--- Begin Message ---
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-9
Severity: normal
After upgrading from 2.6.26-8 to 2.6.26-9, there is often a 5 minute
freeze at blank screen when a resume is initiated after suspend-to-ram
for a while. The problem can often be reproduced by issuing the command
"echo -n mem > /sys/power/state", wait a minute or so and hit the
wake-up key ("Fn" key for my Thinkpad X61s). The resume process would
stop at a blank screen with single text cursor for 5 minutes without any
observable activities. Then, it would continue as normal. Downgrading
back to 2.6.26-8 eliminates this problem.
Chun-Chung Chen
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-8) ([EMAIL PROTECTED]) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9
14:16:53 UTC 2008
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 root=/dev/mapper/vg-w0 ro
acpi_sleep=s3_bios quiet resume=/dev/mapper/vg-s0
** Not tainted
** Kernel log:
[ 1798.027789] groups: 0 1
[ 1798.027795] domain 1: span 0-1
[ 1798.027798] groups: 0-1
[ 1798.027803] domain 2: span 0-1
[ 1798.027806] groups: 0-1
[ 1798.027812] CPU1 attaching sched-domain:
[ 1798.027815] domain 0: span 0-1
[ 1798.027818] groups: 1 0
[ 1798.027823] domain 1: span 0-1
[ 1798.027826] groups: 0-1
[ 1798.027830] domain 2: span 0-1
[ 1798.027833] groups: 0-1
[ 1797.946330] CPU1 is up
[ 1798.159658] Switched to high resolution mode on CPU 1
[ 1799.715839] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 1799.797327] PM: Writing back config space on device 0000:00:02.0 at
offset 1 (was 900007, writing 900003)
[ 1799.830480] PM: Writing back config space on device 0000:00:02.1 at
offset 1 (was 900000, writing 900007)
[ 1799.842073] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 1799.842090] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 1800.128044] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 1800.128062] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 1800.128199] usb usb2: root hub lost power or was reset
[ 1800.128239] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level,
low) -> IRQ 21
[ 1800.128254] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1800.128387] usb usb3: root hub lost power or was reset
[ 1800.142456] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level,
low) -> IRQ 22
[ 1800.142456] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1800.157458] PM: Writing back config space on device 0000:00:1b.0 at
offset 1 (was 100106, writing 100102)
[ 1800.157528] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level,
low) -> IRQ 17
[ 1800.157548] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 1800.157689] PM: Writing back config space on device 0000:00:1c.0 at
offset 1 (was 100107, writing 100507)
[ 1800.157813] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1800.157928] PM: Writing back config space on device 0000:00:1c.1 at
offset 1 (was 100107, writing 100507)
[ 1800.158052] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1800.158075] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 1800.158090] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1800.158225] usb usb5: root hub lost power or was reset
[ 1800.158263] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level,
low) -> IRQ 17
[ 1800.158277] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1800.158408] usb usb6: root hub lost power or was reset
[ 1800.174201] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level,
low) -> IRQ 19
[ 1800.174218] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1800.174452] PM: Writing back config space on device 0000:00:1e.0 at
offset 1 (was 100005, writing 100007)
[ 1800.174517] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1800.174742] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level,
low) -> IRQ 16
[ 1800.189305] PM: Writing back config space on device 0000:00:1f.2 at
offset 1 (was 2b00007, writing 2b00407)
[ 1800.189441] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1801.363659] PM: Writing back config space on device 0000:05:00.1 at
offset 4 (was 0, writing f8301000)
[ 1801.363676] PM: Writing back config space on device 0000:05:00.1 at
offset 3 (was 800000, writing 802000)
[ 1801.363696] PM: Writing back config space on device 0000:05:00.1 at
offset 1 (was 2100000, writing 2100006)
[ 1801.419570] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]
MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1801.435886] PM: Writing back config space on device 0000:05:00.2 at
offset 4 (was 0, writing f8301800)
[ 1801.435902] PM: Writing back config space on device 0000:05:00.2 at
offset 3 (was 800000, writing 804000)
[ 1801.435921] PM: Writing back config space on device 0000:05:00.2 at
offset 1 (was 2100000, writing 2100006)
[ 1801.435976] ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 1801.516635] ata3: SATA link down (SStatus 0 SControl 300)
[ 1801.730766] sd 0:0:0:0: [sda] Starting disk
[ 1801.753779] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1801.755565] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 1801.755572] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1801.755761] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 1801.755767] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1801.759523] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 1801.759530] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1801.759732] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 1801.759739] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1801.761079] ata1.00: configured for UDMA/100
[ 1801.764280] ata1.00: configured for UDMA/100
[ 1801.764290] ata1: EH complete
[ 1801.764414] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors
(120034 MB)
[ 1801.764455] sd 0:0:0:0: [sda] Write Protect is off
[ 1801.764460] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1801.764527] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1801.764595] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors
(120034 MB)
[ 1801.764632] sd 0:0:0:0: [sda] Write Protect is off
[ 1801.764637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1801.764702] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1802.861962] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 1802.861975] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1802.863590] Restarting tasks ... done.
