Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-13
Severity: grave
Justification: renders package unusable
Obtained VirtualBox deb from repository at its own website. On install
the install script pulled the kernel modules straight out of the kernel
and crashed the whole machine. Already have a bug with VirtualBox.
However should stock (I assume production grade) kernels set the ability
to force modules loading/unloading?
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
Data loss: Had to recover a running iceweasel config from backup. (Not
critical, but could have been worse.)
I realise that this could be graded lower, but not sure where. The
criteria for data loss seem to push it near the top of the tree.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC
2009
** Command line:
root=UUID=aaaffb4a-1d68-4980-aac8-ee1abfc83e8a ro
** Tainted: P (1)
** Kernel log:
[ 15.977622] EXT3-fs: sda2: 13 orphan inodes deleted
[ 15.977622] EXT3-fs: recovery complete.
[ 16.079167] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.032257] udevd version 125 started
[ 17.404056] input: Power Button (FF) as /class/input/input2
[ 17.470598] ACPI: Power Button (FF) [PWRF]
[ 17.470701] input: Power Button (CM) as /class/input/input3
[ 17.524102] ACPI: Power Button (CM) [PWRB]
[ 17.541068] ACPI: WMI: Mapper loaded
[ 17.593489] input: PC Speaker as /class/input/input4
[ 17.679661] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) ->
IRQ 18
[ 18.062871] ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 18.062871] ice1712: Using board model M Audio Delta 1010LT
[ 18.082871] invalid CS8427 signature 0x0: let me try again...
[ 18.534672] input: ImExPS/2 Generic Explorer Mouse as /class/input/input5
[ 19.164517] EXT3 FS on sda2, internal journal
[ 19.976906] loop: module loaded
[ 43.300926] kjournald starting. Commit interval 5 seconds
[ 43.300926] EXT3 FS on dm-0, internal journal
[ 43.316946] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.300926] kjournald starting. Commit interval 5 seconds
[ 43.330006] EXT3 FS on dm-2, internal journal
[ 43.330097] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.336985] kjournald starting. Commit interval 5 seconds
[ 43.340960] EXT3 FS on dm-3, internal journal
[ 43.340960] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.607987] Adding 26214392k swap on
/dev/mapper/belegost_vg1-belegost_vg1--swap. Priority:-1 extents:1
across:26214392k
[ 45.068831] r8169: eth0: link up
[ 45.528600] NET: Registered protocol family 10
[ 45.528600] lo: Disabled Privacy Extensions
[ 45.706155] RPC: Registered udp transport module.
[ 45.706155] RPC: Registered tcp transport module.
[ 46.349459] pnp: the driver 'parport_pc' has been registered
[ 46.349459] lp: driver loaded but no devices found
[ 46.379047] ppdev: user-space parallel port driver
[ 49.156473] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 49.156473] vboxdrv: Successfully done.
[ 49.156473] vboxdrv: Found 8 processor cores.
[ 49.156473] VBoxDrv: dbg - g_abExecMemory=ffffffffa038d900
[ 49.156473] vboxdrv: fAsync=0 offMin=0x8cc offMax=0x230c
[ 49.156473] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 49.156473] vboxdrv: Successfully loaded version 2.1.0 (interface
0x000a0008).
[ 54.382668] nvidia: module license 'NVIDIA' taints kernel.
[ 54.750759] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 54.750759] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 54.751764] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed
Jun 4 23:40:50 PDT 2008
[ 57.548390] eth0: no IPv6 routers present
[ 162.125932] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 162.125932] vboxdrv: Successfully done.
[ 162.125932] vboxdrv: Found 8 processor cores.
[ 162.125932] VBoxDrv: dbg - g_abExecMemory=ffffffffa038d920
[ 162.125932] vboxdrv: fAsync=0 offMin=0x8a2 offMax=0x151d
[ 162.125932] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 162.125932] vboxdrv: Successfully loaded version 2.1.2 (interface
0x000a0009).
[ 162.352263] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0cf9b40
[ 211.237965] usb 8-2: new high speed USB device using ehci_hcd and address 2
[ 211.480012] usb 8-2: configuration #1 chosen from 1 choice
[ 211.480012] usb 8-2: New USB device found, idVendor=152d, idProduct=2336
[ 211.480012] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 211.480012] usb 8-2: Product: JM20336 SATA, USB Combo
[ 211.480012] usb 8-2: Manufacturer: JMicron
[ 211.480012] usb 8-2: SerialNumber: 131706999888
[ 211.532903] Initializing USB Mass Storage driver...
