_ether' usb-0000:00:1d.1-2, CDC Ethernet Device [ 827.548384] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 827.552406] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 827.552625] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ** Loaded modules: Module Size Used by i915 27744 2 drm 72280 3 i915 ppdev 8676 0 lp 11012 0 video 19728 0 output 3712 1 video ac 4448 0 battery 8448 0 ppp_deflate 5632 0 xfrm_user 23488 2 xfrm4_tunnel 2880 0 tunnel4 3656 1 xfrm4_tunnel ipcomp 7688 0 esp4 7744 0 aead 7872 1 esp4 ah4 5984 0 ppp_async 10976 1 crc_ccitt 2176 1 ppp_async ppp_generic 25628 6 ppp_deflate,ppp_async slhc 5856 1 ppp_generic ipv6 241956 20 deflate 3712 0 zlib_deflate 17720 2 ppp_deflate,deflate zlib_inflate 14496 2 ppp_deflate,deflate ctr 4992 0 twofish 8480 0 twofish_common 13952 1 twofish camellia 19328 0 serpent 18848 0 blowfish 8544 0 des_generic 16832 0 cbc 4256 0 aes_i586 8256 0 aes_generic 29160 1 aes_i586 xcbc 5320 0 sha256_generic 11520 0 sha1_generic 2592 0 crypto_null 3232 0 crypto_blkcipher 18116 3 ctr,cbc,crypto_null af_key 34676 0 eeprom 7024 0 lm85 25380 0 hwmon_vid 3040 1 lm85 loop 16708 0 snd_intel8x0 31740 0 snd_ac97_codec 91300 1 snd_intel8x0 ac97_bus 1952 1 snd_ac97_codec snd_pcm_oss 37824 0 snd_mixer_oss 14880 1 snd_pcm_oss snd_pcm 68228 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 21320 1 snd_pcm snd 48772 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer cdc_ether 5760 0 psmouse 35920 0 intel_agp 25084 1 soundcore 7488 1 snd usbnet 17928 1 cdc_ether i2c_i801 9520 0 rng_core 4900 0 agpgart 31720 3 drm,intel_agp snd_page_alloc 9992 2 snd_intel8x0,snd_pcm button 8240 0 i2c_core 22548 3 eeprom,lm85,i2c_i801 serio_raw 6532 0 iTCO_wdt 11204 0 shpchp 29716 0 pci_hotplug 26980 1 shpchp evdev 11328 3 parport_pc 25860 1 parport 33868 3 ppdev,lp,parport_pc rtc 14272 0 pcspkr 3136 0 reiserfs 203584 2 ide_cd_mod 32864 0 cdrom 31872 1 ide_cd_mod usb_storage 76896 0 sd_mod 26072 4 piix 7176 0 [permanent] ide_pci_generic 4228 0 [permanent] ide_core 100312 3 ide_cd_mod,piix,ide_pci_generic ata_piix 20196 3 floppy 53284 0 ata_generic 8004 0 libata 142288 2 ata_piix,ata_generic e100 32716 0 mii 5248 2 usbnet,e100 scsi_mod 138668 3 usb_storage,sd_mod,libata dock 10448 1 libata ehci_hcd 32620 0 uhci_hcd 22352 0 usbcore 130032 6 cdc_ether,usbnet,usb_storage,ehci_hcd,uhci_hcd thermal 19100 0 processor 39660 1 thermal fan 5636 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) Subsystem: Intel Corporation Device [8086:4246] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at ec00 [size=8] Capabilities: <access denied> Kernel modules: intelfb 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) Subsystem: Intel Corporation Device [8086:4246] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) Subsystem: Intel Corporation Device [8086:4246] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at cc00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) Subsystem: Intel Corporation Device [8086:4246] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) Subsystem: Intel Corporation Device [8086:4246] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20) Subsystem: Intel Corporation Device [8086:4246] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: ff800000-ff8fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation Device [8086:4246] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corporation Device [8086:4246] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at e800 [size=8] Region 1: I/O ports at e400 [size=4] Region 2: I/O ports at e000 [size=8] Region 3: I/O ports at dc00 [size=4] Region 4: I/O ports at d800 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: Intel Corporation Device [8086:4246] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at c400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: Intel Corporation Device [8086:e001] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 01) Subsystem: Intel Corporation Device [8086:302f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at bc00 [size=64] Capabilities: <access denied> Kernel driver in use: e100 Kernel modules: eepro100, e100 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.25-2-686 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.25-2-686 recommends: ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.25-2-686 suggests: ii grub 0.97-44 GRand Unified Bootloader (Legacy v ii lilo 1:22.8-6 LInux LOader - The Classic OS load ii linux-doc-2.6.25 2.6.25-7 Linux kernel specific documentatio -- debconf-show failed
--- End Message ---
--- Begin Message ---On Mon, Jan 19, 2009 at 01:06:02AM +0100, AlbertoP wrote: > Package: linux-2.6 > Followup-For: Bug #494341 > > > >> ping & DNS work, sockets establish connection, but data isn't > >> recieved (w3m shows "Waiting for site.com...") > >> This happens only when connected through the modem's USB interface. > >> Same modem connected via ethernet works fine. > >> With kernel version 2.6.18, the USB interface works fine aswell. > >> With kernel version 2.6.22 the same problem is also present. > > Does this error still occur with more recent kernel versions, such > > as the current Lenny kernel? > > Now I'm using cdc_ether without problems, but I have a different router > even if I use the same connection and the same driver. Thanks, closing the bug then. Cheers, Moritz
--- End Message ---