[ 1803.785703] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 1803.858331] Registered led device: iwl-phy0:radio
[ 1803.858361] Registered led device: iwl-phy0:assoc
[ 1803.858409] Registered led device: iwl-phy0:RX
[ 1803.858455] Registered led device: iwl-phy0:TX
[ 1803.873479] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1804.088753] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1818.134430] wlan0: Initial auth_alg=0
[ 1818.134430] wlan0: authenticate with AP 00:18:74:8a:8f:30
[ 1818.135828] wlan0: RX authentication from 00:18:74:8a:8f:30 (alg=0
transaction=2 status=0)
[ 1818.135828] wlan0: authenticated
[ 1818.135828] wlan0: associate with AP 00:18:74:8a:8f:30
[ 1818.142031] wlan0: RX AssocResp from 00:18:74:8a:8f:30 (capab=0x431
status=0 aid=1)
[ 1818.142043] wlan0: associated
[ 1818.142063] wlan0: CTS protection enabled (BSSID=00:18:74:8a:8f:30)
[ 1818.142071] wlan0: switched to short barker preamble
(BSSID=00:18:74:8a:8f:30)
[ 1818.143854] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1834.280054] wlan0: no IPv6 routers present
[ 2254.088508] wlan0: switched to long barker preamble
(BSSID=00:18:74:8a:8f:30)
[ 2386.021086] wlan0: switched to short barker preamble
(BSSID=00:18:74:8a:8f:30)
** Loaded modules:
Module Size Used by
i915 35072 2
drm 91488 3 i915
rfcomm 38176 2
l2cap 23936 9 rfcomm
bluetooth 57124 4 rfcomm,l2cap
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
ipv6 288328 26
fuse 53184 1
dm_crypt 17032 0
ide_pci_generic 9220 0 [permanent]
pcmcia 38680 0
snd_hda_intel 434776 1
piix 12424 0 [permanent]
ide_core 128284 2 ide_pci_generic,piix
sdhci 19460 0
yenta_socket 27916 1
arc4 6272 2
ecb 7296 2
rsrc_nonstatic 14080 1 yenta_socket
ohci1394 32564 0
crypto_blkcipher 21636 2 dm_crypt,ecb
mmc_core 52448 1 sdhci
ieee1394 93816 1 ohci1394
psmouse 42268 0
pcmcia_core 41508 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_pcm_oss 41760 0
i2c_i801 13596 0
serio_raw 9860 0
snd_pcm 81800 2 snd_hda_intel,snd_pcm_oss
i2c_core 27936 1 i2c_i801
snd_mixer_oss 18816 1 snd_pcm_oss
pcspkr 7040 0
ata_generic 10116 0
iTCO_wdt 15696 0
iwl3945 92916 0
firmware_class 12544 2 pcmcia,iwl3945
mac80211 162864 1 iwl3945
snd_seq_dummy 7428 0
cfg80211 30224 2 iwl3945,mac80211
snd_seq_oss 33152 0
snd_seq_midi_event 11904 1 snd_seq_oss
bay 9216 0
snd_seq 54304 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
ac 9352 0
snd_timer 25744 2 snd_pcm,snd_seq
battery 16904 0
video 24084 0
output 7808 1 video
snd_seq_device 11668 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd 63688 10
snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore 12064 1 snd
button 11680 0
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
e1000e 99748 0
uhci_hcd 25760 0
ehci_hcd 36108 0
intel_agp 31728 1
thinkpad_acpi 64404 0
led_class 8968 2 iwl3945,thinkpad_acpi
evdev 14208 7
nvram 12556 1 thinkpad_acpi
ext3 124688 2
jbd 51240 1 ext3
mbcache 12804 1 ext3
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_snapshot 19400 0
dm_mod 58864 11 dm_crypt,dm_mirror,dm_log,dm_snapshot
sd_mod 29376 3
thermal 22688 0
processor 42304 3 thermal
fan 9352 0
thermal_sys 17728 4 video,thermal,processor,fan
ahci 32520 2
libata 165472 2 ata_generic,ahci
scsi_mod 160760 2 sd_mod,libata
dock 14112 2 bay,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960
Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Lenovo T61 [17aa:20b3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if
00 [VGA controller])
Subsystem: Lenovo T61 [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Lenovo T61 [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit
Network Connection [8086:1049] (rev 03)
Subsystem: Lenovo Device [17aa:20de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe025000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T60 [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe226c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
Audio Controller [8086:284b] (rev 03)
Subsystem: Lenovo ThinkPad T61 [17aa:20ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dc100000-dfcfffff
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family)
USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T61 [17aa:20ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=08, sec-latency=32
I/O behind bridge: 00004000-00007fff
Memory behind bridge: f8300000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HBM (ICH8M-E) LPC
Interface Controller [8086:2811] (rev 03)
Subsystem: Lenovo T61 [17aa:20b6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master
SecP PriP])
Subsystem: Lenovo ThinkPad T61 [17aa:20a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin C routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18e0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ide-pci-generic, piix, ata_generic
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM
(ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01
[AHCI 1.0])
Subsystem: Lenovo ThinkPad T61 [17aa:20a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 1277
Region 0: I/O ports at 1c30 [size=8]
Region 1: I/O ports at 1c24 [size=4]
Region 2: I/O ports at 1c28 [size=8]
Region 3: I/O ports at 1c20 [size=4]
Region 4: I/O ports at 1c00 [size=32]
Region 5: Memory at fe226000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus
Controller [8086:283e] (rev 03)
Subsystem: Lenovo ThinkPad T61 [17aa:20a9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe227400 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c40 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
3945ABG [Golan] Network Connection [8086:4227] (rev 02)
Subsystem: Intel Corporation Device [8086:1010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1276
Region 0: Memory at dfcff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
05:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Lenovo Device [17aa:20c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=05, secondary=06, subordinate=07, sec-latency=176
Memory window 0: f4000000-f7fff000 (prefetchable)
Memory window 1: 80000000-83fff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
05:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394
Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:20c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f8301000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
05:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
Subsystem: Lenovo Device [17aa:20c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f8301800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.92l tools for generating an
initramfs
ii module-init-tools 3.4-1 tools for managing Linux
kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-10 GRand Unified Bootloader,
version
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
* linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64:
false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
* linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64:
false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64:
true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64:
true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64:
true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
--- End Message ---