[ 211.528211] scsi6 : SCSI emulation for USB Mass Storage devices
[ 211.532884] usb-storage: device found at 2
[ 211.532884] usb-storage: waiting for device to settle before scanning
[ 211.528211] usbcore: registered new interface driver usb-storage
[ 211.528211] USB Mass Storage support registered.
[ 219.508966] usb-storage: device scan complete
[ 219.508966] scsi 6:0:0:0: Direct-Access SAMSUNG HD103UJ
PQ: 0 ANSI: 2 CCS
[ 219.508966] scsi 6:0:0:1: Direct-Access SAMSUNG HD103UJ
PQ: 0 ANSI: 2 CCS
[ 219.508966] sd 6:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205
MB)
[ 219.510980] sd 6:0:0:0: [sdf] Write Protect is off
[ 219.510985] sd 6:0:0:0: [sdf] Mode Sense: 00 38 00 00
[ 219.510988] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 219.514602] sd 6:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205
MB)
[ 219.514602] sd 6:0:0:0: [sdf] Write Protect is off
[ 219.514602] sd 6:0:0:0: [sdf] Mode Sense: 00 38 00 00
[ 219.514602] sd 6:0:0:0: [sdf] Assuming drive cache: write through
[ 219.514602] sdf: sdf1
[ 219.522601] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 219.522601] sd 6:0:0:1: [sdg] 1953525168 512-byte hardware sectors (1000205
MB)
[ 219.524595] sd 6:0:0:1: [sdg] Write Protect is off
[ 219.524595] sd 6:0:0:1: [sdg] Mode Sense: 00 38 00 00
[ 219.524595] sd 6:0:0:1: [sdg] Assuming drive cache: write through
[ 219.528088] sd 6:0:0:1: [sdg] 1953525168 512-byte hardware sectors (1000205
MB)
[ 219.614598] sd 6:0:0:1: [sdg] Write Protect is off
[ 219.614598] sd 6:0:0:1: [sdg] Mode Sense: 00 38 00 00
[ 219.614598] sd 6:0:0:1: [sdg] Assuming drive cache: write through
[ 219.614598] sdg: sdg1
[ 219.622597] sd 6:0:0:1: [sdg] Attached SCSI disk
[ 223.403954] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 223.424014] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 1656.254455] UDF-fs: No VRS found
[ 1656.399394] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1661.194858] ISO 9660 Extensions: RRIP_1991A
[ 2933.598281] warning: `VBoxHeadless' uses 32-bit capabilities (legacy support
in use)
[ 2934.582588] device eth0 entered promiscuous mode
[ 6375.278869] rhythmbox[5757]: segfault at 0 ip 7fcb7635f271 sp 7fff850e44b0
error 4 in libgstbase-0.10.so.0.17.0[7fcb76350000+2b000]
[95984.276425] usb 8-2: USB disconnect, address 2
** Loaded modules:
Module Size Used by
isofs 35880 0
zlib_inflate 18944 1 isofs
udf 75944 0
crc_itu_t 6528 1 udf
usb_storage 94528 0
vboxnetflt 90220 0
vboxdrv 1684396 2 vboxnetflt
nvidia 8105072 24
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
nfs 251696 5
lockd 68560 1 nfs
nfs_acl 7552 1 nfs
sunrpc 197480 21 nfs,lockd,nfs_acl
acpi_cpufreq 11792 0
cpufreq_stats 9120 0
cpufreq_ondemand 11792 8
freq_table 9344 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 6400 0
cpufreq_userspace 8452 0
ipv6 288328 28
cpufreq_conservative 11784 0
nls_utf8 6272 1
nls_cp437 11136 1
vfat 14976 1
fat 51128 1 vfat
nls_base 12932 6 isofs,udf,nls_utf8,nls_cp437,vfat,fat
sbp2 25356 0
loop 19468 0
snd_ice1712 65380 7
snd_ice17xx_ak4xxx 8064 1 snd_ice1712
snd_ak4xxx_adda 13056 2 snd_ice1712,snd_ice17xx_ak4xxx
snd_cs8427 12672 1 snd_ice1712
snd_ac97_codec 115416 1 snd_ice1712
snd_pcm 81672 5 snd_ice1712,snd_ac97_codec
snd_page_alloc 13072 1 snd_pcm
ac97_bus 6272 1 snd_ac97_codec
snd_i2c 9984 2 snd_ice1712,snd_cs8427
snd_mpu401_uart 11776 1 snd_ice1712
snd_seq_midi 11072 0
snd_seq_midi_event 11904 1 snd_seq_midi
snd_rawmidi 26784 2 snd_mpu401_uart,snd_seq_midi
snd_seq 54304 2 snd_seq_midi,snd_seq_midi_event
snd_timer 25744 5 snd_pcm,snd_seq
snd_seq_device 11668 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 63688 19
snd_ice1712,snd_ak4xxx_adda,snd_cs8427,snd_ac97_codec,snd_pcm,snd_i2c,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 42268 0
i2c_i801 13596 0
soundcore 12064 1 snd
serio_raw 9860 0
i2c_core 27936 2 nvidia,i2c_i801
pcspkr 7040 0
wmi 11712 0
button 11680 0
evdev 14208 3
ext3 125072 4
jbd 51240 1 ext3
mbcache 12804 1 ext3
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_snapshot 19400 0
dm_mod 58864 13 dm_mirror,dm_log,dm_snapshot
sd_mod 29376 12
ide_cd_mod 36360 0
cdrom 37928 1 ide_cd_mod
ata_generic 10116 0
ata_piix 22660 7
ahci 33036 0
libata 165472 3 ata_generic,ata_piix,ahci
scsi_mod 160760 4 usb_storage,sbp2,sd_mod,libata
dock 14112 1 libata
ohci1394 32564 0
ieee1394 93816 2 sbp2,ohci1394
jmicron 6912 0 [permanent]
r8169 31492 0
floppy 61672 0
ehci_hcd 36108 0
ide_pci_generic 9220 0 [permanent]
ide_core 128284 3 ide_cd_mod,jmicron,ide_pci_generic
uhci_hcd 25760 0
thermal 22688 0
processor 42304 2 acpi_cpufreq,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture I/O Hub to
