Subject: linux-image-2.6.26-1-486: rt73usb driver randomly crashes Package: linux-image-2.6.26-1-486 Version: 2.6.26-12 Severity: important
The rt73usb kernel module randomly crases, I found the informaton about crash in syslog: Jan 3 03:53:10 darkstar kernel: [22562.538975] usb 1-2: USB disconnect, address 2 Jan 3 03:53:10 darkstar kernel: [22562.548547] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548641] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548718] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548793] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548872] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548998] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.549239] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.549378] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.549515] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. Jan 3 03:53:11 darkstar kernel: [22562.904061] usb 1-2: new high speed USB device using ehci_hcd and address 3 Jan 3 03:53:26 darkstar kernel: [22577.996151] hub 1-0:1.0: unable to enumerate USB device on port 2 Jan 3 03:53:26 darkstar kernel: [22578.376059] usb 2-2: new full speed USB device using uhci_hcd and address 2 Jan 3 03:53:26 darkstar kernel: [22578.563784] usb 2-2: not running at top speed; connect to a high speed hub Jan 3 03:53:27 darkstar kernel: [22578.685201] usb 2-2: configuration #1 chosen from 1 choice Jan 3 03:53:27 darkstar kernel: [22578.954948] phy1: Selected rate control algorithm 'pid' Jan 3 03:53:27 darkstar kernel: [22578.956841] Registered led device: rt73usb-phy1:radio Jan 3 03:53:27 darkstar kernel: [22578.956957] Registered led device: rt73usb-phy1:assoc Jan 3 03:53:27 darkstar kernel: [22578.957058] Registered led device: rt73usb-phy1:quality Jan 3 03:53:27 darkstar kernel: [22579.031496] usb 2-2: New USB device found, idVendor=148f, idProduct=2573 Jan 3 03:53:27 darkstar kernel: [22579.031528] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 3 03:53:27 darkstar kernel: [22579.031548] usb 2-2: Product: 802.11 bg WLAN Jan 3 03:53:27 darkstar kernel: [22579.031563] usb 2-2: Manufacturer: Ralink -- Package-specific info: ** Version: Linux version 2.6.26-1-486 (Debian 2.6.26-12) (wa...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 Mon Dec 15 17:32:01 UTC 2008 ** Command line: root=/dev/hdc1 ro quiet ** Not tainted ** Kernel log: [ 7.850962] uhci_hcd 0000:00:10.2: VIA VLink IRQ fixup, from 9 to 11 [ 7.851015] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 7.851235] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 7.851296] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000dc00 [ 7.851880] usb usb4: configuration #1 chosen from 1 choice [ 7.852106] hub 4-0:1.0: USB hub found [ 7.852171] hub 4-0:1.0: 2 ports detected [ 7.880095] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 7.956631] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.956657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.956678] usb usb4: Product: UHCI Host Controller [ 7.956694] usb usb4: Manufacturer: Linux 2.6.26-1-486 uhci_hcd [ 7.956711] usb usb4: SerialNumber: 0000:00:10.2 [ 8.199684] usb 1-2: configuration #1 chosen from 1 choice [ 8.200592] usb 1-2: New USB device found, idVendor=148f, idProduct=2573 [ 8.200614] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.200634] usb 1-2: Product: 802.11 bg WLAN [ 8.200649] usb 1-2: Manufacturer: Ralink [ 8.824111] libata version 3.00 loaded. [ 8.950909] Uniform Multi-Platform E-IDE driver [ 8.950936] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 9.198163] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 [ 9.198237] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 9.198273] VIA_IDE 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11 [ 9.198326] VP_IDE: not 100% native mode: will probe irqs later [ 9.198393] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [ 9.198429] ide0: BM-DMA at 0xe000-0xe007 [ 9.198464] ide1: BM-DMA at 0xe008-0xe00f [ 9.198491] Probing IDE interface ide0... [ 9.772260] Probing IDE interface ide1... [ 10.112775] Marking TSC unstable due to: TSC halts in idle. [ 10.188165] hdc: ST380215A, ATA DISK drive [ 10.860253] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 10.860486] hdc: UDMA/100 mode selected [ 10.860771] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 10.860999] ide1 at 0x170-0x177,0x376 on irq 15 [ 10.982991] hdc: max request size: 512KiB [ 11.032225] hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63 [ 11.056437] hdc: cache flushes supported [ 11.056437] hdc: hdc1 hdc2 < hdc5 hdc6 > [ 11.492534] PM: Starting manual resume from disk [ 11.555590] ReiserFS: hdc1: found reiserfs format "3.6" with standard journal [ 11.555631] ReiserFS: hdc1: using ordered data mode [ 11.559725] ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 11.568448] ReiserFS: hdc1: checking transaction log (hdc1) [ 21.268393] ReiserFS: hdc1: