Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: important
Sometimes the boot process hangs, when starting Lenny. I have the root
system installed on a dm-crypt partition. It hangs soon after entering the
passphrase, when it has checked the ext3 filesystem, saying it is clean. But
after that it doesn't go on with
the bootprocess.
I have made a backup of the whole /var/log folder right after the oligatory
restart. If you need it, i will send it to you.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC
2009
** Command line:
root=/dev/mapper/hda9_crypt ro quiet
** Tainted: P (1)
** Kernel log:
[ 5.604063] hub 4-0:1.0: USB hub found
[ 5.604063] hub 4-0:1.0: 2 ports detected
[ 5.708255] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.708262] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.708266] usb usb4: Product: UHCI Host Controller
[ 5.708269] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 5.708272] usb usb4: SerialNumber: 0000:00:11.2
[ 5.708412] ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 5.708430] uhci_hcd 0000:00:11.3: UHCI Host Controller
[ 5.708492] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus
number 5
[ 5.708522] uhci_hcd 0000:00:11.3: irq 10, io base 0x0000e000
[ 5.708653] usb usb5: configuration #1 chosen from 1 choice
[ 5.708694] hub 5-0:1.0: USB hub found
[ 5.708708] hub 5-0:1.0: 2 ports detected
[ 5.812208] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.812214] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.812218] usb usb5: Product: UHCI Host Controller
[ 5.812221] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 5.812224] usb usb5: SerialNumber: 0000:00:11.3
[ 5.815460] ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 5.815482] uhci_hcd 0000:00:11.4: UHCI Host Controller
[ 5.815542] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus
number 6
[ 5.815575] uhci_hcd 0000:00:11.4: irq 10, io base 0x0000e400
[ 5.815729] usb usb6: configuration #1 chosen from 1 choice
[ 5.815774] hub 6-0:1.0: USB hub found
[ 5.815789] hub 6-0:1.0: 2 ports detected
[ 5.815898] 8139too Fast Ethernet driver 0.9.28
[ 5.916226] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.916232] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.916236] usb usb6: Product: UHCI Host Controller
[ 5.916239] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 5.916242] usb usb6: SerialNumber: 0000:00:11.4
[ 5.917356] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 5.918033] eth0: RealTek RTL8139 at 0xd400, 00:c1:26:0a:fa:ec, IRQ 10
[ 5.918037] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.920819] No dock devices found.
[ 5.931493] SCSI subsystem initialized
[ 5.943325] libata version 3.00 loaded.
[ 5.948087] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 5.993621] hda: max request size: 512KiB
[ 6.035510] hda: 976773168 sectors (500107 MB) w/16384KiB Cache,
CHS=60801/255/63
[ 6.059920] hda: cache flushes supported
[ 6.060008] hda: hda1 hda2 < hda5 hda6 hda7 hda8<6>usb 4-1: configuration
#1 chosen from 1 choice
[ 6.138719] usb 4-1: New USB device found, idVendor=046d, idProduct=08da
[ 6.138725] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.140630] hda9 >
[ 6.143787] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 6.143800] Uniform CD-ROM driver Revision: 3.20
[ 6.159220] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache
[ 6.676906] device-mapper: uevent: version 1.0.3
[ 6.676999] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 11.232788] kjournald starting. Commit interval 5 seconds
[ 11.232788] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.872730] udevd version 125 started
[ 14.446714] Linux agpgart interface v0.103
[ 14.464457] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[ 14.472430] agpgart: AGP aperture is 128M @ 0xd0000000
[ 14.578178] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.596176] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.136231] input: Power Button (FF) as /class/input/input1
[ 15.168147] ACPI: Power Button (FF) [PWRF]
[ 15.168316] input: Power Button (CM) as /class/input/input2
[ 15.200140] ACPI: Power Button (CM) [PWRB]
[ 15.200309] input: Sleep Button (CM) as /class/input/input3
[ 15.224192] ACPI: Sleep Button (CM) [SLPB]
[ 15.600369] NET: Registered protocol family 23
[ 16.643636] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 16.724233] input: PC Speaker as /class/input/input4
[ 16.962077] Linux video capture interface: v2.00
[ 17.014119] usbcore: registered new interface driver snd-usb-audio
[ 17.019142] gspca: USB GSPCA camera found.(ZC3XX)
[ 17.019206] gspca: [spca5xx_probe:4275] Camera type JPEG
[ 17.302004] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201,
speed 864kHz
[ 17.709563] gspca: [zc3xx_config:669] Find Sensor HV7131R(c)
[ 17.714533] gspca: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160
minh 120
[ 17.714720] usbcore: registered new interface driver gspca
[ 17.714781] gspca: gspca driver 01.00.20 registered
[ 17.826524] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5
[ 17.857389] parport_pc 00:09: reported by Plug and Play ACPI
[ 17.857508] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.184472] EXT3 FS on dm-0, internal journal
[ 19.688970] loop: module loaded
[ 20.190804] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 21.583480] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 23.951406] NET: Registered protocol family 10
[ 23.952143] lo: Disabled Privacy Extensions
[ 24.161136] lp0: using parport0 (interrupt-driven).