ESI Port [8086:3405] (rev 12)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 1 [8086:3408] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:03.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 3 [8086:340a] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:05.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 5 [8086:340c] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fd200000-fd2fffff
Prefetchable memory behind bridge: 00000000fcf00000-00000000fcffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 7 [8086:340e] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:09.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 9 [8086:3410] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link
Layer Registers Port 0 [8086:3425] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:10.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and
Protocol Layer Registers Port 0 [8086:3426] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:11.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link
Layer Registers Port 1 [8086:3427] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:11.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and
Protocol Layer Registers Port 1 [8086:3428] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:13.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC
Interrupt Controller [8086:342d] (rev 12) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:14.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub System
Management Registers [8086:342e] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub GPIO and
Scratch Pad Registers [8086:3422] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Control
Status and RAS Registers [8086:3423] (rev 12) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:15.0 PIC [0800]: Intel Corporation Trusted Execution Technology Registers
[8086:342f] (rev 12) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fe00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fd00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: fd800000-fd8fffff
Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 2 [8086:3a42] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fd600000-fd6fffff
Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fd400000-fd4fffff
Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fb00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fa00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fd100000-fd1fffff
Prefetchable memory behind bridge: 00000000fd000000-00000000fd0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f900 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f700 [size=8]
Region 3: I/O ports at f600 [size=4]
Region 4: I/O ports at f500 [size=16]
Region 5: I/O ports at f400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f200 [size=8]
Region 1: I/O ports at f100 [size=4]
Region 2: I/O ports at f000 [size=8]
Region 3: I/O ports at ef00 [size=4]
Region 4: I/O ports at ee00 [size=16]
Region 5: I/O ports at ed00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_piix, ata_generic
02:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0641]
(rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Device [3842:c945]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 8f00 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
07:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 5: Memory at fd6fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
07:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 5f00 [size=8]
Region 1: I/O ports at 5e00 [size=4]
Region 2: I/O ports at 5d00 [size=8]
Region 3: I/O ports at 5c00 [size=4]
Region 4: I/O ports at 5b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: jmicron, ide-pci-generic, ata_generic
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 1271
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fd3ff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fd3f8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fd300000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
09:01.0 Multimedia audio controller [0401]: VIA Technologies Inc. ICE1712
[Envy24] PCI Multi-Channel I/O Controller [1412:1712] (rev 02)
Subsystem: VIA Technologies Inc. M-Audio Delta 66 [1412:d632]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 9f00 [size=32]
Region 1: I/O ports at 9e00 [size=16]
Region 2: I/O ports at 9d00 [size=16]
Region 3: I/O ports at 9c00 [size=64]
Capabilities: <access denied>
Kernel driver in use: ICE1712
Kernel modules: snd-ice1712
09:06.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd1ff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fd1f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64:
true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
