On Mon, Mar 24, 2008 at 08:42:06AM -0400, Jerry Quinn wrote:
> Package: linux-image-2.6.24-1-amd64
> Version: 2.6.24-4
> Severity: normal
>
>
> In my log, I'm seeing about 4 of these messages every 2 minutes. It's
> annoying as it clutters the kernel log and prevents seeing other issues that
> might show up:
>
> Mar 24 08:33:26 cerberus kernel: hda: drive not ready for command
> Mar 24 08:33:26 cerberus kernel: hda: status error: status=0x58 { DriveReady
> SeekComplete DataRequest }
> Mar 24 08:33:26 cerberus kernel: ide: failed opcode was: unknown
> Mar 24 08:33:26 cerberus kernel: hda: drive not ready for command
>
> On my machine, hda is the dvd drive. This is the only ide device attached.
> The hard drives are sata and numbered sda and sdb.
>
> This is the ide section from dmesg:
>
> JMB: IDE controller (0x197b:0x2368 rev 0x00) at PCI slot 0000:02:00.0
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> JMB: 100% native mode on irq 16
> ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> sdb5 >
> sd 1:0:0:0: [sdb] Attached SCSI disk
> firewire_core: created new fw device fw0 (0 config rom retries, S400)
> hda: LITE-ON DVDRW LH-20A1H, ATAPI CD/DVD-ROM drive
> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/66 mode selected
> ide0 at 0xc000-0xc007,0xc102 on irq 16
> Probing IDE interface ide1...
> hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
Does this error still occur with more recent kernel versions?
Cheers,
Moritz
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
