Package: linux-image-2.6.24-etchnhalf.1-686 Version: 2.6.24-6~etchnhalf.5 Severity: normal
I was having frequently kernel oops in etch: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=481346. Now I have installed etch and half and kernel oops are very rarelyi but I've had one today. These are the messages shown in the ssh console I received: Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: Oops: 0000 [#1] SMP Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: Process postmaster (pid: 2918, ti=f6624000 task=f7cce730 task.ti=f6624000) Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: Stack: e5ed7908 00000001 0000073b c02c7885 00000000 00000000 f6a7a6ac 00001000 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: 00002000 0000000d 00000000 00001000 e5ed7908 f6625cf8 fffff000 c49893ec Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: fffff000 00002000 c0194337 00001000 424420e3 c17087c0 0000c000 00000000 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: Call Trace: Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0194337>] __getblk+0x23/0x27e Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0195392>] block_write_begin+0x83/0xe0 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<f895764b>] ext3_get_block+0x0/0xd0 [ext3] Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<f8922b24>] journal_start+0x7d/0xa9 [jbd] Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<f8958add>] ext3_write_begin+0xd9/0x18a [ext3] Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<f895764b>] ext3_get_block+0x0/0xd0 [ext3] Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c015bb09>] generic_file_buffered_write+0x10a/0x5a1 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<f895d987>] __ext3_journal_stop+0x19/0x34 [ext3] Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0190d69>] __mark_inode_dirty+0xc9/0x144 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c015c431>] __generic_file_aio_write_nolock+0x491/0x4f0 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c015c4e5>] generic_file_aio_write+0x55/0xb3 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0180fa0>] do_path_lookup+0x162/0x1c4 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<f8955014>] ext3_file_write+0x24/0x8f [ext3] Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0178593>] do_sync_write+0xc7/0x10a Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0181c87>] open_namei+0x276/0x558 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0135489>] autoremove_wake_function+0x0/0x35 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c01784cc>] do_sync_write+0x0/0x10a Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0178dd8>] vfs_write+0xa1/0x14d Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c01793f3>] sys_write+0x41/0x67 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: [<c0103e66>] sysenter_past_esp+0x6b/0xa1 Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: ======================= Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: Code: 24 2c 8b 5c 24 14 89 44 24 20 2b 44 24 2c 39 5c 24 44 89 44 24 1c 76 08 8b 54 24 68 39 d0 72 1f 8b 45 00 a8 08 0f 84 d2 01 00 00 <8b> 01 a8 01 0f 85 c8 01 00 00 90 0f ba 29 00 e9 be 01 00 00 8b Message from [EMAIL PROTECTED] at Wed Dec 10 15:54:06 2008 ... localhost kernel: EIP: [<c0195071>] __block_prepare_write+0x110/0x37e SS:ESP 0068:f6625cb0 Have a great day Piviul -- Package-specific info: ** Version: Linux version 2.6.24-etchnhalf.1-686 (Debian 2.6.24-6~etchnhalf.5) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Sep 8 06:19:11 UTC 2008 ** Command line: root=/dev/md1 ro ** Not tainted ** Kernel log: hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33 hdc: UDMA/33 mode selected ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:04.2: UHCI Host Controller uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:04.2: irq 10, io base 0x0000d400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized libata version 3.00 loaded. ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:04.3: UHCI Host Controller uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:04.3: irq 10, io base 0x0000d000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:00:09.0: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 eth0: RealTek RTL8139 at 0xb800, 00:40:f4:36:0b:63, IRQ 5 eth0: Identified 8139 chip type 'RTL-8139C' hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 < hda5 > hda3 hdc: max request size: 128KiB hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63 hdc: cache flushes supported hdc: hdc1 hdc2 < hdc5 > hdc3 md: raid1 personality registered for level 1 md: md1 stopped. md: bind<hdc3> md: bind<hda3> raid1: raid set md1 active with 2 out of 2 mirrors Attempting manual resume EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: md1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 7962696 ext3_orphan_cleanup: deleting unreferenced inode 7536649 ext3_orphan_cleanup: deleting unreferenced inode 7536648 ext3_orphan_cleanup: deleting unreferenced inode 7536647 ext3_orphan_cleanup: deleting unreferenced inode 7536646 ext3_orphan_cleanup: deleting unreferenced inode 7536645 EXT3-fs: md1: 6 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport_pc: VIA parallel port: io=0x378, irq=7 Linux agpgart interface v0.102 agpgart: Detected VIA Apollo Pro 133 chipset agpgart: AGP aperture is 32M @ 0xfc000000 Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] input: ImPS/2 Logitech Wheel Mouse as /class/input/input4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Adding 449780k swap on /dev/hda5. Priority:-1 extents:1 across:449780k Adding 449780k swap on /dev/hdc5. Priority:-2 extents:1 across:449780k EXT3 FS on md1, internal journal device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] md: md0 stopped. md: bind<hdc1> md: bind<hda1> raid1: raid set md0 active with 2 out of 2 mirrors kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ** Loaded modules: Module Size Used by nfs 228264 0 nfsd 204432 17 lockd 60968 3 nfs,nfsd nfs_acl 3584 2 nfs,nfsd auth_rpcgss 39904 1 nfsd sunrpc 171484 11 nfs,nfsd,lockd,nfs_acl,auth_rpcgss exportfs 4832 1 nfsd ppdev 8900 0 lp 11204 0 ipv6 242212 27 dm_snapshot 17060 0 dm_mirror 21792 0 dm_mod 56004 2 dm_snapshot,dm_mirror ide_cd 36352 0 cdrom 32672 1 ide_cd floppy 54724 0 button 8528 0 via686a 13868 0 psmouse 36656 0 pcspkr 3264 0 serio_raw 6788 0 i2c_viapro 8468 0 i2c_core 22656 1 i2c_viapro rtc 13148 0 via_agp 10048 1 agpgart 31912 1 via_agp parport_pc 26340 1 parport 34472 3 ppdev,lp,parport_pc shpchp 31220 0 pci_hotplug 27840 1 shpchp evdev 11200 0 ext3 123272 2 jbd 43892 1 ext3 mbcache 8480 1 ext3 raid1 22336 2 md_mod 73652 3 raid1 ide_generic 1280 0 [permanent] ide_disk 15776 8 8139too 25728 0 ata_generic 7556 0 libata 144560 1 ata_generic scsi_mod 141516 1 libata 8139cp 22048 0 mii 5344 2 8139too,8139cp uhci_hcd 23568 0 via82cxxx 8036 0 [permanent] generic 4484 0 [permanent] usbcore 127724 2 uhci_hcd ide_core 108740 5 ide_cd,ide_generic,ide_disk,via82cxxx,generic thermal 16092 0 processor 36840 2 thermal fan 4868 0 ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev c4) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80e7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 40) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80e7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d800 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.4 Host bridge [0600]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 40) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at b800 [size=256] Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0b.0 VGA compatible controller [0300]: S3 Inc. 86c764/765 [Trio32/64/64V+] [5333:8811] (rev 54) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M] Expansion ROM at 50000000 [disabled] [size=64K] -- System Information: Debian Release: 4.0 APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'oldstable'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.24-etchnhalf.1-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages linux-image-2.6.24-etchnhalf.1-686 depends on: ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-etchnhalf.1-686 recommends: ii libc6-i686 2.3.6.ds1-13etch7 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-2.6.24-etchnhalf.1-686: false linux-image-2.6.24-etchnhalf.1-686/postinst/old-dir-initrd-link-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/initrd-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/postinst/kimage-is-a-directory: linux-image-2.6.24-etchnhalf.1-686/preinst/abort-install-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/prerm/removing-running-kernel-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-has-ramdisk: linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-error-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/postinst/old-initrd-link-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/bootloader-initrd-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/elilo-initrd-2.6.24-etchnhalf.1-686: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-etchnhalf.1-686/preinst/abort-overwrite-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/prerm/would-invalidate-boot-loader-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/overwriting-modules-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/postinst/old-system-map-link-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/postinst/depmod-error-initrd-2.6.24-etchnhalf.1-686: false linux-image-2.6.24-etchnhalf.1-686/preinst/lilo-initrd-2.6.24-etchnhalf.1-686: true linux-image-2.6.24-etchnhalf.1-686/preinst/failed-to-move-modules-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/postinst/bootloader-test-error-2.6.24-etchnhalf.1-686: linux-image-2.6.24-etchnhalf.1-686/postinst/create-kimage-link-2.6.24-etchnhalf.1-686: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