[ 24.184410] ppdev: user-space parallel port driver
[ 29.222765] gspca: [spca5xx_set_light_freq:1932] Sensor currently not
support light frequency banding filters.
[ 29.222951] gspca: [gspca_set_isoc_ep:945] ISO EndPoint found 0x81
AlternateSet 7
[ 34.567250] nvidia: module license 'NVIDIA' taints kernel.
[ 34.830147] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 34.830771] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.07 Wed Jul
2 12:17:43 PDT 2008
[ 34.932137] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 34.932168] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 34.932228] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 42.757067] tun: Universal TUN/TAP device driver, 1.6
[ 42.757079] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 42.761335] tun0: Disabled Privacy Extensions
[ 47.412037] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
tun 8292 1
nvidia 4701104 22
ppdev 6468 0
lp 8164 0
ipv6 235300 14
cpufreq_ondemand 6476 0
cpufreq_stats 3776 0
freq_table 4224 2 cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 5960 0
cpufreq_powersave 1856 0
cpufreq_userspace 3172 0
nls_utf8 1760 1
nls_cp437 5568 1
vfat 9152 1
fat 40864 1 vfat
nls_base 6820 4 nls_utf8,nls_cp437,vfat,fat
ext2 54440 1
loop 12748 0
ns558 3712 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
psmouse 32336 0
gspca 639888 0
serio_raw 4740 0
videodev 27520 1 gspca
snd_usb_audio 70272 1
v4l1_compat 12260 1 videodev
snd_usb_lib 13440 1 snd_usb_audio
pcspkr 2432 0
snd_cmipci 28992 1
gameport 10700 3 ns558,snd_cmipci
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 3 snd_usb_audio,snd_cmipci,snd_pcm_oss
snd_page_alloc 7816 1 snd_pcm
snd_opl3_lib 9344 1 snd_cmipci
snd_hwdep 6212 2 snd_usb_audio,snd_opl3_lib
snd_mpu401_uart 6368 1 snd_cmipci
snd_seq_dummy 2660 0
i2c_viapro 6836 0
i2c_core 19828 2 nvidia,i2c_viapro
via_ircc 15732 0
snd_seq_oss 24992 0
irda 95480 1 via_ircc
snd_seq_midi 5728 0
crc_ccitt 2080 1 irda
snd_rawmidi 18496 3 snd_usb_lib,snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 3 snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 6380 6
snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
button 6096 0
snd 45604 17
snd_usb_audio,snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
shpchp 25528 0
pci_hotplug 23460 1 shpchp
via_agp 7744 1
agpgart 28776 2 nvidia,via_agp
evdev 8000 4
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 2 ext2,ext3
sha256_generic 11360 0
aes_i586 7744 2
aes_generic 29256 1 aes_i586
cbc 3264 1
dm_crypt 11172 1
dm_mod 46184 3 dm_crypt
crypto_blkcipher 15236 3 cbc,dm_crypt
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 4
ata_generic 4676 0
libata 140384 1 ata_generic
scsi_mod 129356 1 libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
8139too 20320 0
floppy 47716 0
uhci_hcd 18672 0
via82cxxx 6948 0 [permanent]
ide_core 96168 4 ide_cd_mod,ide_disk,ide_pci_generic,via82cxxx
8139cp 16800 0
mii 4896 2 8139too,8139cp
ehci_hcd 28428 0
ohci_hcd 18500 0
usbcore 118160 7
gspca,snd_usb_audio,snd_usb_lib,uhci_hcd,ehci_hcd,ohci_hcd
thermal 15228 1
processor 32576 2 thermal
fan 4164 1
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333] [1106:3099]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:09.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:09.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at e2001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:09.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
(prog-if 20 [EHCI])
Subsystem: Device [1838:1074]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at e2002000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0b.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738
[13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
[13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=256]
Capabilities: <access denied>
Kernel driver in use: C-Media PCI
Kernel modules: snd-cmipci
00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter [11f6:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at e2003000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
[1106:3074]
Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: i2c-viapro, via-ircc
00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at d800 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV25 [GeForce4 Ti
4200] [10de:0253] (rev a3) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at dc000000 (32-bit, prefetchable) [size=512K]
[virtual] Expansion ROM at dc080000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
