Package: linux-image-2.6.26-1-amd64
Followup-For: Bug #481125
Hello,
I could not reproduce this bug for at least one month (maybe 2), so I consider
it to be fixed. I'm afraid I can't say exaclty since when it is fixed.
Thanks for your help,
tibob
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-11) (wa...@debian.org) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Nov 26 18:26:02 UTC
2008
** Command line:
root=/dev/sda5 ro
** Not tainted
** Kernel log:
[ 5.081117] udevd version 125 started
[ 5.119417] usb 2-1: New USB device found, idVendor=04b4, idProduct=6560
[ 5.119475] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.353086] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 5.357440] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 5.385229] input: Power Button (FF) as /class/input/input1
[ 5.440218] ACPI: Power Button (FF) [PWRF]
[ 5.440308] input: Power Button (CM) as /class/input/input2
[ 5.506589] ACPI: Power Button (CM) [PWRB]
[ 5.541429] usb 3-2: configuration #1 chosen from 1 choice
[ 5.545428] usb 3-2: New USB device found, idVendor=04b8, idProduct=010f
[ 5.545428] usb 3-2: New USB device strings: Mfr=64, Product=77,
SerialNumber=0
[ 5.545428] usb 3-2: Product: EPSON Scanner 010F
[ 5.545428] usb 3-2: Manufacturer: EPSON
[ 5.685427] Initializing USB Mass Storage driver...
[ 5.693426] scsi4 : SCSI emulation for USB Mass Storage devices
[ 5.697428] usb-storage: device found at 3
[ 5.697428] usb-storage: waiting for device to settle before scanning
[ 5.745813] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 5.745925] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[ 5.749429] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.756167] usb 2-1.1: new low speed USB device using uhci_hcd and address 3
[ 5.894646] usb 2-1.1: configuration #1 chosen from 1 choice
[ 5.898655] usb 2-1.1: New USB device found, idVendor=413c, idProduct=3012
[ 5.898655] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.898655] usb 2-1.1: Product: Dell USB Optical Mouse
[ 5.898655] usb 2-1.1: Manufacturer: Dell
[ 6.109971] usb 2-1.2: new low speed USB device using uhci_hcd and address 4
[ 6.120371] input: PC Speaker as /class/input/input3
[ 6.150634] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) ->
IRQ 18
[ 6.247824] usb 2-1.2: configuration #1 chosen from 1 choice
[ 6.250804] usb 2-1.2: New USB device found, idVendor=413c, idProduct=2003
[ 6.250851] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 6.250907] usb 2-1.2: Product: Dell USB Keyboard
[ 6.250953] usb 2-1.2: Manufacturer: Dell
[ 6.254821] usbcore: registered new interface driver usb-storage
[ 6.254869] USB Mass Storage support registered.
[ 6.255175] usbcore: registered new interface driver hiddev
[ 6.267825] input: Dell Dell USB Optical Mouse as /class/input/input4
[ 6.320929] input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse]
on usb-0000:00:1a.1-1.1
[ 6.335845] input: Dell Dell USB Keyboard as /class/input/input5
[ 6.375781] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 6.375781] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 6.378972] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard]
on usb-0000:00:1a.1-1.2
[ 6.379172] usbcore: registered new interface driver usbhid
[ 6.379218] usbhid: v2.6:USB HID core driver
[ 7.487477] Adding 1951856k swap on /dev/sda9. Priority:-1 extents:1
across:1951856k
[ 7.918134] EXT3 FS on sda5, internal journal
[ 8.655131] loop: module loaded
[ 8.673993] coretemp coretemp.0: Using relative temperature scale!
[ 8.674072] coretemp coretemp.1: Using relative temperature scale!
[ 8.691785] it87: Found IT8718F chip at 0x290, revision 3
[ 8.691838] it87: in3 is VCC (+5V)
[ 8.691880] it87: in7 is VCCH (+5V Stand-By)
[ 8.727453] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 8.727456] vboxdrv: Successfully done.
[ 8.727457] vboxdrv: Found 2 processor cores.
[ 8.727464] vboxdrv: fAsync=0 u64DiffCores=1232.
[ 8.727488] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 8.727545] vboxdrv: Successfully loaded version 1.6.2_OSE (interface
0x00070002).