replayed 2153 transactions in 9 seconds [ 21.284336] ReiserFS: hdc1: Using r5 hash to sort names [ 23.868749] udevd version 125 started [ 31.579830] Linux agpgart interface v0.103 [ 31.646004] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.915689] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.950701] agpgart: Detected VIA CLE266 chipset [ 31.951750] agpgart: AGP aperture is 4M @ 0xe6000000 [ 33.377627] parport_pc 00:0a: reported by Plug and Play ACPI [ 33.377689] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 34.974605] phy0: Selected rate control algorithm 'pid' [ 37.591279] input: Power Button (FF) as /class/input/input1 [ 37.743385] ACPI: Power Button (FF) [PWRF] [ 37.743750] input: Power Button (CM) as /class/input/input2 [ 37.765328] ACPI: Power Button (CM) [PWRB] [ 41.402529] Registered led device: rt73usb-phy0:radio [ 41.402651] Registered led device: rt73usb-phy0:assoc [ 41.402751] Registered led device: rt73usb-phy0:quality [ 41.403445] usbcore: registered new interface driver rt73usb [ 41.792116] usbcore: registered new interface driver rt2500usb [ 44.167805] Adding 2000052k swap on /dev/hdc5. Priority:-1 extents:1 across:2000052k [ 51.151787] loop: module loaded [ 51.256506] vt1211: Found VT1211 chip at 0x6000, revision 2 [ 55.003625] JFS: nTxBlock = 3904, nTxLock = 31233 [ 56.427281] firmware: requesting rt73.bin [ 59.058000] wlan0: Initial auth_alg=0 [ 59.058032] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 59.059789] wlan0: RX authentication from 00:18:39:a7:13:50 (alg=0 transaction=2 status=0) [ 59.059811] wlan0: authenticated [ 59.059831] wlan0: associate with AP 00:18:39:a7:13:50 [ 59.063516] wlan0: RX AssocResp from 00:18:39:a7:13:50 (capab=0x411 status=0 aid=3) [ 59.063538] wlan0: associated [ 59.063591] wlan0: switched to short barker preamble (BSSID=00:18:39:a7:13:50) [ 62.954327] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1842.760286] wlan0: CTS protection enabled (BSSID=00:18:39:a7:13:50) [ 1854.843529] wlan0: CTS protection disabled (BSSID=00:18:39:a7:13:50) [ 3607.064074] wlan0: No ProbeResp from current AP 00:18:39:a7:13:50 - assume out of range [ 3608.096643] wlan0: Initial auth_alg=0 [ 3608.096678] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3608.105515] wlan0: Initial auth_alg=0 [ 3608.105547] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3608.304074] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3608.504074] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3608.704070] wlan0: authentication with AP 00:18:39:a7:13:50 timed out [ 3619.032703] wlan0: Initial auth_alg=0 [ 3619.032738] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3619.041322] wlan0: Initial auth_alg=0 [ 3619.041354] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3619.041425] wlan0: RX authentication from 00:18:39:a7:13:50 (alg=0 transaction=2 status=0) [ 3619.041445] wlan0: authenticated [ 3619.041467] wlan0: associate with AP 00:18:39:a7:13:50 [ 3619.044139] wlan0: authentication frame received from 00:18:39:a7:13:50, but not in authenticate state - ignored [ 3619.046753] wlan0: RX ReassocResp from 00:18:39:a7:13:50 (capab=0x411 status=0 aid=3) [ 3619.046779] wlan0: associated [ 3619.046833] wlan0: switched to short barker preamble (BSSID=00:18:39:a7:13:50) ** Loaded modules: Module Size Used by xt_tcpudp 2816 1 iptable_filter 2560 1 ip_tables 9616 1 iptable_filter x_tables 12932 2 xt_tcpudp,ip_tables jfs 148060 1 nls_base 6528 1 jfs vt1211 13192 0 hwmon_vid 2560 1 vt1211 loop 12428 0 rt2500usb 19968 0 arc4 1792 2 ecb 2560 2 crypto_blkcipher 14724 1 ecb button 6032 0 rt73usb 22400 0 crc_itu_t 2048 1 rt73usb rt2x00usb 9728 2 rt2500usb,rt73usb rt2x00lib 22272 3 rt2500usb,rt73usb,rt2x00usb firmware_class 6656 1 rt2x00lib rfkill 5524 1 rt2x00lib led_class 3844 1 rt2x00lib input_polldev 3720 1 rt2x00lib i2c_viapro 6804 0 parport_pc 22436 0 parport 30408 1 parport_pc i2c_core 19728 1 i2c_viapro mac80211 137756 2 rt2x00usb,rt2x00lib cfg80211 21384 2 rt2x00lib,mac80211 via_agp 7680 1 shpchp 25496 0 pci_hotplug 23204 1 shpchp agpgart 28336 1 via_agp evdev 7808 0 reiserfs 187008 1 ide_disk 10496 4 ide_pci_generic 3844 0 [permanent] via82cxxx 6916 0 [permanent] ide_core 95144 3 ide_disk,ide_pci_generic,via82cxxx ata_generic 4612 0 libata 141088 1 ata_generic uhci_hcd 18448 0 ehci_hcd 28300 0 scsi_mod 129804 1 libata dock 8076 1 libata usbcore 117616 6 rt2500usb,rt73usb,rt2x00usb,uhci_hcd,ehci_hcd via_rhine 18184 0 mii 4864 1 via_rhine thermal 15132 0 processor 28080 2 thermal thermal_sys 10784 2 thermal,processor -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-486 Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-486 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92n tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-486 recommends no packages. Versions of packages linux-image-2.6.26-1-486 suggests: ii grub 0.97-47lenny1 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