[ 10.505445] fuse init (API version 7.9)
[ 10.566293] kjournald starting. Commit interval 5 seconds
[ 10.566314] EXT3 FS on sda6, internal journal
[ 10.566397] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.582354] kjournald starting. Commit interval 5 seconds
[ 10.586294] EXT3 FS on sda7, internal journal
[ 10.586294] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.607874] kjournald starting. Commit interval 5 seconds
[ 10.609112] EXT3 FS on sda8, internal journal
[ 10.609112] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.623885] kjournald starting. Commit interval 5 seconds
[ 10.626304] EXT3 FS on sda10, internal journal
[ 10.626304] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.416786] usb-storage: device scan complete
[ 11.416786] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00
PQ: 0 ANSI: 0
[ 11.416786] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01
PQ: 0 ANSI: 0
[ 11.416786] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02
PQ: 0 ANSI: 0
[ 11.416786] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03
PQ: 0 ANSI: 0
[ 11.416786] scsi 4:0:0:4: Direct-Access Generic Mini SD Reader 1.06
PQ: 0 ANSI: 0
[ 11.420893] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 11.420893] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 11.420893] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 11.420893] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 11.459046] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 11.459046] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 11.459165] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 11.459237] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 11.462626] sd 4:0:0:4: [sdf] Attached SCSI removable disk
[ 11.462626] sd 4:0:0:4: Attached scsi generic sg6 type 0
[ 12.428175] NET: Registered protocol family 10
[ 12.428175] lo: Disabled Privacy Extensions
[ 12.797177] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.556832] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 14.556832] eth0: 10/100 speed: disabling TSO
[ 14.556832] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.615386] pnp: the driver 'parport_pc' has been registered
[ 17.619375] lp: driver loaded but no devices found
[ 17.635379] ppdev: user-space parallel port driver
[ 22.302583] warning: `proftpd' uses 32-bit capabilities (legacy support in
use)
[ 25.740066] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
binfmt_misc 13580 1
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
ipv6 288328 34
fuse 53184 1
vboxdrv 1658672 0
it87 28952 0
hwmon_vid 7296 1 it87
coretemp 11008 0
loop 19468 0
snd_hda_intel 434776 1
snd_pcm_oss 41760 0
snd_pcm 81672 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 18816 1 snd_pcm_oss
snd_seq_dummy 7428 0
snd_seq_oss 33152 0
snd_seq_midi_event 11904 1 snd_seq_oss
snd_seq 54304 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 3 snd_seq_dummy,snd_seq_oss,snd_seq
usbhid 45792 0
hid 41792 1 usbhid
snd 63688 10
snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
ff_memless 9224 1 usbhid
serio_raw 9860 0
i2c_i801 13596 0
pcspkr 7040 0
psmouse 42268 0
i2c_core 27936 1 i2c_i801
iTCO_wdt 15696 0
soundcore 12064 1 snd
usb_storage 94400 0
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
button 11680 0
intel_agp 31728 0
dcdbas 11952 0
evdev 14208 3
ext3 125072 5
jbd 51240 1 ext3
mbcache 12804 1 ext3
floppy 61672 0
ehci_hcd 36108 0
uhci_hcd 25760 0
e1000e 99748 0
sg 36448 0
sr_mod 19652 0
sd_mod 29376 7
cdrom 37928 1 sr_mod
thermal 22688 1
processor 42304 1 thermal
fan 9352 1
thermal_sys 17728 3 thermal,processor,fan
ata_piix 22660 7
libata 165472 1 ata_piix
scsi_mod 160760 5 usb_storage,sg,sr_mod,sd_mod,libata
dock 14112 1 libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller [8086:29c0] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI
Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network
Connection [8086:10c0] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1278
Region 0: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at fe00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fd00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:020d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fb00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fa00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f900 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:020d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller [8086:2916] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4
port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f800 [size=8]
Region 1: I/O ports at f700 [size=4]
Region 2: I/O ports at f600 [size=8]
Region 3: I/O ports at f500 [size=4]
Region 4: I/O ports at f400 [size=16]
Region 5: I/O ports at f300 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port
SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device [1028:020d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f100 [size=8]
Region 1: I/O ports at f000 [size=4]
Region 2: I/O ports at ef00 [size=8]
Region 3: I/O ports at ee00 [size=4]
Region 4: I/O ports at ed00 [size=16]
Region 5: I/O ports at ec00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8300 GS
[10de:0423] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:0494]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cf00 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing'), (100, 'unstable'), (5, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
